Satellite P300 - 19F DVD does not work

Similar Questions

• Satellite A100: Recovery DVD does not work

  I want to restore my Toshiba Satellite A100 laptop to its original factory condition, but the DVD that comes with the package of recovery does not work...

  I have load to start computer press F12, and it starts on the DVD. It says "Loading RAMDISK Image", after which I am told by Toshiba customer service there should be options to clean up the hard drive or restore Windows XP.

  However, after VIRTUAL disk, I see a cursor on a black screen, and then the laptop off and restarts. After the connection, NO CHANGES made...

  What is the problem with that? How can I really use this recovery DVD?
  Someone help me please.

  Thank you.

  Hello

  The recovery procedure is not difficult.
  Just try to boot from the recovery CD or DVD and follow the Guide on the screen line.

  Your problem is very strange. You have created all the partitions on the HARD drive?
  I put really t know why your recovery CD doesn't work properly, but I think you should try to completely format the disk (also partitions), then try to boot from the recovery CD.

  Don't forget that the laptop is in the boot mode. (don t mix the standby or hibernation mode)

• Windows 8 Upgrade, Toshiba Satellite C660 Matshita DVD does not work error code 19

  I just upgraded my Toshiba Satellite laptop to windows 8 and having a problem with my Matshita DVD-RAM UJ890AS. In Device Manager, I got the error "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). Now, I tried to change the registry, but it shows no upper or lower to remove, I also uninstalled the driver and re-installed and I used the automated microsoft fix dvd all to nothing does not. Windows troubleshooting tool shows the problem but can not solve? Help me please!

  HEALED!

  
  
  All you have to do to avoid this error, code19 is to uninstall Toshiba Recovery Disk Creator and Toshiba Recovery Disk reminder. I thought that it had been uninstalled before that I've updated but I was wrong. I just uninstall both and hey presto it works :)

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

• The CD/DVD does not work with El Capitan 10.11.5 on Macbook Pro

  Hello everyone, I spent the time to research on the here and the other site on why the CD/DVD does not work with El Capitan 10.11.5 on MacBook Pro mid 2009. This discussion forum has said that he will not work with the El Capitan software. Any idea or suggestion? Back to Marverick or Yosemite? I tried to use SMC reset, restart, recovery and still the same issue.

  I thank in advance.

  ~ Mike

  I have my doubts that the (10.11.5) software is the problem.  Are you sure that the DVD player is simply not defective?  Have you tried to clean the lens?  What is the State of the disc?

  Your best option may be a date at a bar in engineering of the Apple store for a FREE evaluation.

  Ciao.

• Satellite A10 S203: sound does not work - just enough

  Hello!

  To my satellite A10 S203 sound does not work, I updated my sound card and the bios but nodifferents. Nothing in the system that says that I have something wrong whith my sound is just enough. I tried speakers headphones and challenging systemsounds, mp3, Auidi direct works cd... nothing.

  Any tip?
  [email protected]

  First check the status of the sound card in Device Manager.
  If there is a yellow climbing brand then you should try to reinstall the driver. (first remove it and after reboot, install a new)

  Have you checked the volume setting and the site of laptop? Eventually he s a very simple idea, but believe me, I read many comments here in the forum and a lot of guys forget this option simply.

• Satellite L300 (PSLB8C-0H901X) does not work

  My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no MESSAGE, nothing, lamp power and charge Get when pluged into anything else, any known issues? All the fixes, thank you in advance for your help.

  Of course, your laptop is completely dead. In such situation, there is no magic solution and I m afraid that you need professional help. If there is absolutely no reaction is maybe defective electronic power supply and the motherboard must be exchanged.

  As you know this is part more expensive so you need to check if this is the solution for you.
  Call, explain the situation and let it check your laptop.

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• Satellite U300 - 15 p CD/DVD does not work after installing Win 7 64 bit

  Hello guys...

  I have a portable Satellite U300 - 15 p with 4 GB of memory.
  I installed Windows 7 64 bit one mouth a go and after that, the DVD player does not work!
  Someone knows this problem?

