Satellite P300 - problem on Windows 7 32 bit card reader

Similar Questions

• Photosmart 8450: Does the Photosmart 8450 under Windows 7 64-bit card reader work?

  Under Windows XP 32 bit card on my Photosmart 8450 network reader appeared as a network drive in Windows Explorer. Now that I've migrated to Windows 7 64 bit I get no network drive and if I put an SD card in the drive I get a 'map' mistake of access on the display panel. It is to be expected with the built-in drivers for Win 7? If so, is there no work around?

  Hello

  Thanks for the reply and sorry for not getting back sooner. Been strongly concerned about the end.

  I just find the solution to both problems.

  1. the card reader does not accept SD - HC cards. When I put an ordinary SD it worked fine.

  2 network drive mapping could not find the printer, even if I can print to it without any problems. I had recently also changed the router and discovered that the IP assigned to the printer was within the range of IP addresses assigned by DHCP. Changed static address to + 1.  Still did not work; posted in printer address was unidentifiable. Sitched printer, pulled ethernet cable outlet, turned on, plugged the ethernet cable. Bingo! The network drive works now.

• Satellite U500 - problem installing Windows 7 64 bit

  Hello

  I just bought a U500 laptop and am trying to install the 64 bit version of windows 7.
  It is obtained in the section "Installation program starts Services" and comes with a Setup error saying that the laptop needs to be restarted.
  When it is restarted it comes up once again with the error and keeps looping through.

  7 the window was on the HARD drive when I bought and was the first option to install when the laptop started upward. There is a recovery disk, but it degrades to XP, something, I'm not keen. I tried to reboot in safe mode, all three options, nothing helps.

  Any help would be much appreciated.

  > the window 7 was on the HARD drive when I bought and was the first option to install when the laptop started upward. There is a recovery disk, but it degrades to XP, something, I'm not keen

  I put t understand that said you the Win 7 64 bit was preinstalled, but the recovery disc contains Win XP?

  As far as I know, the most recent series of laptop is preinstalled with Win 7 64 bit and the recovery disk contains the Win 7 32 bit there is also a preinstalled Toshiba Recovery Disk Creator that allows you to create the own recovery with Win 7 64 bit OS disk

  However, if the laptop was preloaded with Win 7 then a HARD drive recovery option should be available also. Turn on the device, press F8, select Repair computer mu then Toshiba HDD recovery
  This should start again Installing Win 7 64 bit

• Satellite P100 - 347 (PSPA6) and Conexant audio problem in Windows 7 64 bit

  He is a [old problem | http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=175972#175972] which seems to have affected many people.

  Conexant HD Audio (hardware id: HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5047 & SUBSYS_1179FF31 & REV_1000)

  There has been no official driver published this work in Windows 7 64 bit. It works fine in 32-bit, windows 7, and using different drivers from other sources + partial + fix can be found.

  Using these drivers:

  [Audio 4.8.0.0 | http://209.167.114.38/support/Download/files_downloads/pspa1c/vista/Audio4.8.0.0.zip]
  [sp35683 | ftp://ftp.hp.com/pub/softpaq/sp35501-36000/sp35683.exe]

  and some of the advice [here | http://laptopforums.toshiba.com/t5/Windows-7/Windows-7-64-bit-drivers-for-P100-P105-Users/m-p/67516], it is possible to get the proper functioning, but * only * when using the S/PDIF (HD) audio output. When the S/PDIF cable is removed the internal speakers make noise for a fraction of a second, then silence.

  I tried everything and this issue has been around for months and months, but no perfect solution seems to exist. I was wondering if there is a way to update the drivers of the HD Audio Controller, integrated in Windows 7. Or maybe a hack that allows the internal speakers continue to work (they work for one second!)

  Please, any help on this would be greatly appreciated

  Hello

  The Satellite P300 and P500 Satellite supports the audio chip Conexant too audio driver published for these two models of laptops should work on Satellite P100!

  Please check this!

• Satellite P300 - problem after BIOS update

  Hello
  I have:
  Satellite P300-20 b
  PSPCCE-05J011RU
  I updated my BIOS with this update of the BIOS of your site (30/04/09, 3, 40 - WIN version)
  My problem is:
  Loading and relocation of attempt of Windows, the following error message is fixed:

  "Technical information:
  STOP: 0 * 0000007 B(0*F78DE524,0*C0000034, 0*00000000, 0*00000000)'

  So I can't respond to a portable computer HARD drive, the HARD drive is defined in the BIOS.
  Also I checked the HARD drive on the virus, it's pure against viruses.

