Satellite P300D-150 - Device Manager shows two graphics cards

Similar Questions

• Device Manager shows two different processors on Satellite P200 - 1 K 9

  Hello
  I just bought P200 - 1 K 9 and spotted (Vista 32-bit) Device Manager shows two different processors under the section of processors:

  Intel Core 2 Duo CPU T7300 @ 2.00GHz
  Intel Core 2 Duo T7700 @ 2.40 GHz CPU

  I expected to see the two excatly the same processors here.

  Vista recognizes in general CPU core 2 duo 2.4 GHz, BIOS too.
  What is on the Device Manager?

  Is there something wrong with the CPU? Should I return it better?
  Would you please check your processor in Device Manager (start-> right click on computer-> select Properties-> Device Manager) and let me know what you have?

  I'll start some live linux CD and check there too.

  Thank you
  Miroslaw

  Hi mate,

  the you´ve got problem is not a problem. It s just a simple bug in the Vista Device Manager and hardware abstraction layer.
  Follow these steps:
  Remove the CPU from the Device Manager (uninstall just like any other device) and then restart windows. The processor will be indicated correctly next time you reboot the system.

  Welcome them

• the Device Manager shows two processors

  My laptop Pavilion dv9543cl Device Manager indicates that there are two, rather than Intel Core 2 Duo CPU 7300 @ 2.00 GHz processors. It is clearly in original condition (i.e., HP Windows Vista, 32-bit with chips of memory 2 x 1 GB.) How should I treat this problem?

  Hello

  wilwon32 wrote:

  My laptop Pavilion dv9543cl Device Manager indicates that there are two, rather than Intel Core 2 Duo CPU 7300 @ 2.00 GHz processors. It is clearly in original condition (i.e., HP Windows Vista, 32-bit with chips of memory 2 x 1 GB.) How should I treat this problem?

  This is quite normal.

  The following image shows the PC that I use as a PC ACPI x 86 two processors. The two processors (Cores) are on a single chip which is the Intel Core 2 duo processor.

  

  Best regards
  ERICO

• Satellite A100-1AI watch CD player but Device Manager shows the DVD player

  I own a Satellite A100-1AI and went from Vista to Windows XP?

  My DVD player has been discovered as a HL-DT-ST DVDRAM GSA-T20N but is only showing as a CD drive in my computer screen.

  Also Device Manager shows Mass Storage Controller and controller SM Bus as an unknown device (other).

  Since the switch from Vista to XP I have not adjusted my BIOS settings

  How can I make my DVD see CD and erase those unknown devices

  Thanks in advance

  Spon

  Just a question;
  You can read and burn CDs?

  Regarding the unknown devices:
  These devices are only compatible Vista and so there is no drivers for the mass storage controller.

  Check this box:
  http://APS2.toshiba-tro.de/KB0/TSB83023N0000R01.htm

  + After the installation of Windows XP, there might be a yellow exclamation by a "PCI memory controller" or * mass storage controller * in Device Manager. +

  _Solution: _
  + This unit is probably the module of Robson former Turbo Memory. +
  + This hardware will only supported by Windows Vista. +
  + That is why there is no Windows XP drivers. +

  Greetigns

• Satellite Pro M50: Device Manager displays only 768 MB memory

  Hi all

  I have just rebuilt windows THAN XP on my Satellite Pro M50 and everything seems fine, except that before I reinstalled XP my device manager showed all my 1 025 Meg of memory.

  Now, it shows only 768 Meg. However, Information System shows all Meg 1 025. Any suggestions?

  Thanks in advance,

  Phil

  Hello

  I suppose that the memory was not upgraded. That I myself remember portable Pro M50 shipped with 256 MB + 512 MB modules.
  That is why I see problems with memory. It should show 768 MB.

  Hoe did you check the value of the memory in the system information?

• Device Manager shows no device, is empty

  My 8200 Dell under XP Professional SP3 shows not all devices in Device Manager.  I think that it started very recently when I was installing TM Internet Security after the removal of Norton Anti Virus 2009.  Eventually after using Norton Removal Tool. It doesn't show the devices safe.  Plug and Play is on.  I recently installed an old HP DeskJet 820Cse printer using existing drivers.  I do not think that article 953979 applies since it just (seem), took place but it seems to fit the description.  Any help is appreciated.

  There is a Microsoft 953979 patch that works, but it didn't on mine, I then found this articale and followed the instructions and it worked.

