Satellite P300-V25 - touch there jumped

Similar Questions

• Satellite P300 - 271 - how to replace the keyboard?

  Hello
  I have a Satellite P300 - 271 and there are a few damaged keys. I bought a new keyboard for this laptop.

  Is there a caraa how do I replace the keyboard?

  Greets, Benjamin

  Hi Benjamin,

  As far as I know that these manuals are not for the public. Technicians certified for laptop only can download these manuals. You can download the normal user manual that came with your laptop.

  A friend told me to replace the keyboard to remove the keyboard first, support but it s fixed by screws on the underside. After that, you can remove the keyboard but be careful with the cable.

  Disassembly of the laptop is a little tricky. If you n t have experience with that you should ask a technician for laptop help.

• Re: Satellite P300-156: keyboard freezes touch touchpad - mic is not w

  Hello

  I installed Windows 8 on my satellite P300-156 and now I have a big problem.
  My keyboard crashes when you touch the touch pad. In addition, the microphone does not work when the Windows Device Manager indicates that it is ok.

  There is no windows driver for this laptop 8...

  There are no drivers for the laptop because it isn't win 8 supported series.
  But even if there is no Win 8 drivers, the system should not freeze affecting the touchpad module.

  However, the Synaptics touchpad driver for Win 7 or 8 to win can be downloaded from Synaptics page.
  Recommend check it out!

• Satellite P300-23V - marker is suddenly jump

  I have a SATELLITE P300-23V with Windows 7 Home Pemium.
  I have an irritating problem.

  When I write a document in Word or write an email in Hotmail manufacturer is suddenly hopping somewhere else during the writing. When you are looking at the keyboard when writing and then search the text, the marker was moved to another place and the wrtitng continues from there. Very frustrating.
  I have now examined very closely the text well written and as I said the marker suudenly, no reason, hopps to another location when writing.
  Have someone else has experienced this problem and can do something to remedy this?
  Is it a hardware problem or software?

  Maybe, while typing, you touch a touchpad and cursor moves to another place... Disable a touchpad for a while check if the problem persists

• Satellite P300: cursor jumps to different positions while typing

  Hi all

  I have a Satellite P300
  I have problems when I type.

  When I type using the keyboard, the first two words are ok, but then the words started typing in the wrong place, for example more away in the middle of the sentence, I type.

  Anyone please help? Thank you

  Hi dude

  I had a similar problem.
  By typing the cursor is everything at different positions, and I wasn't able to finish a sentence.

  I though that there could be something wrong with the keyboard, but finally I have opinions that I touched the surface of touchpad accidentally while typing?
  I disabled the touch pad using the fn + F9 and questions went

  So maybe it of the same reason for you

• Satellite P300-1gn starts up it free or by touching the Mute button

  My satellite P300 1gn starts that it self.
  It starts also toutching the Mute button or button CD (they are part of the extra of the enlightened next buttons set the power button. Is it possible to disable these keys additional lluminated?

  I wonder that it is a hardware issue or a result of a virus?

  Help, please.

  Hey Buddy,

  It starts by itself from the standby or hibernation mode? Or when you turn the computer off completely?

  Have you tried to load the default settings in the BIOS?

  The laptop must usually start only when you press the power button. If it is an update of the BIOS might be useful in this case

• Satellite P300 - is there a keyboard backlight?

  Hi - did anyone know whether Satellite P300 has a back light for the keyboard? I suppose that it is that the keys are black but can't for the life of me how to turn it on. Any help is appreciated.

  As far as I know bright keyboard will be offered with the new series of laptop A500 and P500.
  I'm 100% sure that satellite P300 doesn't have this keyboard.

  You can check the specifications of the models of different satellite Satellite pro P300 and you will see that is mentioned nowhere this keyboard.

