Satellite P300 - cannot set the password in the wizard of Toshiba utility

Similar Questions

• Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

  Satellite M100-179
  Graphics - ATI x 1400 card.
  Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
  There is no resolution 1368 x 768 in the available resolution list.

  The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
  I think so you re not able to choose this special resolution on the external display.

  In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

• Cannot set the time zone of Moscow winter + 3 hours.

  Cannot set the time zone of Moscow winter + 3 hours.
  Set the time zone Minsk 3 after the GPS clock moves forward 1 hour, timezone is set back from Moscow + 4.
  It is an error of your software when you are ready to address this issue.

  Automatic deactivation date & time(Settings>Date&Time...)

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BIOS HP Compaq Elite (i5-2400 CPU) 8280 cannot set the VT option

  BIOS HP Compaq Elite (i5-2400 CPU) 8280 cannot set the VT option

  found in the security system] [, thanks]

• ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  Hi all

  I tried provide access to filter the group in both SSP and thru Maxl command but still get the error below. Any experience of this problem? If Yes, please let me know how you solved this problem.

  
  

  ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  
  

  Thanks in advance!

  Krishna

  Read the support document that I posted the link, prior to changes for openldap ensure you that it is saved.

• I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of

  I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of image). Adobe staff question: can I expect to find this option in a future release?

  Hi Pcaubi,

  There is no such updates for the same from now.

  I suggest you to please put in a feature request to: Photoshop community customer family

  Kind regards

  Tanuj

• Cannot set the configured property "/ Initial.initialServices".

  Hi all

  I'm getting following error.

  05:21:52, 006 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet

  05:21:52, 013 INFO [STDOUT] * error

  05:21:52, 064 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet

  I checked the path of configuration of two components and the structure of the servlet is as below.

  src/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.java and src/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet.java.java

  For properties files I created them under the path - config/atg/dynamo/servlet/dafpipeline / config/atg/dynamo/servlet/pipeline

  Inside of these I keep the files FacebookAuthStatusServlet.properties and FacebookProfileRequestServlet.properties
  

  The Initial.properties is as below - config/atg/dynamo/servlet/Initial.properties

  The content of Initial.properties is-

  & initialServices =.

  / ATG/Dynamo/servlet/dafpipeline/FacebookAuthStatusServlet,.

  / ATG/Dynamo/servlet/dafpipeline/FacebookProfileRequestServlet

  
  

  Should I have to keep the two pipelines-dafpipeline and pipeline or one of them?

  And my pipeline structure is correct or not?

  How to solve the error above?

  Please help on this!

  Kind regards

  Prateek

  You seem to be confusing core components and classes Java.  They are completely different.  The error message that you get "Unable to resolve component", says that the kernel is unable to find a file of specific properties anywhere in the directories named in your configpath trees.  To be precise, there is no file named /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties in your config directory.  If I read correctly this conversation, it is because the file with this name is a .java file, not a .properties file.  The two most likely causes of your problem are:

  1. you have a file of properties somewhere that mentions/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet as the value of something else than $class.  $class is a special case whose value is sought by a Java ClassLoader in the classpath.  Values of the other properties are interpreted as references to the component, and looked up from core in the configpath.

  2. in the directory tree that contains the /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties isn't in the configpath.  ATG displays the complete configpath during startup.  If your directory is missing, you have may have specified correct information in the entrance of the ATG-Config-path in your module MANIFEST. MF file.

• ORA-12054: cannot set the ON COMMIT...

  Hello
  can someone please tell me what am I missing here?
  I can't create a materialized view, but I can't understand why is this?
  

  SQL> select * from v$version;
  
  BANNER
  ----------------------------------------------------------------
  Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
  PL/SQL Release 9.2.0.7.0 - Production
  CORE    9.2.0.7.0       Production
  TNS for HPUX: Version 9.2.0.7.0 - Production
  NLSRTL Version 9.2.0.7.0 - Production
  
  
  SQL> r
    1* select master,primary_key from user_mview_logs where MASTER='CIS_CASE' or master='CCR_ACTION_DEF'
  
  MASTER                         PRI
  ------------------------------ ---
  CCR_ACTION_DEF                 NO
  CIS_CASE                       NO
  
  
  
  SQL> r
    1  SELECT a.table_name, a.constraint_name, a.constraint_type, b.column_name
    2    FROM user_constraints a, user_cons_columns b
    3   WHERE a.constraint_name = b.constraint_name
    4*    AND a.table_name IN ('CIS_CASE', 'CCR_ACTION_CASES')
  
