Satellite P300-220 - Radeon driver has been restarted on Windows 7

Similar Questions

• Re: Satellite P - CD/DVD drive has been disabled after installing itunes 8

  * Help *! After installing itunes 8 my CD/DVD/RW Drive has been disabled.

  It's already happened and I've restored by removing the upper filters and lower in the Vista registry but itunes then told me "the registry settings used by the iTunes for importing and burning CDs and DVDs are missing." and I can't seem to burn anything from itunes.

  There, nobody how to restore CD/DVD/RW drive and retain full use of itunes please?

  Have you tried reinstalling iTunes?
  Reinstall the old iTunes, restart the computer and clean using CCleaner. Then, you can install the latest version of iTunes.

  If it doesn't work try to remove upper and lower filters again. Maybe you should do this after you have reinstalled iTunes.

  Finally and above all, this might be useful for you:
  http://APS2.toshiba-tro.de/KB0/TSB84026P0000R01.htm

• Satellite P300-220: no microphone on webcam integrated on WINDOWS 8

  Hello
  I just migrated to WINDOWS 8 32-bit on my Satellite P300-220.

  Whatever it works perfectly except the microphone on my webcam integrated. The webcam itself works but not the microphone.

  Any idea?

  There are no drivers on the site of toshiba for WIN8 to Satellite P300-220

  Thanks for help

  TSB Rgrds

  There is no Win 8 to P300 driver because the Win 8 isn t taken in charge for this series.
  That's why some functions of the laptop may not properly work using win 8.

  However, please go to control panel-> Sound-> recording tab
  Click right on and mark options: see the disabled devices / Show disconnected devices

  What devices are listed in this tab check?

• Satellite P300-220 - gel in-game, or sometimes in windows

  Hi, I have a problem with my laptop for a few weeks.

  When I play a game, my laptop freezes after 10 minutes or more, sometimes I can play for hours. But when it freezes U must use the power button to stop it. Sometimes it restarts by itself, but it is rare. When it restarts, sometimes the screen stays black and I can't do a thing, then it's off again. I have to wait to be able to start again properly.

  I already check the memory with memtest and everything is clear, I also try a large number of drivers for video cards, but the results are always the same.

  After the first time I've had this gel I'm trying to install Windows 7 to see what happened and he left. I also try Windows XP also unsuccessfully.

  So I really need help because I can not find a solution.

  PS: Sorry for my English I'm french.

  Hello

  What display driver is installed now?
  Make sure that you use the latest Toshiba display driver.

  In addition, it would be interesting to know with the factory settings. The same error occurs if you install the laptop using the Toshiba Recovery disk?

  Also make sure that this dust isn't blocking the cooling fan. You can use the jet of compressed air to clean!

  In the worst cases, you will need to contact a service provider authorized-online hardware problem.

• Satellite Pro L300 - WiFi feature has been removed

  Hi, I'm not a technique very girlie, so bear with me please :_)

  Yesterday, I received Virginmedia modem & wireless router connected. The guy on the left until I'm online but when I tried, I found that my Satellite Pro L300 wireless function has been deleted. I tried to use the rescue disk, but I get an error message saying "ACPI ATK0100 Kernel Mode Driver' absent." I can't even connect to the internet with an ethernet cable & when I checked the Windows my laptop's side went from 3.1 to 1.0!

  Is that what I can do to correct this situation myself or should I leave in a repair shop?

  It is indeed very frustrating.
  All responses are warmly appreciated .x

  Boarder's right. At first check if the LAN and WLAN cards are installed properly.
  Go to control panel > system > on the left side, click on Device Manager and check the entries under network adapters.

  Please report the status.

• Satellite P300-220 - cannot run Recovery Disc Creator

  Hello

  Yesterday I received my new laptop (Satellite P300-220). Today, I'm trying to make a record of recovery and launch "Toshiba Recovery Disc Creator", the hourglass appears for 3 or 4 seconds but nothing else, cannot access the application.
  Any idea?

  Thank you

  Hello

  Do you have something to change on the laptop before you start the Toshiba Recovery disk?

  It's not easy to say which is the reason, but in your case I would start the recovery of HARD drive option. Go to the advanced boot menu, select fix my computer.

• My photoshop has been removed after that my computer has been restarted. How can I recover my photoshop.

  My photoshop has been removed after that my computer has been restarted. How can I recover my photoshop.

  You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• How can I know if an external drive has been used for Time Machine and what computer it came with too?

  How can I know if an external drive has been used for Time Machine and what computer it came with too?

  I have several laptops and iMacs. I spent the relocation of the year and only used the MacBook Pro.

  Now I'm trying to figure out which drive goes with which computer

  I connected just a disk seagate 1.5 t and the first thing he did was to ask if I wanted to use it as a Time Machine drive.

  (1) if it is the TM disk accompanying this computer don't would not it have just started upward automatically?

  (2) what happens if I would have said yes?

  (3) I don't even know if it's been activated for TM. Is there a way to tell? It may hold just for iMovie files and other programs associated with a computer from my past.

  All readers of backup Time Machine contains a folder named: Backups.backupdb. If you open this folder, you'll find another folder with the name of the computer that has been saved. If several computers have been saved on the same disk, you will have several folders.

• the internal HARD drive has been corrupted and I fails to make the back upward. need information.

  I've owned an HP Pavilion dm1-LQ862PA #UUF, used to be windows 7-64 bit. the internal hard drive has been corrupted and recommended to replace another. they were asking for the backup cd and I failed to do, and I do not regret it. Well, except to lose all my files and programs that I installed, it will also include bluetooth, wi - fi and other important built in programs? I'm not a computer expert. If ever these important programs had totally disappeared, how retrieve it? my laptop in an HP authorized service center will be probably expensive and I decided to buy a new HARD drive and ask someone to put it in and install a new OS. Please help thanks

  Hello:

  There is a support for your PC page where all the software drivers to run the hardware on your PC such as bluetooth and wireless can be reinstalled.

  http://h10025.www1.HP.com/ewfrf/WC/product?product=5079502 & CC = US & DLC = in & LC = on & query = LQ862PA & Tool=.

