Satellite P300 - 1 H 9 does not start after the update of the BIOS didn't

I perform an update BIOS, but before the update was completed second shortly after), the laptop has been frozen and is not used to shutdown evenn if hold start buton. So I disconnected the battery and plugin power after that I have reconnceted the plugin from power, then press the power button, it showed a black screen and i heard a
beep (1 long, 2short)
CLR CMOS can solve the problem?

Where the rider is to do the reset?

P300 - 1 H 9

Thank you very much...

Hi mate

Seems that something was wrong during the BIOS update process.
Usually the BIOS update should work correctly but the BIOS update is always sensitive technique and something like that can happen.

Usually the CMOS must be cleared first and then the ROM module must be flashed again. This can be done by an ASP.

Be in contact with an ASP in local guys help!

Tags: Toshiba

Similar Questions

  • HP DV7-7259nr does not start after the BIOS update

    Hello

    I have a problem with my HP DV7-7259nr laptop, WIN8 running: it does not start after tune recommended to update BIOS and drivers.

    It downloaded all the drivers and started installing at one time, he asked for a reboot, click OK and the BIOS update has begun to load. The process ended successfully and after the reboot that my laptop wouldn't start; everything is black and the cooler is runing.

    I tried:

    -battery disconnected and power - button Power - plugged power again-> NOTHING

    -Windows key + B + Power button--> nothing

    Please help as this is the laptop I use daily in my work.

    Thank you

    If you install the electro mechanical original hard drive in it starts?

    If it has been delivered with a SSD?

    The specifications indicate that an electromechanical drive was part of the specification.

    This is where lies the UEFI environment. It is actually on the hard drive.

  • A series of satellite does not start after the BIOS update

    After update bios with the downloaded utility my laptop does not start.
    Do you have this case covered by the warranty?

    I'm not sure if this would be covered by the warranty. You must contact the ASP in your country for details, but I assume that it s not covered.

    PS: Did you try this work around:
    -remove the battery, disconnect the adapter
    -wait ~ 40 min
    -connect the two devices again and try to turn on the laptop

  • NB200 does not start after the bios - screen black screen with blinking cursor

    Hello

    I was using the laptop as usual when I think there may have been a virus activity - reason I say that is that my anti-virus closed unexpectedly. I couldn't restart programs files.

    I restarted the laptop.

    After the bios menu will I get a blank screen with a blinking cursor - windows does not start.

    I did the following:
    (1) create a USB bootable with Recovery Console window XP - boot with this i can see three drives C:, D: as SDA? I can see the content of these disks, so it seems that my HD works. I ran a fixmbr and fixboot, but this has not solved the problem.
    (2) create a Kaspersky bootable USB virus scan - ran it without problem - he found a few question (not on the disk boot sector) I've fixed.

    An option was to copy files from the laptop and then start it in recovery mode - so Itried to run the phone into recovery mode hold down the 0 key at startup - the bottom of the screen then displays * HDD Recovery mode * and nothing happens.

    Any help - other options would be greatly appreciated.

    My 1 year of that guarantee has expired a few months back so can't send in for repair.

    Thank you

    Hello

    I doubt that it is a virus.
    Seems the file system is damaged on the HARD drive and this is the reason why the laptop does not start until it could also be a partition of HARD disk malfunction.

    Try this; Turn on the unit, press F8, and then check if you have the laptop repair.
    If this is not possible, then you will need to reinstall new OS.

    Here you can order a recovery disc:
    http://backupmedia.Toshiba.EU/landing.aspx
    Of course you will need an external USB CD/DVD drive

  • Tecra 8000 does not start after the BIOS update

    From one day to the other does not start my Tecra 8000 (400 MHz/256 MB BIOS 9.30 for years). After start-up, the disc starts to turn, but the screen including the backlight remains completely black, without red logo TOSHIBA BIOS is not accessible.

    I got a new mainboard on stock, so I replaced it, and it worked. Unfortunately now my WLAN card now did not work properly. I tried several settings of the BIOS with no results, so I decided to do an update of the BIOS from 7.50 to 9: 30. After the upgrade, I get the message "ROM WRITE successful, utility completed. LEADER BIOS: Tecra8000 v 9,30 ". Because what either kept silent, I pressed the power button to restart and heard a long and many short beeps (endless). I could interrupt what pressing the powerbutton for 5s.

    After turning on again I have the same problem as described in the first line :-( I can't get into the BIOS, but I can again update (with pressed F12). Once again these beeps.

    What to do with these beeps after average BIOS update? I replaced the MoBo connector LED with pension. Processor, memory, keyboard and HD has remained the same. So, before I start disassembling the machine, please notify, your help is very appreciated.

    Hello Joachim

    I'm not a technician and don t know what the beeps but I am afraid that the BIOS chip is damaged. Because of this, the unit is completely dead. Sorry, but I really don t believe you can do anything. Maybe the new motherboard again :(

  • HP compaq 6510 b does not start after the BIOS update

    Hello

    When I turn on my laptop HP compaq 6510 b it DISPLAYS this message: your bios has not finished updating 6510b.after flashing the bios of the laptop does not start .it displays the same message (your bios did not complete the 6510 b update) and turns off. I cannot access the bios by pressing F10.the bios version was F16 and flash by F20 .will help thank you very much.

