Satellite P300 begins after the judgment

Similar Questions

• Satellite P300 freezing after more than 20 minutes

  Hello

  I hope someone can help.
  My satellite P300 laptop freezes when left for more than 20 minutes.
  This has been a problem since the purchase of the laptop 8 months ago.

  I have windows vista installed.

  When this happens I've pressed the button until the computer restarts, it gives me the option to start in safe mode.
  This can't be good for the laptop?
  Is there a way to solve this problem, as I turn the laptop off when ever I leave.

  See you soon

  Hello

  It's not easy to say what is the reason for this as it can be different things

  Maybe your laptop is overheating. You can hear the fan or get very hot? Maybe you should try to clean using compressed air stream. This could blow out the dust from the cooling fans.

  You said that you have installed Windows Vista on your laptop. Do you mean the factory settings or you have installed your own version of Windows?

  It could also be the RAM problem. You can check this with Memtest86. It is a diagnostic program for the RAM. You can download it from [www.memtest86.com]. It s freeware and easy to use (just to burn a bootable CD with the image and the start of it).

  Good luck and post your results after that.

• Satellite A10 dies after the power LED blink

  Hello

  I have a problem with the power supply of my Toshiba Satellite A10. Sometimes, after the computer sat for some time, I have a problem with the power. The "plugged power cable" - LED will start to blink and shortly after, the computer just dies.

  It can also have the time to go into a lower energy state before he does. When it happened once, it will most likely happen also when I restart the computer, but after a much shorter time. WXP won't even have time to start. If I stop to select the source of start-up, the problem will occur anyway, this isn't the software. It should also be noticed that when the computer is not turned off, the 'smart power' - is on correctly.

  I know that my battery is not very good. Completely loaded, the computer can run for maybe 3 minutes with only the battery. I know that I must have a battery connected, even if I use the power cable, but this occurs even when the mine problem. The battery would be pretty bad not even allow me to use the computer with a cable?

  It should be added, that sometimes I can use the computer for long periods of time without this problem to happen. I also have a problem with the battery not being not properly in physical contact with the pins of the computer, but this isn't the problem here, because I have the same problem with the battery removed and me holding the battery in place.

  Thank you for your help.

  Andreas

  Hello

  You description is very long and detailed and it of still not easy to say what's wrong.
  Usually, the DC-In witness lights up green when DC is provided FRO the AC current. If the output voltage of the adapter is abnormal or if power outages, this indicator flashes orange.

  So I think that is your AC adapter malfunctions or there is something wrong with the electronic power supply on the motherboard.

• Satellite P300 - problem after BIOS update

  Hello
  I have:
  Satellite P300-20 b
  PSPCCE-05J011RU
  I updated my BIOS with this update of the BIOS of your site (30/04/09, 3, 40 - WIN version)
  My problem is:
  Loading and relocation of attempt of Windows, the following error message is fixed:

  "Technical information:
  STOP: 0 * 0000007 B(0*F78DE524,0*C0000034, 0*00000000, 0*00000000)'

  So I can't respond to a portable computer HARD drive, the HARD drive is defined in the BIOS.
  Also I checked the HARD drive on the virus, it's pure against viruses.

  Could you help me to update the BIOS to a working condition.

  Hey Buddy,

  This stop code means you use a bad SATA controller driver. The installation of XP, to integrate the SATA driver for install XP. There is a lot of discussion on this issue here in the forum.

  For Intel chipset, you will need to download Intel Storage Manager of Toshiba's official site and follow the instructions here to reinstall Windows with the SATA drivers:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  Solution replacement follow the instructions posted by peterk_1. Setting IDE mode instead of AHCI in the BIOS will help too :)

• Satellite P300-156 - and the button Return give the same values

  Hello

  I have a satellite P300-156, and it has a numeric keypad.
  I have problems because the Enter key and the Return key give the same values. I believe that it is incorrect.
  Can anyone help.

  Key on the numeric keypad should give an input it does.
  the Enter key on the main keyboard should give a carriage return value, but it gives an input value.

  Usually this does not cause a problem, but with software like photo shop that makes the distinction between a carriage return and a hard fall it does not work.

  Can someone help me please

  Thank you

  Hello

  To my eyes the entry and return keys are the same keys that provides the same functionality.
  I really put t know why you believe that there is something not right

  By the way; Check if you are using the latest version of the BIOS!