  What I don't see is the availability of recovery disks to reinstall the operating system (windows 7 64-bit) or your PC programs (other than those listed in the link of support above).

  This means that if you want to replace the hard drive, you must make your own W7 64-bit installation media and use the 7 product key of Microsoft windows on the bottom of your PC to activate the installation.

  That assumes you can read all 25 characters of the product key windows 7.

  Here's how...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  The replacement hard drive should be a 320 GB SATA II 5 400 rpm Disk If you want the same specification provided with your PC hard drive.

  Please refer to Chapter 4 of the service manual on the link below for the procedures for removal and replacement of the hard disk.

  http://h10032.www1.HP.com/CTG/manual/c02666702.PDF

• CDDVD drive has been disabled by mistake how can this be corrected?

  CDDVD drive has been disabled by mistake, how do I fix the problem?

  CDDVD drive has been disabled by mistake, how do I fix the problem?

  ===================================
  Might be interesting to try to do a system restore to
  an hour before the drive has been disabled.

  See the following article:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  And... the following link might be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

• System Restore error: "the changes to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»

  I had some problems with my computer recently I knew could be solved with the system restore.  Then I went into system restore and went to a restore point that was a few weeks back.  After I clicked on it and pressing the ok button, the following message appeared: "the changes made to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»  I let it continue and do the restore.  My computer has rebooted and came up with an error in system restore that says restore failed.  It's the same thing with other restore points.  I don't know why I get this error because I not made any changes to this hard drive except for copy of a document word on him.  I thought that the System Restore monitors removable disks.  Anyone know what is happening here and how I can get the restoration of the system to operate without the mistakes to come?

  I have Norton.  Disable the Tamper Protection works.  I also noticed that since the G: drive was a portable hard drive, System Restore wanted to exercise oversight.  He wants to monitor all hard drives.  Turn on external and portable hard disks prevents tracking system restore changes to the readers.  I don't think anyone would have the system restore review external drives anyway.  It is not necessary.

• HP Recovery Kit will re - install Vista if hard drive has been replaced?

  Hello everyone, this is my first post so I hope that I understand.

  I bought a HP Pavilion s3050uk of second hand compact office, product number RY930AA.

  The only OS on it is a trial version of Windows 7 Ultimate, little time to expire.  I knew when I bought but I was just able to reinstall Vista Home Premium using the HP Recovery Kit and the number of product key from the COA on the PC sticker.

  However, I think now that the HARD drive has been replaced at some point - my machine has a 200 GB (Seagate ST3200822AS ATA) and I think that these machines haven't shipped with a 250 GB?  Now, I'm worried that I will pass on the recovery kit but it won't reinstall Vista because the hardware has been changed.  If it is probably the case of others has experience then I may as well save my money (which is very tight at the moment, where the 2nd hand PC) and put it toward the purchase of an operating system package full.

  Hope someone is able to advise me.

  Thank you

  Stephen

  If you buy a defined recovery disk and perform a factory original operating system image recovery and the partition scheme will be installed on the new hard drive.

  Certificate of authenticity (w\ license key) Microsoft Windows OEM is always visible on the bottom of the laptop?

• Dell XPS 410 HARD drive has been reformatted accidentally.

  HARD drive has been reformatted accidentally. I'm not interested in the stored data, I want to just go back to the factory settings.  Operating system is Vista.

  Thanks for any advice.

  You will need the recovery media you do when you received the system - attach the flash drive or insert the first disk in the backup media, power and press F12.  Start since the media and follow the prompts to reload the factory software image.

  If you do not prepare a media defined in advance, you will need to contact the customer service Dell to buy a game now - they are in fact not able to provide Windows Vista at this stage.

• My hard drive has been corrupted and I had to format and reload windows 7. It has worked OK for 6 weeks, but now says it is a counterfeit copy

  My hard drive has been corrupted and I had to format and reload windows 7. It worked OK for 6 weeks, but now says it is a counterfeit copy. I used the original product key, when I rebooted it. Ideas?

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.

  I am trying to set up a window to the top-

  -follow the instructions of top to select a backup disk - I did
  -Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.
  -in the past, this disc has been used ONLY as a backup disk
  -When you try to check (after Windows links) a message tells me the drive cannot be checked while it works - I have no problem with understanding that.
  -I wonder so I wish "disassemble this first volume" - "... all handles opened to this volume will become invalid..."
  -Do not understand what was required - and having no idea of the consequences (the disc 'way up', and what happens to the invalidated handles?) I replied "Cancel".
  -l' screen after you ask then if I want to check for errors at the next startup of my computer - I clicked on the button "schedule disk check.
  -When I started my computer nothing happened - what happened to "schedule disk check? How can I check the disc when firstly, it seems to be 'in service', but is only a backup to disk, and I thought that it only came into use when the reverse began to run?
  (I also tried to leave a message on one of the FAQ pages on back ups, but it appears that the number of characters is set to limit so low that you can't describe why the FAQ response is considered to be "not useful"
   
   
  Original title: Back Up system - disk and check

  Since this is a secondary drive chkdsk/r can be run without having to reboot.   Close all the programs that can access training and and when you run chkdsk say yes to "remove this volume first...". ».  This will cause no harm.  Although not strictly necessary, I recommend you to reboot once completed the disk check.   This will solve any problem related to the file handles.
  If chkdsk/r reports bad sectors, you should replace the disk.