Satellite P300D - h - 13 PCI in conflict

Hello!

Some info:
OS: win Vista Home Premium 32 bit
BIOS: 3.30 - WIN

After one of the windows updates after I restarted my laptop I get errors:
--------------
ERROR
Resources - Bus controller conflict series PCI on the motherboard
Bus: 09, device: 01, function: 00
ERROR
Resources - Bus controller conflict series PCI on the motherboard
Bus: 09, device: 01, function: 01
ERROR
-Conflict PCI on the motherboard resources
Bus: 09, device: 01, function: 03
--------------

With F1, I just confirm and the system to boot normally. But then I realized that firewire card and multi drive no longer works. I checked under devices and I have problems with the following devices:
----------------
IEEE 1394 Bus host controllers
-OHCI Compliant IEEE 1394 Host Controller (not enough resources)
Other devices
-Conroller of memory PCI (no driver installed)
-Controller of Bus SM (no driver installed)
----------------

I tried to:
-cancel the last windows update,
-load the bios default
-reset the bios with remove the battery from the motherboard and waited for 1 hour
-the latest version of the bios reflash,
-Reinstall everyhing Rescue CD.

Nothing helps. Errors are always present.

Y at - it something more, that I could try o or is it the failure of the motherboard?

Kind regards
Sasa

> Is there something more I could try o or is it the failure of the motherboard?

Well, if you have already tried to restore the system using the disk recovery Toshiba (your written you already tried this procedure) and this did not help to resolve the issue, the problem could be linked to the fault of the motherboard.

The resource conflict error message indicates that certain devices (part of the motherboard) causing the problem.
In your case, it s PCI Serial Bus controller.

From my point of view of the few there are not many options for repair.
I think that the motherboard must be replaced. :(

Tags: Toshiba

Similar Questions

  • Satellite P300D - 12L and PCI standard ISA bridge driver

    Hello!!!
    I just installed win XP on Toshiba Satellite P300D - 12L with all the drivers, but I have a problem. In the Device Manager on the "other devices" the foud of windows 'network controller '. In my view, is the standard ISA bridge PCI (PNP ID VEN_1002 & DEV_439D & SUBSYS_00000000 & REV_00). I search for the driver on the internet but without success.

    PLEASE HELP ME!

    THANKS IN ADVANCE

    BOBDAN

    Have you installed the LAN and WLAN cards successfully?

  • Some drivers Win XP for Satellite P300D - 21K necessary PSPD0E

    Hello

    I'm trying to put Windows XP on my Satellite P300D - 21 k PSPD0E. I've successfully installed and download all the drivers from the Toshiba site... but I still have an IEEE 1394 controller, Ethernet controller and PCI device no drivers in Device Manager.

    I think that these usually come with the chipset drivers?
    They are not on the site of anywhere... and assume that they are not part of the update of the BIOS (I didn't run it because I have a double partition).

    Any ideas for help would be muchly appreciated.

    Owen

    > However I still have IEEE 1394 controller, Ethernet controller and PCI device no drivers in Device Manager.

    Ethernet controller seems to be LAN or WLan card and would recommend the LAN and WLan driver installation.

    The wireless network card seems to be Atheros.
    Here you can find the WLan drivers:
    http://APS2.toshiba-tro.de/WLAN/?page=downloads

    LAN chip is Marvell and the driver is available on the European driver Toshiba page. If you have not installed this in the past, then do it

    Do not know what could be the another PCI device, but you can find it easily by using this work around:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

    The IEEE 1394 controller seems to be firewire port.
    Since the laptop seems to be equipped with a graphics chip ATI chipset driver is the graphics driver.
    The graphics card driver folder (once it has been unpacked) contains the SBDrv folder.
    You can try to install the driver through the Device Manager pointing to the files in the SBDrv folder

    Good luck

  • WinXP Conexant Sound/Modem satellite P300D driver problem

    Hello

    I have a strange problem with my Installation of XP. I had to reinstall XP two days ago because there no periodically starts.

    In any case on my new install, I can't install THE Conexant drivers, who would be the modem and audio driver. I need the modem, so this isn't the important point, but the sound is annoying. I've been trying several drivers I found on the internet but none work, they all complain to the facility, there is that no devices found which would correspond to the driver.