  (1) logged as an administrator;
  (2) Regedit > HKLM\SYSTEM\CURRENTCONTROLSET\ENUM.
  (3) right clicked Enum and gives right to the system and administrators full control.
  (4) clicked the button Options at the bottom of the window.
  (5) on the Advanced window checked 'reset permissions on all child objects... ". »
  (6) the deleted Enum key. Error message: error while deleting key. I had to remove this key twice because initially, it appeared the remains of Enum key. After that, the locked ENUM\ROOT\LEGACY_SSDPSRV who already had a lot of weird symbols example $% &' () * +-, etc., now gone. Registry shows an own ENUM\ROOT subkey.
  (7) PC rebooted and back connected to Windows;
  (8) window of the Device Manager showed some yellow exclamation not to mention that some devices not recognized, then refreshed a few times showing successively less then not many of these features.
  (9) PC rebooted again;
  (10) message screen saying according to Windows has finished installing new devices, and the computer must be restarted before the new settings take effect.
  11) Yes to restart the computer

  Now the Device Manager window is full and all devices running again!

  This solution works for my situation. I hope this helps someone.

• The Windows Task Manager shows two instances of HpqPhUnl.exe running under XP

  My windows Task Manager shows two instances of HpqPhUnl.exe Runnung.

  * original title - why do I have two HpqPhUnl.exe race? *

  Are you using the quick change of user with more than one user connected and are both instances of HpqPhUnl.exe running under different user names?

  Although it is always possible for malware to masquerade as a legitimate file, HpqPhUnl.exe is related to the HP Photosmart Essential software provided with printers HP all-in-one.

  It seems there were several problems with Photosmart Essential and HP has replaced with HP Photo Creations.  HP claims, however, that he "supports" always Photosmart Essential.  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02475046&lc=en&dlc=en&cc=us&product=3857372

  If you have any problems and you're just curious, I suggest you leave the pretty well after scanning with the following just in case two free tools:

  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  If you experience problems with your HP software - and the scans do not present any malware - I suggest to ask in the forums HP (there are 3: consumer, Business and IT resources.)

• HP ZBOOK 17 Mobile Workstation: disable one of the two graphics card

  There are two graphics cards in my laptop - Intel HD 4600 and NVIDIA Quadro K1100M. The Intel HD crashes and the error message is "driver Intel HD Graphics for Windows to display 8 (R) stopped... ».  I wonder if I can safely disable the Intel HD card via Device Manager and just use the NVIDIA card? Can someone give me some advice?

  Go to the BIOS

  Select Advanced

  Select Device Configurations

  Find graphic hybrid

  Select Disable

  Click Save

  There are the BIOS

• Satellite A110-275: more a low-memory graphics card after BIOS 1.30 update

  Hello

  I am the owner of:
  Satellite A110-275
  Part number: PSAB0E-00T00TEN
  graphics card intel gma 945 up to 128 MB.

  Recently, I updated the bios of 1.20 to 1.30 and after reboot, I lost 64 megabytes of 'graphics card capabilities.
  After bios update, my computer is much lower. Why? How can one get 128 MB of memory on my intel gma 945?

  also s it is possible to manually change a file and configure gma 945 capacities up to 256 MB? I have a lot of ram and I could use it for games, now I can use only 8 to 64 MB.

  Concerning
  Piter

  Hello Pit

  I posted my opinion that I don't think there could be a problem in your second topic.
  As far as I know the laptop came with graphics card Intel shared memory. 8-128 MB of memory could be chosen.

  To my knowledge the Intel driver graphics card automatically controls the value of memory sheared. If need more than MB of graphics card memory so it will be assigned automatically.

  PS: In my opinion it is not possible to select 256 MB because the hardware does not support.

• Don't I have two graphics cards on my laptop sve14a27cxh

  How will I know if I have two graphics cards on my laptop sve14a27cxh?

  Hi Richard,

  Yes, the computer model SVE14A27CXH is installed with map two graphic. You can confirm this by changing the settings of graphics performance following the steps here: http://esupport.sony.com/docs/pc/SVE14A2_series/EN/contents/04/06/02/02.html?search

  Note: If my post answered your question, please mark it as an "accepted Solution".

• Satellite P30 - error code 43 on the graphics card in Device Manager

  Windows Vista Professional Edition loaded as my new OS for the studies and course work. Now my display driver no longer works correctly.

  Device Manager displays the following message on the graphics card ATI Mobility Radeon 9600/9700: 'Windows has stopped this device because it has reported problems. (Code 43) »

  Have search everywhere on the web for solutions but limited knowledge prevents me to get a positive result. There must be someone out there who can help...

