Satellite P300 - 220 (PSPCCE) and express card FireWire

I have problems with an IRQ that is shared between the firewire (IEEE1394) and ati mobility radeon 4600. (the IRQ used by both devices is 16)
Sharing this make my firestudio presonus (external FireWire sound card) problems when playing music on my DAO.

I would buy an Express card for this problem, but I have to be sure that it won't be the same IRQ (16) than the other firewire connection.

If you use such a card please check wich IRQ is used when it is connected on the laptop.
You can see with Device Manager.

Thank you very much.

toskidus

Hello

The Windows operating system controls and assigns automaticity all remedies to all controllers!
In my case the SD host controller and the graphics card share the same IRQ 16 and there is NO conflict.
So I doubt that your problem is related to the same IRQ which is used by firewire and graphics card.

Sorry, but that's all I can suggest about your question

Tags: Toshiba

Similar Questions

  • Satellite P300-220: no microphone on webcam integrated on WINDOWS 8

    Hello
    I just migrated to WINDOWS 8 32-bit on my Satellite P300-220.

    Whatever it works perfectly except the microphone on my webcam integrated. The webcam itself works but not the microphone.

    Any idea?

    There are no drivers on the site of toshiba for WIN8 to Satellite P300-220

    Thanks for help

    TSB Rgrds

    There is no Win 8 to P300 driver because the Win 8 isn t taken in charge for this series.
    That's why some functions of the laptop may not properly work using win 8.

    However, please go to control panel-> Sound-> recording tab
    Click right on and mark options: see the disabled devices / Show disconnected devices

    What devices are listed in this tab check?

  • Satellite P300-220 - cannot run Recovery Disc Creator

    Hello

    Yesterday I received my new laptop (Satellite P300-220). Today, I'm trying to make a record of recovery and launch "Toshiba Recovery Disc Creator", the hourglass appears for 3 or 4 seconds but nothing else, cannot access the application.
    Any idea?

    Thank you

    Hello

    Do you have something to change on the laptop before you start the Toshiba Recovery disk?

    It's not easy to say which is the reason, but in your case I would start the recovery of HARD drive option. Go to the advanced boot menu, select fix my computer.

  • Satellite P300 - 219 PSPCCE - what should be the optimal heat of CPU?

    Hello there;

    I use for my laptop Satellite P300-219 (PSPCCE) newly bought about a week now. When you type I can't help noticing, the place where I put my left hand, I want to say the empty space to the left of the touchpad, feels much too hot. I looked for the manual and I have learned that it is where the CPU.

    Then I searched for a way to measure the heat of CPU, and after having tested some programs with too many different measures, I led to believe that the 'CPUID hardware Manager"gives the best results, after you set the correct value TJUNCTION.

    Here are the steps I get today while typing this message:

    ACPI hardware monitor
    Temperature 0 45note ° C (112 ° F) [0xC6E] (THRM)

    Intel Mobile Core 2 Duo T6400 hardware monitor
    Temperature 0 56a ° C (° F 132a) 0 x [31] (Core #0)
    Temperature 1 54a ° C (° F 129a) 0 x [33] (Core #1).

    Monitor hardware ATI Mobility Radeon HD 3650
    53A temperature 0 ° C (° F 127a) (GPU Core)

    Hardware Hitachi HTS543232L9S monitor
    Temperature 0 37â? Â ° C (98A? Â ° F) (0 x 25) (Assembly)

    From now you mind, windows taskbar indicates that I use roughly about 15 & 35% CPU. After a little use, I even though the CPU heats by a maximum of 69a ° C.

    The truth is, I don't know what to do with these readings, is my laptop which works very well, or he has problems? Could someone please tell me what should be the optimal level of heat for a P300, or where I can learn?

    Thanks in advance.

    Hello

    In my opinion, everything is ok with your laptop, buddy and the temperatures are quite good. Don t be to worry about this!
    If your laptop could overheat, it would have to close or freeze immediately. If this isn't the case, everything is ok with the temperatures.

    What you can do is to change the cooling method in Windows power management. Here, you change between performance and battery optimized cooling.

    By the way: you should also clean your laptop at any time. I clean my laptop every 3-4 months using a jet of compressed air. This blows the dust from the cooling fans.

    Welcome them

  • Satellite M40-237: Question about Express card slot

    My computer has a multiple media card on the side of my computer doing. On the left side, I have PC card and Express card slot location. I know how to use the multimedia card slot and pc. bBut card slot I have a problem with my Ekpress because I do not know how to open the slot...

    I hope that you will help me...

    Hello

    As you suggested on the left side of the laptop, you can find a PC card slot. This property sleeps on PC card (Type II 16 and 32-bit)
    Above this slot machine, you will find slot express card which allows you to install as additional express card.
    To install an Express card please
    1. Insert the Express card,
    2. press gently on a closed connection,.
    3 check the configuration in the window settings HW to make sure it's appropriate for you the card.

    This description you will find also in the Manual - Chapter 8
    Check it out.

  • Satellite P300-220 - yellow exclamation on the sound card

    Hello

    I just lowered my Satellite p300 to XP pro, but it seems to me that I now have some problems.

