Satellite P300-150 - cannot use a USB

Similar Questions

• Installation of drive HARD recovery does not start on Satellite P300-150

  I have a 2008 Satellite P300-150 I want to restore factory settings.

  I followed the steps described in the manual of s to do it from the hard disk (F8 at startup), however, when I try, a screen will appear with a warning with the topic box"system recovery options"then below says "cannot start the installed program. Click ok to turn off the computer.

  I don't know m which is better to do it now if someone could suggest another way to do this, I would be very grateful.

  Thank you

  The situation is quite simple to explain. Recovery image installation can be done on two tracks:
  -using the HARD drive recovery or
  -using the create recovery DVDs.

  I put t know if you created this disk after advice from Toshiba, but if you use for the installation of operating system.

  By the way: Satellite P300 works perfectly with Win7 32 bit, so if there is a way to install do. It works much better than original Vista.

  If you have any other questions you are welcome. ;)

• How can I configure the keys easy to work with iTunes on Satellite P300-150?

  I have a Satellite P300-150. The easy (the illuminated keys above the keyboard) keys work fine when iTunes is in the foreground, but I want them to work when I minimized iTunes or switch to another window. I found the "TOSHIBA button Support" utility help within TOSHIBA, but it only allows me to set it up as the "Enlightenment" and "CD/DVD" [drive] (the two left most) easy keys make...

  Any ideas please?

  Thank you.

  I doubt that this is possible
  I m using the WinAmp instead of Windows Media Player and the CD/DVD button works with Winamp. I want to say I can run Winamp by pressing this button, but I can't use the game, break, buttons forward in WinAmp.
  I think that it is not possible also with ITunes I've never tested, but it seems that it s not configurable.

  See you soon

• What can be done to improve the performance of the Satellite P300-150

  Hello

  I have laptop Satellite P300-150.
  It seems powerful enough but struggles with some of the latest games.
  It s not my main but game machine I m aware if he's struggling now, it won t well before he won t be able to run at all.

  And I wouldn't be able to play on the move...

  What can be done to increase the capabilities of the laptop - like tweaks, tools and upgrades?

  Thank you
  Max

  Hello

  You could improve memory to 4 GB of RAM.
  The laptop can be upgraded to 4 GB, but note that the Windows 32 bit OS (Vista & XP) will see only 3.2 GB due to the limitation of the 32 bit OS.
  In this case, you must use the 64 bit OS to get full access to 4 GB.

  Second, you can configure laptops OS. I mean you could start the msconfig and might turn off some background process is not necessary including the performance of laptops of waste.

  Unfortunately, other upgrades are not possible (apart from HARD drive, but will not increase performance)

  See you soon

• Satellite P300-150 - impossible to record all sounds

  Hello, someone has an idea why it is not possible to record all the sounds (for example with the Audacity software)? -Other classes of water-recorder do not work too...

  Demand for Win "SndVol32.exe" shows that as a result of input sources: Mic and Line in French - output, it is shown SW-Synth., wave, CD player and Master Volume. -In the case of P300, Mic is in fact only to the webcam mode. On my old P20-852, here I could record the flow of the web and for expl WMP 10. and sometimes I use it for the soundtrack of the synthesizers installed.

  I have de - and reinstalled the rather (Conexant August 2008 version) and a newer version of SndVol32.exe... I tried with a new installation of XP on a 2nd partition program... same result. What's the reason, because I have a modification nLite XP Pro SP3? -My laptop is a Satellite P300-150 /PSPC4E

  Sorry, I have not analyzed all the discussions for an answer to my probs.

  Sincere friendships of Chris

  Normally it should not be a problem to record sounds with a installed and modified Windows XP with nLite.

  But have you tried to install the laptop with the recovery disk? Try this!
  The recovery disk contains all the drivers and tools to use all functions on the laptop and it should work.

• Satellite P300-150: Boot xp-vista & only 3 GB of memory with the xp

  Hello

  I have a Satellite P300-150 and I have two problems:

  (1) I install XP in my second partition and I can't boot to vista, I can start only for XP

  (2) I have install Windows XP Pro SP2, but Windows only shows 3 GB

  Thank you
  Fotis

  Hello

  > 1) I install XP in my second partition and I can't boot to vista, I can start only for XP
  The problem is known to me I installed the XP too on my laptop and after installing XP, I was not able to start the Vista because XP destroyed the Vista boot Manger!

