Satellite P205: Touchpad does not work when the new adapter is connected

Similar Questions

• Satellite Pro L20: battery not charge when the power adapter is connected

  Hello

  all advice appreciated.

  I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

  There are two recent occurrences that coincide with this problem, I try to eliminate:

  1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

  2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

  I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

  I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

  see you soon
  Chris

  First, please check if the other are lit.
  If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

  > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
  If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

  So I really don t see any problems with the charge process.

  Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

• Satellite L655 - sound does not work on the new install of Windows 7 Pro x 64

  Howdy all,

  I bought a Newegg L655-S5111, which was on sale, put an SSD, and then installed a legitimate copy of Windows 7 Professional 64 - bit, I got from my current employer (I'm a computer scientist). I've updated to the latest revision of the BIOS (1.70), and I have all the updates installed Windows, all drivers installed, including the correct drivers Conexant HD Audio and ATI HDMI Audio. Unfortunately, the sound does not work. Sound works briefly during my first install of Windows 7, then I cut it up until I could get it set up with a helmet. When I disabled it, she had stopped working.

  This laptop is less than 3 weeks at this point, old and I get no audio on headphones or speakers, even if Windows displays clearly no problems with the drivers, they have the latest version on a new installation, and I can see the audio mixer game. The laptop built-in microphone captures sound as well. I think that's probably not a matter of the physical interconnection, but more likely a software problem, I just have trouble identifying where it is.

  I have also no related error message than any where in the case of newspapers.

  Post edited by: ADMIN

  Can you please do a test and install original recovery image Toshiba, that you got with your laptop on this new SSD, just to see if it will work with the original image.

  Recovery image contains all the necessary drivers and OS is perfectly configured so each piece of hardware in your laptop should work correctly.

• Satellite A30 161 does not work when the battery is installed

  Hello

  I have a problem with my Satellite A30-161. The laptop works perfectly without the battery installed. With the battery installed and the AC adapter plugged the power supply and battery (light orange) are turned on.

  When turn on/off, as soon as WXP loaded the battery light turns off and the laptop turns off. With battery only laptop does not start. There is no dirt on the heat sink and it doesn't seem to be a problem with the connector DC and power lights still on.

  Any ideas?

  Hello

  This behavior is not easy to give an accurate diagnosis, but according to your description, I assume that there is a problem of electronic power supply. Just using special diagnostic tool, it is possible to check if there is a problem serious.

  To be honest, I don't think you can do it alone. The only thing you can try is to test it with new battery. Maybe you should contact the service authorized in your country. talk with them and you will see what they say.

• Satellite A120: Microphone does not work when the power cable is unplugged

  I have a Toshiba Satellite Pro A120, which has just begun to play up...

  I regularly record music of my DJ Mixer in microphone of my laptop entry, recording in Adobe Audition.

  Because the power supply makes a buzzing sound, I can't register with the power cable plugged... If I always record with the unplugged power cable, running off battery.

  I've never had any problems before, but what has caused the problem, I now, was earlier the battery ran out while recording, put the laptop into hibernation mode.

  Since then, I can't register with the power cable disconnected. He recorded only with the cable - which is not a good cause snoring.

  It is not a problem with hearing, because in Windows Vista its implemented the problem proved too. As soon as I unplug the power cable, microphone disappears from view.

  I used to work in IT support, so I'm not a technophobe - but I can't for the life of me works why it would suddenly start to occur, power is not related to the entrance it is micro... !

  One of you lovely people have ideas? I checked power options and the Device Manager to see if theres no hardware issues, but there isn't.

  I also reinstalled my sound card drivers.

  It's strange. I guess you tried a boot cold fresh. Hibernation can sometimes cause problems with the devices.

  Try to update the BIOS.

  If all else fails, you may need to reinstall Windows. (Backup your data and run recovery by holding down the button reset during power on)

• Touchpad does not work after the new installation of windows 8.1

  Hi, I have a hp envy sleekbook m6 model. in any case since I installed windows 8.1 cool my touchpad works until a point. Ill install the driver and it works fine until I have shut down the laptop computer, then restart. IM pretty sure that the driver is updated automatically and does not properly. Any help would be greatly appreciated.

  My model: HP ENVY m6-k010dx

  Hello again loplop8989l,

  Thanks for the quick response!

  Since you are able to use your TouchPad before restarting your computer, I recommend that you follow this document on How to perform a boot in Windows. This should help

  If the problem persists, I suggest to restore your system to a restore point when you first install the drivers for your TouchPad. To do this, please follow this document on using Microsoft System Restore (Windows 8).

  Once you have restored your system to when the pilots first TouchPad installation, please follow this resource on how to activate the update or disable automatic so only with the help of HP Support Assistant (Windows 8). This should help to disable automatic updates and check to see what firmware to download individually. Please install each update individually, taking note of update causes incompatibility of software with your TouchPad.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• L855-135 satellite display brightness does not work using the new ATI driver

  Hello

  I just bought the L855-135 with a Radeon HD 7670 M and wanted to update the graphic with map
  the last driver AMD. After that, I realized that the brightness setting didn t work anmore. So I uninstalled
  the new driver and installed again the old driver from this site. Now, the brightness setting works fine again but I Don t really want to get stuck on this older version of the driver. Its around the age of 8 months. Before I bought my laptop I've never heard their update policity. Can someone tell me when they intend to update their-own-amd-drivers toshiba? I really want some new drivers but I Don t want to lose the ability to adjust the brightness. For me, it's a reason to give the laptop back, but I like really this laptop with the exception of its own pilots.

