Satellite P300-1GN is unable to save using the audio online

Similar Questions

• Satellite P300-1 c 7 - impossible to install the audio driver

  Hello!
  I need help!

  I want to find the driver for the sound (Satellite P300-1 to 7, Windows XP). When I download the driver called "sound driver" of your site, my laptop gives me the trace message that the device for the driver cannot be found.

  Could you please tell me why this error occurs?
  Thank you.

  You have installed all the service packs for Windows XP?

  Satellite P300-1 c 7 belongs to the series PSPC4E then you have chosen the right model?
  Check again!
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you installed the chipset front driver?

• Satellite P300-1gn starts up it free or by touching the Mute button

  My satellite P300 1gn starts that it self.
  It starts also toutching the Mute button or button CD (they are part of the extra of the enlightened next buttons set the power button. Is it possible to disable these keys additional lluminated?

  I wonder that it is a hardware issue or a result of a virus?

  Help, please.

  Hey Buddy,

  It starts by itself from the standby or hibernation mode? Or when you turn the computer off completely?

  Have you tried to load the default settings in the BIOS?

  The laptop must usually start only when you press the power button. If it is an update of the BIOS might be useful in this case

• Can I downgrade my Satellite P300-1GN from Vista to Windows XP Home edition?

  I bought a Toshiba Satellite P300-1GN with preinstalled Windows Vista Home Premium (PL) on this subject.
  Given that some of the th sotware I use only works on XP I have to install XP on my laptop.

  This laptop works with XP?
  Is it necessary to have any special disc or can I install from an ordinary copy XP (boxed version) are all the drivers available?
  Any tips how to perform the downgrade?

  Help, please.

  You can install WXP on your model of laptop. It's Windows XP Home supported and you can find all the necessary drivers WXP, tools and utilities on Toshiba support download page - http://eu.computers.toshiba-europe.com

  For Windows XP Home edition, you can use disk Microsoft facilities.
  On this forum, you can find hundreds discussions on installing WXP on Satellite A300/P300 with instructions specific to how to proceed. Therefore, use the advanced search option and read a little what others have written about it.

  If you still need assistance please let us know.

• Satellite P300-16N - what battery should I use?

  Hello

  my battery is broken and I don't know which I need to order
  my pc is a satellite p300 16N, but I do not know the mah and so on
  can you please give me the reference to the order?

  Thank you very much

  Hello

  As far as I know you could use a battery - Li-ion, 6000mAh PA3537U-1BRS part number 9-cell
  You can also order a new battery to a Toshiba service partner in your country.
  They have access to the head stock Toshiba so this part may be ordered directly from Toshiba

• Satellite P300-1GN: greenish tint in the upper left corner of the screen

  I recently bought a Satellite P300-1GN, best laptop, I have ever bought!

  I booted up one morning to find a greenish hue in the upper left corner of the screen, at first I thought it was a graphics issue, but after looking closely, saw there was a line of crack/straight lines in the screen itself.

  Fig 1: [http://onfinite.com/libraries/1506419/600.jpg] sorry for the bad quality, camera phone.

  Photo 2: [http://onfinite.com/libraries/1506420/600.jpg]

  Then I had a glance at the back of the laptop to see if there was marks, see if something had been abandoned or struck, but no indication of that.

  Now the crack grew, and instead of going down, it goes right through the screen :(

  Photo 3: [http://onfinite.com/libraries/1506421/600.jpg]

  Could anyone help as to what could be the cause, and if it is covered by the standard warranty 1 year?

  Hello!

  To be honest, I've never seen such a display problem, but for me it seems to be a malfunction of the internal display. Looks like the internal display is broken somehow

  I think that in this case you need professional assistance from an authorized service provider. Technicians can check the display and tell you how it happened I think.
  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• I'm unable to save all the files on my pc which runs with Vista Ultimate operating system

  I'm unable to save all the files in any application. The dialog box type of flickers in the background, but nothing happens.
  Happens if I am recording a chart on the web using a web browser. Happens when I create a file in Excel or Word, Paint, and Serif (possibly other applications which I am not using at the moment) and then click on "Save as."

  It happens if I opened a pdf file from any source (be it on my drive hard or on the web) and click on "Save as" to save another copy.

  It happens when I'm using a web-based e-mail service, and if I want to add an attachment, as soon as I click on the Upload button, nothing happens.

  It happens when I try to export a scanned image of my scanner, to a file.

  I get no error with the exception of this shimmering when one would expect to see a dialog box.

  But, it happens when I create a new file in Notepad, which is a weird exception

  It started to arrive 3 days ago, and I have not loaded any new software changed the settings I can think. (with the exception of mcAfee who has downloaded an update almost everyday)

  I restarted my computer several times since and searched the net to find answers, but it seems I'm the only one afflicted.

  I would appreciate if someone can shed some light on this.

  Thank you

  I ran scandisk and check sfc, but that did not help. Instead of trying a system restore, I tried the opposite: installed at every possible update available.
  Result: Problem solved!

  I installed 14 updates:
  KB974306
  KB976325
  KB905866
  KB943729
  KB960362
  KB969058
  KB971512
  KB971514
  KB972036
  KB975364
  KB976470
  KB933713
  KB971513
  and Windows Internet Explorer 8

• Unable to connect using the current password

  Using the current password which only had 6 characters - have now changed to 8 hope if this helps solve the problem.
  Have you noticed too there was an update of Mozilla on my laptop the day before that this problem then this could be the reason?

