Satellite P300-1EX slow (high) ping - card Atheros AR9281 WLan -.

Similar Questions

• Satellite P300-23F-mini-PCI Wireless card Replace?

  Question: would it be possible to replace the card of wireless mini-PCI Intel 5100AGN with version 4965AGN or 5300AGN?

  The thing is, recently I bought the Satellite P300-23F. Great laptop. Apart from one thing. I use the Intel 5100AGN wireless. Type of damage, the rest of the components used to build this laptop are high-end. I would have liked to see the 5300AGN of even the old 4965AGN adapter instead. These are both a bit more expensive, but still on the market for the price difference is a simple slice of $20. The 5100AGN TX is only 150 Mbit, which is half as fast as the two other Intel wireless modules. In general, a lot of people seem to have problems with the 5100AGN, seems to be a troublesome product altogether.

  Performance of the real world of the 5100AGN on a Linksys WRT54G is around 15 Mbps (1, 8 MB/s). My other computer laptop, equipped with a 4965AGN will be double that in the same circumstances. Tried all the drivers I could find, but the above values are the best I can get.

  Hello

  I think that this should be possible, but you must use Mini-PCI cards.
  The antenna WLan that is placed behind the screen provides two sons; black & white.
  A white cable normally goes to the HAND and a black to the auxiliary voltage

  Greetings

• Re: Satellite P300 with Windows7 - wireless network card can not find my BT homehub

  After istalling Windows 7 on my Satellite P300 card wireless LAN Atheros can't find my bt homehub.
  I tried to change the channel on the hub and updated to update all drivers, but still no luck.

  Any ideas anyone?

  The wireless network card is properly activated?
  This BT hub is not known to me, but check settings WLAN hub and laptop and updated on both devices to run on the standard G only.

• Satellite P300 - very slow

  I recently put a Satellite P300 from a guy on ebay, it seems to be very slow. Can anyone suggest what I can do?

  Thanks for your time and your help. (apart from him giving back lol)

  Hello

  What to say? I think that it of not possible to say something because nobody knows what operating system you are using and what things software you already have installed maybe you can add this information

  Usually these problems are related to the OS if a lot of software is installed. Therefore, it would be useful to reinstall Windows

• Satellite P300-150: slow processor during the test with the id tool intel

  Hello

  I just bought a Satellite P300-150 and it was working well in general... play lotro with few problems, but not in dx10 cos it chuggs as hell.

  I noticed he had a genuine problem of warhead of the crisis in the recommended settings, but thought it was just cos he couldn't do.

  But I downloaded the untilty of Intel processor id and he gave the following results... as you can see on the bottom 4 lines the processor is very upset with the expected results for the frequency and buses (fewer than half actually).

  Intel recommends if there is a huge gap, I need to contact the manufacturer... which brought me here.
  Any advice before contacting tech support directly?
  Just maybe I can play warhead after all! : o).

  Utility to identify processors Intel (r)
  Version: 3.9.20080910
  Timestamp: 2008-10-03 22:27:03
  Number of processors in system: 1
  Current processor: #1
  Cores per processor: 2
  Disabled cores per processor: 0
  Processor name: Intel (r) Core (TM) 2 Duo CPU T8300 @ 2.40 GHz
  Type: 0
  Family: 6
  Model: 17
  Step by step: 6
  Review: 60 ° C
  CPUID level: has
  L1 Instruction Cache: 2 x 32 KB
  L1 Data Cache: 2 x 32 KB
  L2 Cache: 3 MB
  Packing: FC-PGA/BGA
  EIST: Yes
  MMX (TM): Yes
  SSE: Yes
  SSE2: Yes
  SSE3: Yes
  SSE4: Yes
  Enhanced Halt State: No.
  Execute Disable Bit: Yes
  Hyper-Threading technology: No.
  Architecture Intel 64: Yes
  Virtualization Intel (r) technology: Yes
  Expected processor frequency: 2.40 GHz
  Frequency of the processor reported: 1.07 GHz
  The expected system Bus frequency: 800 MHz
  The reported system Bus frequency: 357 MHz

  Hello

  Satellite P300-150 was equipped with the Intel Core 2 Penryn T8300 processor.
  This processor supports Enhanced Intel SpeedStep technology.