    The strange thing is that I was able to install these drivers, when I installed XP about 3 weeks ago... I have no idea what the problem is now.
    Both devices are displayed as "PCI Device" in Device Manager. What is interesting is that the Instance ID of the devices device do NOT correspond with those who are in the files of the driver... maybe a problem with the chipset drivers, who pack things?

    Any advice?
    Thanks in advance :)

    Satellite P300D-13N PSPDCE

    Have you installed the chipset drivers?

    Are all the other devices in device not installed Manager?

    Have you downloaded the correct driver for the P300D, not the P300?

  • Satellite P300D-14 and Win8 - cannot install optional update

    I have a Toshiba Satellite P300D-14th with Windows 8 Pro.
    Hard drive is not original (all 2 disc HARD original died)-now this is Seagate Momentus ST9500325AS.

    In the updates of Windows, I put in optional day - + AMD - storage controller - AMD Sata Controller +.
    [https://s017.radikal.ru/i408/1305/ee/0874c8831d27.jpg]
    I try to install it, then mobile must be restarted - I do restart, load until Windows starts... and restart again, and then it displays the message that it could not start Windows, than restarting again and Diagnostic Utility starts.
    This notice of restore (restore point). I do restore and the laptop starts as usuall.

    So, question is - why I can't install this update? and is there a solution (except do not install).

    P.S.: Sata remains AHCI in the BIOS for the controller.

    P.P.S.: drivers I found (thanks to Everest (AIDA64)):
    (1) standard dual channel PCI IDE Controller, driver date: 21.06.2006, driver version: 6.2.9200.16548
    (2) standard SATA AHCI Controller, driver dat: 21.06.2006, driver version: 6.2.9200.16548
    (3) controller storage in the Microsoft space, pilot dat: 21.06.2006, driver version: 6.2.9200.16548
    (4) ST9500325AS, driver dat: 21.06.2006, driver version: 6.2.9200.16384

    > So, question is - why I can't install this update? and is there a solution (except do not install)

    From my point of view, there will be a compatibility problem.
    The P300D is a little older and you use Win 8.
    AFAIK P300D isn t Win 8 supported... of course, this does not mean that you can not use Win 8 on this unit, but it might be possible that not all drivers are fully compatible, however, it's just an idea

  • Satellite P300D-130 - some drivers are missing on Vista 64-bit

    Hello, I own a Toshiba Satellite P300D-130, model serial PSPDCE-000009FR, 78055027.

    I installed Windows Vista Edition (letters) Home premium 64-bit.

    Since this installation, no network adapter is detected, nothing appears in the administrator of ring road (ring road) of the NIC (map).

    In addition, there is a category in the ring road (peripheral) administrator the other roads (peripherals) of the ring "with ring 4 roads (peripherals) pilots (drivers) who are not installed (code 28):"
    -Mass storage controller, identification of hardware (equipment) N: PCI\VEN_1217 * DEV_7130 * SUBSYS_F F501179 * REV_01
    -Ethernet controller, N to identify material: PCI\VEN_11AB * DEV_4355 * SUBSYS_FF501179 * R EV_12
    -ring unknown road (peripheral), N to identify material: HDAUDIO\FUNC_02 * VEN_14F1 * DEV_5051 * SUBSY S_1179FF50 * REV_1000
    -ring unknown road (peripheral), N to identify material: USB\VID_0BDA * PID_8197 * REV_0200
    Finally, the graphics card is reported:
    -Standard VGA graphics card, identification of material PCI\VEN_1002 aboard N * DEV_9591 * SUBSYS_FF501179 * R EV_00 with a code 10 indicating that it cannot start.

    I downloaded the update to the BIOS for Vista 64 on the Toshiba site, but nothing has changed.

    Thanks for votrre help.

    Hello

    It seems that some drivers are missing on your laptop. ;)

    To solve the problems, you must download and install the drivers on the Toshiba site. You will find all the drivers for your Satellite P300D:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    If you have any other questions, please let us know!

    Welcome them

  • Satellite P300D-13N and Installation of XP problems (Sata driver)

    Hello

    I have some problems with my XP Downgrade.
    I tried to integrate the Intel Storage Manager driver in my XP CD, but unfortunately it did not work.
    Probably because I've been incorporating all THE drivers, who were available, not only who should work for my chipset.
    Anyway, in one of the threads of this forum, there is a link to [THIS how-to | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm] and I think I found my problem...

