Satellite P300-1EI (PSPCCE) - how to allocate more memory to the graphics card?

Similar Questions

• Satellite P300-1EI (PSPCCE) - how to upgrade the BIOS?

  Hello everyone,

  I want to update my BIOS and I am running Windows 7 32 bit. On the Toshiba site, I found this update: of the bios-20090226125740.
  It's the good update?

  How could I do to update Windows (I have no floppy).

  Thanks for your reply.

  Hi banditito,

  The first important question is: BIOS update is really necessary?
  I mean if you notice any problems with your laptop I n t see a reason to update. This update is a bit risky if never touch a system! ;)

  In addition, the update is designed for Windows and you don't need a floppy drive!
  Extract all files from the archive zip and start the update. But before this, close all programs running (also, AntiVirus and firewall), disconnect from the Internet and then start the update.

• allocate more memory for my video card

  model of my laptop is HP Pavilion dv4-1444dx entertainment notebook pc. I want to put more memory for the video card. my friend told me that I can assign more ram to my video card. I wanted to reach a certain condition for a game, but the "dedicated video memory" is only 64 MB. the allocated memory is 1.2 GB. I want to increase dedicated video memory. Help, please. Thank you.

  Hello

  Unless you see a BIOS setting allows to allocate more memory from the memory installed modules, it cannot be changed. I just checked the service manual for your laptop series. There is no setting in the BIOS, so the answer is that you can not change it.

  Your best bet is to increase the installed memory to the maximum, depending on whether your OS is 32-bit or 64-bit.

  A 32-bit operating system may use no more @3.2 than GB of RAM while a 64 bit OS can use as much as the motherboard of your laptop (by design) will accept.

  Best regards

  ERICO

• Cannot allocate more memory to the virtual machine image

  Hello

  I am currently using VMWare Workstation 5.5.4.  I have a Win XP image that I run.  My host computer has 4 GB of ram (3 GB recognized by hospitality Windows OS).

  Currently, I am only able to allocate a maximum of 1 372 MB to my virtual machine Image.  I want to allocate more memory to my image, as I do more memory intensive tasks to my image.  If I try to increase the amount of memory (even to 1376 MB), I get the following error message:

  

  Any ideas on how I can increase the amount of memory I can attribute to my image?  I use only 1 image currently.

  Loking at your vmware.log file, I see that you have a section "DEFAULT USER" including a "prefvmx.allVMMemoryLimit = line 1429". I believe that it is in conflict with the ' SITE HOST/DEFAULTS ' section which specifies "prefvmx.allVMMemoryLimit = 2297".

  The ' HOST/SITE DEFAULTS' config.ini is the traditional config.ini file that people recommend that you edit.  On XP, it should be located in C:\Documents and Settings\All Users\Application Data\VMware\VMware Workstation\config.ini

  I can't tell you exactly where the file config.ini 'DEFAULT USER' is located on Windows XP as I am running Vista.  I would start by looking under C:\Documents and Settings\\Application Data\VMware\VMware Workstation\config.ini to see if this file exists.  Or you can search your hard drive a config.ini file that contains the 'prefvmx.allVMMemoryLimit = 1429"line.

  I would recommend not not using the "DEFAULT USER" config.ini file at all.  In fact, on a default installation of Workstation 6.5 this config.ini file does exist.  I would recommend so transfer config.ini 'DEFAULT USER' settings to the "HOST/SITE DEFAULTS' config.ini and then delete the file config.ini 'DEFAULT USER '.

  After this is done, try again and let us know if things work better.

• Can I upgrade the memory and the graphics card on Satellite A60

  Hi all..
  I have a satellite a60 652.
  I want to improve it with new ram and graficcard.
  can I use more than 1, 5 GB of ram? later with an update of the bios?
  and if I can change the graficcard? If the answer is Yes... What is the best card I can actually use?
  or is there a map which is almost a geforce 7600 or 6600 (or ati 9700) I can use?

  Thank you for the help
  Ingo

  PS excuse my English ;)

  > I want to upgrade the ram and the new graphics card

  Upgrading RAM is possible but the graphics card is unable to be updated!