  Enhanced Intel SpeedStep technology allows the system to dynamically adjust the tension and the processor core frequency. This means that the CPU doesn't always work with maximum performance, but only if it of needed. This helps minimize the heat dissipation and allows to secure the battery energy!

  The CPU seems to be slow check with the Intel ID tool ;)

  For more information on Intel Enhanced Intel SpeedStep Technology check out these articles from Intel:
  http://www.Intel.com/CD/channel/reseller/ASMO-na/Eng/203838.htm

  http://www.Intel.com/support/processors/sb/CS-028855.htm

  Welcome them

• Satellite P300 - 1-9-10 SD card reader code

  Hi all

  I have a new Toshiba P300 - 1 9, good for six months, and have just for the first time I tried an SD card into the slot of the multimedia card digital.
  The card does not appear in 'my computer '. In Device Manager it shows with the yellow sign fault warning of a problem.
  Double click it gives this message "this device cannot start code 10" in the management of the disk of the card is not listed in the upper pane, but shows as a player in the lower pane without a drive letter assigned.

  If I try to assign a drive letter, I get a message saying that the operation failed because the disk management console view is not updated.
  He wants to refresh the view by using the refresh task. Which does nothing.

  I reinstalled the drivers for the SD card listed under disk drives when the card is in, storage controllers and generic volume on storage volumes. I've also updated the driver for SD host adapters.

  A card format made no difference. I know that the card reader is correct because a few days ago, I took an image updated with Acronis TI and then reinstalled the OS from the recovery media. The card worked fine then. I have now put the Acronis image and the map does not work. I had loads of driver updates on the road to Toshiba for various things (but not the card reader) through their service Tempro, including an update of the bios.
  I wonder if the bios update caused the problem. I'm debating whether the BIOS to the default setting.

  I have tried everything I can think and followed by a number of suggestions after googling the problem. The MS Knowledge Base was not very useful and many people seem to have the same problem. I am now at a total loss.

  Thank you

  cheven

  Any ideas would be welcome.

  Thank you.

  Hello

  The 10 error code means that the device cannot start.
  Card reader is not ready and is not running and therefore the SD card cannot be used and is not recognized in my computer.

  In most cases the update driver/relocation should help sort put them this question.
  Satellite P300 - 1 9 belongs to the PSPCCE series.

  The European driver Toshiba page provides the controller driver of card reader for this model of laptop. This is the driver that controls the SD card.

  I recommend that you download this driver. Access the Device Manager, and then uninstall the previous driver. Reboot the laptop.
  After restarting again the OS must find a new device and should request the necessary driver.
  Then you must point to the driver that you downloaded and should complete the installation.

  Usually, this should solve your problem.

• Satellite P300 - 18 M - use the card reader for Vista Ready Boost OK?

  Hello

  I have a P300 - 18M, and due to get a new phone, have a spare Micro SD 8 GB card.
  I put it in the card reader, and I currently use it for Ready Boost, even though I have 3 GB of RAM, there is certainly a performance gain...

  However, no one knows if this could endanger the card reader? (IE damage it in any way) to be used all the time?

  Thank you

  Jack

  Hmm. I wonder about the 8 GB card Micro SD.
  As far as I know and according to some details in the internet, Satellite P300 supports the microSD (with adapter) 512 MB to 4 GB.
  Usually the laptop card reader s should recognize either large 4 GB microSD cards.

  However I doubt it might affect the functionality of the card reader in the worst case that the 8 GB microSD card will not be recognized by the card reader

  See you soon

• Re: Black screen on Satellite P300 after removing the SD card

  Hello @ community!

  I had a P-300-21Z. 1 month.
  Last time I got the shot screen SD card in black and never returned to normal...

  The PC works fine on the external screen...
  I can see what is on the computer laptop screen at the back but is almost completely black...

  My guess is it is the lamp of the screen burned!

  What do you think?

  Thank you.

  > I can see what is on the computer laptop screen at the back but is almost completely black...
  Sounds like an inverter problem.

  The FL inverter (very small part behind the screen frame) is responsible for the backlight of the screen and it controls the backlight.
  If the FL inverter will start to malfunction, then you would see everything as behind a fog of ticks, I think this is your case

  I recommend contacting ASP which would be able to help you.
  The P300 notebook is not very old, and I think the warranty to be valid.