    I'll have to return a verdict of laptop motherboard bricked due to a failure of the BIOS upgrade. Sorry, but it happens.

    This means that this would require the replacement of the BIOS chip to make it work again.

  • Vista 64 does not start after the bios screen. Can not boot from the recovery cd or help

    Last night a MS pushed a windows update and my pc restarted automatically.  But it does not actually restart.

    The PC goes through the bios tests, passes and then crashes and does not start in Vista.

    I can't start at all, including safe mode.

    I can't the system recovery option in HP bios to load.  Can I only use my Vista64 system recovery bootable cd or actually start.

    First of all, I thought it was a HARD drive problem, but tests of the bios disk hard that all spend, even the 2 hours 'SMART' test that he was running.

    Help

    Hello

    What happens when you try to boot from the recovery CD? You receive messages or error codes?

    You can check if the boot in the BIOS settings priority is configured to boot to CD\DVD.

    NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    For more information, you can consult the following article:

    BIOS: Frequently asked questions

    If you still experience the problem, you may need to contact HP for assistance.

    HP support

    Hope this information is useful.

  • Satellite P300 - Value Added package does not work after the computer restarts

    Hello

    I have a Toshiba Satellite P300 PSPCCA Windows vista ultimate x 64. I can't do my work button soft touch. I downloaded latetest VAT package and installed. After installation it asks to restart but I restart my laptop and I make just restart Flash Card and my button works all good touch app that is silent, Media Player, etc., but once I restart my laptop it stops working.

    I tried the uninstaller and reinstalling but no luck. I read in the forum toshiba on running CCleaner and do a fresh install but still have the same problem.

    Does anyone of you knows how to solve this problem.

    BTW, I got the software AVG internet security on my system, but have added folder toshiba for exclude of realtime scanning just in case if its causing problems but not luck. I searched qurantine folder and its nothing in there.

    Please help me get my work button soft touch.

    Thank you.
    Kind regards
    Jay

    Post edited by: Jay Padia

    Hello Jay

    I agree with Akuma. All you can do is remove VAP preinstalled system and reinstall the latest version. Why you didn t follow the instructions to restart the computer after the installation of VAP?

    I installed VAP several times on my Satellite P200 and Satellite A300 without any problem, but after installing the latest version, I rebooted phone immediately. The procedure of the facilities has been completed and necessary processes started in the background. I guess that's the problem on your Satellite P300.

    If nothing is done the last step is to install the OS by using the DVD facilities. After doing this you will own preinstalled OS and everything works well again.

  • Satellite L50-A-160 does not start after the Bios Update

    Hi, first of all, this is first post.

    I have 2 satellite L50-A-160 with bios 1.1

    Problem: seems to go to sleep after a few minutes, even working on them (even with both)

    So, I found an updated version 1.9, downloaded and running on one of the laptops. the biosupdate tool found matching the BIOS and a race.
    In the middle of flashing, he fell asleep. turned on and not start. What can I do? Recovery options? I guess the same thing will happen with the other too...

    What is the problem with these computers?

    Besides; very poor battery, always shows 0% available and not charging...
    Does anyone have a solution?

    Best regards
    -always in the hope.
    GT

    Have you tried to change in Power Options?

    See screenshot and try to change the ones I marked (it can refresh the settings, just change the values) and see if this solves the problem.

    and for the other laptop with no boot, a laptop sleep by updating the bios will surely mess it.

    what I don't understand is why your sleep laptop BIOS update, as far as I know the sleep settings is active then on windows (since this is controlled by windows)
    He does not sleep while in the BIOS you leave 1 year, sleep settings active only after loading windows.

    have you tried to check the time of processor for your laptop? Maybe its overheating causing auto-off

  • Satellite A100 - BIOS and Windows does not start after the BIOS update

    Hello, I extend my Satellite A100 laptop BIOS.

    After update, I can't start my laptop and the BIOS will not start.

    You see the Toshiba logo?

    Was there a power failure when you updated the BIOS?

    Try to remove the battery and the adapter and leave for a few hours. You can also try reinstalling the RAM.

    If this does not help, you will need to send it to a Service Center for repair.

  • Satellite L350 - does not start after the BIOS update

    Hello

    I recently (yesterday) downloaded the latest version of bios update dated dated 25/02/10 2: 20 - WIN, after download and does run the software from the laptop immediately stopped working and stop. I am now no longer able to boot up the laptop at all, all I get is the power light on and the hard disk light flashes, I hear the spinning CD/DVD drive, but what is not screen anything, I don't think this is the start.

    Is there a way to fix this without taking it to a store/engineer, BIOS recovery?

    The laptop is a Satellite L350, I opened the laptop to try to reset the CMOS by removing the card mother battery (not sure if it would have helped), but as much as I know it doesn't have an or I'm not.

    Any help would be greatly appreciated.

    Thank you

    Andy

    Hi Andy,.

