Satellite P30-145 will not stay

Similar Questions

• Satellite P30 - battery will not work correctly

  Hi all

  I have a Satellite P30 for more than a year now and overall I am very satisfied with this mobile 'desktop '.
  The worrying thing is that I keep the laptop high time constant to allow room for the fans. (If they get hot the laptop just turns off).

  My question is about my battery about 3 months ago, the problem began, suddenly at random time my laptop can not regocnize battery which mean that even if the cable ca is in hes runnin on battery and goes so goes out after a while. I always leave the battery in the laptop when I use it because the cable ca is not quite stable more unfortunately so I need to keep a book on the cable in order to make it work.
  Is it possible that I can claim a new battery or do something about the problem? It is very difficult when I'm workin and all of a sudden the light just goes and I know that I have a max of 30 min before he died.
  Please let me know what I can do, thank you

  Alexander Wiegand

  Hi Alexander,.

  I don't think that the problem is with your battery, it is more likely to be a bad contact on the ca cable where it plugs into your laptop. In general, the ca card makes an intermittent contact and that the power of fools management system into believing that AC power has been disconnected. It follows that the power, then transfers to battery power and it ejects then until the powers of the unit off.

  I managed to solve this problem on my SA30 anchoring the power cable at the back of the laptop so that there is no constraint on the card.

  With regard to the problem of overheating, computers laptop modern can generate a lot of heat and requires a lot of cooling air to keep things cool. Make sure that the cooling system is cleaned of dust and debris with a vacuum cleaner pipe placed on the intakes on a regular basis.

  Kind regards

• Satellite P30-145: is not an audio device in 'sounds and Audio devices '.

  Hi guys,.

  I've just corrected a problem with the help of a member of fantastic, but now I have another!
  My speakers suddenly decide to not work! I checked the volume etc. and alll was fine, but when I went to control panel > sounds and audio devices, it says I have no audio device!

  It worked fine this morning and I have nothing done havn't who could have done this.
  These problems I encounter are just spontaneous, I don't know what is happening!

  Anyone know how I can fix it and if nobody suspects the virus activity? (I did a scan that says that I don't have)

  I use a P30 145
  Thank you very much

  Hello

  Have you checked the Device Manager? The sound card appears correctly in the Device Manager or yellow exclamation marks appear?

  Have you tried reinstalling the audio driver? If this isn't the case, please try it.
  Of course, I recommend also updating the anti antivirus applications and scan the system for viruses and malware

• Satellite P30 Pro: Will not properly sleep mode

  Hello

  I do not normally use the standby feature, but it hibernates.
  Recently, I started using it, so I keep the supply charge of the power supply of the wireless mouse.
  Unfortunately, he's not exactly going in standby mode it used to - I close the lid and I can hear the fan turns off after a few seconds (about 20) standby red LED flashes and then they come back after 5/10 seconds and stays on.

  The standby light goes green on and in practice, it is, switches the screen off the power and the ADSL connection - that's all.
  I did close the cover of the last night and found this morning with 3 green LEDs on the fans running!

  Any help?
  Please note that the settings are correct - I just checked and it is set to go into sleep mode by closing the lid.

  Thank you
  Mobo

  PS: Lately, I have day a few drivers from the Web from Toshiba site (can't remember which)

  Hello

  If I understand you right, the laptop is on standby and it s is always connected to the local network.

  Well, maybe there is a wake-up on LAN enabled mode who wakes the machine automatically to standby mode.

  Try to access the BIOS and LAN / WLan, settings on the card and if necessary to disable this option.

• Satellite P30-145: White Rectangle on screen

  I have a Toshiba Satellite P30-145, and he has recently developed a problem with the display. Whenever the computer is turned on, there is a large white rectangle covering part of the screen from top to bottom.

  Stopping and restarting the computer didn't help, display settings settings I tried did not work and a system restore did not work.

  I think it's maybe a problem of overheating the computer often becomes very hot and sometimes stops due to overheating (even if fans don't seem to be blocked when this happens).

  Anyone know what could be the problem and if it can be fixed?

  Hello

  I think that the fault of the graphics card might be the problem
  Maybe the GPU damaged because the temperature inside the laptop.
  As you say the laptop is overheating and it is really possible that it was a reason for that matter.

  In my opinion, you need to connect the laptop to the external monitor to check if the same will appear on the second screen.
  If you're going to see the same rectangle on the screen then the graphics card is damage and the entire motherboard must be replaced

  Feedback would be greatly appreciated

• Satellite P30-145: the drive won't recognise DVD double layer

  I have a Satellite P30-145 with a SupermultiDL DVD player. When I got the PC, I could write DVD double layer with no problems. Now the drive will not recognize DVD double layer at all. Even those from the same box that has worked well before. I use are Verbatim Double layer DVD + R 2.4 x discs.

  After a lot of internet research, I have downloaded and run DVDInfoPro. This application has reported that the Player did not support the DVD + RW DL. Very strange!

  Can anyone help? The drive is a carpet * a DVD-RAM UJ - 831S.

  Hi Lan

  This disc is certainly DL one, but I can imagine that the drive is defective and cannot calibrate lens in the right position. This model of laptop is more than two years, and if you have used this drive extensively, I can really imagine that the DL function is defective.