    -First of all, in Device Manager, I have a line "Audio device on Bus High Definition"with a yellow"?" and a «!» I installed the audio drivers and kb888111xpsp2.exe execution but that did not solve the problem, this line does not disappear.

    D ' other hand, when I click on "my computer > properties" it is written that I had 2, RAM 96Go, but normally I have 4 GB. Is this normal? I'm a little afraid to see it and not know what to do.

    Can someone help me?

    Thanks in advance.

    You must install Microsoft patches:
    -KB888111
    -KB835221

    But these fixes are also part of the SP3!

    In order to solve your problem, you need to remove the audio driver and the sound card in Device Manager. I then have to install SP3.
    After SP3 has been installed, you can reinstall the sound driver

    It is important that the pilot would be installed AFTER the SP3

  • Satellite P300-1EI (PSPCCE) - how to allocate more memory to the graphics card?

    Hello

    I have a laptop toshiba satellite P300 with this graphics card: ATI mobility radeon HD 3650.
    I want to allocate more memory for this graphics card. How could I do?

    I can't do this in my bios, I don't have this option...

    Another way?

    Hello

    Something like that is not possible because the graphics card driver it controls automatically.
    If the graphics card would need more graphics memory then the driver assigns the amount of necessary RAM automatically.

  • Satellite P300 - 1-9-10 SD card reader code

    Hi all

    I have a new Toshiba P300 - 1 9, good for six months, and have just for the first time I tried an SD card into the slot of the multimedia card digital.
    The card does not appear in 'my computer '. In Device Manager it shows with the yellow sign fault warning of a problem.
    Double click it gives this message "this device cannot start code 10" in the management of the disk of the card is not listed in the upper pane, but shows as a player in the lower pane without a drive letter assigned.

    If I try to assign a drive letter, I get a message saying that the operation failed because the disk management console view is not updated.
    He wants to refresh the view by using the refresh task. Which does nothing.

    I reinstalled the drivers for the SD card listed under disk drives when the card is in, storage controllers and generic volume on storage volumes. I've also updated the driver for SD host adapters.

    A card format made no difference. I know that the card reader is correct because a few days ago, I took an image updated with Acronis TI and then reinstalled the OS from the recovery media. The card worked fine then. I have now put the Acronis image and the map does not work. I had loads of driver updates on the road to Toshiba for various things (but not the card reader) through their service Tempro, including an update of the bios.
    I wonder if the bios update caused the problem. I'm debating whether the BIOS to the default setting.

    I have tried everything I can think and followed by a number of suggestions after googling the problem. The MS Knowledge Base was not very useful and many people seem to have the same problem. I am now at a total loss.

    Thank you

    cheven

    Any ideas would be welcome.

    Thank you.

    Hello

    The 10 error code means that the device cannot start.
    Card reader is not ready and is not running and therefore the SD card cannot be used and is not recognized in my computer.

    In most cases the update driver/relocation should help sort put them this question.
    Satellite P300 - 1 9 belongs to the PSPCCE series.

    The European driver Toshiba page provides the controller driver of card reader for this model of laptop. This is the driver that controls the SD card.

    I recommend that you download this driver. Access the Device Manager, and then uninstall the previous driver. Reboot the laptop.
    After restarting again the OS must find a new device and should request the necessary driver.
    Then you must point to the driver that you downloaded and should complete the installation.

    Usually, this should solve your problem.

  • Satellite P300-23F-mini-PCI Wireless card Replace?

    Question: would it be possible to replace the card of wireless mini-PCI Intel 5100AGN with version 4965AGN or 5300AGN?

    The thing is, recently I bought the Satellite P300-23F. Great laptop. Apart from one thing. I use the Intel 5100AGN wireless. Type of damage, the rest of the components used to build this laptop are high-end. I would have liked to see the 5300AGN of even the old 4965AGN adapter instead. These are both a bit more expensive, but still on the market for the price difference is a simple slice of $20. The 5100AGN TX is only 150 Mbit, which is half as fast as the two other Intel wireless modules. In general, a lot of people seem to have problems with the 5100AGN, seems to be a troublesome product altogether.

    Performance of the real world of the 5100AGN on a Linksys WRT54G is around 15 Mbps (1, 8 MB/s). My other computer laptop, equipped with a 4965AGN will be double that in the same circumstances. Tried all the drivers I could find, but the above values are the best I can get.

    Hello

    I think that this should be possible, but you must use Mini-PCI cards.
    The antenna WLan that is placed behind the screen provides two sons; black & white.
    A white cable normally goes to the HAND and a black to the auxiliary voltage

    Greetings

  • Re: Satellite P300 with Windows7 - wireless network card can not find my BT homehub

    After istalling Windows 7 on my Satellite P300 card wireless LAN Atheros can't find my bt homehub.
    I tried to change the channel on the hub and updated to update all drivers, but still no luck.

    Any ideas anyone?

    The wireless network card is properly activated?
    This BT hub is not known to me, but check settings WLAN hub and laptop and updated on both devices to run on the standard G only.

