Satellite P30-109 works to power when the AC adapter is plugged
When I unplug the plug charger, it automatically goes to the battery: so far nothing wrong with it;
The point is that when I have the rear the charger plug into the socket on the battery until when, after about 20 minutes remaining with the high performance plan, begins to 'pip' (less then 10% battery) and goes into 'coma '.
Normal discussion it should go on net power and automatically fill the battery
Just after I stopped it, I disconnect the battery and reconnect it, then it starts to load again.
The battery is not new, according to Everest 65% usage level; It takes 20 minutes at this time for me more than enough. I just need to move the pc from one room to another for a presentation.
Although I wouldn't use the battery I still have a question: the cap on the back of the laptop is not really tight: sometimes he loses contact: without battery, it would be abruptlly pass.
Hello
Looks a bit like an electronic power supply problem
I put t think she s adapter connection an AC loose. It looks more like a motherboard problem
One question; What version of BIOS that you use?
Please check if the latest version of BIOS is available and if necessary to update.
Hope it helps, if not then a few portable tests are required.
Tags: Toshiba
Similar Questions
-
Satellite Pro U400-247 - noise static when the AC adapter is plugged
Hello
I got by Satellite Pro U400-247 and you have a problem with the sound.
Everytime I plugg in adapter (external power supply) there is a kind of droning noise static noise when I use the audio out (headphones).
Does anyone have a solution for this problem?
Thank you
MarcusHello
I guess that's not happed running the laptop on battery only. Right?
I think that this issue is released to a grounding problem.
I read different forums on this kind of question it.
Usually use the 3 cord power cable should help get rid you of this noise.In your case I would recommend asking for cord 3 power cable (maybe you need another adapter that supports the 3-wire power cord) to a Toshiba authorized maintainer.
-
Hello
I have a problem with vga output. When I'm working on the battery and connect my laptop to external monitor is ok, but when I connect adapter then start waving also bluetooth and wlan is not working properly. In other cases when I disconnect laptop battery and connect the AC adapter it works correctly.
Thanks in advance
Hello
Can you please describe more precisely what is happening here? Does not properly is a rather general statement.
-
Performance of WLan Z830 satellite falls down when the AC adapter is plugged
Hello
When I plug my whole wifi power cord breaks. 54 MB to 2Mb!
In the Power Options, everything is the same as the answer key, battery with or without.
Any ideas?
My camera is a
My laptop:
SATELLITE Z830-10J ZB040302HHow about WLan driver update?
Have you tried that?To be honest I have never heard of such symptoms when the power adapter has been inserted
Of course, I read on the issue when the power adapter has been removed from power saving -
My desire to turn with pluged ac adapter and the battery in the laptop... I tried the charger and its fine... the power outlets are also very good... the lamp beside the AED charger on not even when the battery is inside the laptop... as soon as, I get out the battery with the charger plugged, the light comes on then and the laptop then turn on when I press the power button. It loads for a few seconds and stops when the laptop is turned on without the battery and I have fix the battery in there. I do not understand this because the battery lasted for four hours without plugged the previous night and when he so weak and I wanted to load this problem... pls need your help guys... Thank you
Hi @Manaseh_Tello1,
Please become a member of the HP's Support Forums. I understand that you have a problem with the computer that you want to start with the battery connected. I'll be happy to help you.Please post the complete product and the operating system on your computer. Check out the following, if you need assistance with this information.
How can I find my model number or product number?
Is the Version of Windows on my computer 32-bit or 64-bit?
Will you please get back to me with the information above, so I can help you better. -
Satellite L300 crashes when the AC adapter is plugged
As long as the laptop is running off the battery voltage, it works perfectly.
The moment where that I plug in the power adapter, it crashes. If the laptop is turned off, the adapter can be plugged in and it will charge the battery as usual.
The adapter was traded with a new unit and this has not solved the problem.Then, the question seems to be on the system board.
Someone out there has experienced this and, more precisely, is the ONLY solution to buy a new card system?Hi mate
I agree. Seems to be a problem with the motherboard because new AC adapter didn't solve this problem.
Maybe something wrong with the DC IN jack
On the other hand, there must be something wrong with the party that would be detected by the POST (power on self-test) because it affects the system and force the laptop to closeI put t see other solutions as to get in touch with a local Mobile ASP technician and to check the mobo, I think it should be replaced if it s the value case because the mother board is not a party at low prices
-
Satellite A100 does not supply power to the top
I have a client who has the Satellite A100 (PSAA2C-LE100E) and its not turn on the power. He bought a new AC adapter and tried the battery in and out and still not solve.
Should there be a light at the front of the laptop when it is plugged in and turned off?
Is it hard by exchanging the DC IN 19V on the phone jack?
Thanks :)
Is this a Toshiba adapter? If the tension or the polarity is wrong, it can damage the motherboard.
DC IN (power cable icon) light should illuminate when the AC adapter is plugged in, if the adapter does not work. You can use a multimeter to check the volts and amps of the adapter.
If not, then a new Mainboard.
-
Satellite P205: Touchpad does not work when the new adapter is connected
I got a replacement charger for my Satellite P205 but put it has A 4.19 instead of 3. 95 has, they said that it didn't matter, but since I use the charger, I have the following problems:
-Does not load properly and turns off after an hour.
