Satellite P300 - 19 p unable to capture audio using the Chicony Cam software

Similar Questions

• Capture using the video camera software

  Hello
  I want to record the actions of the encoding and insert them in my webhelp project. Here are the steps I followed:
  1 double-click on the video camera software
  Video camera software opens
  2. set the capture area
  
  The help says I should click on the ' save' button once this has been done. However, the button record / stop appear dimmed and Iam unable to take screen captures. am I missing something?
  Thank you
  CP.

  See the following link for instructions on running a program in 256 colors.

  Hope this helps,

  Brian

• Satellite A85-s107 - white screen at startup by using the power of the battery

  Satellite A85-s107 white screen at startup by using the power of the battery

  When I boot A85-s107 in battery power, it is get booted up in the background, but my screen is empty.
  After that if I connect it to AC power and switch deactivation/activation of the laptop power button, the screen comes back to life.

  There is no problem when I start upward when it is connected to an electrical outlet.
  Battery is fully charged and computer will work off the battery voltage if I remove AC after boootup

  Any suggestions?

  PS:

  also note that when I remove AC and then reconnect I start the computer on two occasions that it does not start the 1st time?

  Don t need to recharge the battery if the AC adapter is plugged ;)
  Try the tips posted by Alex otherwise it of a hardware problem, in my view, there seems to be something wrong with the motherboard...
  In this case, only the replacement could help and it could be a costly affair

• Satellite X 200 PSPBUA cannot capture video using the firewire port

  Satellite X 200 PSPBUA 00N007

  I try to capture dv video from a camera via a capture software but is not working/errors generated.

  Tried Pinnacle and free software that do not work. Texas Instruments 1394 OHCI driver exists and works OK.
  Satellite X 200 PSPBUA 00N007 upgraded to Windows 7 64 bit.

  Any suggestions appreciated

  > I'm trying to capture video from a camera via dv capture software but is not working/errors generated.
  What happens exactly? This error message do you have?

• Satellite P300 - Value Added package does not work after the computer restarts

  Hello

  I have a Toshiba Satellite P300 PSPCCA Windows vista ultimate x 64. I can't do my work button soft touch. I downloaded latetest VAT package and installed. After installation it asks to restart but I restart my laptop and I make just restart Flash Card and my button works all good touch app that is silent, Media Player, etc., but once I restart my laptop it stops working.

  I tried the uninstaller and reinstalling but no luck. I read in the forum toshiba on running CCleaner and do a fresh install but still have the same problem.

  Does anyone of you knows how to solve this problem.

  BTW, I got the software AVG internet security on my system, but have added folder toshiba for exclude of realtime scanning just in case if its causing problems but not luck. I searched qurantine folder and its nothing in there.

  Please help me get my work button soft touch.

  Thank you.
  Kind regards
  Jay

  Post edited by: Jay Padia

  Hello Jay

  I agree with Akuma. All you can do is remove VAP preinstalled system and reinstall the latest version. Why you didn t follow the instructions to restart the computer after the installation of VAP?

  I installed VAP several times on my Satellite P200 and Satellite A300 without any problem, but after installing the latest version, I rebooted phone immediately. The procedure of the facilities has been completed and necessary processes started in the background. I guess that's the problem on your Satellite P300.

  If nothing is done the last step is to install the OS by using the DVD facilities. After doing this you will own preinstalled OS and everything works well again.

• Satellite P300 PSPC4E - new battery is not recognized by the operating system

  Hello

  I bought a new battery and it is not recognized by the system
  Satellite p300-PSPC4 win7

  drivers ok
  OK magazine

  The battery is always fully recognized and fully supported. I tried several methods to try to load but nothing happens

  the battery icon is present

  Thank you

  Hello

  Because your old battery is always recognized, I think you bought the battery is not compatible.

  That's why you should buy a compatible battery recommended by Toshiba.
  I think you can buy this Toshiba ASP.

  Welcome them

• Unable to capture video with the Canon Vixia HV40 HDV - why?