• Satellite P300 - Value Added package does not work after the computer restarts

  Hello

  I have a Toshiba Satellite P300 PSPCCA Windows vista ultimate x 64. I can't do my work button soft touch. I downloaded latetest VAT package and installed. After installation it asks to restart but I restart my laptop and I make just restart Flash Card and my button works all good touch app that is silent, Media Player, etc., but once I restart my laptop it stops working.

  I tried the uninstaller and reinstalling but no luck. I read in the forum toshiba on running CCleaner and do a fresh install but still have the same problem.

  Does anyone of you knows how to solve this problem.

  BTW, I got the software AVG internet security on my system, but have added folder toshiba for exclude of realtime scanning just in case if its causing problems but not luck. I searched qurantine folder and its nothing in there.

  Please help me get my work button soft touch.

  Thank you.
  Kind regards
  Jay

  Post edited by: Jay Padia

  Hello Jay

  I agree with Akuma. All you can do is remove VAP preinstalled system and reinstall the latest version. Why you didn t follow the instructions to restart the computer after the installation of VAP?

  I installed VAP several times on my Satellite P200 and Satellite A300 without any problem, but after installing the latest version, I rebooted phone immediately. The procedure of the facilities has been completed and necessary processes started in the background. I guess that's the problem on your Satellite P300.

  If nothing is done the last step is to install the OS by using the DVD facilities. After doing this you will own preinstalled OS and everything works well again.

• Install Windows 8 on Satellite P300

  As usual rushed in and installed Windows 8 on satellite P300. What error - slow, loss of functionality. How to get back to Vista was preinstalled or is there a way I can fix it to run windows 8.
  Processor Intel (r) Core (TM) 2 Duo CPU [email protected] 2.4 GHz, 4.00 (2.99 usable) GB RAM 32-bit system, x 64-based processor.

  Satellite P300 is plu laptop comes with Vista, but also supported for Win7. Unfortunately, it is not supported for Win8 so, in my opinion, there is no sense to install Win8 on it.

  Win7 works perfectly on this machine so if possible use Win7 on it. in case you want to use original Vista, you must install recovery using recovery DVD image. This way only to s to have factory settings once again.

  The question is: do you have the recovery disk?

• Satellite P300 - ribbton need for touchpad cable

  Hello

  I need a ribbon cable for my laptop. The cable is designed for the tablet.
  Laptop model: SATELLITE P300 - 1 to 8
  Model No.: PSPC0E - 1H008EN

  The cable is: HAMBURG - W E235863 AWM 20798 80 60V VW-1

  Thank you

  N

  Hi madnad,

  I think the best way would be if you contact a service provider authorized in your country because they can order all Toshiba spare parts.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Just get in touch with the guys and explain what you need. I'm sure they can help you :)

• Satellite P300 - Drive necessary explanations

  Hello

  Just trying to understand what is on my records. I have Satellite P300-150 with 500 GB. It has 4 partitions (I think) with a hidden.

  C: drive is (Vista 117 GB capacity) however its filled up quite quickly so I started saving drive D (232 GB of local disk capacity) which had nothing about it. There is no drive E (but under Advanced System properties, I found a labeled disc WINRE... is this drive E?) Then walk F (data capacity 113 gb with 5 GB used) it's enigmatic whats me... If the mysterious E Drive is the WINRE so what are data on the F drive?

  Why have I not 4 discs? The reason I ask, this is drive C is high filling... so I do the right thing to save on drive D instead?

  When the D drive is full does that mean I can't use Drive F because there are 5 GB of mysterious data out there?

  When I bought the laptop with 500 GB... I thought there would be a drive with Vista and one for all my things. Instead I have not the slightest idea what drives to use and not use.

  On a separate issue... the Fn cards flash not working properly I have to start their manually whenever I want to show them on the screen. I used to be able to connect the laptop to TV, and then click HDMI icon and the output on the TV screen. Now I have to restart flash cards before you plug into TV or HDMI out icon does not work. I tried to disable at startup flash cards and then by restarting, but they still won't turn on automatically.

