Satellite P35-S609 - new HDD not accepted

Hello

I am trying to install Windows XP (toshiba recovery CD) on a new hard drive Samsung HM160HC (160GB) on a Satellite P35-S609 but once the CD format the HD and copy all the files on the hard drive (to start installing XP) laptop does not boot from the hard drive, someone has an idea?

Obviously, the drive has no flaws, perhaps the bios V1.4 takes not more than 100 GB HD or I don't know if this is the limitation of Windows XP, the thing is he isn't still trying to start the start of HD - anyone have any idea?

my email:
[email protected]

Hey Buddy,

Your new HARD drive is recognized in the BIOS?
You can install Windows on another drive?

Satellite P35 has old IDE interface and generally it s limited to 128GB HDD (> 120 GB). If the HARD disk is not recognized you use a 120 GB HARD drive only.

Tags: Toshiba

Similar Questions

  • Satellite P35-S609: DVD burner Mat * one disappeared UJ-820 s

    I bought a P35-S609 end 2004. The DVD burner was dead on arrival. I brought back to the seller, and they exchanged the laptop.

    The dvd burner worked for the first two years and then he started to disappear and reappear, leaving events in the journal system such as pasted below. A few months ago, he has disappeared and I have not seen since. Help!

    THX,
    JD

    In the system event log:

    Event type: error
    Event source: PlugPlayManager
    Event category: no
    Event ID: 12
    Date: 26/02/2007
    Time: 05:04:26
    User: n/a
    Computer: BACK2OZ
    Description:
    The device "MAT * a DVD-RAM UJ-820 s '."

    (IDE\CdRomMAT***A_DVD-RAM_UJ-820S___1.50___\5&1cd2b8a9&0&0.0.0) disappeared from the system without first be prepared for removal.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Hello

    Everything looks like a hardware malfunction.
    But what exactly do you mean by disappear? The drive is not listed in the my computer zone, or he can simply read and write media?

    However, after 2 years of work it s not unusual that the player will start malfunctioning I guess that the lens of the drive can read and write the CD or the DVD.
    So I agree with Marina4000 and it s time for a new

  • Satellite L755D - Connect via Bluetooth not accepted AirTrack speakers?

    I try to connect my soundbar via Bluetooth. Soundbar detects my PC.
    I use the Bluetooth Wizard, and it also detects my soundbar, AirTrack E550.

    But when installing speakers, I get a message that my device is not accepted?
    Can someone help me with this problem?

    Bluethhoth Stack for Windows by Toshiba, version v8.00.06 (T) is installed.

    My PC: Satellite L755D

    Hello

    I think that must be the PIN code while trying to connect the two devices.
    If you will be asked to go through the code, you must put 0000 (4 x zero)
    You can only connect a BT (portable) device that supports the A2DP (AV) features.

  • Satellite P35-S609 - boot possible from the SD card?

    Hello.

    I did some autour research to see if it is possible to start a P35-S609 laptop computer and the SD card. Obviously, I have not found anything useful yet...
    I'm just boot Damn Small Linux from a 1 GB SD card. I started with success from a USB key, but they are so slow on this laptop... so I'll try a SD card instead.

    I've updated my worm 1.40 BIOS to see if there was no support for this, but nothing helped.

    Anyone know if it is even possible to start an SD card on this laptop? Or am I wasting my time?

    See you soon.

    Rob.

    Hello

    I never heard that it is possible to boot from an SD card so I doubt that. The BIOS doesn't support and an update of the BIOS will not add this feature.

    Sorry, but if you want to boot from a Linux system, you must use the USB, CD/DVD disc or HARD drive.

    Welcome them

  • Re: Satellite L30 - 134 new HDD

    Any SATA2 HARD drive would work with the Satellite L30-134?

    Initially, it has a 60GB HDD inside Toshiba MK6034GSX

    Thank you

    Hello

    Theoretically, every SATA2 HARD disk should work. This interface is compatible downgrade to the old interface SATA1 and so I see no reason why it should not work.

    But SATA2 interface will not bring a performance gain. Hard drives 2.5 normal Don t have such a level of high transfer.

  • Satellite PRO A10 new HDD partition with 80 GB HARD drive

    I've recently updated the original 30 GB HARD drive for a 80 GB HARD drive. I used the recovery CD and all is well.

    The old laptop is now as good as new again.

    I notice that rather than having a c: drive of 80 GB, recovery utility has given me 3 partitions in about 25 GB each (c: d:, and e :).) They were originally FAT32 although I changed it to NTFS.

    My question is can I remove e: and d: partitions and then increase the size of the c: up to the maximum size possible (approx. 75 GB)? I know that windows xp can handle, but I don't know if the BIOS can or even why 3 partitions have been created in the first place.

    Post edited by: dim33

    To be honest I m really surprised that there are 3 partitions after the recovery procedure. I got many old books as your A10 and newer seen this.
    In any case go to disk management and try to create partitions on the way you want it to be.

    In my opinion you should have the C partition with 25 or 30 GB and the second 50 GB partition for the data record. Don t use a partition only. If something does not go the whole partition must be deleted and you will lose all of your stored data. It is always better to have the second partition for data backup.

    In the worst case (you cannot start OS), you can install Windows XP Home edition on the first partition, boot OS and have full access to all stored data.

  • Satellite L670 - 1JP external HDD not recognized at startup

    I bought an external hard drive Samsung G3. The first time I plugged it, it was directly recognized by my Toshiba Satellite L670-1JP and worked without any problems.

