Satellite P300D-h-13: Bluetooth no longer works after update BIOS 3.30

Similar Questions

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Reference Dell 375 Bluetooth no longer works after update Windows 8, R296919, blocked by the Compatibility Assistant programs - how to fix

  Hardware: Dell laptop with adapter Bluetooth 375 Dell running Windows 8

  Problem: after Microsoft Windows 8 update, all Bluetooth devices stopped working.  Moreover, they could is more to be discovered to pair them up.  Device Manager showed all works very well.

  Failure of attempts to repair:
  -Uninstall all components of Bluetooth in the Device Manager and analysis of the material changes.
  -Uninstall Dell 375 in programs & features (WIDCOMM Bluetooth Software) in order to reinstall (R296919).  The installation was quickly blocked by the program compatibility Wizard.
  -With the Dell software uninstalled, I thought that perhaps that it was no longer necessary, and so Microsoft software would work.  Yet once, I uninstalled all Bluetooth components in the Device Manager and analysis of the material changes.  Still could not pair.
  -Check in Bluetooth services and services were running.

  What worked:
  -Run GPEdit and go to the compatibility of the components/Application Computer Configuration / Administrative Templates/Windows /.
  -Enable the following:
  Remove Program Compatibility Property Page
  Turn off Application compatibility engine
  Disable the program compatibility Wizard
  -Run services.msc and stop the process of Bluetooth
  -Extract the R296919 in a directory
  - on R296919.exe and select run as administrator
  -For me, the installation failed the first time.  Then I repeated it, and it was installed fine, but required reset, which I did.
  -At this point, I was able to pair Bluetooth devices again.
  -Open Device Manager and go to the Bluetooth Module Bluetooth/Dell Wireless 375.  and select Properties.  Click the power management tab, and uncheck "Allow the computer to turn off the device to save power" and press OK.  If you do not perform this step, you will have all kinds of problems with Bluetooth devices, including keyboards and mice.
  -Reverse changes in GPEdit to not configured.
  -Reboot

  How to avoid the problem:
  Microsoft has an updated driver that States it is for the adapter Bluetooth of Dell 375.  on the update and select Hide update.  Microsoft has had quite a few black Tuesday lately, and this update is just another example.

  The above post started as a question.  While typing what has not worked, I developed the answer.

• My Equium L40 no longer works after update BIOS!

  Hi friends...

  Please, I need a help.
  I updated my computer laptop bios v2.00 v1.60 and after that it no longer works.
  When I try to turn it on nothing happens.

  Maybe I need the original BIOS.

  Who has a solution? What can I do?
  Could someone help me?

  Thank you!

  My laptop is a series of Equium L40 - PSL49E - 156

  Hello

  I can tell what you have to do now
  You will need to contact the ASP in your country for assistance

  Yes, you have the technician ASP.
  I assumed that the ROM module where the BIOS is stored has not properly been flashed.
  I think that the ASP will try again by using a special version of the flash BIOS

  Good luck

• Satellite A300 - Touchpad no longer works after update BIOS

  Hello

  After the upgrade of the bios of my Satellite A300-1NJ version 1.70, the Synaptics touchpad stopped working at all!
  (I tried with ubuntu liveCD check is not a driver problem)

  Older bios is no longer available from Toshiba Web site!

  How can I solve this problem?
  And thanks for the help.

  Hello!

  The touchpad can be validated with FN + F9.
  Check it!

  In addition, try to use an external mouse. It work?

  Good bye

• Bluetooth no longer works after update to OSX 10.11.2

  After the 10.11.2, update Bluetooth stopped working. I rebooted without effect. I have the Bluetooth icon with the tilde by stating that there is no Bluetooth and I have no Bluetooth menu in system preferences. What should I do to fix this?

  I solved it. I stopped and unplugged all the USB devices for two minutes. I plugged into the keyboard and restarted and reset the NV - RAM (now command, option, p and r). Upon restart, Bluetooth was working again.