  If you need now a Microsoft Vista DVD original (not Toshiba DVD recovery) and you should boot from the Vista DVD. This allows to repair the Vista Boot Manager.
  Then, you will be able to boot into the Vista operating system. Then, install the free tool called EasyBCD.
  This tool allows you to change the Vista Boot Manager and add the XP operating system to the Boot Manager.

  (> 2) I install Windows XP Pro SP2, but Windows only shows 3 GB
  I guess that your XP is a 32 bit OS and so he can see only 3.2 GB due to the limitation of the 32 bit OS.
  More details you can find on the Microsoft page

  Good bye

• Satellite P300-150: slow processor during the test with the id tool intel

  Hello

  I just bought a Satellite P300-150 and it was working well in general... play lotro with few problems, but not in dx10 cos it chuggs as hell.

  I noticed he had a genuine problem of warhead of the crisis in the recommended settings, but thought it was just cos he couldn't do.

  But I downloaded the untilty of Intel processor id and he gave the following results... as you can see on the bottom 4 lines the processor is very upset with the expected results for the frequency and buses (fewer than half actually).

  Intel recommends if there is a huge gap, I need to contact the manufacturer... which brought me here.
  Any advice before contacting tech support directly?
  Just maybe I can play warhead after all! : o).

  Utility to identify processors Intel (r)
  Version: 3.9.20080910
  Timestamp: 2008-10-03 22:27:03
  Number of processors in system: 1
  Current processor: #1
  Cores per processor: 2
  Disabled cores per processor: 0
  Processor name: Intel (r) Core (TM) 2 Duo CPU T8300 @ 2.40 GHz
  Type: 0
  Family: 6
  Model: 17
  Step by step: 6
  Review: 60 ° C
  CPUID level: has
  L1 Instruction Cache: 2 x 32 KB
  L1 Data Cache: 2 x 32 KB
  L2 Cache: 3 MB
  Packing: FC-PGA/BGA
  EIST: Yes
  MMX (TM): Yes
  SSE: Yes
  SSE2: Yes
  SSE3: Yes
  SSE4: Yes
  Enhanced Halt State: No.
  Execute Disable Bit: Yes
  Hyper-Threading technology: No.
  Architecture Intel 64: Yes
  Virtualization Intel (r) technology: Yes
  Expected processor frequency: 2.40 GHz
  Frequency of the processor reported: 1.07 GHz
  The expected system Bus frequency: 800 MHz
  The reported system Bus frequency: 357 MHz

  Hello

  Satellite P300-150 was equipped with the Intel Core 2 Penryn T8300 processor.
  This processor supports Enhanced Intel SpeedStep technology.

  Enhanced Intel SpeedStep technology allows the system to dynamically adjust the tension and the processor core frequency. This means that the CPU doesn't always work with maximum performance, but only if it of needed. This helps minimize the heat dissipation and allows to secure the battery energy!

  The CPU seems to be slow check with the Intel ID tool ;)

  For more information on Intel Enhanced Intel SpeedStep Technology check out these articles from Intel:
  http://www.Intel.com/CD/channel/reseller/ASMO-na/Eng/203838.htm

  http://www.Intel.com/support/processors/sb/CS-028855.htm

  Welcome them

• Cannot use any USB device after the upgrade from XP.

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Windows 7 handles USB devices very well.

  Please describe your problem in more detail. Tell us what means "cannot use any usb device and the mouse either. Exactly how do you try? What happens when you try? If you get an error message, please quote verbatim.

• Toshiba Satellite Pro M30 cannot use USB 2.0

  I can't use USB 2.0 on my laptop (OS = Windows 2000).
  Where can I download this driver-USD for this Board (Toshiba laptop motherboard).

  Greetings

  Hello

  Have you seen yellow errors such as exclamation points in Device Manager?
  If not, in this case it of not necessary to install all the drivers.
  Moreover, the operating system automatically recognizes the USB ports.