  • Satellite P300 - vertical red and white lines on the screen

    Hello

    Red and small white vertical lines ' pixels may 2 each) are appearing on almost all of my screen. Sometimes, if the background is grey or white (for example a box on a web page), the display is normal on this particular area and the lines are everywhere around. This is the second time that this has happened. The last time, it disappeared after a few days. My computer is a Satellite P300.

    What can I do?

    Thanks for your help.

    I understand this correctly?
    This problem appears on all screens: internal and 2 display attached external monitor?

    Well, in my opinion, this means that the graphics card may be affected. :(

  • Satellite P300 guard crashing and giving me blue screens

    Hello

    I got a Satellite P300, running on Windows Vista home premium and its provided with a card ATI Mobility Radeon HD 3650.
    My laptop crashes and send me windows and blue screens said that it is the cause of ls my graphics driver and the eror message is Atikmdag.
    I've tried everything (I think), I re - installed windows but what I had to do a restore with the current settings, because in some cd a little way my F8 function does not work so I couldn't restore my windows from my hard drive.
    I also had the latest Ati drivers, it does not help either, I also re-installed and tried to run my laptop on windows drivers, it doesn't help either.

    I don't really know what to do, can anyone help me please?

    Are you sure you're running video drivers downloaded from a site of Toshiba? Unfortunately the drivers may not be the root of the problem, so it is important to eliminate as the cause. How to remove AMD recommended driver is [http://support.amd.com/us/kbarticles/Pages/GPU57RemoveOldGraphicsDrivers.aspx] and if you follow that with an installation of drivers Toshiba, then your laptop must be in a State also provided

    I would recommend that you look at this [how to troubleshoot display driver stopped responding and has recovered, errors of type ATIKMDAG.sys | http://support.amd.com/us/kbarticles/Pages/737-27116RadeonSeries-ATIKMDAGhasstoppedrespondingerrormessages.aspx]

  • Satellite P300 - 18 M - use the card reader for Vista Ready Boost OK?

    Hello

    I have a P300 - 18M, and due to get a new phone, have a spare Micro SD 8 GB card.
    I put it in the card reader, and I currently use it for Ready Boost, even though I have 3 GB of RAM, there is certainly a performance gain...

    However, no one knows if this could endanger the card reader? (IE damage it in any way) to be used all the time?

    Thank you

    Jack

    Hmm. I wonder about the 8 GB card Micro SD.
    As far as I know and according to some details in the internet, Satellite P300 supports the microSD (with adapter) 512 MB to 4 GB.
    Usually the laptop card reader s should recognize either large 4 GB microSD cards.

    However I doubt it might affect the functionality of the card reader in the worst case that the 8 GB microSD card will not be recognized by the card reader

    See you soon

  • Satellite Pro L300 - 24L and VGA card update

    Hello world

    I just have a Satellite Pro L300 - 24L and want to update the VGA Intel 4500 M for a Nvidia Quadro 3D & CAD applications, possibly for the games now an then.
    Is this possible and what card can adapt to my L300 - 24L?

    I'm really a noob in laptop, so your advice will be welcome heart.
    Features: CPU T3400 - 4 GB 800 Mhz HARD drive - 250 GB - Vista Home Premium 64 bit

    Hello

    I want to say clearly that portable computers technology design is not the same as on the desktop and if you have a good experience with desktop computers, you'll know that upgrading the graphics cards is not so problematic, but on laptops, the situation is very different.

    Laptops design and construction doesn't allow such flexibility for upgrades, upgrading the graphics card is not possible.

  • Satellite P300-1CN - system and the BIOS does not start

    Hello!

    I have a problem with my laptop Toshiba Satellite P300-1CN. When I start my laptop does not start in Windows.
    When I tried to go to BIOS, doesn't let me do as well. I can see only the Toshiba logo. When I press F2 or F12 I received the message:

    + Enter in the configuration. Please wait + or
    + Entering the MultiBoot Menu. Please wait +.

    I tried + ESC +++ Power Buton + then + key + F1. I can see all the information:
    + Phoenix Bios 4.0 release 6.1 +.
    + Cpu = 1 processor detected, cores per processor = 2 +.
    + Intel Core 2duo T5800 @ 2.00 GHz +.
    + 3070 M RAM passed system +.
    + 2048 KB L2 Cache +.
    + Shadow system bios +.
    + Video Bios shaded +.
    + Fixed disk 0: Toshiba MK2552GSK +.
    + ATAPICD; ROM DVDRom... +.
    + Mouse initialized +.
    Press F2 to enter Setup or press F12 to enter MultiBoot Menu selection.

    but after the computer laptop just gel but the processor is still running.

    I removed the HARD drive and tried to put different the a (work laptop) - still does not
    I removed the memory and tried to put different the a (work laptop) - still no job

    I have no idea what it is causing the problem.
    I have this laptop over a period of 2 months.

    Thank you.

    > Looks like I have to make a phone call to the Toshiba Support Centre
    You must enter in Toshiba authorized service provider contact such as suggested by Luke above
    All the details can be found on the Toshiba page. (the path above will point you to the ASP database)

Maybe you are looking for