Satellite P500 - AutoPlay message

Similar Questions

• Satellite P500: no message "No items to select" after BIOS 3.1 update

  Hello

  I upgraded my Satellite P500 with the update of the BIOS Version 3.10 since the support site.
  Now I get the error 'No element to select' message after the laptop has rebooted. Someone has an idea, how I can solve this problem?

  best regards and thanks in advance
  Ralf

  Hello

  Never seen this message and to be honest, I don't know what elements should be chosen.
  Go into the BIOS settings and set it back to default settings.
  Save the change and reboot the device.

  Check it!

• Satellite P500 turns off most since re install Windows7

  Hi all

  Toshiba satellite laptop
  series: P
  Model: P500
  Model number: PSPGSE
  Operating system: Windows 7 Home Premium edition

  Following a final crash of the original hard disk, so I changed the drive and performed a complete re-installation of windows7 (an original touch and put my original).
  Subsequently I have re installed the driver via the toshiba site (most importantly, so no software supplied automatically with PC purchase), and that all are present according to device (of interrogation or other point of warning) Manager.
  More through the touslesdriver.com site, I added their scanning software small told the pilot to missing day or not (so basic but all seems normal...)

  Windows of decanting finished and I started to update the drivers, windows out never normally, menu, start, stop, closing the session and after that bogus on "stoppage of work" until the "Blue Shield (about 10 minutes later, a solution or the button works / stop)."
  Single point, drivers arrive to their windows or windows installation to restart, but the problem always comes back.

  Then in normal mode, no messages or any other information that makes me say that there is a problem, but when close windows here is barattes in a vacuum no solution other than the button walk / stop (I also tried ms config: stop all, same effect).

  Now in safe mode gives the change!

  Beginning and end of windows that is no problem!

  Still in safe mode, the device section driver, then display devices, 'plug and play' shocks only information is that an exclamation mark on 'Security processor loader driver' is not visible outside the safe mode.

  No possibility of anything and much too much different information on the net which could help me solve this exclamation point and certainly my problem?

  Hello

  I own P500 too, but I use it with the new HARD drive but with the original recovery image (Win7 64 bit) I've had with her. Why have problems such as you, when I can have perfectly installed OS. That do after the installation of recovery image's own upward and the optimization of the OS. I have delete all things I don't no need and turn off all unnecessary processes that can slow down my system.
  I m really wondering why you do the same and use OS without a few installation issues.

  In any case, after reading your ad I didn t understand what your problem is, but what I can say is follow:
  Satellite P500 is fully supported for Win7 so you do not have some third-party software of the part for the detection of drivers and similar useless diagnosis. All the necessary drivers, tools and utilities, you can find and download from http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  On this virtual path, I can't tell what your problem and how to fix it. I know, it's that the whole available drivers on the Toshiba download page are tested and are part of the original image recovery.
  I think either you should reinstall the OS using original recovery image and remove all the stuff, you need or reinstall Win7 clean and begins to install the drivers, tols and utilities Toshiba download page only.

  Order of installation:
  Windows 7
  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Rapid Storage Technology driver
  TOSHIBA supervisor password utility
  TOSHIBA HW utility
  TOSHIBA Value Added Package
  O2 card reader controller
  Audio driver
  Wireless LAN driver
  Synaptics Touch Pad Driver
  TOSHIBA HDD Protection
  Bluetooth Stack for Windows by Toshiba
  LAN driver
  Sleep USB TOSHIBA and service charges
  TOSHIBA face recognition
  TOSHIBA eco Utility
  TOSHIBA HDD/SSD Alert 3
  HDMI Control Manager
  ConfigFree
  TOSHIBA Assist
  TOSHIBA Web Camera Application

  Bye and good luck

• Satellite P500-12D - civilization 4 does not start

  Problem with Civilization IV patched in version 1.74

  Tried to run the game without a patch and it could load into a black screen and stop.

  Patched in version 1.74, he did the same thing but the message
  "Error loading shader libraries.

  Windows is up to date,
  Geforce drivers are up to date about those on the Toshiba site. I can't install

  the later versions available directly from NVIDIA, which is strange, as I am with a Geforce 230 M.