• CD/DVD no longer works after update BIOS of yesterday

  HP Pavilion dv7-6b55dx

  Win 7 64 bit

  I solved the problem with the audio that created the update, but now to discover that my DVD/CD is unusable.  I don't see the driver available to replace it.  Tried to reinstall the driver I have on my PC and got the error message

  Windows cannot start the hardware device because its configuration (in the registry) information are incomplete damaged (code 19)

  Help, anyone?

  Endy9 wrote:

  I tried a DVD player USB which also cannot use the info registry now damaged on the DVD drive external.  Do you really want everyone (I've seen dozens of messages on bulletin boards, and it's just what I've seen) to believe that it is a coincidence that immediately after installing this BIOS update hardware failed and corrupt just pilots themselves.  Please, I beg you.  We have an adult discussion about this.  The process of updating these registry settings can be affected if the real drivers belong to HP or not.

  If you notify me that I reinstall the BIOS (guess I can do no harm, since I already have downloaded audio drivers to reinstall) the registry information for my DVD will be fixed?

  BIOS do not affect or touch the registry somehow and there is no need to relocate the BIOS but you can reset the default BIOS. You could link me to these forums you're talking and if not. cases are of a scale that is having the same problem, the update of the BIOS can be studied.

  Since you said that even an external DVD drive is also not recognized its certainly a matter of s/w.  Could try to use a restore point was working on your dvd player? I know that you did a restore to a date before you installed the update to the BIOS, but you can try a diff. one?

  In addition, you can restore your BIOS downgrade (F2-System Diagnostics) If you feel/think the BIOS update is a cause of the problem.

• URL Bar Search no longer works after update and no research options available!

  URL Bar Search no longer works after update and no research options available!

  "URL Bar Search" which is an extension? Or are you referring to the address bar, sometimes called the address bar?

  Let's try a few basic trounleshooting.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click on the menu button , click Help , and then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  Let know how's going on.

• Location (GPS) service no longer works after update of Os 9.3.2

  My GPS service does not work after update os on IPHONE 6 64 GB. Deleted, hard reboot as well os re - load os, I did, but still unresolved question and google Mao or Apple card does not. It seems that many Iphone user have the same problem after the Os update to 9.3.2.

  My wife also have the same model and updated to Os, but its Google map works perfectly. have online search of dome on the solution, but no luck.

  How to solve this problem?

  Hello, jayantg,

  Thank you for using communities of Apple Support.

  I see that your GPS service stopped working after the update to iOS 9.3.2. I use location Services on my iPhone, so I know how much it is important that we get this problem is solved. I have something I want you to try.

  Job to the subject of privacy and location Servicesand ensure that the location service is enabled and learn how the precision of GPS to improve, in particular, these two sections:

  Enable or disable location Services

  You can enable or disable location Services in settings > privacy > location Services. You can enable location-based Services during the wizard process of installation or later through the creation of location-based Services. You can individually control applications and system services have access to the data of location Services. When location Services are disabled, the apps can't use your position in the foreground or background. You will thus limit the performance of various Apple and third-party applications.

  

  Settings > privacy > location Services.

  

  Settings > privacy > location Services > System Services.

  Improve the accuracy of GPS

  GPS accuracy varies according to the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. Follow these tips to improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
    Important: Incorrect settings on your computer can sync to your device. Check the date, time and time zone on a computer that syncs with your device.
  • Restart your device.
  • Make sure you have a cell phone or Wi - Fi network connection. This allows assisted GPS (A - GPS) on the device to locate the fastest visible GPS satellites, in addition to providing information about the initial location using Wi - Fi or cellular networks.
    Microcells (sometimes called Femtocells) are not supported with location Services.
  • Keep a clear view of the horizon in several directions. Please keep in mind that walls, vehicle roofs, tall buildings, mountains and other obstacles can block the line of sight to GPS satellites. When this occurs, your device will automatically use a Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  All the best.

