Satellite P300 - 219 PSPCCE - what should be the optimal heat of CPU?

Similar Questions

• Satellite P300 - 20 H - what should I do after HARD drive recovery?

  Hello

  I just picked up my Satellite P300 - 20 H, using HARD drive recovery,

  Any ideas as to what I should do now? Laptop backed up, HDD Recovery wiped and returned the laptop to factory default. What should I do now? I never wiped a laptop or a PC before. I did the restore via the HARD disk and all came back when I got the laptop almost 2 years ago but now I have 108 updates to windows, and my Toshiba Tempro does not work.
  I have to update all the drivers on the laptop and if so, how do I know what needs to be updated and how can I do this?

  I went to the Toshiba site and he gave me a list of the drivers available for my particular model but I am not sure how much of these driver updates, I need to actually download and update.

  If someone could help me it would be really appreciated.
  I would be delighted if someone could just explain to me, because I don't know anything about pc / laptop and just want my laptop back to power. So that everything works correctly. I read in the section of the conductors, on toshiba.com that not all windows service packs must be downloaded not all work along the coast Toshiba laptops. So im stuck if I have to download and install updates Windows 108 that are required to be installed also.

  Hope someone can help out me.

  Thanks in advance.

  Hey,.

  I m wondering about your question: it seems that you have made the recovery of HARD drive but you didn t know what HDD recovery not right?
  As you have noticed, it will restore your computer back to factory settings. You have the same settings that you have purchased. It is therefore useful if Windows doesn t start more or you want to reinstall Windows.

  You can use your laptop as before: there is no difference. All Windows updates should be installed, that's very important because they are security updates day and you help protect your computer. So, start Windows updates and follow the installation.

  Site Web de Toshiba driver updates aren't important, only when you notice problems. If this isn't the case, you can forget the driver updates. ;)
  ?

• Satellite P300 - 1DT PSPCCE - how to change the keyboard

  Hello

  I am looking for documentation of disassembly for my laptop.
  I need to change the keyboard. I have 2 letters that are broken.

  Thanks a lot

  Clickservce

  Hello

  Disassembly guides are not for the public, you can download the manual on the official website of Toshiba. I've never seen there other documentation.

  In any case, exchange of keyboard should not be complicated. Just remove the keyboard between the speakers and the keyboard stand. After that, you can lift the keyboard itself but be careful with the keyboard under the keyboard cable. You must remove it also.

  Good luck! :)

• Satellite P300 - 1GI (PSPCCE) what happens with Vista after installing Win 7?

  Hello

  I intend to install windows 7 on my laptop, but want to know what is happening with my windows Vista, I'm running. I already made the recovery of the DVD but are they enough reinstal windows Vista after installing windows 7? or wat can I do so that this is possible?

  (I'm sorry for my bad English, I am from the Netherlands)

  Thank you
  Futience

  Hello

  The recovery disk allows you to reinstall Vista and all the Toshiba drivers and tools.
  Don t be afraid to install Win 7.
  If something goes wrong, you will be able to retrieve the laptop using the recovery disk. This will outline the laptop back to factory settings

  See you soon

• Satellite P300-1BB (PSPCCE) - good software for the FN key features needed

  Hello

  I upgraded my laptop for Windows7 64 bit and now I need the OSD software that appears by pressing the FN button. Unfortunately, I was not able to find it in the downloads section.

  Thanks, Gerd

  You need to download and install is Toshiba Value added Package.
  This package contains several tools and utilities, and one of them is supported cards Flash Utility.

  Toshiba VAP can be downloaded from here.

  Check it out.

• Satellite P300-1EI (PSPCCE) - how to upgrade the BIOS?

  Hello everyone,

  I want to update my BIOS and I am running Windows 7 32 bit. On the Toshiba site, I found this update: of the bios-20090226125740.
  It's the good update?

  How could I do to update Windows (I have no floppy).

  Thanks for your reply.

  Hi banditito,

  The first important question is: BIOS update is really necessary?
  I mean if you notice any problems with your laptop I n t see a reason to update. This update is a bit risky if never touch a system! ;)

  In addition, the update is designed for Windows and you don't need a floppy drive!
  Extract all files from the archive zip and start the update. But before this, close all programs running (also, AntiVirus and firewall), disconnect from the Internet and then start the update.