  SYSTEM INFORMATION: OS WIN7 64 bit

  Date 03/01/2010 01:14:58

  [Information on PC]
  Model name SATELLITE P500 12D
  Part number PSPG8E-01D007EN
  Number of series x
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS V2.50
  Processor Intel (r) Core (TM) 2 Duo CPU P7450 2.13 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 749,744,054,272 [bytes] 698.254 [GB]
  Capacity of the hard drive space free 644,687,319,040 [bytes] 600.412 [GB]
  Video NVIDIA GeForce GT 230 M version = 8.15.11.8642
  Screen resolution 1680 x 945 Pixels
  Color quality, true color (32 bit)
  Version of NVIDIA High Definition Audio sound = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Conexant Pebble high definition SmartAudio version = 4.98.6.63
  Network version Atheros AR8131 PCI - E Gigabit Ethernet Controller = 1.0.0.17

  MAC address = 00:26:9E:90:F3:E7
  Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC

  version = 2009.1.1222.2009 = 00:26:B6:9 A MAC address: 1E:2F
  No modem
  Internet Explorer 8.0.7600.16385
  Device IDE TOSHIBA MK5055GSX
  IBG 4H6Z0XEVG SCSI CdRom Device = 1.03 FW version
  HL-DT-ST DVDRAM GT20N FW version = tm10

  [Information QFE]
  Windows security update "KB973525.
  Windows Update "KB974332.
  Windows Update "KB974431.
  Windows security update "KB974571.
  Windows Update "KB975364.
  Fix Windows 'KB975467.
  Windows Update "KB976098.
  Windows security update "KB976325.

  Hello

  May I ask if you have checked the system requirements for Civilization 4 first? Before you try to play a game, you should check the system requirments. Is the laptop fast enough and very important: the graphics card is compatible with this game?
  Check this box!

  If you meet the system requirements make sure that the latest Toshiba display driver is installed. Don t use the driver from nVidia directly, it doesn t have a protection against overheating.

  And you have installed the latest version of DirectX?

• Satellite P500-12D - a problem with the cooling system has been detected.

  Hi there everyone,

  I bought a Satellite P500-12D, which was a return of retail. When I start it up it runs a few minutes and then it appears on the screen:
  WARNING: A problem with the cooling system has been detected. Please, turn off computer immediately and return it for service.

  Follow the health of toshiba CPU is less than 50% temp and if it goes much higher that the cooling fan turns on and it lowers down and the fan stops again, I noticed that only the fan works r/h to cool the cpu, both should come together? What is a software problem?

  TThe unit is new without even the plastic off the surround screen or webcam. Any help or even point me in the right direction would be much appreciated, gary

  Hello

  Which program gives you this error message about the cooling system?

  Before contacting a service partner, as you can read in the error message, you must clean the cooling system using a jet of compressed air. Maybe dust blocking the fan or something else. Of more to clean up it of not necessary to disassemble.
  Here is an article on this topic: [how to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  If it doesn't help, contact the nearest service partner.

• Satellite P500 - freezing when inactive, the his and other questions

  Hello

  I have a Satellite P500 (bought in January) with Windows 7 and I've always had and some problems with it since I bought it:

  -First of all, my serial number is not for the toshiba Web site, which is annoying when I want to update my drivers. In addition, automatic detection does not work. And when AI attempt to manually select the model, the only available is the "P500-1GN' (I'm sure that my model is just"P500").

  -Second, sometimes, when I don't touch my computer for a few minutes/hours, it freezes and I can't do anything on this subject, I just reboot it. Sometimes, I take just the mouse, the cursor still moves but I can't click on anything and 5 seconds later, the cursor hangs also. Another time, I was chatting on Skype (voice chat) without touch to the computer and when I will come back, the seams of frozen screen, I couldn't do anything with the keyboard or the mouse, but I could still chat with Skype.

  -Thirdly, I also have some problems of sound. When I listen to music and do nothing on the computer, no problem. But if I do something (like go on inernet, copiing files, etc...), I have some very annoying noise interference. I try with the speakers and headphones, it's the same thing.

  -Fourth, less annying, then the others. When I type a text on the keyboard, somethings, the cursor from writing just go somewhere random in the text (it happens twice while I was typing this message...).

  I tried to do a factory restore. Also, I have a version update of Avast, Spybot and Comodo Firewall, but I can not find the cause of these problems. I am wandering if I should ask for a replacement or something...

  So... can anyone help me? Thanks in advance.
  Oh and sorry for my bad English.

  Hello

  > First of all, my serial number does not exist for the toshiba Web site, which is annoying when I want to update my drivers. In addition, automatic detection does not work. And when AI attempt to manually select the model, the only available is the "P500-1GN' (I'm sure that my model is just"P500").

  LOL: D didn't you notice that the Toshiba driver page contains the series of laptop and has no lists the unique laptop models?
  Satellite P500-1GN is a part of the series PSPGSE call with P500 PSPGSE

  > Second, sometimes, when I don't touch my computer for a few minutes/hours, it freezes and I can't do anything on this subject, I just reboot it. Sometimes, I take just the mouse, the cursor is always moving, but I can't click on anything and 5 seconds later, the cursor freezes also. Another time, I was chatting on Skype (voice chat) without touch to the computer and when I will come back, the seams of frozen screen, I couldn't do anything with the keyboard or the mouse, but I could still chat with Skype.

