Satellite P300-23V - marker is suddenly jump

Similar Questions

• How to turn on the lights on a Satellite P300-23V + user guide on CD

  I wonder how you turn on the light a SATELLITE P300-23V?
  I mean the light that show a bar above the touchpad and and the name of the Satellite is too bright.
  In the manual it says how to do it with the slim remote control, but it's not on this model.
  I know I could turn on the light with a combination of keys before, but now I can't find it now.
  I updated to Vista 32 bit to Windows 7 64 bit and maybe some features of Thoshiba was lost what to do?

  I also lost my CD with the most extended usage guide. I searched the download area, but it doesn't seem to be here for download.
  All Tips how to get it?

  with the remote?
  Go to BIOS settings and in advanced option there should be an option for lighting.
  Please try it and tell me if it works for you.

  S user manual download go to support portal under http://eu.computers.toshiba-europe.com/innovation/generic/SUPPORT_PORTAL/ and scroll down to download. You will find the option for manual Toshiba of the user.

• Satellite P300: cursor jumps to different positions while typing

  Hi all

  I have a Satellite P300
  I have problems when I type.

  When I type using the keyboard, the first two words are ok, but then the words started typing in the wrong place, for example more away in the middle of the sentence, I type.

  Anyone please help? Thank you

  Hi dude

  I had a similar problem.
  By typing the cursor is everything at different positions, and I wasn't able to finish a sentence.

  I though that there could be something wrong with the keyboard, but finally I have opinions that I touched the surface of touchpad accidentally while typing?
  I disabled the touch pad using the fn + F9 and questions went

  So maybe it of the same reason for you

• LED power button problem FIXED on Satellite P300

  Toshiba
  LED power button fix

  Toshiba
  Satellite P300-h-13

  By Thom
  Wijtenburg

  First of all, I would like to
  say you that I came up with this correction, after a clean reinstall of the
  Vista. (I used the serial number of windows on the bottom of my laptop for)
  install, so it's the same license as the OEM of windows and therefore
  Tout_a_fait legal.) After the clean install and installation of all the
  the drivers listed on the site of toshiba LED power button (also
  known as the mute button) and the CDDVD butten (mediaplayer button)
  stopped working. After browsing around forums toshiba I found
  this case, I removed the support button utility that the mute button has acted as
  a mute button. Also the mediaplayer button worked fine. Reinstalled
  the utility support for the button and they have stopped working. After many
  toshiba calls (I think about 5-6 in one day) they opened a
  support ticket for me, because they (team support callcenter)
  could not find a solution. Following their advice, I did the
  next to try to make it work:

  * Don't have a system restore with the restore DVD.
  * Do you have an another clean install.
  * Install the drivers in various ways (alphabetically reversed by alphabetical order and order of collection DVD).
  * update my BIOS.
  * downloaded a 'new' version of value added package (which was the same thing I already had).
  * installed the VAP with and without technical support button utility, no changes.
  After doing everything
  This, they said that they did not know the cause of my problem (at the beginning
  they thought it was hardware related). They came with a possible
  anwer:

  "It is."
  possible that we removed some features of windows vista
  operating system so that our one utility for device drivers
  work. In addition, we do support the configuration, that we delivered
  When you bought the laptop. »

  Now of course, I have
  understand that. I waited allmost a week, no response. Neither
  by electronic mail, or by phone, so I decided to google more
  on the problem.

  After a certain
  some research on Toshiba forum and Googling I came across
  a thread that sayd I must first install the utility 'control '.
  and the button press. Unfortunately what it did not work.

  Then, all of a sudden
  Windows displays a message saying that I should install the TOSHIBA.
  "ACPI-based value-added general use and logical device driver.
  I clicked on the provided download link, and the VFR package was a newer version
  version of the support page for my laptop which is held. So I downloaded
  This PPV version 1.17 and installed it. After a reboot, the buttons
  still did not work. But at least I got the file HWSetup.exe, where I
  could turn the LED off. Look into the button holder utility, I have
  saw that there where buttons like "Toshiba Assist" which my
  the laptop model is not.

  Navigation
  through the toshiba forum I found a file named ButtonSettings.ini, in
  which I can manually configure special keys. After a google
  search on the name of the file, I found that all the buttons list
  in a registry key. I saw the "Dimmer" file using the button
  folder and clicked on it. Poof... lights went out. Click again,
  Poof... lights turn it back on. So I replaced the wrong button definitions
  with CDDVD and dimmer values. Saved my changes but is not a restart.
  Opens the support button utility and change the path of
  MediaPlayer (who was always there to a previous definition) to
  Dimmer.exe. checked to see if the button CDDVD pointed
  MediaPlayer and restarted. When everything has been started, I pushed on the
  button again and presto... MUTE lights off. Pushed again, poof...
  lights. Pressed the mediaplayer button and started to mediaplyer. I have
  has been very happy when everything worked.
  Now that you
  know the story, here's the fix.