  Hi BigPappaDom,

  In my opinion to get rid of this, you need to reinstall the display driver. I have checked the site of Toshiba Satellite P30 is no Vista driver available. This means that you must find yourself to get all the drivers. :(

  I searched a bit and you should try to install the Satellite P200D display driver. She also equipped graphics card ATI and this driver must be compatible with your other oldest:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  Laptop > Satellite > Satellite P Series > Satellite P200D > display driver

  Check this box!

• Satellite A100-797: Vista Device Manager show different CPU speeds

  Hi all

  I had an an A100-797 with Vista Home Premium 32 Bit and I was cruising along the system properties. Via 'Control panel system->' I saw the spec CPU as

  Processor: Intel (r) Core (TM) 2 CPU T7200 @ 2.00 Ghz, 2.00 Ghz

  Then I checked the CPU the Device Manager section, he showed me two CPU

  Intel (r) Core (TM) 2 CPU T5500 @ 1.66 Ghz
  Intel (r) Core (TM) 2 CPU T7200 @ 2.00 Ghz

  Do you think this is normal?

  Hello

  Check this http://support.toshiba-tro.de/kb0/TSB6C01O70000R01.htm

  Good bye

• Tecra M2: XP Device Manager shows 4 yellow exclamation points

  Hello

  I had too to recharge my laptop with XP and have 4 devices in the device with the yellow exclamation point Manager.

  Ethernet controller
  Network controller
  Unkown
  Multimedia audio controller.

  I have havetried to install drivers WITHOUT success.
  I have tried loads yet joy o,

  I'm missing something.
  Can someone help

  Hello

  I'll try to identify the devices without plug & play id, but I can't guarantee anything.
  If something is wrong please post the PnP - ID (Device Manager-> properties-> details-> ID devices material).

  Ethernet controller is Intel Pro/100 VE or Intel Pro 1000/MT (both have been integrating M2) network adapter
  http://support.toshiba-tro.de/Tools/updates/LAN/LAN-XP-8790.zip or http://support.toshiba-tro.de/tedd-files2/0/lan-20070912134727.zip

  Network controller is Intel Pro Wireless 2200 GB or 2100 (same as above, both were build most of the cases. Others like too Atheros and Cisco, but not so often)
  http://downloadmirror.Intel.com/13000/Eng/11.5.0.0_xDrivers.zip or http://downloadmirror.intel.com/11918/eng/Intel (R) PROWireless21_125836.zip

  Unknown device of infrared
  http://support.toshiba-tro.de/tools/Tecra/TM2/XP/IrDA-TM2-XP-5125000.zip

  Multimedia audio controller is the SoundMax
  http://support.toshiba-tro.de/tools/Tecra/TM2/XP/sound-TM2-XP-512015160.zip

  Please allow me two questions:
  Why don't you use the recovery media. It is much easier?
  Have you tried to install any driver Toshiba driver page? http://computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• XP Device Manager shows me 'PnP BIOS Extension' with a yellow top flag

  I tried to load the new software for an HP printer and it would not load correctly. I checked the Device Manager to see if the USB port has an error, but instead I see an icon with a yellow flag on it in "System devices". The name of the icon is 'PnP BIOS Extension'. I just click the mouse over it to see the Properties , and there are three tabs: general, pilot, Details

  the device status window general tab has this message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39).
  
  
  Driver tab, it says:
  Driver provider: unknown
  Driver date: not available
  Driver version: not available
  Digital signer: not digitally signed
  On the Details tab, it says: ROOT\SYSTEM\0003
  I tried the driver but it failed with the message: the hardware was not installed because the wizard cannot find the necessary software.
  
  
  Can someone help me understand how to fix this problem?

  Well you can right click on it, select "update driver..." Or, try to update the

  Hp BIOS, if its current, you may have a defective battery on board, it would be

  give some data, but perhaps not all, anytime, cold weather brings on battery

  and the questions of the bulb... Also, try to update the software of the chipset advice, get it from its

  MFG (intel, amd, etc.), which gives the ability to run hardware tips xp...

• Device Manager show that this driver may be corrupted or missing (error code: 39) on CD/DVD devices

  Device Manager has a yellow ball with an asterisk on the CD & DVD devices.  My computer does not display a device.  The Device Manager has a message that the driver may be corrupted or missing (Code 39).  It happened after uninstalling Norton and McAfee installation.  I uninstalled McAfee and tried to install the drivers.  I uninstalled and reinstalled the device.  Still no CD or DVD displayed in my count.  Everybody recognizes the problem?

  Original title: CD & DVD devices do not work

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.