  TKS

  This is the error

  SOFTWARE FOR DEVICE DRIVER HAS NOT BEEN INSTALLED SUCCESSFULLY
  * PLEASE CONSULT THE MANUFACTURER OF YOUR DEVICE TO HELP GET THIS DEVICE INSTALLED *.
  HM-ETmSE DGDGAM GSE - E1eNe ATA DEVICE * X * a failed

  Hello

  You must remove the upper and lower registry key filters.
  First remove the CD/DVD drive device manager.

  Then go to the registry and remove the filter top and bottom of this key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  After this reboot of the laptop.

  For more information, check this:
  http://support.Microsoft.com/kb/270008/en-us

• Satellite C855 - 17M - CD/DVD does not work

  Hello

  I have a Satellite C855 - 17M. nd that the cd/dvd is not working.
  I tried upper and lower in regedit but the file is missing, and said it also the format is not supported.
  Any 1 help me pls pls.

  Thank you very much

  Hello

  What exactly do you mean by not working do not?
  You have problems reading the disc or write data on the disks?

  Which discs have you tried and you have a few problems with the disks?

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

• Satellite A665-S6086 - keyboard does not work after the outpouring of fluid

  I have a Toshiba Satellite A665-S6086 laptop. A couple of months, I spilled the zeroth power and he went on the keyboard. I'm sure that some went through it as well. The computer turns now and I can use an external mouse and external keyboard. Nothing on my keyboard does not work as well as the mouse. I can't go on the internet due to not being able to use the F8 key so.

  The only key/button that works is the power button. The dvd/cd drive works.
  Help, please.

  The external key board I use has no FN key. a f1 to f12, but when I hit the button on the external key board f8 nothing. Please help me get internet light somehow.

  Thank you

  And what kind of help do you expect now? What can we do?
  Why you n t fix it and be happy with the new keyboard?
  How long you want to use your laptop in such a State?

  Contact Toshiba service, let them swap keyboard and clean your laptop. OK it's a bit chilly but you'll well workbook again.

• Satellite U920T - function keys does not work after update to Win 10

  Hello, good morning / evening...

  I use (U920T satellite) and recently updated my Windows 10 Tablet
  but after that, the function keys, volume, brightness, key FN and even the backlight does not work anymore!

  I tried to restore the system and update the driver software but nothing has worked...

  I use these keyboard shortcuts all the time and now it's really hard without them!

  What is the problem? What should I do?

  The problem is that U920T satellite is not listed as Win 10 support unit and, therefore, drivers earn 10 Toshiba and software that controls the FN keys is not released.
  But as far as I know using the FN keys, system of Toshiba and the Support of Flash Card Utility driver must be installed.

  For all Toshiba units win 10 supported, the drivers can be downloaded from this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Maybe you can try the drivers released for other models of portable Win 10 supported...
  I'm not sure if the software will be compatible with your model of U920T, but its certainly worth a try...

• Installation of Ubuntu 14.04 on Satellite NB10t-A-101 does not work

  Hello world

  Sorry for my English: it is not my mother tongue. I'll try to explain my problem.

  I would like to install Ubuntu 14.04 on my computer (Toshiba Satellite NB10t-A-101), but it does not work.

  I boot on my USB (made with RUFUS), but it works once for each five times.

  After you install the operating system, when I restart the system, the computer does not find an operating system (I precise that I already check the EFI BIOS and disable secure boot)

  How to install Ubuntu?

  Hello

  This series of portable was equipped with a processor Intel Celeron 2810 n and this CPU belongs to the new Intel BayTrail platform.

  The * Intel deposit path * allows only the installation and utilization of systems capable of UEFI as Win 8 or 8.1 Win

• Satellite A500 - 14Q - Microphone does not work

  I have the Toshiba satellite A500 - 14Q for about 3 years. I changed the hard drive, keyboard, frame of the monitor until now, and I'm sick and tired of this laptop does not properly. Now, I've discovered that my microphone does not work. There is no problem in device, or with the driver manager. I hear that crackling noise when I try to enter any other micro device.

  Can anyone help please?

  P. S. I have windows 7 (64-bit)

  How did you test the mic feature? With the help of tool tape recorder?
  > the monitor framework
  Perhaps you have made a mistake and mic is not connected correctly. Did you do it alone or it was done by the Toshiba authorized service provider?