  I am unable to capture video HDV via Firewire to my Cannon Vixia HV40. I am running Windows 7 Professional 64 bit on a computer HP DV6T Quad Edition laptop, using the native Firewire interface. I can capture DV standard definition without problem (when the unit is set to DV mode, Windows detects the device and the guests of action - if you select HDV mode, Windows does not, and the camera does not appear in Device Manager).

  So far, I tried to capture HDV in Sony Vegas, Windows Live Movie Maker, Cyberlink PowerDirector 7 and finally HDVSplit (considered as the common denominator of simpler, the lowest for the capture) without success. NOTE: the camera IS recognized in HDV mode. In all the above applications, I can go back, play and fast forward - there's a link that works at least at this level. When I try to capture HDV, I get different results - no success. HDVSplit starts playback on the camera and stops after 3-4 seconds, indicating that no data has been transferred from the camera. If I turn off scene detection, capture runs indefinitely, but the generated file is never more than 0KB. Director of Windows also appears to capture, but the file is still 70 KB and is not valid. Sony Vegas, same, begins the capture but never see any video. CyberLink Power Director, somehow, HDV recorded once a band - and can always record a live camera HD stream.

  I tried a lot of things:

  1 using the older driver 1394
  2 turn HD/HDV
  3 reinstall the capture software
  4 press the 'PLAY' button first, then enable "record", then the workflow is running.
  5. install the Canon software (despite the fact that it contains all drivers for camcorders) - in fact there is no driver for the Canon Vixia HV40. It is supposed to work with the Windows 7 driver. I tried both (W7 and legacy) with the same result.

  The Canon Vixia HV40 is documented as supported in Windows 7 by Microsoft and Canon - and yet there are many people on the Internet claiming to have this problem (although some people report no problems at all). I am sure that I do not see a 'Pink Elephant'. As this is a forum for Microsoft - I would be happy if I could capture in Windows Live Movie Maker - to keep the inconsistencies of the third part of the road. What should I try next? Is there a 1394 a generic driver that is certified to run on Windows 7?

  I went and hooked the camcorder new just to make sure that I can hardly believe it is now capture HDV. Perfect work. Believe me, I've tried evey solution I could find on the internet and it is the only one that worked for me. I found the solution on this forum and started to find only no sooner. I've only used it with Pinnacle Studio 12 so far... never mind, I just tried HDV Split and it works too. I had also planned to buy a SIIG NN-EC2812-S2 and if it had been less expensive, I did not hesitate. I tried from Best Buy's Dynex Express card, but he had the camera recognition problems and sent. I thought that you get what you pay and was actually looking for the best price on the SIIG when I came across the solution. I wish you good luck.

• I am unable to Type or use the keyboard in Firefox 18.0 anywhere, including the search bar and URL bar. How should I fix this?

  I am unable to type anything or use the keyboard to type in Firefox. I use Firefox 18.0 installed on Windows 7.
  I am able to paste in the URL bar and the search bar, but absolutely not able to type in it.
  I already tried the 'reset' option but are still unable to type.
  Also tried Firefox in safe mode with disabled addons but are still unable to type.
  Install a new copy of firefox after Firefox uninstall and delete the old "Mozilla Firefox" in windows folder. but always impossible to type.
  Please tell me a solution to this.

  Have you tried restarting the computer?

  It is possible that you have activated the keyboard by chance to one who does not work in Firefox.

  • http://support.microsoft.com/kb/258824 - how to change your keyboard type

  Windows remembers the setting by application keyboard layout and you have probably changed the keyboard by accident via a keyboard shortcut.

  • http://Windows.Microsoft.com/en-us/Windows7/the-language-bar-overview The language bar (overview)
  • Make sure you have the language bar visible on the Windows taskbar
  • You can do this via the context menu of the taskbar: toolbars > language bar
  • Check the language setting (keyboard) keyboard for the application that has focus via the icon in the language bar
  • You need to do that while Firefox has focus because Windows remember the keyboard by application setting

  Control Panel > regional and Language Options > keyboards and languages > change keyboards > advanced key settings > change key sequence

• Pavilion Notebook 17-G012NA: Audio uses the laptop speakers and not a paired devices

  I have two devices paired bluetooth connected to my computer laptop, but audio still plays through the built-in speakers of Realtek.

