Satellite P300-1 has 8 - password requests when you turn

Similar Questions

• Satellite P300-1GL battery falls to 85% when you unplug the charger

  Hello

  I had a Satellite P300-1GL for about a week and I let it charge and discharge several times. When Vista tells me that the battery is fully charged (100%) and the battery light changes from orange to white on the laptop, I unplug the charger. Then, my battery level falls almost immediately from 100% to 85%. If I plug the charger in the laptop, he noted again the battery 100%.

  Can someone help me out here?

  Thank you very much.

  Select this option.

  Hello

  As mhoffmann suggested discharge the battery fully until the laptop shuts itself. Then reconnect the AC/DC adapter and charge the battery fully. If you now disconnect the AC/DC adapter is again - reductions of up to 85% battery level?

  If so, I think that the battery must be exchanged. Contact the registered maintainer the closest that you can find on the Toshiba site and ask for a new battery. Technicians will try to help you:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite A100 has sometimes unresponsive when you turn it on

  I have a computer laptop Satellite A100, Centrino Duo. Sometimes I have problem when you turn on the laptop. The computer stops responding while it is turned on and when I reboot without disk scan is started which is usual when windows does not start successfully.

  Sometimes the computer starts and I log in the system but then the screen turns white and even when no disk scan is started when I restart the system.

  Pls advise.

  Hello

  In my office, I have the Satellite A100-504 and so far, everything is OK. I didn t notice something similar to described issue. Have you noticed this problem since the first day?

  Can you please tell me what A100 you have exactly? Is - this WXP or Vista preinstalled laptop?

• Satellite A300 starts sometimes like when you turn it on

  Hey people,

  So my sisters laptop (satellite A300) was more than heating for basically since we bought it, but now I think that has caused a serious problem.
  Now it does not start at times like when you turn the backlight only market not even turn on.

  Hard drive does nothing basically nothing just the power light comes on it is all.
  But when I remove the charger and close the lid and open it again, wait like 2 minutes it magicly towers, so it's the startup problem.

  This may have something to do with it, but when you plug the cable that the tactile area (above the keyboard) lights up if laptops or disable but don't market not turn on if not plugged Chargers... also touch dosen't work area.

  So many things hope you understand all this, thank you!

  Hello

  I think that this is related to the problem of equipment; Maybe this problem of motherboard or power suply electronics problem.
  But that's just a guess and no one here will be able to say what's going wrong with your laptop until it has been checked by a technician.

  That's why I put t think you could solve this problem, install the new OS or new BIOS.
  I therefore recommend to request a laptop technician help and equipment to check.

• Firefox an abortion any AJAX request when you press ESC

  Why firefox an abortion any AJAX request when you press the ESC key?

  I don't see any value in a feature like that. As a matter of fact, no other browser to do this.

  This has happened

  Each time Firefox opened

  Hello Fabio.

  First of all, and although that perhaps not related to your problem, I would remind you that the version of Firefox you use right now since been abandoned and are no longer supported. In addition, it has known bugs and security problems. I invite you to upgrade to the latest version of Firefox, for maximum stability, performance, security and ease of use. You can get it for free, as always, to www.getfirefox.com.

  As for your question, if you are absolutely sure that this problem is not an add-on you have installed and has not been changed in the latest versions, you should file a bug at bugzilla.mozilla.org to request this behavior to change.

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Windows media player error "Windows Media Player has encountered a problem when you try to read the file" after burning CDs.

  Original title: "missing songs" in my windows media player then burn them on several cd :((

  I burned songs to several cd using my Windows media player to make different Cd, but after I returned to my library all the songs that I burned to the CD have disappeared, they are there, but they won't play it is as if they have been deleted, a window appears saying that windows media player has encountered a problem when you try to play the file. I did not notice this until after Cd burning a few I can't do more because if I keep going I'm not going to have more songs in my library! I don't know what to do im going crazy, it took me a long time to get all of these songs and now he disappeared! I have Windows 7 Ultimate is the version 12.0.7601.17514 hope that helps

  Hello
   
   
  They were playing before you burn CDs?
   
   
  Method 1:
  
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  Open the troubleshooter in the Windows Media Player library:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  
  Method 2:
  
  This problem may be due to database corruption. You can delete the Windows Media Player database and check if the problem persists.

  Steps to clear the database of windows media player:

  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

• Family using in Windows Vista Premium 32 bit, I have error "host of transformation for Windows has stopped working" when you turn on the PC.

  Original title: Windows Vista 32-bit Edition home

  Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.

  HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.

  Nobody knows what's happening with pc or how that I should do to fix this problem.  Any help or advice will be

  appreciated.

  Thank you

  EJ

  Hello

  1. you remember to make changes to the computer before this problem?

  Method 1:

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Put your computer in a clean boot state and then check if the problem persists

  Follow step 1 in the link.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3:

  The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.

• I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm

  Info on the link above will help you.

  http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html

  More info on including a password reset disc info.

  See you soon. Mick Murphy - Microsoft partner

• "The server has encountered an error" when you want to send a message with the form.

  Hello

  "The server has encountered an error" when you want to send a message with the form.

  With the businesscatalyst site, the message is well received by the recipient as the site FTP host, the previous message is displayed.

  What code do I add and where?

  In advance, thank you.

  Please, answer in french!