  Could you help me to update the BIOS to a working condition.

  Hey Buddy,

  This stop code means you use a bad SATA controller driver. The installation of XP, to integrate the SATA driver for install XP. There is a lot of discussion on this issue here in the forum.

  For Intel chipset, you will need to download Intel Storage Manager of Toshiba's official site and follow the instructions here to reinstall Windows with the SATA drivers:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  Solution replacement follow the instructions posted by peterk_1. Setting IDE mode instead of AHCI in the BIOS will help too :)

• Can satellite A500 - I install Windows 7 64 bit?

  I first bought a Satellite A500 with 4 GB of RAM there are a little over 3 months with Windows 7 64 bit Home Premium installed. Initially, I got the original dramas with finding drivers 64-bit etc., then it ran OK for a while. After about 2 & a half months I started having BSOD with error message related to a nvidia .sys file. After a few weeks of this, update the latest drivers etc and a number of unsuccessful attempts to diagnose the problem, it's that occur whenever I used the laptop and up he took the touchpad died as well. The company I bought at gave me a laptop replacement.

  The new system is also a Satellite A500, and although it has a different model number and a CPU faster it is also virtually identical to the one I had already with 4 GB of RAM and graphics card from nvidia at the same address. However, for some reason Windows 7 32 bit has been pre-installed. I don't know why the company has not installed the 64-bit. A call to the dept tech with the issue gave rise to the answer "better for you", which means that 32-bit is better for me.

  My laptop is capable of 64-bit. I know that when you run the 32-bit version, it uses only up to 3.2 GB of installed RAM (my system says 2.99 GB is usable - assume the rest is allocated to graphics?) but I read a post where the poster says it is running 32 bit Win 7 was actually faster than the 64-bit version though even he was not using all the RAM.

  * Can someone tell me if I'm running the 32-bit version of Windows 7 rather than the 64-bit version better? *

  * If I'm better with 64-bit, can I switch to 64-bit or what I need to do a complete reinstall? * No installation disk provided. Assume that the installation files are on the hidden partition.

  Although I have not had a BSOD with this new laptop, I had a couple of instances where the system froze temporarily with the messge "your display driver has stopped working" followed by a recovery. Is this a thing Toshiba, nvidia or Windows 7? I have read quite a few other posts of people with laptops similar to mine who have had the same mistakes of Toshiba/nvidia but no resolution. * If it's going to be a problem with the graphics card, I'm better off the coast with 32-bit or 64-bit Windows 7? *

  Any advice would be appreciated muchly.

  Hello

  I a500 and run Windows Ultimate 64-bit, it's best to run 64-bit to 32-bit windows. You must copy of 64-bit Windows to install, it is not big problem to get it. All the drivers you can find on the Toshiba driver page:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Satellite U500 - problem with Windows 7 and HSDPA USB modem

  Hello
  My wife recently purchased a Toshiba Satellite U500, that came pre-installed with Windows 7 64-bit.

  A few days later, I bought a modem high-speed HSDPA USB by Alcatel. The problem started immediately that we plugged the modem, that drivers would not install.
  Then I went to the Web of Alcatel site and found the drivers for windows 7 for her. But then we hit another road block since now the drivers are installed and it does not detect the modem, but whenever we try to connect to the internet, screen flickers at the connection for a moment and then disconnects again.

  I found cela a lil strange so I tried to connect using my own pc which has a 32-bit Windows 7 and it works fine there.
  It is the same for a machine that still had Windows XP. Makes me think its something to do with 64-bit Windows 7 itself. Could someone help please?

  Thank you and best regards.

  I don't think that someone here can help you with this problem. You will be very happy if someone on this forum has exactly the same model of laptop including same USB modem.

  In my opinion, you have two options: either you can clarify this point with the support of Alcatel (they have enough experience with own products) or with people from the nearest Toshiba service provider service.

  Have you tried to test the features with the Win7 32-bit version?