-The touchpad has a mind of its own when the charger is connected (windows opens if hovering over button, through the screan jumps when I try to move it, freezes and disappears)
-Charger Word to say the laptop plugged in but not chargingWhat can I do to remedy these problems, the laptop works perfectly when the charger is not plugged in?
See you soon!
Hello
I guess that the touchpad worked correctly in the past with the former sector adapter.
Is this good?Well, it seems that these questions are related to the new power adapter and I would recommend using a 100% compatible adapter.
Check the AC adapter s old part number and if the issues could be resolved using this adapter.
-
Satellite M50 does not supply power to the top
Hello
My laptop Satellite M50 does not supply power to the top. The laptop itself is working fine, but I can't use it as the battery is discharged. I checked the cable ca and it seems ok. The laptop has a fuse internal which I need to check? If this is not the case, what should I do?
Thank you.
Hello
If I understand you correctly you cannot use laptop with AC power only. Am I right about that?
Switching between the block of AC power or the battery, do the power of electronic cards and there is not a switch so that you can check.When you connect your laptop to the power Jack is the power LED ON?
-
Vertical lines and darker screen on Satellite P30-109
Hello
I have a Satellite P30-109 running on Windows XP... But my screen is slowly becoming bad. It's getting vertical lines from the top of the screen down. In addition, the colors are much darker than before.
But when I plug in an external display, there is no problem. So I do not think that the video card problem? He spent the period of warranty.
TNX
Haris
You are right; If the same question doesn't appear on the external monitor then it s certainly not a GPU problem!
I think it might be a problem with the LCD itself or with the small role as a FL inverter.
I think you should communicate with ASP in your county for a check.Maybe if you're a lucky man, only the small part malfunctions and the replacement wouldn t be expensive.
Good luck
-
Vertical dotted lines and bad shading on Satellite P30-109
Hello
Sorry for my bad English,
I have a problem TFT on my Satellite P30-109.
Regular vertical dotted lines and bad shading.
I formatted the disk with the recovery disk, but nothing has changed.An irregular viewing is present during windows startup.
What can be?
Have you any suggestions? I have to throw my PC?Thanks for your help.
StefanoChain is quite right. If the same thing happens on an external device there is problem with the video card and probably the whole motherboard must be exchanged.
Sorry, but you must contact partner authorized in your country. If you need address, you can find them under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
Good luck!
-
Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.
As you have a laptop, better make this laptop in the computer Forum post here:
http://en.community.Dell.com/support-forums/laptop/default.aspx
Tip: when you post a message, preferable to always include the computer model.
Bev.
-
Satellite C660 - WIFI connection lost after disconnecting the AC adapter / CC
I have a Toshiba Satellite C660/C660D.
I always connect to the Internet via the wireless connection. However, the laptop must be connected to the power supply. As soon as I unplug the connection drops.
Any help / advice would be much appeciated.
Hey Buddy,
Please read this article. Normally it should help you:
[Wireless LAN connection disconnects when the AC adapter is removed. | http://APS2.Toshiba-tro.de/KB0/TSB12033H0001R01.htm] -
HP ENVY x 360-15-w100nt: wi - fi connection slows down when the charger is not plugged
Hello
My wi - fi connection slows down when the charger is not plugged in. Correct the wireless lan drivers. So far, I appreciate all kinds of advice for this problem.
Thanks in advance
Hello @JohannNewma,
Welcome to the HP support community! I read your post and wanted to tender hand can help you!
I understand that you notice a decrease in speed wireless on the x 360-15-w100nt laptop computer ENVY when running off the battery voltage.
You can check and adjust the power options on the system as it is probably trying to save battery power by reducing wireless performance.
If you're still having problems, you can follow the steps described in this document to troubleshoot the network settings and internet wireless.
Please get back to me how that happens. To show that you like, or are grateful for my post, please click the Thumbs up below.
Thank you!
-
Try to detect when the USB cable is plugged
I used the USBPortListener to try to get an indication when the USB cable is plugged into the phone, and also when it is cut. The problem is that a single function never gets pulled, and that is 'getChannel', whenever I have data on the connection.
Obviously, I must have been a misunderstanding on how to use this listener, but I woud take "wired" lights whenever the cable is plugged in, even with "disconnected".
I think you want to use a system for this listener
Maybe you are looking for
-
HP Envy 700-414: lack of network protocol
Problem of local network access.HelloI have a problem to an ASUS 10 Windows computer on a local network with Windows Explorer. I get the error"One or more network protocols are missing on this computer."This computer means one which makes access to o
-
How can I change the name of the .png file saved when I create a HTML report?
I have a report generation .vi that reads in several graphics and adds the 'photo' in the .html report. Is it possible to control how LabVIEW named the graphics .png resulting? I' worm attached a photo of the small piece of code and the generated aut
-
How can I fix the error 35603 Runtime
How can I fix the error 35603 Runtime
-
In the cell free game the game number is not displayed in windows 7.
Hello When I open a game of free cells I observed that the game number is not displayed on the top bar.This number was posted in all earlier versions of windows.I have a screenshot of the same thing, but I couldn't find a link to download. Thank youJ
-
Hello My printer HP Photosmart B210 more often than otherwise, print documents of the half, then stops mid page and eject half print. For images, word documents, PDF, and 4 x 6 photos, as well as wireless printing, or plugged directly on the USB prin