Satellite P300-PSPCCA - screen went pink

Similar Questions

• Where and how to buy a recovery for my Satellite P300 PSPCCA 015015 disc?

  Hello

  I'm sorry, I know this question has been asked before, but I can't seem to find the solution.
  I have a Satellite P300 PSPCCA-015015, (which came with Windows Vista, when I bought it).
  I did a clean install of Windows 7. Now many things did not work with this OS if I want to reinstall the previous version of windows.
  The only thing is that I have created a recovery disk and lost their: (.)
  Now, I have the hard disk that windows creates the recovery disc files in. All I need is to either 1 get the software recovery disk creater my model or
  the recovery disk full reinstall with factory setting.
  Would you know where I could get one of these two.
  I am WIndows 7 CAP to death at the moment and Im regreting his installation and lose my disks :(

  Oh also to tell you I'm alive in the Japan now, but I bought the laptop in Australia, so there English OS, more I was wondering how I would go he posted to the Japan.
  or if I go somewhere in Tokyo and solve this problem by a toshiba shop that performs repairs.

  Thanks I hope I can get an answer and a solution of someone.

  I don't know how it works in Australia, but I think you can order the original recovery by Australian Toshiba service provider media.
  I don't know if they'll send it but a friend you can order and buy it for you and send you later to the Japan.

  I think it's the easiest way to get the original Toshiba drive facilities.

• Re: Laptop screen went pink and white

  Help, half my laptop screen went pink and white! This means a new screen is necessary - its only 3 months.
  He began to blink, but is now permanently rose/stripey.

  Please don t waste your time here and contact the nearest Toshiba authorized service provider as soon as possible and let them repair your laptop.
  The guarantee is valid and repair will be free.

• Satellite P300 (PSPCCA) Win7 x 64 drivers

  Inquiring if anyone can know if/when Toshiba will put on some drivers for my laptop model Satellite P300 (PSPCCA-01W013)?
  I installed Win7 Ultimate x 64 and most of the drivers have been installed as part of the installation, but my camera and the microphone does not work and I was unable to get them to work with all the other drivers (for example, the vista x 64 drivers)
  Thanks for any help.

  Post edited by: Dave359WA

  Hello

  I got this Toshiba FAQ on laptops supported by Windows 7.
  http://APS2.toshiba-tro.de/KB0/TSB9902P50000R01.htm

  As you can see the Satellite P300 is that listed there.
  I guess that the drivers will be released as soon as possible.

  The webcam and the microphone does not work?
  I think that you need to install the Chicony webcam software
  In your case, I recommend the software available for Vista 64-bit.
  Some Vista drivers are compatible with Win 7. That's why it worth trying to install webcam for Vista software.

• Satellite P300 - white screen after waking from sleep state

  I'm having this problem:
  The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

  There seems to be a solution:
  An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

  described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
  -----
  I also found this, but it didn't really help me much further.
  [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
  -----
  In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

  -----
  Edit: link and no need for words of line. : s
  Edit2: grammar correction.

  Hello

  > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
  If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

  In your case I would recommend upgrading the BIOS and graphics driver.
  In addition to keep your operating system up-to-date.

  I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.

• Satellite M70-340: screen went completely blue or black

  Hello world
  I just bougth a portable Satellite M70-340 and twice tonight screen entered a single color (black once, once blue) and although I could still hear the windows work (I could hear the Windows alert sounds and alerts by MSN mail), the screen went completely blue or black. I assume that the error is caused by a problem of display driver, so I downloaded the latest driver present Intel on this site. I don't know if it will work.

  My question is, did this happen to someone of you? How did you solve this problem? And even though I have an Intel Graphics Media Accelerator Driver for Mobile, I could install the ATI driver on this site? (I prefer ATI driver since it is out of date.)

  Thank you all for your interest,
  Best regards.

  I guess you have mobile Intel graphics card. In this case, you can only use the graphic driver intel from the Toshiba page or are also website of intel.

  But you cannot use the ATI graphics driver! You laptop has ATI No. graphics card!

  However, you suggested that it is a new laptop. I would recommend to contact Toshiba service partner in your country. The guarantee is valid and you should take it!

• Satellite P300 (PSPCCA-03W01Y) - no microphone after Windows 7 update

  Hello

  After updating my P300 to Windows 7 (32 bit) my microphone did not work. I understand that the MIC is part of the camera, but I can't find the driver for Windows 7 32-bit update with. The camera works fine.