• Satellite P300 - problems with the buttons of enlightenment

  First of all, I would like to apologize for my bad English, I'm French actually.

  Hi, I bought a laptop Satellite P300, a couple of days, and already I have a problem with tactile keys (one on top of the keyboard).

  Actually, the only one of the left, which is supposed to turn off the sound used to keep away the keys lights and Satellite logo. One day (and I don't know why), when I pressed her, she actually cut the sound. And now, the first two keys (mute and shortcut of windows media) do not work, but the other four (Media Player control).
  I tried Toshiba Assist, and the tool for the configuration of the pushbuttons (I don't know the English name of this tool) but I couldn't set the keys, they were not on the list "button name".

  So, does anyone have an idea how to solve this problem?

  I apologize again for my English.

  Hello

  I assume you are using Windows Vista because you bought the laptop a couple of days and so I think that you should try to reinstall the Toshiba value added Package. This package determines the buttons of the lighting that you mean and others (for example the FN keys too).

  The latest version, you can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  1. download the latest PPV on the Toshiba site
  2. go in Control Panel > Add/Remove programs. Find the Toshiba value added package and remove it
  3. restart the laptop
  4. download and install CCleaner. This cool cleans up the registry of Windows and system files. He should find some registry keys of Toshiba you should remove with CCleaner.
  5 reboot the laptop
  6. install the PPV that you already downloaded
  7 restart once again

• Touchpad on the Satellite P300 problem - 15 d

  Hello world!!

  I bought a Satellite P300 - 15 d and I am experiencing some problems with the touchpad.

  I simply turn on the pc, and sometimes the touchpad doesn't work, sometimes not.

  I tried the FN + F9 key, but it just doesn't work. Even the touchpad appears in the list of system devices.

  I find that the web and this Toshiba forum supported by aid, but I've not found anything related.

  Please help me!

  Look like a hardware problem that should be checked by a technician or an authorized service provider.

  If I were you I would click [here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871], look for the nearest ASP in your country and send my machine to them to fix this.

  Welcome them

• Games on Vista - Satellite P300 problems

  Hey.

  I just bought a Toshiba Satellite P300-1This comes with Vista Home Premium. The problem is that I can't run any game on it. I tried NFS Most Wanted, Battlefield 2 and Titan Quest(theoretically I should have no problems with my configuration-processor P8400, video Ati 3650, drivers up to date).

  When I try to launch the game, I get a black screen and the computer crashes, I need to restart. Any ideas?

  Have you installed SP1 for Vista and all the other patches?

  Are you sure that the drivers up to date? Check this on the Toshiba site and you must use the graphics driver Toshiba because they have protection against overheating.
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Do you have an antivirus program? Try turning it off while you play games.

• Satellite Pro A200 and Windows XP 64-bit possible?

  I am the owner of this laptop & I wonder if it is compatible with Windows XP 64-bit.

  I work with 3dsmax which does not work on Vista (32 or 64 bit).
  Y at - it problems with the drivers & where I can find drivers for 64-bit Windows XP?
  See you soon

  Toshiba does not 64-bit drivers for Windows XP.

  So you must search on external Web sites for the drivers but I could only you n t get all the drivers. To be honest if you don t use 4 GB of RAM or more in this laptop Windows XP are the best choice.

  Here are some examples where you can search for drivers:
  [www.intel.com]
  [www.realtek.com]
  [http://aps2.toshiba-tro.de/bluetooth/]
  [http://aps2.toshiba-tro.de/wlan/]

• Satellite A300 - upgrade to Windows 7 32-bit or 64-bit?

  Hello

  Im not sure what to do. And I can't find you an answer google hollow.

  I have a portable satellite A300 and upgrade to Windows 7 but im do not know if I need to upgrade to the 32-bit version of Windows 7, I have now the operating system is 32-bit vista. Or can I also upgrade to the 64 bit version of Windows 7. I don't know if the system can handle and coop with the 64-bit version.

  Is there anyone with a clear answer?

  Thanks in advance

  Welcome Gerald

  Hey mate,

  Thank you for your comments! :)

  If you have Vista 32 bit you can only change to Windows 7 32 bit. For the 64-bit version, you need to do a new installation, upgrade is possible on Vista 64-bit.

• Satellite P300 - 18 M - Windows Setup cannot continue

  Hi, my first post here, hoping for any help.

