Satellite P500 shows PVAT Setup Error 0x80C70220

Similar Questions

• Satellite C660 - installation VAP displays error 0x80C70220

  Toshiba Satellite C660 - 162 (PSCSE), Windows 7 Professional 32 bit, Value Added Package 1.3.19

  Well, I just my laptop format and not the function piece works for me. I tried to install PVAT but I get this "error 0x80C70220".

  Advice please!

  Hey Buddy,

  You have installed all the drivers for your laptop? Driver missing like chipset or else can cause this error.

  Also install the package of value added as an administrator. With a user without administrator rights account will not help you. Last but not least unzip all files before starting the installation.

  Check this box!

• Satellite Pro L20: Configfree Setup error - system only is not supported

  I tried to update the Configfree with a version more recent on the Toshiba support (for PRO L20 series) site.

  Setup uninstall me the old version and after that it me to say that "the system is not supported.

  How to recover or reinstall my Configfree without using the recovery CD.

  Thank you

  I m wondering if you used the right and compatible ConfigFree Utility.
  It seems you didn t, and so this error message occurred.

  > How to recover or reinstall my Configfree without using the recovery CD.
  I don t think you will be able to reinstall it from the recovery CD without having to install the entire operating system because you will find on the only recovery CD image file. That's why it of not possible to extract individual files, the image of Toshiba programs.

  If you n t want to reinstall the whole OS using the recovery CD, then you can try putting the BONE to this early time by using the System Restore tool.

  Check it out!

  Ciao

• Disk checking on Satellite P500 error

  Having owned my Satellite P500 for a few months, I thought I should check the drive for errors etc - no particular reason, "just in case" something

  I clicked on the button under computer/drive/properties/Tools/Error Checking / Check now... and, as expected, she offered schedule a scan next time that the computer has started. This he duly did, but after offering an opt-out from the disk check, the screen has become almost empty without indication of progress or anything else.

  The only indication that something could happen is the drive on the keyboard of flickering light.

  That's the way it should be, or if there is a meter on screen or progress or at least something to show this disc error checking is actually underway?

  Does anyone have experiences of disk checking under Windows 7 64-bit?

  Thank you
  David

  Post edited by: HomeGuard

  There is not a progress bar or something like that. you will see the black screen with something written on the subject similar to the DOS window.

  All that s.
  Everything is OK.

• Order of error has been committed by satellite P500 - service TOSHIBA Power Saver

  Model:-PSPE8A-025002
  [http://www.mytoshiba.co.nz/products/home/notebooks/satellite/p500/pspe8a-025002]

  OS:-Windows7 Ultimate (32 bit)

  On start up to get a service stopped notification - "service TOSHIBA Power Saver was arrested, so cannot be changed".
  That is the only other cause the change of Windows 7 known behavior where the Eco Power Saver button is no longer works but the Control Panel/Power Options standard I can select and edit power plans as usual. So it is just an annoying pop up on start up.

  Tips to prevent the annoying notification welcome.

  BR /.
  Rob

  Hi Rob,

  Have you tried to reinstall Toshiba Value added Package? It contains current saver where you get this error message. You can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I also recommend reinstall the Eco utility.

  Good luck! :)

• ConfigFree on Satellite A100-413 Setup error

  Helle everyone,

  I just removed the notebook Windows XP MCE of mij forum, Francois, it's that I don't want any stuff-tools than thosiba on my laptop.

  So I installed windows XP Pro LEGAL. All the drivers are working perfect but miss me one tool of Toshiba.
  It is his network manager, whireless, bleutooth etc. which apears right at the bottom of the screen (this isn't a system tray icon)

  Now if I whas fix included in configfree (or confree)
  So thinking, I downloaded the zip and run the insite facility there.

  The result is an error "the installation image is not correct.

  All knows how to get this Setup working of our get this program I whas talk on my computer?
  Excuse me for my bad English

  You talk about the Toshiba Configfree application.
  I don't know why the Setup error appears, but I wouldn't reinstall this tool m.
  You can find it on the page of the Toshiba driver A100 section.
  But there are 3 different satellite A100, so be sure that you have chosen the right way.
  After removing the BONE in addition Configfree & remove programs, you must restart the unit, and then you try to install it again.

• Satellite P500 file system error

  I have a Satellite P500
  I am gettinga message on start up"checking file system on C: the type of file system is NTFS. Volume label is S3A8372DOO4. "and it goes no further everything it just stops.

  Also says a disk check has been programmed to jump press a key, but it stops at 1 second and no key that I touched it starts...

  Can it be fixed without a full format?