• No more support for Satellite P300-219

  Hello there;

  I just bought this new laptop: Toshiba Satellite P300-219 last weekend.

  Purchased on the day, I properly checked for new updates of pilot entering serial number into the homepage of support and by Toshiba detection tool and also by selecting the model manually from the list.

  However now none of this work methods. When I enter my series model in the homepage of laptop support I get this message "sorry your product could not be found" and when I run Toshiba detection tool, my browser redirects me to a page that tells me the same above. And when I try to find my model of laptop computer manually from the list, I am shocked to see that my laptop model is not yet displayed in the list.

  So, what's going on here? Toshiba just decided not to support my laptop newly bought? Or is the support page has some technical problems right now? Is there anyone out there live similar things?

  Oh, incidentally excuse my English, I'm not a native speaker...

  Edit: OK, I managed to find my laptop model in the list support page, but not in the support of the EU page which I use before but in Turkish support page, but that did not help either since I was redirected to a blank page: http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?LNG=25&service=SE

  Edit 2: Support Page everything just great, Turkish is not even that list more...

  All the things you need you can find it on the download directly under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp page

  Just make sure you choose Satellite P200 PSPCCE.
  All that s.

• What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  I have a PCI 6519 data acquisition card. I want to install it on the PC and use it outputs to control a robot. I have problems with the connections to the terminal block which is attached to the cable.

  What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  
  

• Windows media player cannot read the particular mp3 file while other mp3 file can. What should b the reason?

  Windows media player, it is impossible to read the downloaded particular Internet as mp3 file ' save link as. / target as ' while some other mp3 file can b played. What should b the reason?

  Hi Manjit L,.

  I see that you are unable to read a particular mp3 file in windows media player. I'll help you with this problem.

  1. have you made changes on the computer recently?

  2. what security software is installed on the computer?

  3. do you get an error message trying to read that particular file in media player?

  I suggest you to refer to this article and check if that helps.

  Windows Media Player Invalid File Format Error Message: http://support.microsoft.com/kb/234019

  Refer.

  Windows Media Player: http://windows.microsoft.com/en-US/windows/media-player-help#media-player-help=windows-7&v2h=win7tab1&v4h=winxptab1

  I hope this helps.

• What should be the perfect setting to convert the VM model CLI?

  Hello team,

  I tried to convert the model of a virtual machine using the vim - cmd vmsvc/convert.toTemplate 1

  
  

  And I am facing this error:

  
  

  {(vmodl.fault.NotSupported)

  faultCause = (vmodl. NULL in MethodFault),

  MSG = "received error [< p:1f2aea80, TCP:localhost:80 cs >] SOAP response: markAsTemplate.

  The mode is not supported on the object. »

  }

  
  Therefore, it is supported in ESXi 6.0? If so, then what should be the correct configuration?

  Thank you

  Christophe

  You need a vCenter server used with models... vCenter can then be managed using PowerCLI.

  / Rubeck

• Hello, I would like to know what the ideal audio levels (gain/normalize) levels should be for my project. It will be broadcast on television. I think that the gain should be set to-12? But I'm not sure what should be the vertices. Thank you!

  Hello, I would like to know what the ideal audio levels (gain/normalize) levels should be for my project. It will be broadcast on television. I think that the gain should be set to-12? But I'm not sure what should be the vertices. Thank you!

  And look also at: Conform to broadcast standards, volume limits. Adobe Audition CC tutorials

• What should be the ESXi VM CPU settings on a server of type hyperthreading?

  What should be the CPU of VM VMware ESXi settings on a server of type hyperthreading?

  I have read the section of the hyper-threading http://www.VMware.com/PDF/Perf_Best_Practices_vSphere4.0.PDF .  He says:

  "Contrary to have twice more processor cores, which can
  about double performance - hyper-threading can provide anywhere from slight to significant
  increase in the performance of the system while keeping the pipeline of the most busy processor.