    [Here: http://s5.directupload.net/images/080904/2eptrpzs.jpg] is a screenshot of my (sorry to make it in German) Device Manager preinstalled Vista.
    As you can see, there is no information about the Version of controller.

    So my question is, WHAT chipset is built into my laptop, because it is due to the fact that Intel drivers do not work AND there is no information on any Intel-inverter speed, I have no idea, I have to integrate into the XP CD to get my XP Installation working drivers. :(

    Help :(

    Thank you

    Laptop: Satellite P300D-13N PSPDCE

    Hello

    According to the specifications of the laptop, your laptop has an AMD RX780M chipset. Processor is AMD Turion Dual Core RM - 70 (2.0 GHz).

    I hope this info will help you.

    Good bye

  • Satellite P300D - 15 c is very slow to start WMI

    Hello

    My pc (Satellite P300D - 15 c) is very slow at startup.
    When I look in the newspaper, there is a WMI wich tooks 2 minutes East service delivered with an error.

    After that, my pc on the screen fr jumps 'welcom' starts normally.

    So I turn the WMI service, but that there are other mistakes after the full boot (tosipcsrv.exe close).

    Is there another type of solution, except turn the WMI service?

    Sorry for my bad English,
    If you can answer me in Dutch or English basic ;-)
    With sincere friendships.

    Johan Nijsse

    Here's the (Dutch) log of the WMI problem:

    Logboeknaam: Application
    Bron: Microsoft-Windows-WMI
    Reference: 2009-04-06 22:52:53
    Gebeurtenis-id: 10
    Taakcategorie: Geen
    Level: who cares
    Trefwoorden: Klassiek
    Gebruiker: Derby
    Computer: PC_Fam_Nijsse
    Description:
    Gebeurtenisfilter met query SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99 kan niet worden van naamruimte //./root/CIMV2 vanwege opnieuw doing 0 x 80041003. Mogelijk worden er geen gebeurtenissen via said thing totdat het clean filter is corners.
    Gebeurtenis-XML:



    10
    0
    2
    0
    0
    0 x 80000000000000

    1961


    Application
    PC_Fam_Nijsse



    ./root/CIMV2
    SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99
    0 x 80041003

    Very good thread on slow start up you will find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947

    It will be interesting for you.

  • Satellite P300D-110 does not recognize the 9 cell battery

    Can someone help me with a bios version of work?

    Running v2.80 with 32-bit vista, in this configuration, the battery is not recognized. I read in a German forum I need v3.00 or higher there is no newer version on the download section that works on vista 32 bit.

    Hi mate

    Your laptop P300D-110 belongs to the series of PSPD4E.
    For this series, you will find only 2.80 BIOS.
    There are other satellite P300D as PSPD8E or PSPDCE series.
    3.30 BIOS is available for this series.

    I think that the problem is not related to the BIOS if you had no problems in the past, so I think that your battery is defective.

  • Satellite P300D 10V - problem with TV OUT

    Hello!

    I have a card ATI HD3650 in my Toshiba Satellite P300D 10V model and I can't use my TV out!
    It does not work! How to start!

    I use a newer driver of origin! With the previous driver output TV not too worked!

    Kind regards!

    Hello

    The laptop seems to support a 4pijn s-video port and HDMI port.
    Which port you use to connect to the TV?

    You can use both and it only depends on the available on television port.
    Choose the right channel on the TV and then use the FN + F5 key combination to switch to the TV out.

  • When I touch my Satellite P300D support component turns

    Hello

    I got my Satellite P300D for awhile now however when I try to clean up when its been turned off and I have spend my sheet over the media group above keyboard turns itself on which is annoying when you're trying to clean it up.
    No one knows how to stop it turning I would decide when to turn it on lol

    Any help gratefully received

    Kind regards

    Alan

    Hello

    Since when did you notice this problem?
    Have you installed the latest version of the BIOS?

    On this behavior, I found a similar thread:
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=231754

    So I can say this normal behavior of s is on when you press the button mute.

  • Screen keeps freezing on Satellite P300D

    Hello everyone,

    One of my friends has a Toshiba Satellite P300D - 15 c and its screen keeps freezing (stripes, colors).

    It happens randomly and he told me that the laptop is pretty hot.

    Known problems with this? Memory failure? Out of the video card?