  Unable to connect using the current password

  It is far from a complete problem description.
  Please explain in detail

  • what you were doing
  • That's happened

  Using the current password which only had 6 characters

  6 characters is a very weak password. Consider using a password manager to generate longer and more complex passwords and to remember these passwords.

• Write delay failed unable to save all the data for the file $Mft

  Have a frustrating problem.  Help is greatly appreciated.  Learned the hard way and lost a dwg important issue which was unrecoverable.  Bought a new drive external hard seagate.  Could not back up the entire system with software pre-installed.  Download acronis true image home 2011.  Tried to backup system.  Receive error when trying to backup messages; 'Delay to failure of Scripture; Reading of the sector; Windows was unable to save all the data for the file $Mft. The data has been lost.  Have tried many fixes.  Unable to disable write caching method (grayed out / unclickable).  Played regedit 'EnableOplocks' is not listed to select.  Attempted to run microsoft 'fix it' and got the blue screen of death.  Short hair out of my head.  Suggestions appreciated.

  I don't know where Microsoft 'Technical support engineers' get their information.

  Write caching without a doubt "does apply to external hard drives", but it is usually disabled to prevent to sort the problem you are experiencing.

  I've seen several positions reporting to the same question that you do.  All of these positions were with SATA drives.  Is your Seagate eSATA drive?

  The disc is recognized as an external drive in Device Manager?  In Device Manager, go to the drive properties dialog box and click the policies tab.  An external drive should have two options: "Optimize for quick removal" and "Optimize for performance".  An internal hard drive shows the options as gray (with 'performance' selected), but there should also be a checkbox "Enable disk write cache" under the second option.

  What shows in your policies tab?

  If I understand correctly, "writeback" or "write behind" is implemented by disc material or its pilot.  If the option is not available on the drive properties > policies tab, I would suggest to contact Seagate support.

• After changing the orainventory place im unable to connect using the oracle user

  Hello

  IM using oracle 12 c on rhel 6 after correctly installing the software, I changed the location of oravinventory in/data/houses

  / u01/app/Oracle

  After making these changes im is no longer able to connect using the oracle user...

  also I back return changes I had made to the orainventory folder still unable to connect using the oracle user...

  any help on this would be greatly appreciated

  Sadia. wrote:

  Hello

  IM using oracle 12 c on rhel 6 after correctly installing the software, I changed the location of oravinventory in/data/houses

  / u01/app/Oracle

  After making these changes im is no longer able to connect using the oracle user...

  also I back return changes I had made to the orainventory folder still unable to connect using the oracle user...

  any help on this would be greatly appreciated

  Newer versions of oracle have implemented a great new technology to help solve problems, called "error messages."  Unfortunately, I can't find any reference to an error message named 'is no longer able to connect.

  And why you are moving your site from inventory?  When you have installed oracle, he put the inventory where he wanted.  There is no reason to try to change or replace.

• Streaming mp3 using the Audio tag does not work in the app, while working in the browser

  Hello

  I fight with this problem on the second day and still can not get it to work.

  I'm on Soundcloud mp3 streaming and all works in Wellington and the browser on the device, he refuses to work in the application.

  -Do you have someone at - it had the similar problem?

  -Have you had a chance to make the streaming solution work in app?

  -It could be cause by the fact that Soundcloud uses a 302 redirect to a temporary URL?

  Thanks in advance

  I think that the redirect can be a problem. It works if you choose a url that links directly to a stream for example

  http://AUDIO1.ideastream.org/wcpn64

  Have you tried? I used the audio tag to read feeds with success on OS6 and OS7. On OS6 was a problem of the CBC, but the original CBC played yet.

• Is it possible to use the audio jack as input?

  I was wondering if any of you know if it is possible to use the audio input jack on the BB10 devices as input source?

  Yes, it is, in fact, that BlackBerry has blogged about it!

  http://devBlog.BlackBerry.com/2013/07/beep-Beeep-beeeeeeep-and-spandex/

  and there code ready for you (from the blog article) on Github!

  https://github.com/BlackBerry/Cascades-community-samples/tree/master/AudioAccessory

• When I use the internet online - all written or missing words in my LCD

  Original title: Please help me

  I had a problem with my computer... When I use the internet online... all written or missing words in my lcd screen... I already check that the computer with the antivirus software, but has not detected a virus in the computer... what should I do?

  Windows 7 ultimate 64-bit

  Hello

  1. What is the brand and model of the computer?

  2. what anti-virus software have you tried checking the virus?

  3 have there been any changes made on the computer before the show?

  4. where exactly you are missing words?

  Even if you have used a virus protection software, try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the problem is not resolved, please provide more information to help you best.

  I suggest also refer to the link and post a screenshot:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

• It may be, or not to use the products online?

  It may be, or not to use the products online? Do not install on my PC?

  cc Adobe programs are installed on your computer.  You must "online registration" once every 30 to 91 days to continue using them.

  If you encounter a problem, please explain.

• How to disable the measures when using the tool online

  Hello.  I'm sorry of you problems with this little thing but its driving me nuts.  I use a shared computer in a University, and we went just to CS6.  When I use the tool online by making a mask a box pops up that measures the length of the line and the angle.  I want to turn it off, and it blocks to be able to see what I'm trying to hide.  I tried this to research online and in using Photoshop, but I don't know the correct terminology, i.e. what to call to find out how to turn it off.  Thanks much for any help!

  Here is a jpg screenshot: https://www.dropbox.com/s/njena5x9ppajzqq/linetool.jpg

  It sounds like the poster in the image that have been added to photoshop cs6

  You should be able to turn off Photoshop > Preferences > Interface > display Transformation values and never the value set.