  But what USB device doesn't work? As far as I know if this external device needs more energy than the 500mA so it is possible that the operating system can not recognize this device.
  In this case you need an external power supply for this part or you try to use the USB hub.

  Good bye

• Can satellite P300-20R - I use the latest drivers from site Web AMD/ATI?

  I got a Satellite P300-20R now I want to update the video card drivers - ATi HD4650.

  Can I use the latest Catalyst for the mobility card that I find on the AMD/ATi website, and what is the procedure?

  Toshiba drivers are tested and adapted for certain graphics cards. Driver Toshiba will not force the graphics card to run the highest level and therefore protect laptop from overheating.

  On my Satellite P300, I use Windows 7 32 bit and driver Toshiba. It runs stabile and I'm happy with it.

  To be honest I don t want to use ATI driver and unfortunately cannot give you an answer to your question.

  Can you please tell us which of operating system you are using and what version of driver you want to install?

• Satellite P300-1AO - cannot enter my user profile - forgot password

  Hello

  I have used haven´t my toshiba Satellite P300-1AO for more than six months, because I have a new laptop.
  Now, I need to retrieve data from the satellite but I can´t coz I forgot my user password.

  And I'm probably too stupid to reset is, because after insertion of a CD the two empty, and after you connect a USB, the computer says CD / USB stick can´t be used to reset the password. What I am doing wrong?

  I need data for this thing, and more I want more I'm nuts...

  Can someone help me please?

  Thanks in advance,
  Timo

  Timo if you get 2.5 AluminumSATA HDD Enclosure connect the HARD drive of your P300 to another PC as external device. On this way, you will be able to have full access to all saved data.

  After that put the HARD drive back and install the original image of recovery or Win7 32 bit. It works perfectly on the P300.

• Re: Satellite P300-150 and HDD upgrade

  Hi, my wife Laptop(P300-150) has developed a tick unit HDD1 - I would like to replace this 250 GB drive with other, larger capacity HARD drive. So my question is twofold

  (1) what is the maximum size of disk HARD of this laptop can tolerate? -500 GB?
  (2) does it matter if I buy a SATA - II - when the original disc in a SATA drive?

  Thanks in advance
  IMM

  Unfortunately there is no document where you can find this info on the maximum capacity of the HARD drive that can be used with the Satellite P300 but I m 100% sure you can use 500 GB on Satellite P300.

  I don't know if your laptop has a SATA II controller but, as far as I know, SATA II is backward compatible and I think you can use it on your laptop, but it runs with SATA that access speed.

  Upgrade disk SATA I HARD and you will be happy with it.

• After the closing down by Satellite P300-150 won't start

  I have a P300-150, he stops a day or use environment. I thought it was just a stop thermal protection to the bottom as I had it on all day watching DVDs / tv online. It wouldn't come right back so I let it cool for a while but he still won't return to the top. He tried battery and battery without result. I don't not even to the extent of the POST/BIOS.

  Anyone know the best course of action or other things to check? The PSU works as my multimeter sees a volt 19 - odd of her healthy.

  See you soon.

  Hello

  What happen exactly when you press the power button / stop?
  It goes of the computer laptop or not, I mean s power led or there is no reaction because all?

• Error creating the collection DVD1 - Satellite P300-150

  Hello

  I am creating a recovery disk using the creator of disc of recovery for my new laptop Toshiba Satellite P300. However, at each time at halfway in the process (for dvd 1 only), it comes up with the following error:

  A power calibration error.

  Error code: 0E09B5-26-00037304

  Khusal.

  Which blank media are you using (DVD - R, DVD + R,...)?
  Have you tried a few to use blank media from different manufacturers?
  Have you installed like Nero burning software?

• Satellite P300-220 - cannot run Recovery Disc Creator

  Hello

  Yesterday I received my new laptop (Satellite P300-220). Today, I'm trying to make a record of recovery and launch "Toshiba Recovery Disc Creator", the hourglass appears for 3 or 4 seconds but nothing else, cannot access the application.
  Any idea?

  Thank you

  Hello

  Do you have something to change on the laptop before you start the Toshiba Recovery disk?

  It's not easy to say which is the reason, but in your case I would start the recovery of HARD drive option. Go to the advanced boot menu, select fix my computer.