  This may be related to different issues; problem in the system, memory problem, etc. graphics driver problem
  However, check the advice posted by Akuma; try disabling the USB selective suspension tuning"in the Advanced Power Options

  > Thirdly, I also have some problems of sound. When I listen to music and do nothing on the computer, no problem. But if I do something (like go on inernet, copiing files, etc...), I have some very annoying noise interference. I try with the speakers and headphones, it's the same thing.

  Update the audio driver is worth a try

  > Fourth, less annying, then the others. When I type a text on the keyboard, somethings, the cursor from writing just go somewhere random in the text (it happens twice while I was typing this message...).

  I had the same problem with the cursor, but it wasn't a really a problem. This is the reason why the cursor jumped around I touchpad the touchpad accidentally while typing.

• Order of error has been committed by satellite P500 - service TOSHIBA Power Saver

  Model:-PSPE8A-025002
  [http://www.mytoshiba.co.nz/products/home/notebooks/satellite/p500/pspe8a-025002]

  OS:-Windows7 Ultimate (32 bit)

  On start up to get a service stopped notification - "service TOSHIBA Power Saver was arrested, so cannot be changed".
  That is the only other cause the change of Windows 7 known behavior where the Eco Power Saver button is no longer works but the Control Panel/Power Options standard I can select and edit power plans as usual. So it is just an annoying pop up on start up.

  Tips to prevent the annoying notification welcome.

  BR /.
  Rob

  Hi Rob,

  Have you tried to reinstall Toshiba Value added Package? It contains current saver where you get this error message. You can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I also recommend reinstall the Eco utility.

  Good luck! :)

• Can satellite P500-12D - I use the nVidia drivers?

  The latest NVIDIA drivers on update from Toshiba website are 8.15.11.8642, but there are newer versions on the NVIDIA site. I would like ot update the NVIDIA drivers but I have any difficalties.

  I tried to install version 195.62 (Win7 64 bit) for the Geforce 200 M series fron the NVIDIA SITE but installation is not complete. I get the message: "Setup NVIDIA didn't find all the drivers that are compatible with your current hardware. The installation program will now stop. »

  Toshiba only allows their own versions of the drivers? Is there a way to enable the NVIDIA drivers to istall?

  SYSTEM INFORMATION: operating system WINDOWS 7 64 bit
  Date 03/01/2010 01:14:58
  [Information on PC]
  Model name SATELLITE P500 12D
  Part number PSPG8E-01D007EN
  Number of series x
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS V2.50
  Processor Intel (r) Core (TM) 2 Duo CPU P7450 2.13 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 749,744,054,272 [bytes] 698.254 [GB]
  Capacity of the hard drive space free 644,687,319,040 [bytes] 600.412 [GB]
  Video * NVIDIA GeForce GT 230 M * version = 8.15.11.8642
  Screen resolution 1680 x 945 Pixels
  Color quality, true color (32 bit)
  Version of NVIDIA High Definition Audio sound = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Conexant Pebble high definition SmartAudio version = 4.98.6.63
  Network version Atheros AR8131 PCI - E Gigabit Ethernet Controller = 1.0.0.17

  MAC address = 00:26:9E:90:F3:E7
  Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC

  version = 2009.1.1222.2009 = 00:26:B6:9 A MAC address: 1E:2F
  No modem
  Internet Explorer 8.0.7600.16385
  Device IDE TOSHIBA MK5055GSX
  IBG 4H6Z0XEVG SCSI CdRom Device = 1.03 FW version
  HL-DT-ST DVDRAM GT20N FW version = tm10

  [Information QFE]
  Windows security update "KB973525.
  Windows Update "KB974332.
  Windows Update "KB974431.
  Windows security update "KB974571.
  Windows Update "KB975364.
  Fix Windows 'KB975467.
  Windows Update "KB976098.
  Windows security update "KB976325.

  Hello

  Counter question: why you want to use any other display drivers? Are not satisfied with the drivers of Toshiba or can you notice problems in Windows?

  Theoretically, it is possible to use the nVidia drivers directly but don t forget that they are not pre-tested on your laptop. Your graphics card could be overheating and so you lose the warranty.

  Satellite P500 is fairly new, so I guess that Toshiba updates the display driver in next time too. Take a look at the page from time to time. ;)

• Satellite P500 - fingerprint for IE does not work

  Hello

  I have a Satellite P500 fingerprint utility works for the signature but not for IE (Internet Explorer)
  I entered my username and password finger scan and the masage arrives and saves.

  But when I go back to the web site and analyzes the hands that I you data must be entered.
  I went to the utility and IE is checked and there is no saved web pages.
  When I try to change the seting I get an error message "an error has occurred in recording"

  Can anyone help.