  The device is introduced, my laptop confirms its she paired up and I do not see in the circles where I'm wrong.

  There is no problem with the associated devices because they work brilliantly with my phone and turntable.

  Everyone knows this?

  Thank you

  Hello @RG99,

  Welcome to the HP Support Forum's community!

  I understand your message that your Pavilion laptop - 17-g012na will only play audio through the built-in speakers and not the Bluetooth devices are paired.

  These speakers have worked in the past with this laptop? Have you verified that your system is up-to-date available throughout drivers and software?

  Microsoft has a background paper on connecting devices Bluetooth here and also a document of difficulty connections Bluetooth.

  I know from personal experience that some Bluetooth speakers and other devices, even when it is associated with, should click you on them to connect before it will actually start communicating with the PC.

  Please let me know how it goes. If this helps you to find a solution, please click on the button accept as Solution down below in this message.

  Thank you!

• Satellite A200: Need a free software to turn videos I use the chicony webcam

  Hello!

  I wanted to ask if there is any chance of finding a free program with which I could shoot some videos, movies etc with my Chicony 2.0 camera integrated on my Satellite.
  I will be really grateful if you can help!

  Thanks in advance!

  Kind regards
  Plamen

  Hello..
  There is a software called camera assistant software comes with toshiba all... try to find with the chicony driver!

• Satellite L755 - how to return to Windows 7 using the HDD Recovery folder

  Hello
  are how you today

  I own a toshiba Satellite L755.
  I have recently upgraded to windows 7 to windows 8, and now I do not have windows 8. I want to go back to windows 7.

  Many people say that it is possible using the HDD Recovery folder that I have on my D drive and it s 13.5 GB.

  What I need is to know if its possible and if you can you explain to me how its done.

  I searched the Web for an answer for tha last 4 hours and I thank you

  > Many people say that it is possible using the HDD Recovery folder that I have on my D drive and it s 13.5 GB

  A lot of people said you can use HARD drive recovery in order to put the system back to factory settings.
  This true s but this is possible ONLY if the system has not been modified.

  In case you have changed the system, you could go back to the factory settings using the recovery disk!
  Recovery disk may be created using the preinstalled tool called Toshiba Recovery Media Creator.

  Have you created this disc in the past!

• Satellite A100-761: I am not able to use the Bluetooth

  I have bluetooth in my mobile device, however, I am unable to access or use it. My system shows no file or folder to access this device.

  Can someone help me?

  Hey, Pankaj

  Are you sure that this laptop uses BT module at 100%?
  Is the laptop has a BT tag at the bottom of the unit?

  In my opinion the BT module is not installed on the laptop you.
  Some online store sites say that the Bluetooth device is not available. Then I recommend you check the bottom of the camera for a label of BT and more to take a look in the Device Manager if the BT device has been recognized.

• Satellite L310-D4010: OS became dead slow while using the CD/DVD drive

  Hi all

  I bought Toshiba Satellite L310-D4010 in chennai, India.

  It has 2 GB of RAM and processor 1.83 GHz Intel Core 2 Duo.

  But my system became * slow * while I use the optical drive, that is, when I write a disk and copy the content form the drive.

  I was not able to open any application while I am using the DVD player.

  Please guide me to solve this problem.

  Thanking you.

  This is nothing unusual.

  My windows system is also busy when burning the CD or DVD!
  The point is that most of the resources of mobile phone as a disk, CD/DVD player, RAM, CPU, etc. are necessary and run it with maximum performance during this procedure and to be honest not advisable to work with the laptop during a burning, because this may affect the quality of combustion.

  In my opinion there is noting wrong with your laptop, but if you want you could check if some process is not required are running in the background of the OS.
  In addition, you may disable auto-start for some non-material applications while the Windows start the process.

• Satellite L40 - 18Y: corrupt system files - how to use the recovery partition

  Greetings,

  One of my friends bought the Bulgarian electronic Toshiba Satellite L40 - 18Y (PSL48E) from a major retailer and insists on the fact that it came without any CD, but the first time he installed Vista.