    But later almost whenever I start my computer, it is not the external hard drive. Then I have to disconnect reconnect en USB connection several times to make it work.

    It is your time, so how can I solve this problem?

    Hello

    Other USB devices work properly in the laptop Satellite L?

    Have you tested this disk external DRIVE with other computers/laptops?

    I think that you should do this because it might be an external HARD drive failure.

    Check it!

  • Satellite P500-12F - new HDD question

    I just realized that I have two HDD on my model, both sizes are 232 GB.

    I thought must be partitioned because when I checked
    Properties it shows just like below.

    * THE HDD2H21 TOSHIBA MK5055GSX 500 GB 2.5 "HDD INTERNAL *.

    I recently used Hard Disk Sentinel and got a very bad result of health of 44% with warnings and decided to buy a new HARD drive.

    I found one with the same reference as above but it is a single unit of 500 GB, I'll be able to install this one instead of the other two?

    Hello

    > I'll be able to install this one instead of the other two?
    The laptop was equipped with a 500 GB SATA HDD.
    You can find two partitions on this HARD drive,

  • Inspiron 2500 new HDD not recognized

    I replaced the original 10 GB hard drive in my Inspiron 2500 with a PATA/IDE Hitachi 80 GB 5400 RPM HARD drive (mod 0 has 28417).   BIOS shows no disc HARD now.  BIOS is the current version, A15.  I tried to remove and re-seating the new drive twice with no effect.

    I found other threads of message showing Inspiron 2500 owners upgrade to 80 GB hard drives with the downside of not to use a SATA disc successfully.  So I thought this drive would be compatible.  I was wrong?

    First, I share this drive for something else, any suggestions?


  • Old computer died, new will not accept my Photoshop CS (v1)

    How can I upgrade?

    You long to upgrade eligibility, CS1 is not compatible with contemporary operating systems and if that wasn't enough, this also applies:

    Error: Unavailable activation server | CS2 or Acrobat 7, older products

    Hopeless case. Sign up just for creative cloud.

    Mylenium

  • Satellite P10 - 804 - new HDD - restore procedure

    I replaced the hard drive.

    What is the procedure to restore with the product recovery CD?

    Simply place the 1st of the 2 Cd in and boot to the top?

    Thanks in advance and have a good weekend to all.

    Hello

    If you want to create two partitions, please check this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=4462&messageID=14518

  • Need new HDD for my Satellite C855 1RL

    My drive hard internal is not read and was told that I need a new. Where can I buy a new HDD for a Satellite C855 1RL, and what kind of money it costs. I have the recovery disks

    Thank you

    You can buy new HARD drive in every store of the computer. What you need is 2.5 "SATA HDD.
    In my opinion you should now reflect on the upgrade and buy SSD that will offer more performance and make your laptop run much faster than before.

    Talk with your dealer ad pick up some useful information about the HDD and SSD upgrade Exchange.

  • Satellite P500-1DX will not accept password

    Satellite P500-1DX - Windows 7.
    Not connected this morning no problem, return to work will not accept password.
    Had not implemented the password reset disk, but have one created from my old laptop which is vista OS.

    However, when I enter the P500 it runs the wizard and an error occurs.
    The laptop has perfectly to update Norton 360 on it is probably not a virus.

    All ideas

    Hello

    What password do you mean exactly?
    BIOS or Windows user password?

    If you're talking about BIOS password then I have some bad news for you; You cannot reset a unknown BIOS password. Only a Toshiba ASP technician may remove unknown BIOS password.
    But if you talk to windows user password, then you could reset/clear the password by the new installation of the operating system for this you can use a HARD drive recovery option.

    PS: I found this article on resetting a password account user in Vista or Windows 7. I did not try it, but some people on the net reported that the account password could be changed successfully
    http://www.Vistax64.com/tutorials/102005-reset-user-account-password.html

  • why Apple does not accept my new password?

    Why Apple will not accept a new password I create?

    Would appreciate advice.

    Writing an effective question of communities of Apple Support

  • iPad does not accept the new password for the new internet provider

    Installed new Internet link service - century. IPad will not accept the password written on the modem. How can I connect to wi - fi with this situation?

    Can you connect to the Wi - Fi connection with another? The problem may be with the password. Read this article: If you need help with your Wi-Fi - Support Apple password

Maybe you are looking for

  • Motorcycle display dark hours ago?

    When I got my Z days, I had the display option in the application of the bike to set the "dark hours". After installation of the last updated system & applications update, I can't find the option more. If it has been deleted? I was looking forward to

  • The upgrade to Cisco ACS SE and Remote Agent

    Hello Currently we are upgrading the PDC to Windows Server 2008, Standard Edition R2. I am little confused with information available for upgrade scenarios. Appearing on the current working versions. Cisco ACS SE - version 4.1 Build 23 5 Patch 1 Cisc

  • Microsoft called my house and told me I was hacked?

    1813-384-5401 called said his brand name. Told me my computer has been hacked, I said I have no computer online and asked Hi, who are you? He replied again Mark. He then went silent let out a few cough bit so I hung up. I have computers online but re

  • bind the parameter to dynamic sql

    Dear userI want to bind the variable at run timethe problem is as follows:-I have a table like this: -.type_id, rule_dtls, rule_id, using_paramterrule_id and type_id is an idea just to the rule and objectusing_paramter:-is parameters used to bind the

  • How to display all the symbols of the metadata update

    Using Windows 7 and LR 5 I would like to know if it is possible to view all my photos as only a metadata day symbol so I could get them all at once