  I recently bought a Satellite P300 - 18 M, from an independent retailer with no return policy. good on the PC is a brand new, sealed, etc and I get the Toshiba standard warranty.
  When I do the initial installation I received a message all in settng upward of Windows Vista Home "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows click on 'OK' to restart the computer announced then rstart installation. »
  I tried a few times more full-time catering and the third HARD drive it installed, but...
  either he starts, I get to the password screen then all invent locks, the mouse pointer freezes then the screen becomes full of horizontal lines.

  or

  I've had a few times in windows for a few minutes (2-5 minutes) then the mouse pointer freezes, 3 seconds later the entire screen is full of horizontal lines, everything locked can only turn off the coast.
  Toshiba software error, so no warranty claim and advised that I buy the DVD (£29.90) that I ordered it, on a delivery of 14 days of recovery.

  Any other help or suggestions much appreciated as im not confident of this DVD, being a brand new sealed unit, why corript of Vista in the first place.

  Thanks in advance

  Andy

  Hello

  In my view, that the P300 is equipped with the ability to drive HARD recovery. This means that you could restore the operating system of the image that is stored on the HARD drive.
  To do this, you will need to power the laptop and must press the F8 key.

  A start menu should appear, then you should choose the first option called fix my computer.
  Then, you must choose the option called Toshiba HDD recover or something like that. It should be the last option.
  This procedure helps you reinstall Vista again.
  This facility could be that you can burn the own recovery disk using the preinstalled software called Toshiba Recovery Disk Creator.

  But if the recovery of HARD drive does not work you will need to use your orderly recovery DVDs and have to restore it again.
  If the laptop will not properly work after using Recovery then DVDs I recommend to contact the ASP again and to explain the whole story.

  Good luck

• Problems installing Windows 7 64-bit SP1: "The Installation was not successful" DS_S_SUCCESS (0x0)

  I'm unable to install the Windows 7 SP1 on my laptop.  I am running Win 7 64 bit and tried to install the 64-bit SP1 via the feature updates automatic first, then with the SP1 download manually (Windows6. 1 - KB976932 - X 64 .exe).   The progresses to install SP1 to the point where it shuts down the system and it is charging but when I log in I get the dialog Setup SP1 reporting "the Installation was not successful".  By clicking on the link error display shows DS_S_SUCCESS (0x0).

  (I followed the steps of troubleshooting 1) by using the Troubleshoot Utility "Difficulty of problems with Windows Update" and 2) installed tool Rediness of updating system, but the installation of SP1 still fails with the same error.

  I have successfully applied the SP1 on a different system.  No idea why I have problems with my laptop.

  Any ideas?

  C thx.

  Have you checked your hard drive to find errors? Another obscure, you might try is to disable User Account Control temporarily.

  Its possible, you need to perform an update of the BIOS if one is available for your ThinkPad T60p. Also, check the updated chipset drivers.

  Furthermore, disconnect any non-essential device, you may have attached to the system.

  Its possible the SP1 download may be corrupted, I would like to download another copy and try again.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• PROBLEM WITH WINDOWS 7 64 BIT & PRINTERS

  Hello

  My company is replacing all of our window xp machines and we head to widows 7 64-bit. We currently have a print under windows 2003 server.
  I downloaded the universal readers of hp windows 7 64 bit, the new drivers for a printer, goes \\servername, view the remote printers on a windows 7 64 bit pc, and adding drivers 64-bit configuration. On the print server, I can see in this printer, additional drivers x 64 windows XP and Windows Server 2003 driver installed.
  My first question is that correct? Shouldn´t I see something like windows 7?
  After that if I try to add the printer to the pc windows 7, is going to add a wireless network..., select a shared printer name, I always get the error as it is impossible to connect to the printer. Operation failed with error 0x0000007e.
  However if I try add, using a tcp/ip address or the hostname of the printer is installed ok.
  Is it possible that something to do with the driver? It is not picking up the right one?
  Thanks and rgs,
  Ricardo Mendes

  Hello

  This solution seems to have worked for multiple users.

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  To connect to your server, start "regedit" and go:

  HKLM\SYSTEM\CurrentControlSet\Control\Print\Printer

  And remove the key, "BIDI" again try to install your printer, it should work.