  TABLE_NAME                     CONSTRAINT_NAME                C COLUMN_NAME
  ------------------------------ ------------------------------ - ----------------
  CCR_ACTION_CASES               ID_PK                          P ID
  CIS_CASE                       PK_CIS_CASE                    P ID
  CIS_CASE                       SYS_C008496                    C ID
  
  
  
  SQL> CREATE MATERIALIZED VIEW mv
    2    REFRESH FAST ON COMMIT
    3  AS
    4  SELECT c.ID,
    5         CASE
    6            WHEN (c.script_id IS NULL OR c.queue_id IS NULL)
    7               THEN 1
    8            WHEN c.script_id IS NOT NULL AND c.queue_id IS NOT NULL
    9               THEN 2
   10         END TYPE,
   11         c.datum + a.due_time / 24 - a.alarm_due_time_1 / 24 alarm1,
   12         c.datum + a.due_time / 24 - a.alarm_due_time_2 / 24 alarm2,
   13         c.datum + a.due_time / 24 due_date
   14    FROM ccr_action_def a, cis_case c                                  --users u
   15   WHERE NVL (a.queue_id, NVL (c.queue_id, 0)) = NVL (c.queue_id, 0)
   16     AND NVL (a.type_id, NVL (c.case_code_type_id, 0)) =
   17                                                    NVL (c.case_code_type_id, 0)
   18     AND NVL (a.code_id,
   19              NVL (NVL (NVL (c.code_id_4, code_id_3), code_id_2), code_id_1)
   20             ) = NVL (NVL (NVL (c.code_id_4, code_id_3), code_id_2), code_id_1)
   21     AND (c.datum + a.due_time / 24 < SYSDATE)
   22     AND state IN (1, 2)
   23  UNION
   24  SELECT c.ID, 3 TYPE, a.due_date - a.alarm_due_time_1 / 24 alarm1,
   25         a.due_date - a.alarm_due_time_2 / 24 alarm2, a.due_date
   26    FROM ccr_action_cases a, cis_case c
   27   WHERE c.ID = a.cis_case_id
   28     AND (a.due_date < SYSDATE)
   29     AND state IN (1, 2);
    FROM ccr_action_cases a, cis_case c
         *
  ERROR at line 26:
  ORA-12054: cannot set the ON COMMIT refresh attribute for the materialized view

  Vili Dialis wrote:
  Rob, if you have any comments on my last query operation, I would be greatfull.

  Vili,

  You must start with a join view which does not contain any aggregate. Just a join of the ccr_action_def and cis_case. And don't forget to include the two table rowid to make quickly updatable. Then create a full blown newspaper on top of the join mv materialized view and create mv aggregation, selecting in the mv to join.

  Kind regards
  Rob.

  Published by: Rob van Wijk on 14-dec-2009 12:09

  And two boards that are not linked mv:

  (1) as has said, use a.id and c.id in a group by clause for the query itself work
  (2) do not use the string ' 14.12.09", use a date but you compare it with a date. So use: date "2009-12-14'

• Cannot set the supervisor on the Satellite L755 BIOS password

  Hi, I hope someone can help me with this problem - I have a PC laptop toshiba L755 and has been implemented of the security protocols on the bios but could not configure the supervisor password.

  I registered the password of the user, as well as the hard drive - user and master password password worked for the password hard drive, but when I try to select (by pressing the arrow towards the bottom of the user password on the password of the bios section) the supervisor password , he jumps right over him.

  Please, any help with this would be greatly appreciated.

  Have you tried to set the supervisor password using option in Toshiba Assist > secure > supervisor password? It is the small Toshiba utility designed for recording of the supervisor password.

• Satellite A30 - cannot set up the binding wireless modem

  Hello
  I have a satellite a30. I just upgraded to broadband and cannot configure the WiFi wizzard. the modem is working perfectly thanks to threads, but cannot set up wireless despite my efforts! Please can someone help?
  see you soon
  Claire

  Hello

  What's the problem?
  You are not able to see the thread or what?

  Are you sure of the laptop and built-in wireless network card?

  Remember that the WiFi card is optional on the Satellite A30 and not all models includes the Wlan miniPCI card
  Thanks for posting more details!

