Satellite P25: How to reinstall the original software without original car work?

Similar Questions

• Satellite A500 - how to reinstall the original Windows 7?

  Hello

  I bought the Toshiba Satellite A500-19U and Windows 7. I tried to create a new partition, then I've done assets so he hid, after restarting the laptop, I had a black screen and massage (bootmgr is missing)

  So I installed another copy of Windows 7 just to connect to my computer. Then after the copy of Windows 7 installation I made inactive D if it appeared there is file recovery. So my question is: as long as I have this file I want to reinstall the original Windows 7 I have in the drive hard, but how?

  When I press F and repair, then it does not give the last option of HARD drive recovery! Why and I have the recovery file?

  Please help me

  Hello

  I guess you didn't read the manual user, first of all. I m right? ;)

  Well, normally HARD drive recovery you can start if you go into the advanced boot menu (F8) and select Repair my computer. After that, you can choose the option of HARD drive recovery.

  But I guess that this isn't possible anymore because you have installed another copy of Windows 7. If this menu isn't available anymore.

  The only option to restore factory settings using the Toshiba recovery disc. Did you create it? This can be through with preinstalled creative drive recovery Toshiba but if you didn t create it, it s too late now, too.

  The only option now is to order a new drive Toshiba Recovery directly. So take a look in your user manual.

• Re: Satellite A300 - how to restore the original condition?

  Hello

  My computer freezes for a second or 2 from time to time and Toshiba support told me it might be a software problem. I don't think, because he began the day I bought the laptop and the display driver keeps on the work stoppage, but because I said that if it's a software problem.
  I would have to pay for it, I want to try everything before sending it for repair. This is why I would like to restore my Satellite in its original state as he was just at the moment where I bought it.

  So basically I have 2 questions:

  1 - does anyone have any idea why it keeps freezing on me? And what I should try to do to fix it?
  2. can someone tell me how to restore the laptop to its original state?

  Thank you very much Dina

  Hello

  To determine if it of a software problem or not, you need to restore the factory setting and if it doesn't work you can go to an authorized service provider. They can repair the laptop for you.

  The factory settings can be restored with the Toshiba recovery disc. I guess that your laptop has been delivered with Windows Vista, if you have options to restore factory settings: the Toshiba disk recovery or HARD drive recovery service.

  HARD drive recovery function formats the first partition of your laptop and install Vista again with all the drivers and tools of Toshiba. It is an image that is stored on the second partition of HARD drive in the folder HDDRecovery.
  If you go into the advanced with F8 boot menu after you start the computer, you can start this feature of Toshiba. And then select Repair my computer and some Windows files will be loaded. Then, you can choose the function to drive HARD Toshiba Recovery and follow the instructions on the screen.

  The Toshiba Recovery disk, you must create first, or have you done this yet? Normally, you get a reminder of recovery message after the first start of the laptop that you must burn this disc. Therefore, you must the preinstalled Toshiba recovery disc creator and the image in the folder in HARD drive recovery will be burned on the disc. Then you have a startup disk that can restore the factory settings and HARD whole disc formats then back up your data first!
  The recovery disk is necessary if you have a new HDD or Windows start doesn t. Otherwise, you can use HARD drive recovery.

  I hope I could help a bit and now you understand how to restore the factory settings.
  If you have any other questions, please let us know! :)

  Good bye

• Satellite A200 - how to install the bluetooth software?

  I got this laptop Satellite A200 of Australia. Recently, he had sum probs, so I restored it 2 factory settings using the backup option by pressing the 0 key... but later, I tried 2 find its Bluetooth software but I have strength c it doesn't matter where... anyone know how to install it or where it is located on the computer laptop d.
  Thank you

  Hmm. are you sure your laptop was equipped with an internal BT module?
  To my knowledge, not any of the A200 series support the BT

  However, you ask the BT (pilot) software.

  Here you are:
  http://APS2.toshiba-tro.de/Bluetooth/

  It is a Toshiba BT portal. You will find the latest version of the BT software.

• Satellite P10: How to get the restore software?

  What is the best way to get the software to restore my Satellite P10 - I lost the original disk.

  Tools and drivers Toshiba download on the Toshiba site.
  If you want to buy the CD of restoration, you can order it from the service partner in your country.

• Satellite L300 - how to install the webcam software?

  I have a Satellite L300 with an internal webcam. Recently I had to install a new HARD drive. I didn't have a recovery disc, so I just installed Vista on it.

  Is there a way I can install the webcam software?

  Hello

  I also have Satellite L300 and you can download the software of the webcam from the Toshiba page directly. Just follow this link and clicks:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Everything you need you will find! ;)

• Re: Satellite L300 - how to reinstall the SATA drivers?

  Hi all

  I have a L300 I downgraded to XP. It runs with the SATA controller in compatibility mode and are sent here a lot, it's slow.

  I read you need drivers intel for her and so I downloaded the and down them and had an error "your computer does not minimum requirements.

  Tried in both safe mode and got the same error.

  Now I could try to use nlite and I've used it before, but the file I have is an executable and not an inf and files related to a driver, so I don't know how to add it to nlite. I'd rather do not re - load again if possible.

  So the simple question is how I install the AHCI SATA drivers so I don't have to run in compatibility mode.

  Thank you

  Mick

  Hello

  I think that you should use the forum search. You will find the sufficient number of threads how to install SATA drivers

  In addition this s one interesting article step by step:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

• How to reinstall the backup software?

  Hello

  I follow the instructions for backup and restore of windows 7, but I couldn't reinstall my software, I only able to view the files that I save. For example, before restoration windows 7, I had software to backup such as Adobe Illustrator, Photoshop, microsoft officice... etc, but now, after I restored it I see only the files that I saved but unable to reinstall these programs. I thought that the backup was supposed to save all including installation of software installation?