• Satellite P300 - 18 M; The clean installation of Vista Ultimate failed

  Hello everyone,

  I recently bought a Toshiba Satellite P300 - 18M. Now, I want to install Vista Ultimate on a totally clean system. The installation runs, but at the final stage (end), which takes about 2 hours, the screen becomes black with just the mouse showing pointer. I sometimes triep to leave from one day to the next day, she who does not help.
  Anyone who has ever heard of this problem and knows how to solve? If all goes well...

  Greetings.

  Never heard of this issue, but it would be interesting to know if you can restore the laptop using the recovery disk Toshiba of origin.
  It work?

  By the way; Did you include the SATA drivers before starting the installation of Vista?

• Satellite P300 connected to the WiFi router, but no internet connection

  Help!

  I have a Satellite P300 installed with Windows Live Onecare... and a netgear Rangemax wireless router
  I have no idea as to overcome this problem... I just moved house and it worked just dandy in the old place

  Any suggestions would be greatly appreciated.

  Thank you

  Hello

  If everything worked correctly in your old House, then I guess there is no problem with the laptop but the router is simply not configured property or there is a problem with your ISP (internet service provider).

  Maybe you should get in contact with the ISP and need to check if the connection is ready and available!

  Welcome them

• Satellite P300 - problems with the buttons of enlightenment

  First of all, I would like to apologize for my bad English, I'm French actually.

  Hi, I bought a laptop Satellite P300, a couple of days, and already I have a problem with tactile keys (one on top of the keyboard).

  Actually, the only one of the left, which is supposed to turn off the sound used to keep away the keys lights and Satellite logo. One day (and I don't know why), when I pressed her, she actually cut the sound. And now, the first two keys (mute and shortcut of windows media) do not work, but the other four (Media Player control).
  I tried Toshiba Assist, and the tool for the configuration of the pushbuttons (I don't know the English name of this tool) but I couldn't set the keys, they were not on the list "button name".

  So, does anyone have an idea how to solve this problem?

  I apologize again for my English.

  Hello

  I assume you are using Windows Vista because you bought the laptop a couple of days and so I think that you should try to reinstall the Toshiba value added Package. This package determines the buttons of the lighting that you mean and others (for example the FN keys too).

  The latest version, you can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  1. download the latest PPV on the Toshiba site
  2. go in Control Panel > Add/Remove programs. Find the Toshiba value added package and remove it
  3. restart the laptop
  4. download and install CCleaner. This cool cleans up the registry of Windows and system files. He should find some registry keys of Toshiba you should remove with CCleaner.
  5 reboot the laptop
  6. install the PPV that you already downloaded
  7 restart once again

• Satellite P300 - I need the number of the part of the original screen

  Please can someone help?

  I need to get the part number for Toshiba for the original screen in my Satellite P300 - 20H. My laptop fell out of the bed and the only way I can use it with an external display
  all this is fine with the laptop, but it would be a great help if I could get the part number for the original 17 "WXGA + TruBrite.

  Please do not hesitate to any help you send an email: Email: [[email protected]]

  Thank you very much
  Welsh_Jam

  Hello

  The original Toshiba parts can be ordered from the Toshiba ASP.
  Guys could order to directly from Toshiba.

  I also found this page:
  http://www.screentekinc.com/Toshiba-laptops-LCD-screens.shtml

  You will find a display that are compatible with Toshiba laptops.

• Satellite A200 stops after the post

  Hello.

  I replaced the motherboard that was dead with a used one on ebay, the user declares that it functioned very well.

  Anyway after that I set up everything, it starts for a few seconds and then stops.
  Then I tried connecting the Council, except in the case of the laptop and it's the shutsdown, after awhile, except in certain positions, or if I press somewhere, then he has not stopped.

  I have reviewed everything carefully and I don't see any evidence of anything whatsoever that could short the motherboard...
  I took a few pictures for you to see how I managed to do work for a long time:

  http://I54.Tinypic.com/ojnix5.jpg
  http://i51.Tinypic.com/2upekw8.jpg

  He got up on the upper right. If I normally put it will not work.
  The strangest thing is that if I go into the BIOS by pressing F2, he used stop! forever there remains, after the POST, that is the case...

  But if meet the thing and tighten all bolts, even its worse, shutsdown in 1 or 2 seconds and doesn't show any video...