    Yours,

    Stef Broere
    ISize
    T: + 316 3893 4404
    E: [email protected]
    W: www.isize.nl

    Hello

    > he told me that the laptop is pretty hot.
    No doubt, in this case due to a higher internal temperature
    Your friend is already cleaned the laptop?

    There is an interesting article in the forum on the Toshiba laptops cooling system cleaning:
    [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

    Check this box!

  • Bug BIOS on Satellite P300D-136

    Hello.

    I bought a Satellite P300D-136 and update BIOS version 1.90, but power management does not work.

    Vista and Ubuntu 8.04 has been reported to me by inability to change the frequency of my turion x 2 ultra zm-80, so it stucks on 2.1 GHz, even when not used...

    What can I do?

    And what's with the power management?

    You write about Vista or Toshiba power management?

  • Satellite P300D-13 has (PSPDCE) - downgrade to Windows XP SP2 from Prof. - pilot

    Hello, first of all, I come from Germany and I hope you understand my problem...

    I bought last week it really useful for computer laptop Satellite P300D-13 (PSPDCE) and have now a few huge problems...

    I have download all the drivers of P300D Series for Windows XP and also installed the display driver.
    My problem is that the sound is not as good as on Vista. He did not get the right sound for me... Is this a driver problem? But I can listen to the sound...

    Another problem is that Windows XP found SM Bus controller, but cannot find a driver for it.

    I know it was a big mistake not to burn a DVD of VISTA recovery but I have all the files for recovery on a separate disk DVD. If I have the Toshiba recovery software can I make a DVD of recovery with the old files of Vista on Windows XP? If all goes well, there is a solution...

    I don't like Vista, it's like a very expansive toy for me. So I decided to install Windows XP Prof. SP2...

    I hope someone can help me...

    Regarding the noise I suggest you to check the website of conexant for some newer drivers, maybe they could improve the 'sound quality' of your audio output.

    The SM-Bus is part of the ATI chipset and install it that you only have to google for "ATI SMBus" that returns thousands of links to driver ATI SM - Bus.
    With the recovery it s not so easy because the file structure on the recovery partition is not similar to the image of final recovery on the recovery CD.

    I suggest to make a picture of your XP, recover your machine with the recovery of HARD drive, burning media, and then copy the picture from your previous installation of XP on the C: drive. I know it sounds a bit like much work but it s worth. :)

    Welcome them

  • Satellite P300D-110 integrated webcam does not work properly.

    Hi all

    as the title suggests, the webcam built-in in my Toshiba Satellite P300D-110 does not work correctly. Allow me to explain. Using the camera Assistance software I can take pictures and record music. If I try to record a video preview screen comes black and the end result on black, pitch black aswell tuns.

    Whenever I try to use my camera with applications such as MSN Live Messenger, Skype or on community websites, using Firefox, Internet Explorer or Safari the app crashes.

    * How what happened? *

    You tell me. That's how it happened;
    * 1st day: I booted up my laptop and looked at my installation fresh and clean Windows vista Home premium. I tried my webcam using the webcam support software and it worked like a charm.
    * Day 2: once I start my laptop and try to start my webcam only to find out that he is no longer functions.
    To give a quick summary of the thread;

    Help of camera Assistance software provided by Toshiba, can I take pictures.
    Help of camera Assistance software provided by Toshiba, I can record the sound.
    Using camera Assistance software provided by Toshiba I can _ * NOT * _ save or preview of a video.
    * I can't start my camera using any other application such as, but not limited to; MSN Live Messenger, Skype, Mozilla Firefox, Internet Explorer and Safar.
    * I downloaded and isntalled the latest drivers on the Toshiba site.
    Portable listen is on a weekday.

    I'm not sure what more I can do, all I want is for the webcam works, if someone can help me please do.
    And if possible WITHOUT having to reinstall Windows Vista Home Premium.
    I have not yet used and would not do as a solution to all the problems that might occur in the future.

    Sincerely,

    a sad customer.

    Camera Assistance software using provided by Toshiba I can't save or preview of a video.
    Can you please describe the steps how you try to do this? I have to ask you this question because it works fine on my laptop. When the recording is finished Player opens and you can see saved the film. This is the avi format and at the top of this player, you can see the path where the film is recorded.

    Strangest thing for me, is that you can not use it with Skype. OK for MSN is not perfect, but there is absolutely no problem with Skype. Make sure the settings and it should work somehow.

Maybe you are looking for