  In addition, my previous resolution looks better and clearer, but after I had reinstalled windows 7, the resolution came out and I tried to make the adjustment but it is impossible to restore the previous version.

  Someone please help me, thanks.

  Kind regards

  Seven Tan

  The backup process saving the user files so that you can restore them if necessary. This does not back up program files. To avoid the problems associated with the programs, it is mandatory to keep all the files for installing software on an external drive and purchase details (where purchased or downloaded, price paid, license numbers).

  You can create an image of your installation via the control panel / backup and restore. You can use this image to restore your computer exactly as it was when you created the image. Your data will be set as soon as it was when you created the image.

• Satellite A100: How to reinstall the operating system with recovery CD?

  Hi guys,.

  My laptop (8 months) has been crashing (Windows XP) lately and I tried to use the product recovery CD but nothing happened (the laptop failed to boot from the CD, instead, she starts toward the window of connection for Windows XP Home edition). When I open the CD in windows Explorer, then I realized it was empty. Is it supposed to be empty?

  Even if the laptop came with a second CD, "Express Media Player Recovery CD", I think that's going to be for recovering pre-installed software supplied with the system.

  I guess I can contact Toshiba for another free product recovery CD (or are they supposed to be two?) my system is still under warranty.

  Please I need confirmation on this asap.

  Post edited by: [email protected]_UK

  Hello

  It's very strange, I can't believe that the Toshiba Recovery CD is empty!
  There must certainly be a ghost image.
  Very, very strange and mysterious

  The Express Media Player recovery CD retrieves only the Media Express Player but not the entire operating system!
  I also recommend to ask the ASP in your country for a replacement CD recovery.
  Perhaps you could send guys the empty recovery CD because they do not believe! ;)

• Satellite A300 - how to recover the operating system without a recovery disk?

  First of all, sorry for my very bad English.

  I bought a laptop Toshiba Satellite A300, PC 9 months ago. I had problems with a virus and result is that despite clean-up and disinfection, the computer is still infected and I refused access to the hard drives and regedit.

  I thought restoring the operating system factory preinstaled (hopefully, this is the solution and not the formatting) and Barrie told me to check out http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  I did it, but the PC it's imposible because there is no files. I don't have a rescue CD (if newbee).

  What can I do?

  Hello

  Usually the A300 (European series) has been equipped with HARD drive recovery option which would be you allows to recover the laptop using the files on the HARD drive. But if this is not possible while something went wrong with the maybe HDD it s due to the infection by the virus

  In any case if you are not able to recover the laptop using the recovery of HARD drive you need the recovery disc.
  You can order it as suggested by resident on the other hand, you can use the MS Windows Vista disk and can download driver Toshiba page.

• How can I uninstall adobe CD and reinstall the original adobe acrobat reader software

  How can I uninstall adobe CD and reinstall the original adobe acrobat reader software

  Sign out of your account... Uninstall... to run vacuuming...

  -non-Cloud programs, to disable the service before uninstalling

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and before reinstalling is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  Download and install the old version by entering your serial number when required

  kglad links in response to #1 here can help https://forums.adobe.com/thread/2017859

• InDesign CS3 crashes when I export a PDF file. I've updated to 5.0.4, but it always crashed. I bought it as part of the Design Premium package. How do I InDesignCS3 to uninstall and reinstall the original software?

  Hi, the title says it all

  I tried to find how to uninstall CS3 Design Premium, and then reinstall the original software in the hope that this will eliminate the problem of crash, that started yesterday on the Adobe site.

  You help will be very appreciated.

  Alison

  Thanks - I did download successfully, but always feared that the same problem would happen again, so just upgraded to Cloud.

  Thank you very much

  Alison

• How can I reinstall the original operating system was on my Fujitsu Lifebook without the CD?

  I have a Fujitsu Lifebook series S, model S7211, and I had a bug on the computer, so I had to reinstall the OS, but my computer never came with a disc as it was a gift, so I had to install another OS that was intended for another computer, a DELL computer. I noticed right away that some of the functions that the computer was previously working is no longer, and it doesn't bother me at first, but now my computer seems to run slower, and I wanted to find a way to reinstall the original OS. I have the product key, but I can't find a way to download Windows Vista business on the Windows website.

  Can someone direct me to a download link or the part of the windows Web site I where can I enter my product key and to create a disk so I can install it?

  Hello

  You cannot use a Dell disk on a Fujitsu laptop.

  There are several ways to reinstall Vista, see what you can use..

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there may always be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How to reinstall the operating system on a Curve 8310 blackBerry smartphones?

  There seems to be missing elements of my OS (vs 4.5.0.182).  How can I reinstall the original operating system to get everything working again?

  Hello and welcome to the community!

  From a PC, you can install any compatible OS package (for example, for your exact model of BB number) to a BB via this procedure:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...

  Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC. You can even use a different OS package carriers simply insert, between steps 1 and 2, the deletion, on your PC, a file named PROVIDER. XML. remember that you remove from your PC, no matter what other packages devices OS BB as having more than one installed on the PC can cause conflicts with this procedure.

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• Re: How to install the backup software?

  I have Toshiba Recovery DVD for Windows XP of origin. But after the installation in backup softare avialble in system tools.
  I tried to install it from adding a program into the Panel control or extarct from the DVD. Also, I tried to download it from the Microsoft Web site, but there is no chance.

  Can someone tell me how to install the backup software?

  Concerning

  Check http://support.microsoft.com/kb/308422
  Maybe this article will help you.