  Can someone tell me how long it will take to get a few new drivers? And I mean not more recent that the 'old' but still 6 months of NEW drivers.

  Thank you.

  > After I realized that the didn t of brightness adjustment works more. So I uninstalled the new driver and installed the old driver from this site again. Now, the brightness setting works fine again but I Don t really want to get stuck on this older version of the driver.

  I found another thread on the same topic.
  It seems that the command buttons FN brightness don t work using the NON-Toshiba graphics card driver.

  You know this Toshiba page graphics card driver is a driver updated, created and configured especially for models of Toshiba laptops.
  This driver supports protection against overheating. Other drivers don t

  However, it seems that there is no other solution than to use the Toshiba configured and modified drivers.

• Satellite P100-257 does not work with the new drive HARD WD SATA II 320 GB

  Please could someone knows how to solve my problem.
  I bought new HARD drive to upgrade my Toshiba Satellite P100-257:
  Western Digital SATA II WD3200AAKS 320 16 MB
  (Originally was installed Toshiba MK6034GSX 60 GB HARD drive)
  When installing Windows XP (from Toshiba disk recovery or all other disks), when the Installer starts copying the files to the temporary directory HDD (after HDD format) encounter a problem like "cannot write files to the HARD drive.
  I tried to format the drive before installation (even to split to 2 smaller logical drives).
  Also I have updated the BIOS at 2009-03-04.
  But nothing changes.
  What is the problem?

  Hello

  It seems that the HARD drive has been recognized because you can receive the error message about the Master Boot Record.

  I think that there is something wrong with the partitions on the HARD disk.
  I put t know how you formatted the HARD drive, but I think that you must first reinstall the operating system on a partition in order to check the functionality of the HARD drive.

  Once you have started using the Windows XP disk, try to create more than one partition and this format to NTFS. Then follow the installation of the OS!

• Satellite A350 - Touchpad does not work, but an external mouse works

  Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).

  I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.

  What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*

  Thank you, and sorry for my bad English. :-(

  Hello!

  The touchpad does appear in Device Manager or you have here yellow exclamation points?

  Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
  Did you check that?

  In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Touchpad does not work in the guest account

  My touch pad (ASUS laptop with Vista) does not work when the computer opens under prompt, but it is very good when plate under the host icon.

  How can I the touchpad works again in the comments?  what I can remember, t move cursor in the comments section.

  Thanks to the one who has a handle on this

  Ian

  Hi Ian,

  1. when it last work very well?

  2. are you referring to the guest account or standard account?

  If the problem is on a guest account, try disabling the guest account, restart the computer, and then turn on the guest account and check if the touch pad to work.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-the-guest-account-on-or-off

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My touchpad does not work and the usb mouse works

  After connecting with a USB key, my touchpad does not work and the USB mouse works

  Hi, Dieudonné,

  Make and model of computer?

  Have you tried to uninstall the drivers for the touchpad.  Update?

• Acorn TV does not work on the new Apple TV

  So disappointed that the Acorn TV app does not work with the new Apple TV we just bought. We have subscribed on iTunes and nothing happens when you try to activate the software. We can look good on the MacBook, iPad and iPhone. Verified the purchase on iTunes account and that's fine. Contact Acorn and say it is a matter of Apple.

  Strange that I have to use Chrome to even write this question. Safari and hers do not work with the Support pages. I'll send in the comments.

  I'm resetting Apple TV now. We have been with the Apple TV since version 1. I hope that we can make this work!

  How would work appletv mount 1 app on the job?

  each app to live their own lives the appletv core do not even know what applications do they just

  Use the ios network to get their content

• The license we use for an old PC no longer valid for the new PC - uninstall of the old PC and still does not work on the new PC

  Hello

  The license we use for an old PC no longer valid for the new PC - uninstall of the old PC and still does not work on the new PC

  A disable the old installation before you uninstalled?  If this isn't the case, then it is always considered as enabled, which could mean that you have all your activations in use.  You can contact the Adobe Support via chat and ask them to reset your activations.

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

  If none of this helps can you identify which software it comes and what error messages you get when you try to run on the new machine?

• My Lenovo ThinkPad(red scroll) scroll function does not work in the new Firefox 4. It worked very well at point 3.6. Can you please fix this because it is a very important feature.

  (Middle button) scroll feature does not work on the new firefox 4. For this reason, so I need to move the scroll bar to move the page. It's very irritating problem, if you are a guy who uses the middle button to scroll. Can you if you please fix this...

  Thank you!!!

  I've updated to Firefox 4.01 today and the Center knob on my Lenovo T400 does more. I downloaded the updated Ultranav utility and the Ultranav driver for my T400 by http://www-307.ibm.com/pc/support/site.wss/MIGR-72858.html , then uninstalled the 'Thinkpad Ultranav Driver' to add/remove programs, rebooted and then installed the update utility and driver (another reboot) and now it works perfectly.

  So happy to get it working again.

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...