  What you can do is to clean the lens and see that it will help.

• Satellite P30-145 has no backlight?

  I have a satellite P30-145, which I have owned for 1 year and 2 months. Yesterday, I went to turn it on to find the image on the screen was very very low, to the point where it is very difficult to do anything. I know that there not the works of fine external output, as I connected it to the TV, so I can only assume the LCD backlight bulb.

  Is there anything I can do to remedy this? I'm angry that it happened just outside the warranty period and I was wondering if there is anything I can do about it. I'm pretty comfortable with the dismantling of the stuff so the ideas/pointers would be welcome!

  Hello

  It looks like FL-inverter to malfunction. This part is not very expensive.
  You suggested that the laptop is about 1 year. As I know the guarantee must be valid longer since only during one year.
  I would recommend contact the Toshiba service partner in your country and explaining your situation guys.
  I think that the service guy will solve the problem of the inverter without major problems.

  Good bye

• Satellite P30 145 cannot see Mat * a DVD RAM UJ831S - error code 41

  My Satellite P30-145 has simply ceased to see my CD/DVD drive.

  Yellow exclamation mark in Device Manager and a code 41. IE has the driver but can not see the material!

  A loaded cd spins and the light flashes indicating it is read, but it's her.

  Any ideas or suggestions?

  Hello

  The drive is displayed in Windows Explorer?

• Question about upgrading BIOS for Satellite P30 145

  Hi all, first post!

  I have just received notification that there is an update of the BIOS for my laptop, Satellite P30-145, I downloaded and tried to install it but I get this message "the size of the rom file is incorrect" ideas?

  Hello

  Seems Toshiba has released and document technical support for this newsletter.
  I found this useful statement from Toshiba:

  I can't update my BIOS with the function BIOS Phoenix-file ZIP Windows XP Windows.
  I always get an error message: the size of the ROM file is incorrect.

  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  I hope it helps.

  But note; The update of the BIOS is always risky! If you have any problems with your laptop you n don't need to update the BIOS.
  The bad BIOS or bad BIOS update procedure may damage the cell Board!
  So take my advice and never change a running system ;)

  Greetings

• Satellite M35x-S161 will not work on battery

  My Toshiba Satellite M35x-S161 will not work on battery power.

  With external power supply, the battery status icon see the stack of 90 to 99%, but if the external connection is deleted the computer will immediately dead.

  By pressing the power button with the power supply disconnected, nothing happens. There is no light.

  I suspect the battery is dead, but why it doesn't show 90-99% full?

  Hello

  In my opinion, your battery is dead.
  My old battery was always full, but I could use the laptop to only for 1 min.
  While the battery was empty

  There is nothing unusual issues you may encounter in using mobile phones
  The battery can die one day.

  In my opinion, the battery needs to be replaced

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Satellite 2410-303 will not read the product recovery CD

  My satellite 2410-303 will not read my product recovery CD.
  When I turned off my pc with the drive in, I get messages saying that the disk is not formatted correctly.

  Hello

  It of weird, is your CD the other disc drive? Have you tried to read your cd of restoration with another computer? If the same error occurs on another computer system, then the cd is probably defective.

  Just a question: I guess you want to recover your machine, Don t you?

  See you soon

• Satellite A 200 will not be stopped correctly

  My Satellite A 200 will not be closed down whemn I close the system. Only solution I can use is now 'hard' shut down, using power button, but this isn't the right way.

  Is this a known poblem? Can you give us some solution?
  Jeroen pool

  Maybe a process that runs in the context of the operating system can't shut down properly and therefore the Windows operating system cannot stop.
  I've seen questions on different computers.

  I think you should try to clean the registry with the 3rd tools i.e. CCLeaner. It s for free and can be downloaded from various sites.

  If it does not help check if the new OS install helps solve this problem.

• Windows Vista SP2 fails to install and Windows Firewall will not stay

  Hello, I have problems with Vista 64-bit, it will not install service pack 2 and Windows Firewall will not stay. I tried to manually enable ICF manually and it won't turn. It gave me error 6x9D. I ran several antivirus scans malware byte and pc cleaner pro 2012 and the issue has not been resolved. If I could get help would be much appreciated. Thank you

  Hello

  What do you use for security?

  If you are using an Internet Security Suite, it will have its own firewall and disables the default Windows Firewall.

  And you should have only one firewall to avoid problems related to the operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You have not installed SP1?

  If so, try a direct download of SP2.

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• FreeCell card will not stay up

  When I play freecell, that my card will not stay up in the third blockit falls in can help you

  Hello

  -What version of Windows is installed on your computer?

  If you use Windows 7, follow the steps mentioned below and get back to us with the results.

  Uninstall and reinstall the game.

  a. Click Start, in the start search box type "appwiz.cpl" and press ENTER.

  b. click on turn Windows features on or off.

  c. clear the check mark before the games.

  d. click OK.

  e. restart the computer.

  f. re - turn on the device by placing a check mark before the games.

  g. restart the computer and check if the games to launch successfully.

  Reference:

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I hope that helps!