Satellite P300 - 18 M - use the card reader for Vista Ready Boost OK?

Similar Questions

• Satellite A200-1 TB - need driver card reader for Vista 64-bit

  Hi all

  I just bought a new laptop Satellite A200-1 TB and I installed Windows Vista Ultimate 64-bit (x 64) on it but, unfortunately, it did not the mass storage driver (the driver memory card reader).

  Can anyone know where I can download it? I tried on the Toshiba driver page and I couldn't find.

  Thank you.

  Download this file:

  [TI Card Reader Driver for Windows Vista/XP 2.0.0.7 | http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_cardreader_ti_25844A.exe]

  but do not install it via the installer. Unzip using winzip/winrar/7zip and manually update the driver in device pointing to the Directory Manager

  + unpacked_archive_dir + \Windows\tiinst\Vista64

  works fine for me

• Satellite A200-PSAEO: could not find the card reader driver Vista

  Hello.

  I have the Satellite A200-PSAEO and I can't find the drivers for the card reader for Windows Vista.

  Any ideas?

  Thank you very much.

  Hello

  What of the installation of the Flash Media Driver v 2.0.0.6 released on 31-01-08?
  The Flash Media driver is driver for your bridge Media Slot.
  This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  You can find on the page of the European driver Toshiba Satellite A200 PSAE0 download area.

  ;)

• Satellite P300 - 1-9-10 SD card reader code

  Hi all

  I have a new Toshiba P300 - 1 9, good for six months, and have just for the first time I tried an SD card into the slot of the multimedia card digital.
  The card does not appear in 'my computer '. In Device Manager it shows with the yellow sign fault warning of a problem.
  Double click it gives this message "this device cannot start code 10" in the management of the disk of the card is not listed in the upper pane, but shows as a player in the lower pane without a drive letter assigned.

  If I try to assign a drive letter, I get a message saying that the operation failed because the disk management console view is not updated.
  He wants to refresh the view by using the refresh task. Which does nothing.

  I reinstalled the drivers for the SD card listed under disk drives when the card is in, storage controllers and generic volume on storage volumes. I've also updated the driver for SD host adapters.

  A card format made no difference. I know that the card reader is correct because a few days ago, I took an image updated with Acronis TI and then reinstalled the OS from the recovery media. The card worked fine then. I have now put the Acronis image and the map does not work. I had loads of driver updates on the road to Toshiba for various things (but not the card reader) through their service Tempro, including an update of the bios.
  I wonder if the bios update caused the problem. I'm debating whether the BIOS to the default setting.

  I have tried everything I can think and followed by a number of suggestions after googling the problem. The MS Knowledge Base was not very useful and many people seem to have the same problem. I am now at a total loss.

  Thank you

  cheven

  Any ideas would be welcome.

  Thank you.

  Hello

  The 10 error code means that the device cannot start.
  Card reader is not ready and is not running and therefore the SD card cannot be used and is not recognized in my computer.

  In most cases the update driver/relocation should help sort put them this question.
  Satellite P300 - 1 9 belongs to the PSPCCE series.

  The European driver Toshiba page provides the controller driver of card reader for this model of laptop. This is the driver that controls the SD card.

  I recommend that you download this driver. Access the Device Manager, and then uninstall the previous driver. Reboot the laptop.
  After restarting again the OS must find a new device and should request the necessary driver.
  Then you must point to the driver that you downloaded and should complete the installation.

  Usually, this should solve your problem.

• Can satellite P300-20R - I use the latest drivers from site Web AMD/ATI?

  I got a Satellite P300-20R now I want to update the video card drivers - ATi HD4650.

  Can I use the latest Catalyst for the mobility card that I find on the AMD/ATi website, and what is the procedure?

  Toshiba drivers are tested and adapted for certain graphics cards. Driver Toshiba will not force the graphics card to run the highest level and therefore protect laptop from overheating.

  On my Satellite P300, I use Windows 7 32 bit and driver Toshiba. It runs stabile and I'm happy with it.

  To be honest I don t want to use ATI driver and unfortunately cannot give you an answer to your question.

  Can you please tell us which of operating system you are using and what version of driver you want to install?

• Satellite P300-1GK cannot find the display driver for ATI Radeon HD 4650 Win XP

  Hello

  I can't find the driver for my ATI Radeon mobility HD 4650. There is an error on the toshiba Web site download page.
  My laptop is a P300-1GK (PSPCCE). The drivers are for the 3650 etc... not for the 4650. Where can I find the right idea?

  ATI Mobility Radeon HD 4650 graphics card
  VendorID: 0 x 1002
  DevideID: 0 x 9480

  Thank you

  Hello, Damien

  Sorry, but can you please tell me why this driver is not the right one? An error message or what?
  The same driver that Toshiba use for the Windows XP Home edition recovery image.

  Unfortunately my P300 is not with the ATI graphics card and I can't test it.

• My desktop under Vista 32 built in the card reader for SD cards. It does not recognize SDHC cards. Can I make this happen?

  Y at - it an update or a patch that will leave my built in player of card that was installed to SD cards that will recognize SDHC cards? I am running Windows Vista Home Premium on a Lenovo desktop computer.