  Hi good

  Prior to starting us discussion offer us please some basic information.
  Purchased this laptop new or opportunity?
  Do you have the recovery DVD installation disc?

• How to replace the keyboard on Satellite P300 - 20H

  Hello!

  I just bought a replacemant for my Toshiba Satellite P300 - 20H keyboard and I was wondering how to actually replace it?

  Any response would be greatly apreciated,

  Thank you, Sophie x

  Video on [http://www.youtube.com/watch?v=UQaBRJoH-M0] (2mins in) you "lever" off the coast of the plastic band that runs across the top of the keyboard and remove the 2 screws. I expect that the connector of the ribbon cable must be of the type where a hinged band (diff color to the body of the connector) holds the cable in place. It appears if the cable is fired and you push it when the cable is inserted. There is normally a line on the cable to show that you have completely inserted the cable and the cable is inserted instead. -Examine the original cable until you remove

• Satellite P300 with XP hangs at the screen "starting windows."

  I recently bought the Satellite P300 - 01 and had XP installed on it. I have fixed all the problems except for the question, that I'm going to start.

  When I turn on the laptop it loads everything flashes on the login screen and then hangs at 'starting windows' screen If I turn it off and then again about three times this issue finally arrives with the login screen. There was an ASP.NET account, and after the BIOS update that he disappeared, but the problem is still there? Any comments would be greatly appreciated.

  Thank you

  > There was an ASP.NET account, and he disappeared after the update of the BIOS
  The whole story is really strange

  I put t know how you installed XP on this laptop and why an ASP.NET account was created or exist, but in your case I would recommend doing so again.
  Then install all service packs, hotfixes and patches of the XP!

  Simply show words on XP on P300.
  A friend of mine has installed XP on a P300 yesterday too and the XP works well
  Everything works fine!

• Satellite P300 - problem after BIOS update

  Hello
  I have:
  Satellite P300-20 b
  PSPCCE-05J011RU
  I updated my BIOS with this update of the BIOS of your site (30/04/09, 3, 40 - WIN version)
  My problem is:
  Loading and relocation of attempt of Windows, the following error message is fixed:

  "Technical information:
  STOP: 0 * 0000007 B(0*F78DE524,0*C0000034, 0*00000000, 0*00000000)'

  So I can't respond to a portable computer HARD drive, the HARD drive is defined in the BIOS.
  Also I checked the HARD drive on the virus, it's pure against viruses.

  Could you help me to update the BIOS to a working condition.

  Hey Buddy,

  This stop code means you use a bad SATA controller driver. The installation of XP, to integrate the SATA driver for install XP. There is a lot of discussion on this issue here in the forum.

  For Intel chipset, you will need to download Intel Storage Manager of Toshiba's official site and follow the instructions here to reinstall Windows with the SATA drivers:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  Solution replacement follow the instructions posted by peterk_1. Setting IDE mode instead of AHCI in the BIOS will help too :)

• Satellite P300 - output HDMI does not connect to the model of TV Samsung LE32B450

  When I use the Toshiba "HDMI" out utility to connect my Satellite P300 - 19K to my Samsung LE35B450 TV, I get the message "it is only effective when the PC is connected to a TV set that supports HDMI control via the HDMI cable.

  Does anyone have a solution for this? My Samsung TV is newer and has 3 HDMI input jacks and the same result. Is there another driver from Toshiba not requiring this vibration control function? This seems hardly reasonable given that all I want to do is display & there is normally no 2 communication channels via a HDMI cable anyway.

  Thanks in advance for any help there.

  I m not 100% sure, but I think that in s manuals is described clearly that this tool is designed for use with Toshiba Regza TV. With other words, it is Toshiba specific function.

  If you want to have the photo on your standard procedure for TV use for this purpose connect the laptop to your TV using a HDMI cable, turn on the port HDMI (HDMI channel) on the TV and use the combination of keys FN + F5 to switch between laptop and TV.