  Hello

  Press F8 and go to Advanced Boot Options.
  Then choose Mode safe mode with command prompt
  Here, you should try to use the command: * f * chkdsk
  This command allows you to check the HARD disk and repair sectors.

• Satellite P500-190 stuck in a loop

  Well, I try to summarize what has happened so far.

  I have a Toshiba Satellite P500-190 has started acting as each task is too big for him, constantly showing disk hard loading, programs did not respond for a while... then I ran the reconverty tool, reset the c drive, the problem still there.

  I ran all the error detection of characteristics of pc, no hardware problems or software detected. So I installed malwarebytes anti-malware and ran a scan, it finds errors, but before I could act, the program froze again no response. Press ctrl alt del, black screen, no response... reboot. Now my dosent pc even trying to start windows, only error detection program and each restart goes like this, even after going through the program as it is said.
  I tried to get to the other menus of repair, but it says I must be logged in to do this.

  Any ideas how to continue?

  Hi bug

  Please reinstall the recovery image and boot OS without having to install additional stuff.
  Do not connect to the internet and check the functionality. Open some pre-installed apps and see if they will not work correctly.

  Play around with these factory settings and let us know if there is a problem.

  How old is your Satellite P500?

• Satellite P500 PSPG8E - buddies Bios 3 times - a long two short

  Hello

  I have a question: when I turn on my Satellite P500 PSPG8E I get 3 friends: a long two short!

  What is, perhaps memory?

  Thank you d ' attribute
  Greetings from the Germany

  Michael Burkhardt

  Hello

  This laptop supports Phoenix BIOS.
  You use a google for Phoenix beep codes for details on the meaning of the code.

  But in General; the code means that an error has been detected on the motherboard. The POST (power on self-test) cannot be passed.
  Theoretically, it may be a RAM issue, but it's just a suggestion.

• Satellite P500 - 1 CG - PCI Simple Communications controller driver for Win 7

  I reinstalled the system in my Satellite P500 - 1 cg, because it was in English and I use the Polish language.
  After the reinstallation, I have a problem and I need a "PCI Simple Communications controller / pilot.»

  Can someone help me on this?
  Thanks in advance for any help...

  Hello

  To be honest PCI Simple Communications Controller does not for me
  I think that there is a translation error.

  Please check this doc from Toshiba:

  How to identify an unknown device
  http://APS2.toshiba-tro.de/KB0/HTD0302U00000R01.htm

  It helps you to identify the device and find the right driver.

  Welcome them

• Satellite P500 - loop of reboot after using the Toshiba Recovery disk

  Hello

  I have a problem recovery SATELLITE P500. I did the recovery disks. It starts ok on the recovery disk and format the hard drive and copy the disks to the hard drive. Then, he begins installing windows and restarts.

  He then goes to a loop
  (1) marketing and says "Setup is preparing your computer for first use.
  (2) Toshiba banner saying please wait... Second installation may take several minutes. Pleae do not interrupt or shut down the computer!
  (3) Windows logo
  (4) close...
  (5) restarts and goes to 1)

  It would be great if someone could help me with this.

  Thank you very much
  Softari

  Hello

  I noticed the same thing on my Satellite P500, but I must say it s not a problem, it of quite normal. The computer will restart several times (10 times or more) to complete the installation.

  You know that a lot of drivers/tools will be installed and some restart is required to configure everything properly.

  So don t interrupt the installation of recovery, just wait a little longer and a coffee. Everything is done automatically and your laptop is reinstalled with the factory settings. :)

• Satellite P500-12D - civilization 4 does not start

  Problem with Civilization IV patched in version 1.74

  Tried to run the game without a patch and it could load into a black screen and stop.

  Patched in version 1.74, he did the same thing but the message
  "Error loading shader libraries.

  Windows is up to date,
  Geforce drivers are up to date about those on the Toshiba site. I can't install

  the later versions available directly from NVIDIA, which is strange, as I am with a Geforce 230 M.