  There is a similar topics that allows you to download the driver directly, but after looking at the Toshiba Australia and toshiba europe sites, I have not been able to find.

  Anyone know where I can find this driver?

  Thank you.

  Hi stelth_turtle,

  You can try the 32-bit driver for Vista from Toshiba Australian page. Usually this driver also works on Windows 7 because Vista and Windows 7 are very similar, so it would be worth to try and install the 32-bit driver for Vista.

  If it doesn t work take a look for Satellite P500 drivers. On the Australian page, I saw a 32-bit Windows 7 driver for this model and I guess this should also work on your P300.

  Check this box!

• Satellite P300 (PSPCCA) - new, no sound

  Hi all users of Toshiba laptops,

  If you have had a similar problem or know how to fix this, please help me. I bought a brand-new p300 of Toshiba Satellite, drawn by the promise of high quality sound (Harman/Kardon), among other benefits. To my surprise and disappointment, the laptop is completely mute. No conflict pilot didn't report in Device Manager. Sound level indicator volume control is alive, but not sound out of speakers. Looking for the problem on the Internet, has revealed a possible incompatibility pilot with Vista 64 SP1. No new drivers are available on this site. The sound is not muted in the volume mixer, turn the control of physical volume on the laptop had no effect.

  The most upsetting is the fact that I had to spend an entire weekend trying to find a solution to a problem that shouldn't be there in the first place. That's after almost 3 k (NZD) on this thing. I mean, if it's normal, then Toshiba has a serious problem with quality control. But that's just my frustration talking. If anyone can help me, I'll be eternally grateful :).

  The other important point - headphone produces sound when it is plugged in, the sound card looks very good, a show just not the speakers.

• Satellite P300-156 - screen will not come

  Hello

  When I turn on the laptop, all the LEDs come on as usual, including the band of touchpad and media buttons, but the screen is totally blank. I hear the disk hard being accessible and see its LED twinkle according to a normal start, but the screen is totally empty through the full boot and lights never.

  It doesn't seem to be consistent with the problem. It's twice its arrived now in 2 days, and it took me about half an hour on two occasions to finally get the screen to come to life by making many power on / power offs (holding down the power button), removal/reinsert the battery.

  Has anyone encountered this problem before? Any ideas on a solution?
  I guess it's a ribbon cable problem maybe.

  Thank you very much

  Hello

  When you start your laptop's disk HARD assets as usual? I mean is loaded OS you hear the Windows sound)?

  If possible, try to connect the external monitor to your laptop to see if something appears here.

• Satellite P300-PSPCCA - malfunction of the fingerprint scanner

  I had my p300 for a little over 8 months know and use the reader of fingerprints as well as the software to connect and protect a VERY large amount of personal data and work related documents.

  And yesterday when I tried to access some schemes of work I opened the folder and right click on the file clicked on unprotection leader skipped the small box with the fingerprint to the said analysis of fingerprints digital I did and he said too short scan.
  I scanned again and again and again same result every time.

  What I do im thinking of sending it to the service to have the reader/scanner replaced.
  I tried to reinstall the software and I restored the entire score of the point has upward, two weeks ago, but with no result.
  He said still too short.

  Is their anything I can do on my end, so I lose my phone again for 6 weeks (Yes, it took them that long to repair my laptop and that I still had to ultimately collect the repair center)

  Hey Buddy

  I found this FAQ from Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB9802O50000R01.htm

  This doesn t will provide a solution to your problem, but it provides information about the files that are protected by fingerprints.
  The fact is that if you would like to try to reinstall the OS and move the files to another location then the files are not accessible more and you will not be able to take out them more :(

  I have no idea why your fingerprint reader does not read your fingerprint. Maybe there is something wrong with the sensor or something like that
  I think that it s not a software issue since you can receive and message from fingerprints, saying the analysis was too short so I m thinking that it s associated with a sensor or a scanner.

  Hmm, it would be interesting to know if the footprint would be functions after the system recovery, but that means that the whole HARD disk should be formatted and you would lose the files

• No keyboard when you install Windows XP on Satellite P300 PSPCCA

  OK, I just got my new 500 GB HDD and slipstreamed XP with SATA for XP drivers can see the HARD drive and the game works fine.