  He goes on to say:

  "An ESX system enabled for hyper-threading must behave almost exactly like the system without it. Logic
  processors on the same core had adjacent numbers of CPU, so CPU 0 and 1 are on the first core processors
  2 and 3 are on the second carrot and so on. »

  Logic:

  For VMware ESXi on hyper-threaded servers, what logically follows in my mind is:

  1. If a virtual machine requires the power of 2 hearts, I must specify 4 CPUs in the virtual machine settings.

  2. it is never effective not to assign any number of CPUS, which is not an even multiple of 2.  Thus, the minimum number of CPUs in the virtual machine settings must be 2.

  3 Server, in regard to the number of cores necessary to support the VMs system and planning remains the same for both hyperthreading and non-Hyperthreaded servers.  However, the hyper-threaded server deployment requires double the number of CPUS in the settings of the virtual machine to keep similar to a non-Hyperthreaded server performance and exploit the benefits of hyper-threading.

  4. when I ssh in the OS and see CPU 0, 1, 2, and 3, CPU 0 and 1 are the first kernel and CPU 2 and 3 are the second core.

  
  Question:

  This logic is correct?

  Logic:

  For VMware ESXi on hyper-threaded servers, what logically follows in my mind is:

  1. If a virtual machine requires the power of 2 hearts, I must specify 4 CPUs in the virtual machine settings.

  No, a vCPU get his plans for the base, either directly or when Hyperthreading is enabled (which makes the guest OS don't know, but ESX) via a logical processor generated by Hyperthreading. So if you want the client to use two hearts, assign two vCPU.

  2. it is never effective not to assign any number of CPUS, which is not an even multiple of 2.  Thus, the minimum number of CPUs in the virtual machine settings must be 2.

  The minimum number should be one vCPU. There is no guest without this vCPU. In fact, you should start with one vCPU when possible and increase the number when you have a good reason or really see a performance gain. This is because ESX must wait for the number of free kernels until it can plan the work of a SMP guest. So, if the client has two of vCPU he has two free cores. First, it must wait for these hearts to become free (which slows the guest) and then it occupies two hearts (which could slow down the other guests in function of the number of available cores). If Hyperthreading is enabled, ESX may plan the work faster, but always real treatment cannot be done by a physical core. For ESX 4 there are better SMP scheduling mechanisms, but these restrictions continue to apply generally. (http://communities.vmware.com/message/1692107#1692107)

  3 Server, in regard to the number of cores necessary to support the VMs system and planning remains the same for both hyperthreading and non-Hyperthreaded servers.

  Yes.

  However, the hyper-threaded server deployment requires double the number of CPUS in the settings of the virtual machine to keep similar to a non-Hyperthreaded server performance and exploit the benefits of hyper-threading.

  Lol Hyperthreading is either neutral, that it does not adversely affect the performance of the means or increase performance slightly due to faster programming (not treatment!).

  AWo

• What should be the shape of the model?

  What should be the shape of the model?
  
  Object library; who has inherited triggers commonly used?
  
  and?
  
  
  Kind regards
  
  Abdetu...

  If you look at the shape of the library of standard objects (OFGWEBOL.fmb), you will see that there is no code (with the exception of a few units of program). The OL is really meant to look kind of stuff.
  In addition, it is much easier to maintain code in a library of pll.

• What should be the address of the cluster in soa suite 11 g

  What should be the address of cluster if I managed server1 on a box and managed server 2 on the other urgent box.please let me know

  IF you have 2 servers managed on two boxes

  the cluster address would be

  hostnameoffirstmanagedserver:portofms1, hostnameoffsecondmanagedserver:portofms2

  It would work

• What should be the ideal size of SGA components?

  Hi master,
  
  We are using oracle 10G R2 on RHEL 4.7, I would like to know what should be the ideal size for components of the SGA, if my database size is 30 to 70 GB?
  
  We need to set manually? or if we fix SGA_TARGET then it's OK?
  
  Once again how much % should we specify SGA_TARGET if we * 8 Server CPU * with * 8 GB * of RAM?
  
  and of course the database size will increase in function close...
  
  
  
  
  
  
  
  
  any suggestion for it
  
  
  
  
  
  Thank you and best regards
  
  
  VD

  If you want to manually set the values for pools, then his new return to the same answer that is trial and error.

  For a well-written application (one that uses bind variables and has a minimal amount of literal SQL), a division of 40-60 of SGA should be well that is in the shared pool and other components 40-60% for the buffer cache, but I must add, YMMV.