  * Difficulty: *.
  * Download and install the new VAP from here: [http://cdgenp01.csd.toshiba.com/content/support/downloads/util_tvap_26084A.exe]
  * Choose Edit in the installation and make sure that everything is checked
  * do NOT restart after the installation.
  * Download the ini fix and the fixed registry
  * Uncompress its contents into your working folder.
  * Copy the ini into C:\Program Files\TOSHIBA\TBS (where C: is the drive of program files)
  * In this same folder, start the exe called TBSbtnSt.exe
  * do NOT restart, click on 'no' in the dialog box.
  * Double click on the registry key, and then click 'Yes' to add to the registry
  * Then open the button support utility by clicking Start-> Toshiba-> utilities-> Toshiba assist. Help go to optimilization and click support button tohiba
  * If the path or the description is disabled, fix, and then click Save. See also if the CD/DVD mediaplayer points.
  * Restart you computer now.
  * If everything is is well past your special buttons should work.

  * WARNING: *.

  It worked for
  me, with my Toshiba Satellite P300-h-13, edition windows Home premium 32-bit.
  It should work on any model of 6 buttons with the mediaplayer and the mute
  buttons. I am in no way responsible for any damage that may arise
  If the fix does not work correctly. There is absolutely no. GARUENTEE
  It will work for you. If the answer is Yes, he does, and if it's not it
  doesn't work.

  * Author: *.

  I came
  With this fix by myself, without any help from toshiba support. I am
  the original author of this text. This document is for information
  purposes and should not be modified in any way.

  This page is
  also hosted on my Web site for documentation purposes. I have
  contacted toshiba support on my support ticket and has asked to
  Cancel and read this. I have also explained in the world.

  Wow, that's really cool! I think that a lot of users here would appreciate this extraordinary well documented fix.

  Thanks dude. :)

  Welcome them

• FN key does not work on my Satellite P300-1 c 8

  Hello

  I recently tried to reduce the brightness of my screen, bur after pressing the FN key, no icons - no option appeared. I tried the system restore; did not help.
  Looked at control panel - Toshiba help, clicked on the "accessibility" icon (because there are image FN on it) and has shown the error message: "this system cannot use Toshiba Accessibility.

  I wonder why it should not all of a sudden. I looked for a relevant software or a driver on the Support from Toshiba web page; without success. Please help me solve the problem. I got Toshiba Satellite P300-1 c 8, windows Vista 32-bit. Thank you.

  Hello

  Check please if the Flash cards feature is disabled in the settings of Flash Cards.
  You can find under the menu START > all programs > Toshiba > utilities.

  If it will not let me know. There are other radical method that should help you. ;)

• Satellite P300-150 - cannot use a USB

  Hello

  I have a satellite p300-150 with Windows XP PRO SP2 and I can't use any USB key (I can't open) but I can use e.g. USB mouse.

  Thank you
  Fotis

  Hello!

  You can format the USB on the laptop, and you can see it in disk management?
  Do you have the yellow marks in Device Manager?

  This shouldn't be a problem with the USB ports, I think that the USB have some errors.

  Good bye

• Satellite P300-1FY - BSOD right video driver problem

  Hello

  I bought this laptop a month ago to replace my old who crashed without possibility of repair and I had problems with the video drivers since then. I hoped that the problem would resolve since I am in the middle of my exams and I really have time too much more time to spend to fix it myself, and I also can not him go to the store because I need some software for my exams.

  So the problem that in my view, lies in the video drivers for the graphics card ATI Mobility Radeon HD 3470. While I'm working on my laptop my screen all of a sudden turns black and my computer crashes (including the very unpleasant noise when I play music at the time) after 5 seconds it flashes live and displays a message indicating that a beelschermstuurprogramma niet Super perfect en is naked herstela. In English, it would be something like s video drivers did not work properly and have now been repaired.

  It is of course extremely irritating, but it became even more then a few weeks previously when I had a blue screen because of a similar error. What make me lose half an hour of work on my laptop. (and as someone who has had reviews knows, half an hour is not something you can always afford to lose) I ran the wizard, and he sent me to the ATI site to look for the drivers.
  The downside is that I could find many drivers, but none for the 3400 series. After an internet search for awhile I finally found some drivers for these series (or they pretend to be), however, this installer was corrupted. I also searched the Toshiba site, but I did find what I was looking for.

  The laptop also freezes from time to time without the screen turning black.

  Could someone help me with this problem?