  What do you think is?

  Hello

  I think that it of almost impossible to say what could be bad exactly.
  If the MESSAGE cannot be passed correctly, it means that something is broken on the motherboard.
  Have you checked RAM?

  Faulty or incompatible RAM can cause this problem but it s just a suggestion

  PS: what about CPU? Is it compatible with the new card mother and chipset?

• L750D-1DQ satellite - black screen after the mode 'sleep'

  My new laptop L750D 1DQ does not start correctly after the return of the mode "Eve".
  The screen is very dark, I can't seem to clear up.

  I tried the combination FN + F7, but it does not work (and other shortcut keys do not work ether).
  When I restart, the screen works again.

  What must I do, so I can start to work after returning from the mode "sleep"?

  Hello

  You are able to change the brightness in Power Options Win 7?

  Check this box:
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  You can choose a power plant that is enabled in the profile of power you use.
  You will see the option to adjust the brightness of the plan.
  Set the control to the right to increase the brightness. Do this for setting battery and area setting

  In addition, you should go to advanced-> display settings
  Here, you must choose the brightness of the display and need to change the value of %. This defined the default display brightness when battery and AC power running

• Re: Satellite P300-276: on the right side of the keyboard keys become numbers when NUM LOCK

  When I commit to NUM LOCK keys on the right the number keys on the main keyboard also become as well as on the numeric keypad on the right.
  I tried pressing Fn and NUM LOCK at the same time as on a not extended keyboard, but that makes no difference.

  I also tried different input languages and keyboard styles.
  I can't test with an external keyboard, because I do not have. I downgraded from vista to XP.
  I don't know if this makes a difference because I did not notice this after the downgrade.

  Any ideas?

  Hello

  Sorry, but I think I put t understand your question
  Made, it is whether the digital LOCKING is enabled (FN + F11) and buttons; U, I, O, J, K, L and M becomes to numbers:
  you 4
  I have 5
  O to 6
  J 1
  K to 2
  L 3
  M 0

  If you press FN + F11 again then the buttons must be on back letters...

• Satellite A110-195 after the bios update request password

  After that I updated the bios I have download the form from the website of toshiba for laptop and update if windows it asks for the restart. After laptop computer reboot start too ask for password for bios and system password. now, I can't get to the system.

  I try default passwords like Toshiba, BIOS, CMOS, phoenix and PHOENIX. and did not work. Battery CMOS in a110-195 is soderd on the motherboard. Y at - it no rider that I need to get around to clear cmos.

  Hello

  This strange s boyfriend.
  Why BIOS put a password automatically after the update?

  Anyway. As far as I know the BIOS password can be removed by a technician of the ASP only these guys know how to remove the BIOS password
  I think that ASP is your last chance to get the password of PIF removed from the system

• Satellite A300-1J1 - after the installation of Kaspersky, the camera does not work

  Since the installation of Kaspersky internet security, my webcam does not work, message appears at windows startup, saying: he needs to be reinstalled. How can I do this?

  Also any idea if the sims 3 is likely to work well on this laptop?

  Thanks in advance.

  Hello!

  Reinstall the webcam driver should be easy enough. You only have to download the driver for the webcam on Toshiba driver download page:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you have downloaded the new version, you can delete the old version in Add/Remove Programs, restart the computer, and then install the new version.

  Regarding the SIMS3, you should check the system requirements for the game first. This is a fairly new game, and the Satellite A300 is not the best gaming laptop so I think that the laptop is not fast enough for this game.

  Good bye

• How to start the database after the judgment

  Hello.
  I had a load havy operation, could not kill, so I run the judgment.
  now I can't open the database, which is massage I get:
  "ORA-16038: 3 log sequence # 52 can be archived.
  ORA-19809: limit exceeded for file recovery
  ORA-00312: threads of 3 1 online journal:
  ' / u01/app/oracle/oradata/ORCL/onlinelog/o1_mf_3_48fpv6q1_.log'
  ORA-00312: threads of 3 1 online journal:
  ' / u01/app/oracle/flash_recovery_area/ORCL/onlinelog/o1_mf_3_48fpv95v_.log'
  "
  What should do?

  You can see what follows, if this can help:

  http://arjudba.blogspot.com/2008/07/database-startup-fails-with-error-ORA.html