• HP Total Care Advisor no longer work after updates

  advising HP total care stopped working after updates running... tried to reinstall the software nothing works.  I get the following error...

  HP ADVISOR HAS STOPPED WORKING CORRECTLY, WINDOWS WILL CLOSE THE PROGRAM AND NOTIFY YOU IF A SOLUTION IS AVAILABLE.

  http://h30434.www3.HP.com/

  HP's Support Forums at the link above.

  http://welcome.HP.com/country/us/en/contact_us.html

  You encounter a problem with the software of HP, try their Forums, or contact HP directly at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite S50-B-15F - Touchpad does not work after update of Windows 10

  Hello

  Yesterday, that I've updated my S50 B 15F Satellite with Windows 10. Now the Touchpad no longer works. Tried enabling in the settings. This works except for the left and right buttons. I reinstall the software momentum but no change. Any ideas how to solve this problem?

  Thank you!

  Joram

  Here another thread where the issue could be resolved:
  https://Forum.Toshiba.EU/showthread...-to-Windows-10

• Paste function central to the mouse no longer works after update

  I think that FireFox has been updated last night. Since then my central block the mouse function no longer works.
  I have not installed any addons or changed settings either.

  I want to talk to: subject: config > middlemouse.paste = true

  I tried it switch etc but nothing I can do, it takes. Any ideas?

  This problem has disappeared from Windows updated itself.

• Logitech's ' back' button no longer works after update 6.0.2

  The navigation buttons (back and forward) on my Logitech mouse worked correctly in all versions of Firefox, I used it, including 6.0.1. I've just updated to 6.0.1 and the buttons no longer work. I tried Opera and Internet Explorer, and confirmed that the buttons work properly with these browsers.

  Hmm...

  I had this problem on 6.0.1.

  And then I decided, since I already have the problem, I'll just upgrade to 6.0.2 and see if it works.

  The same problem.

  And then some powers-that-be, the problem fixed itself.

  (person but me using my computer, so I have absolutely no idea of what I did to fix.) Maybe after restarting the computer).

• HP Solution Center no longer works after update of HP Officejet J6480

  HP will provide an update to fix this problem?  If anyone has had the same problem (if so, how fixed?)?

  HP has pushed down the updates on a week earlier for my HP Pavilion Elite e9270f running Windows 7 64 bit home and domestic all-in-one Officejet J6480 which are connected wirelessly via my network.  HP Solution Center had worked for several years until then, but now can no longer connect to the J6480 with all the features.  Devices and printers in Control Panel displays the connection.  HP HPHNDU.exe utility displays the connection.  Print from works of MS Office products as ok HP Solution Center no longer works.  I can't scan documents to the PC (that it is pulled by the PC or pushed by the J6480).  I used http://support.hp.com/us-en/document/c02266743 instructions and the software of HP Officejet and Driver Removal Utility OJJ6400_Scrubber_13.exe to remove all aspects of the printer and the software.  Then reinstall them using (with HP printer install wizard HPPIW.exe), but the new installation also fails linking the center of solutions HP (printing still MS Office programs).  According to me, it is a plague of HP inflicted that should have a solution from HP.  FG 120201

  Hi MFredV & 2015,

  Sorry to hear you've had the problem with the printer after you run the update. Please follow the steps below and let me know if you continue to have problems?

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635378&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635378&sw_lang=

  10. run the download to reinstall the printer

• Acceleration GPU Mercury Playback no longer works after update

  I just updated all my Adobe software for the first time since getting my new workstation and my Mercury GPU acceleation no longer works (software only). I run a GTX 670 (version 9.18.13.697 driver) and Premiere Pro 64-bit (version 6.0.3).

  Any suggestions? It literally happened in the middle of a project just today and I am puzzled.

  --

  Stephen

  Re-apply the 'hack' in your cuda_supported_cards.txt file.