  Louis-Philippe

  P.S.: quality of the keyboard is really bad also

  First of all, you should post the exact code of BSOD and what operating system you are using. Then, we can search for this problem and what is the reason for this on the Microsoft Knowledge Base.
  Then please send the BSOD code.

  In addition, I put t understand why you can t find a driver on the Toshiba site. Satellite P300-1FY belongs to the PSPCCE series and so I can find a display driver for XP and Vista. So where is the problem? Maybe you should try to install this driver:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  But before you install the driver, remove the old driver first. Reboot the laptop and clean your system with CCleaner. Restart the computer and then install the latest version on the Toshiba site.

  The display driver on the factory site Internet (ATI) doesn't work because it s only for cards of office and not for laptops. Then, you can t install and your laptop has only been tested with drivers of Toshiba.

  If the new driver doesn't work, you should try to update the BIOS too. You will find on the page of Toshiba.

  Good luck!!

• Intel Wifi 5100 found on Satellite P300-1DB

  Good afternoon!

  If anyone can, Please * HELP! *

  I just bought the Toshiba Satellite P300-1 dB, and from the moment I started, I had problems with my wireless internet connection.

  The Intel 5100 Wifi can not find the connectivity (when I know for sure that there is, because the other laptops work correctly) and
  "the error I get is" there is no network adapter/hardware installed and configured on this laptop.

  After re-booting the laptop for some time he suddenly showed that the network connectivity and I could go on the internet and everything works great.

  "The next everything was gone, no network connectivity, and is the reason why Windows is to give: there is no network adapter/hardware installed and configured on this laptop.

  I really tried everything, installation driver for Intel Wireless 5100, try to install the hardware for Intel Wireless 5100, but then it shows wireless Intel 5100 # 2 (which means # 1 is really on the laptop, but it is not found!) .

  I also tried the full restore, where to get Windows installed again, but nothing helps!

  So please if someone can, * HELP! *

  Brgds,
  Femke

  If you have the BIOS 1.80, I found a Bulletin on the Toshiba support:
  http://APS2.toshiba-tro.de/KB0/TSB8A02GW0000R01.htm

  So to do a downgrade to BIOS, and then the problem should be solved.

• Satellite P300 is not connecting to WiFi

  Hello.

  I registered just now.
  I am looking for counsel for my connection my laptop which is not fuctioning or receive any wireless network.

  I bought this unit 3 weeks with the model of Satellite P300.
  Last night, he couldn't connect to my WiFi o2.
  Contacted O2 customer service, they were amazing and useful that they told me that it is most likely my wireless laptop is defective.

  I'm not really a wizard in this matter but before this unit received a variety of wireless connection secure.
  So now it does not work more.

  Can someone give me a recommendation on this issue.
  Thank you.

  I will try to do a BIOS and driver update.
  These updates, you can find the Toshiba Europe site:

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Do you have the yellow marks in Device Manager?
  The laptop recognises a WLAN?

• Satellite P300-220: no microphone on webcam integrated on WINDOWS 8

  Hello
  I just migrated to WINDOWS 8 32-bit on my Satellite P300-220.

  Whatever it works perfectly except the microphone on my webcam integrated. The webcam itself works but not the microphone.

  Any idea?

  There are no drivers on the site of toshiba for WIN8 to Satellite P300-220

  Thanks for help

  TSB Rgrds

  There is no Win 8 to P300 driver because the Win 8 isn t taken in charge for this series.
  That's why some functions of the laptop may not properly work using win 8.

  However, please go to control panel-> Sound-> recording tab
  Click right on and mark options: see the disabled devices / Show disconnected devices

  What devices are listed in this tab check?

• Strange problem with the button "Enter" in Vista on Satellite P300-225

  A few weeks ago I don't remember exactly when, Windows Vista on my Satellite P300-225 began to spend an incorrect applications scancode when you press the Enter key. It always sends the scancode of key keyboard, even when I hit than the alphanumeric part of the keyboard. It was working properly some time ago, but suddenly, it just started acting like that. No remapping all keys.

  Since there are very few programs that Act different on these two keys, it has become quite an annoying problem.

  The strangest part of it, is that the problem seems to be somehow related to Windows Vista, as the keys are properly reported on Linux.

  If anyone has any idea, please let me know.

  > I'll give a try to uninstall the keyboard in SafeMode but.
  Please post the result.

• Sound on Satellite P300-156 problems

  I bought a Satellite P300-156 1 year, mainly because he looked good and had Dolby Sound Room. However, I discovered not long after the purchase that he had no Dolby installed - so I tried to download the new drivers on the Toshiba site. They worked and gave me the SmartAudio app to activate the Dolby Virtual Speaker and Headphone Dolby of Dolby Sound Room. -The volume varies, as someone who has a hold on the volume dial. Not only when songs get more coins, but even just when someone speaks.