  PS; If the laptop supports a WLan card internal, you should check only that steps;

  -Check if the WLan adapter is enabled on the laptop. Activate the switch on the side of the laptop and the FN + F8 key combination!
  -Check if the windows own WLan configuration is marked
  -Be sure that you use the right WLan encryption and whether encryption is supported by WLan modem (router) and wireless network card
  -Check if the standard 802.11 WiFi, B or G is accompanied by WLan modem (router) and wireless network card
  -Make sure that the router MAC filtering option has been disabled!

  As you can see all of these options are important to connect to the wireless LAN.

• I'm trying to set a password on my administrator account. The message "Windows cannot set a password" appears. WHY?

  Why WINDOWS usually allow me to set a password on my own administrator account?

  Hi KristinMarker,

  ·         Which version and edition of the operating system is installed on the computer?

  ·         Remember to make changes to the computer, after which the issue started?

  In the meantime, try the following steps and check if it helps:

  (Applicable to limited editions of Windows)

  a. right click on "Computer" (Windows Vista or Windows 7) or "My computer" (Windows XP) and click on 'Manage' to open computer management.

  b. in the left pane, expand 'System tools', and then expand local users and groups.

  c. now click on "users".

  d. in the right pane, right-click on your user name and select Properties.

  e. uncheck "user cannot change password".

  f. click Ok and then close the computer management console.

  I hope this helps.

• Cannot set the password for hard drive on the W530 with Intel SSD 520

  Hello

  I have a w530 with an Intel SSD 520 in primary hard drive Bay. Whenever I try to set a password for the primary hard drive, it doesn't stick. If I chose master + user or simply user, I will enter the password, it will take the passwords without producing an error and then just dump back me to the screen of passwords while leaving the disabled hard drive password.

  BIOS is on the latest version for the w530 and SSD, the machine seems fairly normally operate differently.

  Does anyone have ideas how I can activate the password? Thank you!

  Hi, ctenorman

  I did some research and came across this thread of Intel. There are a few people in the thread who were able to set the password on this particular drive. It seems that changing the BIOS "SATA" compatibility mode, set the password, restart, and then change it to "AHCI" worked for some, but not all customers with this player.

  Good luck and let me know how it goes

  Adam

• Satellite L50-B-2CP - cannot set the wireless connection

  Hello

  I have an out of the box of Toshiba Satellite L50-B-2CP portable wihtout os because I had a free w7 license and the wireless connection is turned off. I downloaded the broadcom drivers both atheros from the toshiba site, but also the intel wireless lan driver but nothing works when I go into Control Panel, wireless network card is not visible, I don't see Bluetooth.

  Any ideas?

  The Device Manager has no intel listed lan card wi...

  Are you sure?!
  Have you checked it properly?
  LAN and WiFi should appear in the Device Manager in the network adapters box.
  Please check this!

• Satellite L505 - 14 d - Starcraft II - cannot set the resolution of 1366 x 768

  I recently bought this laptop, it has an ATI Mobility Radeon HD 5165 HyperMemory graphics card, however, when I installed the game Starcraft II, and tried to change my graphics settings, told me that my video (could say graph, or display card, I do not remember) card was not recognized, and that I might want to check this... I thought, well, that there is probably no problem, as long as everything works fine, but the problem is this; This isn't. I'm unable to set the resolution of 1366 x 768, which is the maximum resolution of the computer normally. The maximum resolution that I can put in this game is 1280 x 768...

  This starts to become quite annoying, not a HUGE issue by any means, but still, I would like to get this issue resolved. ;)

  My apologies if you have problems to understand what I mean here, that English isn't my mother tongue. Do not hesitate to ask me if you need clarification on anything whatsoever.

  Hello

  > not thought, well, surely this is no problem, as long as everything works fine, but the problem is this; This isn't. I'm unable to set the resolution of 1366 x 768, which is the maximum resolution of the computer normally. The maximum resolution that I can put in this game is 1280 x 768...

  Are you able to set the resolution of 1366 x 768 laptop s display settings?

  If Yes, then I guess that this has nothing to do with the laptop but with the game settings.
  Maybe the game is unable to use a higher resolution because of the pilot or the graphics card compatibility.

  I played a lot of games in the past on my laptop and to be honest game display settings have nothing to do with the general display resolution settings. My laptop resolution is 1400 x 1050, but the different games are available at 1024 x 768 due to the better performance