  SYSTEM INFORMATION: OS WIN7 64 bit

  Date 03/01/2010 01:14:58

  [Information on PC]
  Model name SATELLITE P500 12D
  Part number PSPG8E-01D007EN
  Number of series x
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS V2.50
  Processor Intel (r) Core (TM) 2 Duo CPU P7450 2.13 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 749,744,054,272 [bytes] 698.254 [GB]
  Capacity of the hard drive space free 644,687,319,040 [bytes] 600.412 [GB]
  Video NVIDIA GeForce GT 230 M version = 8.15.11.8642
  Screen resolution 1680 x 945 Pixels
  Color quality, true color (32 bit)
  Version of NVIDIA High Definition Audio sound = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Version of NVIDIA High Definition Audio = 1.0.0.59
  Conexant Pebble high definition SmartAudio version = 4.98.6.63
  Network version Atheros AR8131 PCI - E Gigabit Ethernet Controller = 1.0.0.17

  MAC address = 00:26:9E:90:F3:E7
  Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC

  version = 2009.1.1222.2009 = 00:26:B6:9 A MAC address: 1E:2F
  No modem
  Internet Explorer 8.0.7600.16385
  Device IDE TOSHIBA MK5055GSX
  IBG 4H6Z0XEVG SCSI CdRom Device = 1.03 FW version
  HL-DT-ST DVDRAM GT20N FW version = tm10

  [Information QFE]
  Windows security update "KB973525.
  Windows Update "KB974332.
  Windows Update "KB974431.
  Windows security update "KB974571.
  Windows Update "KB975364.
  Fix Windows 'KB975467.
  Windows Update "KB976098.
  Windows security update "KB976325.

  Hello

  May I ask if you have checked the system requirements for Civilization 4 first? Before you try to play a game, you should check the system requirments. Is the laptop fast enough and very important: the graphics card is compatible with this game?
  Check this box!

  If you meet the system requirements make sure that the latest Toshiba display driver is installed. Don t use the driver from nVidia directly, it doesn t have a protection against overheating.

  And you have installed the latest version of DirectX?

• Satellite P500-16 t - how to disable the sound of multimedia keys?

  I recently offered a Satellite P500-16 t. First of all, I find nowhere any reference of this laptop. So if you have a similar and know how to stop the bipping when I put the sound, I'd be very happy. And, if by chance, you know why this laptop is not in the list of toshiba support, I would like to know as well.

  Thanks to you all.

  Hi topchrunch,

  Yes, you can disable the beeper Satellite P500 in the BIOS. Therefore, to access the system configuration and disable the beep. Setup Save & Exit and he works or let's say beep is disabled. :)

  Satellite P500-16 t belongs to the PSPGSE series, and as a result, you can download all the drivers and tools here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  Laptop > Satellite > Satellite P Series > Satellite P500 > PSPGSE

  Check this box!

• Satellite P500-12D - a problem with the cooling system has been detected.

  Hi there everyone,

  I bought a Satellite P500-12D, which was a return of retail. When I start it up it runs a few minutes and then it appears on the screen:
  WARNING: A problem with the cooling system has been detected. Please, turn off computer immediately and return it for service.

  Follow the health of toshiba CPU is less than 50% temp and if it goes much higher that the cooling fan turns on and it lowers down and the fan stops again, I noticed that only the fan works r/h to cool the cpu, both should come together? What is a software problem?

  TThe unit is new without even the plastic off the surround screen or webcam. Any help or even point me in the right direction would be much appreciated, gary

  Hello

  Which program gives you this error message about the cooling system?

  Before contacting a service partner, as you can read in the error message, you must clean the cooling system using a jet of compressed air. Maybe dust blocking the fan or something else. Of more to clean up it of not necessary to disassemble.
  Here is an article on this topic: [how to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  If it doesn't help, contact the nearest service partner.

• Satellite P500-1DZ starts only with remote control

  Hi, I just bought a new laptop Satellite P500 after owning a P200-13Z and P300-160 years without ever having had a problem with one of them.

  I have a problem with the P500-1DZ that I bought because it does not start the power button when he was arrested for a period of time, as for example the night.

  If I stopped and immediately press the power button its fine and it starts as well with the remote control.

  In the BIOS, I noticed that there is an option for remote start to the top of the control that is enabled, but Im a little worried about this deactivation in case I can't restart the laptop... everyone has ideas?

  Also for other users of the P500 who are dissatisfied witht the audio output of the laptop, I fixed that uninstall the Audio drivers Connexant HD, then by restarting which allows Windows to install its own audio drivers... which has greatly improved the audio output of the laptop... even if its not as good as the old P300.

  Thank you

  Hi spidercpfc,

  This question really strange s with this start of the issue and I think that it of difficult to say why it happens exactly, but as written Akuma you should try upgrading the BIOS. You can download it from the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  Last week I updated the BIOS of my P500 also and it worked, I t has not had any problems. I updated the BIOS to the version preinstalled Windows as an administrator. Also, I closed all programs running (AntiVirus, Firewall, browser, etc.) and disconnected from the network. After a few seconds the update was done.

  After the update, you should also load default settings in the BIOS. So press F9 in BIOS setup and save these settings.

  I hope this works. :)