  See you soon

• Satellite P300 - 220 (PSPCCE) and express card FireWire

  I have problems with an IRQ that is shared between the firewire (IEEE1394) and ati mobility radeon 4600. (the IRQ used by both devices is 16)
  Sharing this make my firestudio presonus (external FireWire sound card) problems when playing music on my DAO.

  I would buy an Express card for this problem, but I have to be sure that it won't be the same IRQ (16) than the other firewire connection.

  If you use such a card please check wich IRQ is used when it is connected on the laptop.
  You can see with Device Manager.

  Thank you very much.

  toskidus

  Hello

  The Windows operating system controls and assigns automaticity all remedies to all controllers!
  In my case the SD host controller and the graphics card share the same IRQ 16 and there is NO conflict.
  So I doubt that your problem is related to the same IRQ which is used by firewire and graphics card.

  Sorry, but that's all I can suggest about your question

• Satellite L755D-120: slow down the speed of 20mbps WLan

  Hello

  I have an internet connection of 70mbps/10Mbps and when my laptop is connected to the router with a wire, I have this internet speed.

  But when I use the WIFI connection on my Toshiba Satellite L755D-120, I get only a speed of approximately 20 MB/s down. My router is a DLink DIR-615 router and my laptop is compatible with the 11n networks.

  However, I have a USB adapter, which is not supported by 11n, but when I use that even to get a speed greater than without it--about 27 Mbit/s. How can it be possible?

  I was wondering about the possibility that the laptop isn't suppert 11n, even if the specifications of the product tell you?

  Thank you.

  > But when I use the WIFI connection on my Toshiba Satellite L755D-120, I get only a speed of approximately 20 MB/s down. My router is a DLink DIR-615 router and my laptop is compatible with the 11n networks.

  The laptop seems to bear the 802.11(b/g/n) Atheros AR9285 WiFi card.
  So, you can use the standard 802.11 b, G or N.

  Are you sure that the Wlan card is set to N?
  You can check in the Device Manager-> card WLan-> properties-> Advanced tab

  By the way: the 802.11 standard would operate the frequency of 2,4 Ghz because that 5 GHz is not allowed for an 802.11 wireless network cards support and therefore slower.
  http://APS2.toshiba-tro.de/KB0/TSB0502VM0000R01.htm

  A question: you are using the latest driver?

• Satellite P300-1AE - card upgrade memory

  Hai,

  I own a number of satellite P300-1AE PSPCCE-00K003BT.
  The specifications of the product on the memory of this laptop are:
  Standard: 4 096 (2 048 + 2 048) MB
  Max at: 8 192 MB
  Technology: DDR2 RAM (800 MHz)

  I had the following problem:
  I'm not able to find the specifications to improve my memory from 4 GB to 8 GB.
  I have download some programs of + capital + for example, they said the follow-up:
  My max memory is 4 GB
  Installed current 4 GB
  Places available: N.A.
  DDR PC2-6400
  ("our system scanner could not make a complete match")

  On every single site, I'm going to purchase memory upgrade like kingston or crucial... I can't find my P300 laptop-1AE between the other toshiba, I can't also chose a more general option for the P300.

  Also on the toshiba site I found after a long search: 4 GB memory PC2 DDR2 (800 MHz), but then again... The P300 or more specific to my 1AE P300 is not in the list compatible models.

  If at this point I got very confused which memory I need to buy to upgrade for a total of 8 GB of RAM... I don't want to waste money to buy the bad...
  I even started to think that I could have more than 2 Bank for memory slots in my laptop? I started my BIOS and all he said was "total memory: 4 096 MB", so this has not helped me be...

  If concrete...
  Should I replace the cards of 2 x 2 GB (installed) 2 x 4 GB cards? or do I have to buy 2 x another 2 GB and put in 2 other still empty slots? Or do I only 2 slots?

  If I solved this problem... those who do I need to install? What are the specs?

  I hope that my question is not too complicated, I really hope someone can help out me!

  Thanks in advance!

  Post edited by: Jorch

  Hello

  According to specification for laptop, your laptop can be upgraded up to 8 GB. Toshiba recommends the use of the 4 GB Ram module compatible with PA3670U-1M4G part number.