  If you want to upgrade the memory you could update to 1536 MB max.
  The A60 supports 512MB internal memory and it is so that one memory slot where the extra RAM module can be inserted.

  These modules are compatible:
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  Concerning

• I use Adobe Photoshop CC 2015 and it takes a long time to open... too long!  How can I allocate more memory to the program photoshop - I have a lot on the computer, but photoshop is a great program and needs more juice - need help!

  More memory to an application.

  Hello...

  Try not to have too many applications running at the same time, you use Photoshop. Freeing system resources.

  Adobe recommends up to 8 GB of RAM here > https://helpx.adobe.com/photoshop/system-requirements.html

  You can see how much memory is installed on your Mac by clicking on your Apple  menu then click on about this Mac, then make sure that the "View" tab is selected.

  The amount of RAM is installed on your Mac is noted here.

• How to add more ram Intel hd graphics card

  Hello

  my computer is a Compaq Presario CQ57 206TU

  It has a graphics card intel HD

  I know that memory is shared and I recently added another 6 GB to my ram, so I constantly about 6 free

  I liiked in bios and I don't seem to have an option to devote more memory to it, its video memory is limited to 100 MB and which really is not enough

  It Windows 7 64 bit

  Hello

  With Intels Dynamic Video Memory Technology (DVMT) active is not serious so I think with a lot of computers HP, no option in the BIOS. Shirt: you can not do this, the system will work to himself.

  Kind regards.

• Satellite P300 - 1DT PSPCCE - how to change the keyboard

  Hello

  I am looking for documentation of disassembly for my laptop.
  I need to change the keyboard. I have 2 letters that are broken.

  Thanks a lot

  Clickservce

  Hello

  Disassembly guides are not for the public, you can download the manual on the official website of Toshiba. I've never seen there other documentation.

  In any case, exchange of keyboard should not be complicated. Just remove the keyboard between the speakers and the keyboard stand. After that, you can lift the keyboard itself but be careful with the keyboard under the keyboard cable. You must remove it also.

  Good luck! :)

• How to allocate more space for the restore points

  with the new restore points that the system made by himself, I lose a few old for which I was sure and have been designed in a very good condition.

  Hello

  This will help you control the Restore Points:

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to turn System Restore on or off in Vista
  http://www.Vistax64.com/tutorials/66971-system-restore.html

  Adjustment of the amount of disk space, System Restore uses for restore points
  http://bertk.MVPs.org/html/diskspacev.html

  How to change how much Space System Restore can use
  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
  http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

  ShadowStorage vssadmin commands
  http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
  http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

  Guide to Windows Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
  backup and at the time when there are high levels of input/output
  http://support.Microsoft.com/?ID=826936

  A good utility:

  Explorer of the shadow - free
  http://www.ShadowExplorer.com/

  Hope these helps.

• How to set the use of video memory on the graphics card to my laptop cq56-110us?

  Hello

  I have a PC Compaq laptop CQ56-110us.  Windows 7 says is has 797 MB video memory shared from the main memory of 2 GB.  I want to reduce the use of video memory, i.e. 256MB.  Is this possible?  If yes how.  I would appreciate help with this.

  Thank you

  Don

  Don, welcome to the forum.

  Built-in memory is allocated by the system.  As more video memory is required, is allocated.  There is no way that you can change.

  If your problem is solved, please click "accept as a Solution.

• How do I change or update the graphics card on a HP ENVY 17 - j020us Quad Edition Notebook PC

  I want to know if I can add another video card or if I can swap the video card to intel-4400 HP provided with this computer. I tried to look on the sites of HP and may not know if the graphics card is integrated or if she is separated.

  Hello

  The 'Intel HD graphics 4400' is soldered to the motherboard (or integrated) and you can not change or Exchange. You have to live with it and save the money to buy another machine.

  Kind regards.

• How to pass the Satellite P300-1EI for Win XP

  Hello

  I just bought the P300-1EI Satellite with windows Vista Premium (32 bit), and I'm trying to downgrade it XP OS.
  Is there a guide how to do this or at least where can I get the drivers (graphics and webcam...) full xp for this laptop.