  This is crazy - and very annoying - and disappointing given the speakers harmon/kardon give amazing clarity. 3 driver updates later - still the same problem. Heard about people with the new P500 have the same problem - please does anyone have a solution? I got the problem under Vista 32 bit and now the same thing under 7 64-bit. It's a Conexant driver.

  The problem does not occur under the headphones/external speakers.

  Thank you.

  Hello

  If I understand this problem, that happened after the driver installation, and after activating the Dolby Sound Room.

  In Control Panel-> Audio Smart-> Audio second tab management, you will find a few options.
  The mode clasic has been marked.

  Uncheck this box and go to the Multi flow modes and configure it.

  I m not very well what settings you need to enable or disable because I m not P300 owner, but you should play around with these options and try different settings.

• Photo graphic to blink and beep when light Satellite P300

  I hawe toshiba satellite p300 - 135 with 32-bit original installed Vista Home with cane when I bought the new laptop.

  After 2 years of use normal and all the working laptop suddenly start when turned on during the boot process, a strong sound signal without possibilities to mute or sound enthusiast make with sound pregnant control potenciometer, also when I run windows and normally use the video image on the start screen blincking (the video from the beginning of the video card will Flash on the LCD video output) and the windows begin to be useless for use normal.

  Help, please

  What we have already done:
  -not scanned everything with good antivirus AVIRA (doubt to be a virus problem) no virus found in memory or on disk
  -total complete reinstall from the DVD sistem beckup (when the laptop was buy new)
  -Battery and BIOS battery disconnected too long to carry out all the data of the memoryes (doubt to be a virus problem), after recoonection the bios battery and battery problem even begin to occure.
  Nothing helps

  I looked on the forums of thet is battery problem (defect battery) but no luck in the clear sollution or explanation.
  I don't usually buy new battery (if it is 100%, which is the source of the problem) becuse I would that my laptop works perfectly without battery also only be connected to 220 V adapter if its possible.

  Help, please

  In my opinion, this is not a battery problem.
  Have you noticed that if the laptop is connected to the power adapter only and if the battery is not connected to the laptop?
  If there is no difference then I would say that the question is not the battery problem.

  Maybe it of problem of graphics but did you try to update the display driver? \
  If this is not the case, try this!
  In addition, I would recommend checking the computer laptop and external monitor.
  If the same could not be visible on the screen internal and external monitor, the graphics card can be affected.

• Satellite P300-1GN: greenish tint in the upper left corner of the screen

  I recently bought a Satellite P300-1GN, best laptop, I have ever bought!

  I booted up one morning to find a greenish hue in the upper left corner of the screen, at first I thought it was a graphics issue, but after looking closely, saw there was a line of crack/straight lines in the screen itself.

  Fig 1: [http://onfinite.com/libraries/1506419/600.jpg] sorry for the bad quality, camera phone.

  Photo 2: [http://onfinite.com/libraries/1506420/600.jpg]

  Then I had a glance at the back of the laptop to see if there was marks, see if something had been abandoned or struck, but no indication of that.

  Now the crack grew, and instead of going down, it goes right through the screen :(

  Photo 3: [http://onfinite.com/libraries/1506421/600.jpg]

  Could anyone help as to what could be the cause, and if it is covered by the standard warranty 1 year?

  Hello!

  To be honest, I've never seen such a display problem, but for me it seems to be a malfunction of the internal display. Looks like the internal display is broken somehow

  I think that in this case you need professional assistance from an authorized service provider. Technicians can check the display and tell you how it happened I think.
  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite P300-27 t - Vista installation problem

  Hello

  I just got a satellite P300-27 t, which came with Vista Home and I wanted to install Vista Ultimate instead.
  He had 3 partition (labeled WinRE, Vista and data).

  Then I backed up everything (never even connected on this version of Vista Home never), deleted the first two partitions and has started to install Vista Ultimate, the beginning of the installation worked fine but it failed all of a sudden with this message:
  "Windows cannot update configuration to start the computer. Installation cannot continue. »

  An idea what is causing that and how do I get around?
  I must be missing something obvious here, but it can't know. Sorry if that's one of the questions that opens every time here, but I have not found my installation.

  Thank you very much in advance.

  David
  PS: I restore my pc now

  Post edited by: Enzo

  > I want to put my Vista CD in the drive, start with him and then install Vista
  The point is that you can do this without installing SATA drivers!
  Books supports the new SATA controller and the driver is not part of the operating system, and therefore you must first install it.
  You need the Intel storage Manger.
  Check out the Toshiba driver page!

  However, you can set the compatible SATA to AHCI mode and you can install Vista without driver SATA need.