  Thank you

  Hello

  I noticed that sometimes the fingerprint software could work with IE as it should because of the changes and updates of the internet explore.

  Try this:
  1 unregister all fingers
  2 uninstall the software of fingerprint
  3. clean the operating system used a cleaner
  4. to update the operating system and install all MS patches
  5 reinstall the software of fingerprint

  If that does not help, then you will have to wait for a new version of the fingerprint software.

• Satellite P500 file system error

  I have a Satellite P500
  I am gettinga message on start up"checking file system on C: the type of file system is NTFS. Volume label is S3A8372DOO4. "and it goes no further everything it just stops.

  Also says a disk check has been programmed to jump press a key, but it stops at 1 second and no key that I touched it starts...

  Can it be fixed without a full format?

  Hello

  Press F8 and go to Advanced Boot Options.
  Then choose Mode safe mode with command prompt
  Here, you should try to use the command: * f * chkdsk
  This command allows you to check the HARD disk and repair sectors.

• Impossible to connect external devices using BT to my Satellite P500

  I have a Toshiba Satellite P500 - 12N Win7 64 bit PC and recently I have a problem with Bluetooth.

  When I try to connect my LG KM900 cell phone or my HP printer, the following message appears: "unable to detect the service" and the connection is not.
  Both devices are still detected by the PC Bluetooth. Bluetooth worked successfully on both machines before this incident. Bluetooth on my PC version is: V7.00.08 (T).

  To my knowledge, there is no change or update the Bluetooth on my PC software.
  Any help would be welcome and thank you in advance

  What you can do is to install the last stack of Portal Toshiba BT BT - http://aps2.toshiba-tro.de/bluetooth/?page=download and also do not forget the device BT is successfully activated WLAN switch in position ONE and use the FN + F8 key combination to activate the BT module.

  I have the same laptop and connected with my LG BL 40 New Chocolate.
  For me the most important is Satellite P500 mobile phone photo transfer and it worked perfectly.

• Satellite P500 keeps closing

  Hello

  My new Satellite P500 maintains close without apparent reason. Does not seem to matter what I am doing, play games on the net or just clean up the files, twice it almost closed but recovered itself and displays a message about the video card. Is someone else has a similar problem?
  any ideas how to fix it would be most appreciated.

  Thank you.

  Post edited by: Kaz65

  Hello

  8 months, I have Satellite P500. He is always pre-installed with OS, I received from Toshiba (Win 7 64 bit) and the laptop runs very God. Preinstalled OS runs stabile and so far I didn't notice any serious problems. Several times I had the same problem with display driver recovery, but I don't see it as a critical issue

  What operating system do you use? It's the original OS, you got with your laptop?

• No sound on my Satellite P500

  I have a portable Satellite P500 series - Windows Vista 32-bit - currently there is no audio data.
  A message "no audio output device is installed" appears when I hover over its icon in the toolbar.

  Can someone adcvise what driver should I install. ?

  Toshiba has produced two different models of P500 with PSPG8E and PSPGSE part number. On download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp choose your model and you will find the driver of his right.

  If you still need help to let me know that references your laptop and I'll find it for you.

• Satellite P500 PSPG8E - buddies Bios 3 times - a long two short

  Hello

  I have a question: when I turn on my Satellite P500 PSPG8E I get 3 friends: a long two short!

  What is, perhaps memory?

  Thank you d ' attribute
  Greetings from the Germany

  Michael Burkhardt

  Hello

  This laptop supports Phoenix BIOS.
  You use a google for Phoenix beep codes for details on the meaning of the code.

  But in General; the code means that an error has been detected on the motherboard. The POST (power on self-test) cannot be passed.
  Theoretically, it may be a RAM issue, but it's just a suggestion.

• Installation of Windows 7 64 bit on a Satellite P500

  I bought the above system in August last year with 32-bit Windows 7 installed. I understand that it is not possible to upgrade and to a complete new installation. Is it necessary to format the hard drive first? Have backed up all my data (there was not a lot), but wonder if there is something else I need to know before you continue. Any help would be much appreciated.

  Hello

  I m a bit confused because I have too many Satellite P500 and, as far as I know, this laptop model comes with 64-bit only.
  Can you please tell us what P500 you exactly (P500-xxx)?

  You are right; before installation Win7 HDD needs to be formatted. If you have installed the OS in the past, I guess you know how it works.
  Associated with Toshiba here are two things you should know before starting with the installation of Win7 64 bit:
  # Create recovery with the original Toshiba image DVDs. This disk, you can use if you want to have the factory settings once again.
  # Drivers, tools and utilities must be installed in the proper installation order. If you ned some hep with it let us know.