  Thank you.

  Hello

  You need a guide how to install XP?
  Well my friend, if you need this guide then I recommend reading some threads here in the forum on the installation of Win XP on the new series of laptop as P300, A300, L300, etc...
  There are hundreds, son of nay, thousands on this theme! Search, read and learn

  Satellite P300-1EI seems PSPCCE series and released all the XP drivers for this laptop.
  Just check the European driver from Toshiba site.

  A hint; You must include the SATA drivers.

  Welcome them

• Satellite P300-1EI - is a second HARD drive possible?

  Hello

  Before to change the hard drive for more capacity, I would like to know if this laptop is capable of managing 2 hard drives?

  There are 2 places to a physical hard disk, use for the current HARD drive and the second is empty. The connection is present, but I don't know if it's usable? The coverage is also different, he did not use to put something in this space...
  If someone could give me some information about this second location?

  Thank you

  If you see a connector in the second HDD bay it is possible to use a second s HDD.
  Try it, but I think it should work.

  As far as I know for the Satellite P300-1EI you need a SATA 2.5 HARD.

• Satellite P300 - 219 PSPCCE - what should be the optimal heat of CPU?

  Hello there;

  I use for my laptop Satellite P300-219 (PSPCCE) newly bought about a week now. When you type I can't help noticing, the place where I put my left hand, I want to say the empty space to the left of the touchpad, feels much too hot. I looked for the manual and I have learned that it is where the CPU.

  Then I searched for a way to measure the heat of CPU, and after having tested some programs with too many different measures, I led to believe that the 'CPUID hardware Manager"gives the best results, after you set the correct value TJUNCTION.

  Here are the steps I get today while typing this message:

  ACPI hardware monitor
  Temperature 0 45note ° C (112 ° F) [0xC6E] (THRM)

  Intel Mobile Core 2 Duo T6400 hardware monitor
  Temperature 0 56a ° C (° F 132a) 0 x [31] (Core #0)
  Temperature 1 54a ° C (° F 129a) 0 x [33] (Core #1).

  Monitor hardware ATI Mobility Radeon HD 3650
  53A temperature 0 ° C (° F 127a) (GPU Core)

  Hardware Hitachi HTS543232L9S monitor
  Temperature 0 37â? Â ° C (98A? Â ° F) (0 x 25) (Assembly)

  From now you mind, windows taskbar indicates that I use roughly about 15 & 35% CPU. After a little use, I even though the CPU heats by a maximum of 69a ° C.

  The truth is, I don't know what to do with these readings, is my laptop which works very well, or he has problems? Could someone please tell me what should be the optimal level of heat for a P300, or where I can learn?

  Thanks in advance.

  Hello

  In my opinion, everything is ok with your laptop, buddy and the temperatures are quite good. Don t be to worry about this!
  If your laptop could overheat, it would have to close or freeze immediately. If this isn't the case, everything is ok with the temperatures.

  What you can do is to change the cooling method in Windows power management. Here, you change between performance and battery optimized cooling.

  By the way: you should also clean your laptop at any time. I clean my laptop every 3-4 months using a jet of compressed air. This blows the dust from the cooling fans.

  Welcome them

• Satellite P300 - 21 k - how to use the mouse Toshiba BT wireless

  Hello

  I have a new Toshiba blue tooth wireless mouse and I tried to make it work with my Satellite P300 - 21 k, with a Bluetooth dongle.
  But the mouse does not work, help please.

  I'm not very good with technology is if there is a guide step by step to set it up with the dongle.

  Thank you
  Mike

  Hello

  I think it is not very complicated to install and configure this mouse.

  Simply activate the BT on your P300 using the FN + F8 key combination.
  This combination FN active WLan too so don't forget that you have chosen BT!

  I don't know if you have to choose new BT connection such as the use of a BT keyboard or a mobile phone, but first try without creating a new connection perhaps the mouse will be recognized automatically m.

  Here, on this Toshiba BT portal, you will find also some details about BT:
  http://APS2.toshiba-tro.de/Bluetooth

  Good bye