  My advice to you is: buy high quality RAM and you will have no problem as a lot of other people who want to save money and report subsequent here on compatibility issues. You can check this thread and you will find that most of them have problems with the essential modules.

  Buy RAM from Kingston of high quality and you will have no problems.

• Satellite P300 PSPCCE: Atheros AR9281 wireless network adapter are not all networks

  I have a Satellite P300 PSPCCE with Atheros AR9281 wireless network.

  After a clean install of Windows 7, I can't see wireless networks, unless I connect an Ethernet cable to my wired network card.

  As soon as I take the cable on wireless networks disappear. This computer had Vista and it worked fine there. I tried latest drivers available from Toshiba, but that makes no difference.

  I have tried disabling the wireless and turn market as well with the FN and F8 key and switch on the front. I also tried to uninstall. But it's always the same.

  If someone has had this problem and is there a solution to this?

  Bjarni cordially

  Hi mate

  To be honest I never did experience even with a WiFi card and I have no idea why the LAN cable affects WLan card functionality, it makes no sense to me!

  First, I recommend that you check the settings of the router and reset if necessary
  In addition, you should go to the s for laptop BIOS settings and set its default value.
  Check the version of the BIOS if newest is available, then an update would be worth a try

  You use the Atheros Wlan configuration tool?
  If this is not the case, try this out!
  It s a configuration tool that could be used instead of owning windows wlan settings

• Slow down the WLAN with my Satellite P300

  I bought a Toshiba Satellite P300 with Vista. I dislike Vista so instead, I installed Windows XP Home Edition.
  The problem is that I have a very bad speed of my wireless network 1.15 Mbit/second, with specifications plus another, I have 10/15 Mbps.

  This is a problem and I don't know how to fix it.
  Would this card/wireless network in the computer?
  After installation of xp, the computer does not find, I try a few things now an Atheros card is in the list.

  Help:

  Hello

  What version of BIOS is installed on your laptop satellite?

• Re: Satellite P300-19F: Win XP - bus high definition audio is not ok

  Hello!

  I have a Satellite P300-19F with Harman/Kardon. I have just this downgrading to XP and I have a problem with the audio drivers.
  I installed the drivers that I download from the toshiba web but the "audio device on high definition audio bus" is not installed successfully, and the sound is not good.

  Can you help me?

  Thank you very much.

  Post edited by: pozpozda

  Hello

  I noticed that aid of t don SP3 in all cases.
  First, the best solution is to install Win XP SP2, and then register the mentioned patches. Then restart the laptop and install the sound card driver.

  If still get you some yellow exclamation points then the brand of the device and remove it from the Device Manager list.
  After restarting again the device to be recognized by Win XP again and you can complete the installation driver sound.

  See you soon

• Satellite P300 - stuttering with new BIOS and drivers for sound card

  I have Toshiba laptop Satellite P300 (PSPCCE) with Vista and the latest patches installed.
  Everything was working ok until I installed the last set of patches, has been the Tempro alert about them. I installed the new BIOS (3.40) and card drivers his (Conexant 4.83.1.0) and now all the minutes I see spike high CPU spike freezing enemy of system one or two seconds.

  I see in Process Explorer these spikes are caused by the system and that usually means drivers.
  Anyone else noticed something similar since the last update?

  BTW. There are 2 audio drivers to download site, 4.36.10.0 the 25.05.2009. but the file is named 20081201122001 sounds. ZIP and 4.83.1.0 as of the 07.05.2009. named sound - 20090507143928.zip but with a date more recent AI apparently from 2008.

  > btw. There are 2 audio drivers to download site, 4.36.10.0 the 25.05.2009. but the file is named 20081201122001 sounds. ZIP and 4.83.1.0 as of the 07.05.2009. named sound - 20090507143928.zip but with a date more recent AI apparently from 2008.
  I think that you should use the most recent version and it s a v4.83.1.0. It seems that the v4.36.10.0 was published also, but in this case, it s always recommended to take a newer version.

  With regard to the system of freezing for a second or two:
  I think that this might be related to some background processes. Perhaps a process that runs in the context of the Vista operating system causes this tiny interruptions.

  Of my knowledge tool Tempro runs in the background and scans the system and HARD drive.
  You can check the processes in MSCONFIG and if necessary may disable some of the trials.