    Hmm... If the BIOS update failed, you can't do anything because only an authorized service provider has professional diagnostic and recovery tools to redo an update.

    So in my opinion, you must contact a service provider authorized in your country. Get in touch with the guy and ask for help. They will tell you what to do now.

    Here is their list:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

    Good luck! :)

  • Satellite L30 does not start after the BIOS update

    Hello

    I upgraded my BIOS Satellite L30 and now the laptop will not boot. When I turn on the fan starts and that's it. I think I have updated the book with the bad BIOS... The laptop is only 1 day old... Is it possible to reset the machine to the default BIOS.

    Help, please...

    Hi Scott,.

    Unfortunately there is no easy way for you to go to your BIOS to its previous level. You need to entrust your laptop to a Service approved partner who has the necessary equipment to Flash the BIOS to the previous level.

    Kind regards

  • Re: Satellite A200-1AX does not start after the BIOS update

    Hi all!

    I wanted to install XP on a Satellite A200-1AX.
    So I tried to update the Bios to the version that supports supported XP.

    When I tried to install it, crashed Vista and now the laptop won't even turn on.

    When I keep the power button pressed, the whistling fan but nothing happens.
    I think the BIOS is gone or corrupted.

    What should I do?
    Thanks in advance for any help!

    > When I keep the power button pressed, the whistling fan but nothing happens. I think the BIOS is gone or corrupted. What should I do?

    What to say to boyfriend. It seems that something was wrong during the process of updating the BIOS maybe the BIOS was not written correctly and the ROM module must be flashed again with the help of a special procedure and the tool.

    In this case, you can do anything you will need to contact the ASP in your country for a fix!

    Don t waste time and ask a technician for assistance.

    Good luck and best regards

  • Satellite C660D-104 does not start after the BIOS update

    Hello

    I installed the latest version of the bios on my computer Satellite C660D-104, but it has not restarted.

    Where is the place to do a reset?

    Under the ram I have any triple x or B499

    I can not find, can you help me please?

    Thank you

    BIOS update has not this means that the ROM module (where the BIOS is stored) isn t flashed properly.
    As far as I know that this problem could be solved by flashing module ROM using Toshiba BIOS disk of the crisis.
    I guess Toshiba authorized service provider to have this disc of crisis and able to reflash the ROM

  • Satellite A100 does not start after the BIOS update

    Hello

    I downloaded the update to the bios toshiba A100 PSAA8 on the toshiba site and applied using the procedure of updating the bios from windows XP MSE. Restart after the start of the update stopped at the toshiba start screen.

    At startup the screen by pressing ESC watch text mode. The message indicated it confirms the update of the bios version. POST messages are:

    _________________________
    Genuine Intel CPU
    No TPM or TPM has problem
    1015 M system RAM passed

    Press to enter in SETUP
    _________________________

    Pressing F2 just clears the last message in line and then no change is found.

    The laptop comes with windows XP media center edition. I don't know why the TPM secure is enabled. It is possible that toshiba is available with the module of TPM enabled in bios updates that logbook. If this is the case, they must clearly identified as 'not applicable' upgrade for machines that are not relevant.

    I found similar messages around the forum without convincing answer.

    Is it possible to fix this without sending? Even if it turns out to be affordable, it make much sense to pay for the problems caused by toshiba.

    Hello

    Please don t blame someone for you mistakes ;)
    As far as I know that only a few sets of laptops come with TPM.
    If you want to do an update of the BIOS on the models at TPM, you will need to contact the ASP!

    Looks like you used a bad BIOS or bad BIOS update procedure.

    The Toshiba page a BISO update the documentation that describes how to upgrade the BIOS on each series laptop!
    You will find on the page of the Toshiba driver compatible BIOS and information over a large number of details!

    > Is it possible to fix this without sending
    Don t think so, and therefore, you will need to contact the Asp help!

    Good luck

Maybe you are looking for

  • Merger of Split drive

    Hi, one of my clients wanted an SSD in its iMac 27 "and carries the iMac to Apple repair center. They swapped the drive plate rotation with the SSD, and when he came to collect his iMac they told him that they also installed a new OS x disk. He thoug

  • HP pavilion p7-1235 Desktop

    I put a market and the password on my computer by accident.  Now whenever I turn it asks to turn the password and when I type in there, it shows a black screen with the plug with the revisions of the bios written with "Press esc for boot menu".  I tr

  • Turnaround exit status after every 3 cycles of while loop

    Hello I'm trying to return the exit status after every 3 cycles of while loop.  At this point, the code would look like this: If i_quotient_of_while_loop_iterator == 0 then output_1 = not output_1 It seems that there is no way to do so, how can I ach

  • You can grab a copy of the Original Microsoft operating system?

    HI: My Dell Dimension 3000 had Windows XP Home on my hard drive and it destroys itself.  I bought a new hard drive and he would reinstall from the restore disc.  Unfortunately as it was for many years the restoration dischas moved.  I still have the

  • PDF Preview Handler for Vista

    In my email to Office 2007, all of a sudden I can't open attachments - error with PDF Preview Handler for Vista.  I downloaded Adobe Reader 9.1.  It worked fine last week.