  Hi slider638,

  You can see the steps in the link of Lenovo below

  http://forums.Lenovo.com/T5/T61-and-prior-T-series-ThinkPad/SD-card-reader-and-SDHC-card-compatibility/Ta-p/238582

  Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

• pictures loaded using the card reader. Press "import." Only one of the 30 photos loaded, saying "1 file. 30 not imported because they are either the catalog or are not supported. second screen says "the file is damaged or is in a format that can not be i.

  Help

  Not easy to follow your process.  How can I get 'live' help by phone?

• Can satellite L350 - 20G - I use the keys function for iTunes?

  I have a L350 - 20G.
  Is it possible to get the funcion of buttons at the top of the laptop (play/pause stop; back; before) to work with iTunes?

  Thank you

  Hello!

  As far as I know, you can only configure the first button that starts the application (iTunes).
  The other buttons you mean like play, stop and pause can t be configured. There is no tool to Toshiba for this available.

  I don't use iTunes, WinAmp you can configure the functionality of the button but I put t know if iTunes allows you to adapt these settings too.
  Try it and post your result. :)

  Good bye

• Satellite A300D-17Z - cannot install the display driver for Vista

  Hello

  There is a big problem with my A300D-17Z.

  The laptop has ATI HD3470 Hybrid Crossfire display system. I'm trying to install the driver in Vista Ultimate, but it does not work. The ATI Catalyst control cannot install and ATI driver file is empty. Shows Device Manager still there are two graphics card with «!» I tried so many ways. Install framework 3.5, pilot of the AMD 7 series, last version of the ATI driver, driver of the same other computer brand who says that worked.

  Please help me, I had been tormented for nearly 48 hours. PLEASE, I BEG YOU!

  Hello!

  Have you tried to install the driver to display on the Toshiba site? You can find it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before you try to install a new display driver, you must remove any old version in Add/Remove programs. Then, restart the laptop and use CCleaner to clean the system. Restart again and then install the new version.

  You have the same problem with the factory settings? In the worst case, you must reinstall Windows using Toshiba recovery disc.

  Good bye

• Satellite A100-062 psaane: can not get the card reader to work

  Hiya... Please can someone help?

  I try to use my card reader with a Pro duo stick.
  I put it in the Pro duo adapter and when I put the card in the slot of the card reader that nothing happens...

  Thank you in advance if you can help.

  cordially imalive

  I use the memory stick duo adapter and when I on it on the inside of my Satellite in Windows Explorer is happening again drive (F) and symbol that shows Memory Stick.

  Try to please several times to put inside. I remember that in my case it worked after the third time I put it in the slot.

• Satellite Pro A100-81: memory Pro Duo card is stuck in the card reader

  I am the proud owner of a Satellite Pro A100-81. I inserted a Duo Pro Memstick into the slot of the card reader...

  The card slipped too deeply into the slot so that I unfortunately can't remove the card more.
  Any ideas how to remove the card?

  Hi Gary

  Are you sure that the laptop computer s card reader supports memory stick Pro Duo?
  It s unusual who supported cards will slip to deep into the slot, something as may occur if the card is not taken in charge and is not compatible with the slot

  However, you shouldn't t do anything hard disk average if you n t know how remove it ask someone to help him with more experience for laptop

• Impossible to use the card on my Equium A100 reader

  I put my SD HC card in the reader and ensured it locks in correctly.
  But nothing happens. Recently, I reformatted my hard drive.

  Can you please tell me which driver I need?

  I saw the latter on the toshiba download page, and to think that they might be useful?
  SD, SD Secure module and also utilities SD memory format.

  I hope someone can help me, because I really need to get this card information!
  Thank you.

  Hello

  I assume you are using Win XP.
  The Flash Media Driver for Texas Instruments is the card reader controller driver.
  Download and install it!

  PS: not all cards are supported and compatible so if a card will not work in the card reader so sometimes this doesn t mean that a card reader driver has not been installed
  In any case, in Device Manager, the card reader should be recognized correctly!

• How to remove the SD of the slot of the card reader - Satellite A100?

  Hello
  Is there someone to help me? I inserted a 64 MB SD card into the slot of the player card of my Toshiba A100 model. This is the first time that I inserted the card. The card is inside the slot. I can't get out! I have no idea how to remove the card from the card reader location. I can see the contents of my SD card, can open files too. But how to remove it out of the slot. Help me please give your idea to remove the card from the slot.

  Arjun

  Hello

  To my knowledge the SD card slot doesn't have a whole extra help as the slot PCMCIA to remove the card.
  You have to remove everything simply. Try to enter the map and move it. You can try using a pair of tweezers. Maybe it helps

• The use of MDT to prevent Windows 7 for assigning driveletters to the card reader

  Hello

  Using MDT 2012 Windows assign driveletters to the accumulation in the card reader. I don't want Windows to assign the driveletters while no card is inserted. How can I make as possible using the registry?

  You should post your question on the forums of the configuration and deployment for Windows 7 on TechNet:

  : http://social.technet.microsoft.com/Forums/en/category/w7itpro/