  Hello ScratchMaster,

  Please see the link below, I'm sure that you will find it useful.

  https://forums.Adobe.com/docs/doc-3581

  Kind regards

  Vivek

• Satellite Pro L500 stuck when you turn it on and got the loud noise

  I use Toshiba for a long time, this is my 3rd Toshiba laptop (I bought it in June 2010), today I bought the helmet, when I plugged it in, it did not work. (When I talk with my friend through sky, I use the laptop speaker instead) Then my friend got me to download a driver for the sound.

  After the download, the helmet worked perfectly. BUT the speaker on the laptop did not work. Then I restarted computer again and this time when you turn on, it's stuck. stop boot on Toshiba logo later process, there are peep sound (not speaker, he is very strong), I can hear it from the inside. I can't do anything else, JUST close.

  Please help or advise where can I take my laptop to the service because I think that if people reply to my post and I don't know if I can fix it myself.

  I'm going overseas week next to the presentation and need to use the laptop. Do you think that if I take the laptop to the center of toshiba, they immediately understand problems? I am now using my old toshiba, and it is slow to make any presentation.

  Hey Buddy,

  You use normal headphones with headphone jack or USB?
  Headsets with headphones are usually easier handling in my opinion.

  In any case, at the time where your computer laptop doesn't boot and stuck on Toshiba logo, right?
  In this case, you must remove the battery and the AC adapter at a time and test it again.

  Check this box!

• Stor.e TV + loader error keeps coming up when you turn it on

  I experienced ongoing problems accessing the hard drive. Error message "No Loader" keeps coming up when you turn it on.

  The so-called 'solution' to this problem on this forum is to open the box and play with the cables. While I had some success with this method initially, disassembly of the box 10 times a week is not on.

  In desperation, I tried something else.
  When the message no. Loader is in place, I pass in the box and the new on the remote control.
  After 2 or 3 times, and then the folder of the HARD disk appears generally.

  I did that constantly now with great success. However, this suggests that the error no. Loader is NOT a mechanical connector with the hard drive problem, but (as usual) poor software (what else?).

  Dismantling of the unit is shut down for an extended period of time so may explain why this technique works.

  Put the unit on and off the power several times also solves the problem of file D are not on the network even if Win7 shows shop-TV-Plus as a mapped drive on NTFS (but can not find the file D).

  See the resemblance?

  Another thing that exacerbates the problems is poor ventilation of the device. The first thing that happens with this device, it's rubber feet sticky garbage fall.

  While this may seem trivial, the ventilation slots are under the device and will be blocked if he has no feet. I live in a hot country so this appliance gets very hot and behaves even more erratic, unless it is well ventilated.

  Ideally keep well away from other units and preferably sitting it on a small box in itself with the vents in many exposed.

  I always also have problems to read files FLAC, MKV. The unit sometimes lost synch with files FLAC which generally play OK and crashes or causes a large noise or white noise on the speakers (dangerous).

  Some just MKV files play quite although VLC reads. There are many other inconsistencies, but these are more boring.

  Everyone knows these problems or someone at - it other solutions for these problems?

  I don't think we can expect another software upgrade from Toshiba? Your dreams, pal.

  I m not Stor.E + owner and can not say much about the issues mentioned, but the first sounds of mentioned problem (error no. Loader") for me much more like a hardware problem as a software related issue.

  Files mkv seems to be supported.
  The mkv must be encoded in H.264 and MPEG-4 format
  This is what I found on a Web page.

  In addition, there seems to be an update of the firmware

  [3.5 inches StorE TV + ROM Image 2.12_UI1.0 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 271 & selSeries = 254 & selProduct = 6350 salt ShortMod = null & language = 13 & selOS = all & selType = all & ye arupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 80742 & DISO =-1 & driverLanguage = 42]

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

• start-up problems: when you turn on the computer, it goes through all the trunk starts to load windows xp then starts again again and again

  When you turn on the computer, it goes through all the departures start loading windows xp then again again and again...

  Hi Keryn_Jansen,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3 when was the last time it was working fine?

  Check if you can start the computer in safe mode or from the last good known Configuration.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• How do I reinstall Satellite P300-1 has 2?

  Hello! I really need help with my Satellite P300 - depending on how (with basic English) delete all my files on the computer, and then reinstall Windows Vista. I've read thorugh a lot of topics, assistance to users and others, but can find no solution at all.

  Because I know that some BIOS-based and other stuff, so I would be grateful if someone could explain to me step by step, how to formate (?) my computer everything and then reinstall Vista.

  I'm sure he was following no CD with the computer when I bought it, 70%, so in other words, I don't have any CD of Vista!

  Thanks - I'll be happy for any kind of answers that you believe can help out me

  Hello

  Just a question: have you already installed another version of Vista or not?

  In addition, I put t understand why you didn t read the user manual
  The point is that you must create a recovery disk Toshiba by yourself using the Toshiba Recovery Disk Creator. This tool is preinstalled on your laptop and so you can create a Setup disk.

  You can boot from that disk to reinstall Vista or other, you can use HARD drive recovery. You can start it if you go into the advanced boot menu and select Repair my computer. Then follow the instructions on the screen and Windows will be automatically reinstalled. With HDD the only function the first recovery partition will be wiped off so you can back up your files on the second partition.
  Here's more information: http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  But I really recommend you read the manual before doing something. It s very interesting! ;)