  After that some of his other friends have uninstalled Vista and XP for unknown reasons (he says that some drivers and patches were necessary to make XP work properly, I think he might have something on LBA48 and SP1).

  In any case, installing XP died, and the disk share is the file system is damaged.
  After I removed it with gparted I have two disk actions now.
  1st row in the table to partition: ntfs share labeled WinRE (no hidden bootable)
  (He has a stash of file RavMon.exe and autorun.inf which implies that damage to the installation of XP are perhaps caused by a virus)
  Second row in the partition table: empty (installation of XP was)

  Third row in the table to partition: ntfs share with data

  The problem is that the first partition unbootable and act like partition recovery, even when I toggle the boot flag.

  It is all recovery partition and how I should go?
  I read in some messages if you press '0' when the computer starts the Bios it will start automatically, but it did not work.

  A manual which was available for download for this model on Toshiba Support site the key has been specified as F12. It didn't work either.

  I'll be very grateful for directions, solutions or ideas.

  Hello

  There is perhaps a little change to reinstall Vista with the HDD recovery procedure.
  Please check if it would work.
  -Turn on the laptop and press F8
  -Check if there is an option called fix my computer
  -If so, select it, and then choose the last option called Toshiba recovery.

  But to be honest I don t see the chances it would work because you have already removed the Vista from the HARD drive.

  You must have read the user manual before deleting the Vista.
  The manual (Chapter 3), said that if the recovery DVDs has not been handed over with Notepad then you create the DVD using the Toshiba Recovery Disk Creator (is was also preinstalled). The user manual also describes the above HARD drive recovery procedure.

  However, the recovery DVDs can also be ordered here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Help with Audio using the DD Realtek Audio Manager

  Hi all
  
  I recently bought a new computer and tried today for the first time to record audio to one of my movies.
  
  On my old computer, there is no problem, but now that I bought a gateway that has this installed Realtek HD Audio Manager, I can't save.
  
  When I click on the audio button, the guest comes telling me that he will have to establish levels of microphone.
  
  Usually when I talk, it turns green and everything is correct.
  
  Now, nothing.
  
  Is there something with this software Realtek or the passage system which does not allow me to register?
  
  Thank you
  PAM

  Hi, Pam

  I'm not sure how to put it in terms you understand fully, but I'll try.

  When the computers are made, there are certain pieces of equipment which perform the tasks we ask them. This material is provided by different manufacturers. For example, you use a computer brand Gateway, but the internal circuit and the equipment are supplied by different manufacturers. Then gateway buys components from all over the place. And in this case, the manufacturer of the audio component is called RealTek. Audio material can be hard connected directly to the motherboard or it could be a separate and external expansion card that connects to the motherboard via a slot.

  Any hardware component normally requires a component of special software called a 'pilot' to help the operating system (Windows) understand how to work with the material. The driver can also reside in a few different places. It can be supplied on a chip on the motherboard or the expansion card, or it can also exist as a file that is installed in the operating system. Or it could be a combination of the two.

  so, in this case, RealTek is the manufacturer of a specific type of audio material. Unfortunately, no version of Captivate include how to work with the material provided by the manufacturer. The really unfortunate part of all this is while Captivate has problems with it, other software happily works just dandy and won't complain a bit.

  So the answer to the part of your question, is that if you remove any aspect of your software from RealTek, kill you also probably the audio capabilities of your computer. In other words, that no sound would work under Windows or any other software. Regarding the installation of other software that would work, you would seek to eventually buy an extra sound card. Disable the RealTek hardware and install the new card and its associated drivers. And even then, there is no guarantee that it would work with Captivate or even Windows. (My son continued his tail for a literally weeks trying to make a sound card to work in an old PC)

  As you can see, taking that approach is much heavier and more involved that it would be just maybe start Windows Sound Recorder or Audacity, record your audio clip and save it. Then in Captivate, import it into the project.

  What a pain that you would have to work this way? You're talking about. But until developers can so why some material works and some does not, it is what we are facing. For what it's worth, we see a similar problem with Captivate not reliable detection and work with a Headset Microphone that connects via the USB port.

  I hope this was helpful... Rick