  But now after XP loads its files and I get to the part where you can choose between configuring XP on the selected partition (ENTER key), create a partition (C button) or delete a partition (key D) none of them works, not even the key F3 to exit.

  The keyboard doesn't have a driver to be slipstreamed so or is there a setting in the BIOS that needs to be changed? All of the suggestions.

  I wonder why you're not abele to use the keyboard. Usually Setup will load the necessary drivers when you first before install this option screen appears

  Which laptop model you have?
  Have you tried to use the Toshiba Recovery disk?

• Satellite P300 - black screen on startup

  Hey,.

  My book freezes the other day and then stop. Since he was unable to rebot. Are power and battery light and when I go to turn it on it lights up and will ether stay on for 5 seconds and turn off or stay on but always with a black screen.

  Anyone of you guys please help.

  Hello

  In your case, I would first check the memory modules.
  The point is that a faulty module would affect the startup process of laptop you would not be able to access the BIOS, if the modules are defective.

  You said that the laptop shut down it would mean that temperature is rising to a higher level and so the laptop turned off to avoid the equipment against damage

  In your case, all may be possible as I said; RAM should be checked initially, if the Rams are ok, then other parts like the CPU and motherboard must be verified
  I think you don't have much experience, and not enough resources to run tests and this is why I recommend to contact a technician. The professional guys could test parts and eventually could replace

• Satellite P300 (PSPCCA-05Y01Y) - HARD drive does not

  I bought my laptop in New Zealand and now I am in India, last week my laptop suddenly stopped working after I tried to open it up to clean the heatsink (the fact is that I did not open the folder completely, I removed the RAM, HDD, battery and screws, while I tried to open it it doesn't move so didn't want to take any chances so I replaced everything as it was and it) closed).

  Later, when I press the power button it lights up with the HARD disk after disk HARD 2 seconds, but power was still not display either!
  Need help to fix, I took it to a repair center and they told me that the problem was with the motherboard and replace costs a lot. You are looking for an alternative solution.

  Any help is appreciated, thanks in advance!

  Hello ralu

  I hope that you will understand me when I say that on this path, we can only speculate what may be the problem and nobody here can offer an accurate diagnosis for your problem.

  Fact is that laptop is removable 1000 times and when it is made on the right track, it should work properly. The HARD drive can also be removed several times, but it takes work if there is no problem with connectors on HARD drive or HARD drive itself.

  If the HDD doesn't work I see here two reasons only: is troublemaker HDD or there is a problem with the HARD drive on the motherboard connector. What you think the problem may be?

• Satellite P300 (PSPCCA) - fingerprint reader doesn't work with IE8

  Fingerprint reader worked very well for all websites accessible Internet Explorer 7 vi.
  Then upgraded to IE8, fingerprint software has stopped working in IE. Uninstalled the old software of fingerprint and a downloaded from the toshiba site - updated version still does not.

  Does anyone have a similar experience?

  Hello

  As far as I know the old fingerprint software doesn't work with IE8 and Firefox 3
  You will have to wait for the update.
  I m not very well what version it will be, but I think soemthing with 3.0 or higher

• Toshiba Recovery Disc Creator does not work on my Satellite P300

  Hello

  I need to make my drive recovery for my Satellite P300 (PSPCCA-05V01Y), but the Toshiba Recovery Disc Creator does not work, as it is said that it is not a file on the pc HARD drive recovery.
  I tried before, and he had a problem with the core files, saying he was corrupt.
  So I was wondering if there is in any case I can download the installation of HARD drive recovery so that I can install and put it back to "factory condition" and reburn the recovery disk?
  Cheers for any help
  Mikey

  Hello Mikey

  The situation is quite complicated. When you've got your laptop recovery files was recorded on the second partition in folder HDDRecovery. The second partition and backup files should not be modified.

  If you did something with the second partition or this file recovery Toshiba creator cannot find these files and the recovery media cannot be created. This will work with the factory only settings. but I see another problem there.
  Theoretically, you can now install new OS using the installation procedure of recovery HARD drive and with factory State, you should be able to create DVDs, but if the Toshiba Recovery creator can not find the files I'm afraid that the installation of HARD drive recovery can have the same problem.

  If you want you can test. Try to start the installation of HARD drive recovery.