Satellite P750 114 - how to start using the remote control

Similar Questions

• Satellite A100 (PSAARA) - I can not use the remote control

  I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

  Thank you!

  If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
  If this does not help please let us know.

• using the remote control of the DVD does not select the correct buttons?

  Hey Ya'll,

  Project is almost complete, but I ran into one, which I think is a very simple problem...

  On my main menu, I have a total of 5 buttons on 2 rows.

  Line 1 to 2 buttons and Row 2 has 3 buttons.

  The links are correct, because they work fine in preview mode, using the mouse, but also view the version on the pc using Cyberlink DVD Viewer, once again, using the mouse to select the button.

  The problem is when you use the remote control, either on the copy engraved in the DVD player, or in preview mode, if I use the directional buttons of remote controls, that he does not want to go to the buttons I suppose it must

  (Top row left to right, then down row from left to right)

  On each of the properties of the buttons Panel, I chose the right (I guess) option number (just below name) for each button... IE top left set the right value top of page 1, 2, bottom left 3, the middle value 4 downstairs and down to the right the value 5.

  Type is set to Normal, the button name and Synch text is checked (although the No button is real, each is just a Word text, in photoshop, when I did originally the menu..)

  Also the low middle button never gets selected with the remote control of the DVD... Preview, using the buttons on the remote control, he finally gets selected, but it takes a bit of comes and goes, and the highlighted button is rarely what you would expect, since direction button your pushing.

  #1 button (top left) is set to the default button, which I want, but do not know how I set that, unless it's because it was the first button, I myself made/converted to the button)

  Here, any help would be greatly appreciated... that should finish this project!

  CB

  Cowboy Bob,

  No, what you did with the binder is actually linking these buttons to the assets.

  It shows a Menu with several buttons, icon manually road buttons depressed. Once you choose manually the buttons of road, they can change exactly what will make the remote control.

  

  As said, when you create a Menu, buttons start at # 1 and progress upward. Each Layer Set button plus up in the Layers Palette. This is the routing of the buttons Auto gets its information and it usually works. However, if you move the buttons around, removes some, etc., the en can get confused, manually their routing is the best way to go.

  Good luck and we hope this helps,

  Hunt

• Error step 7, creation of WebCenter, and schemas content using the remote control

  Hi all

  I have the installation of the portal WebCenter using JSK, but the failure of the process when it tries to create patterns using the remote, it shows "Time out when connecting to the database. The current values expires 30 seconds. "UCR-6090: jump main operation: validation stage of connection failure.

  This is the content of install_setup.log

  Thu Aug 14 10:12:32 CLT 2014: END STEP 6 22: Configurion of the database Instance

  Thu Aug 14 10:12:32 CLT 2014: START STEP 7 22: creation of the WebCenter and patterns content using the remote control. Estimated time is 1 minute. Please wait..

  localhost.localdomain:1521:ORCL

  Installation of patterns Begin spaces

  Please enter the password(User:sys) of the database:

  Processing of command line...

  Timeout connecting to the database. Current timeout value is 30 seconds.

  UCR-6090: jump main operation: validation step connection failure

  And the rcu.log

  14-08-2014 10:14:38.925 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.RCUCommandLineParser::process: processing command line...

  14-08-2014 10:14:38.927 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.SilentRCUModel::performOperation: from validations...

  14-08-2014 10:14:38.934 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: sysdba, connectString: (description = (address = (host = localhost.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (service_name = ORCL) (server = dedicated)))

  14-08-2014 10:15:39.250 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: unable to connect to database: timeout when connecting to the database. Current timeout value is 30 seconds.

  14-08-2014 10:15:39.250 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: sysdba, connectString: (description = (address = (host = localhost.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (sid = ORCL) (server = dedicated)))

  14-08-2014 10:16:39.192 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: timeout when connecting to the database. Current timeout value is 30 seconds.

  14-08-2014 10:16:39.192 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: SQLFatalErrorException:

  oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: timeout when connecting to the database. Current timeout value is 30 seconds.

  at oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine.connect(JDBCEngine.java:585)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:358)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:253)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.isConnectionStepValidated(StepValidator.java:1366)

  at oracle.sysman.assistants.rcu.backend.SilentRCUModel.performOperation(SilentRCUModel.java:140)

  at oracle.sysman.assistants.rcu.backend.RCUModel.startOperation(RCUModel.java:346)

  at oracle.sysman.assistants.rcu.Rcu.execute(Rcu.java:339)

  at oracle.sysman.assistants.rcu.Rcu.main(Rcu.java:363)

  2014-08-14 10:16:39.193 rcu ERROR: oracle.sysman.assistants.rcu.backend.SilentRCUModel::performOperation: UCR-6090: operation hand jump: validation step connection failure

  2014-08-14 10:16:39.193 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: UCR-6090: operation hand jump: validation step connection failure

  Any suggestions?

  Best regards!

  Hello

  (1) you see no error on the Setup screen? If Yes please download the screenshot?

  (2) the UCR is a failure because it is not able to connect to the database. Please make sure that you have entered the correct database details.

  Also, can you please try the following and check the box.

  Go to the location / / rcu/config /

  Take backup for the file rcu.properties, and then change the below

  JDBC_LOGIN_TIMEOUT = 30

  TO

  JDBC_LOGIN_TIMEOUT = 300

  and try again.

  Concerning

  Françoise

• Using the remote control in parallel and touch screen.

  Hello.

  Cisco TelePresence SX20 with firmware TC7.1.4.908e4a9 and has been synchronized with the touch screen. Can I use remote control when the touch screen is activated. Now the remote control is locked.

  Thank you to.

  Hello

  N ° when a codec is associated with a touch controller, it is not possible to use the remote control.

  You question No. 677 in link below

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/endpoint/articles_doc/telepresence_endpoints_knowledge_base_articles.PDF

  BR Oleksandr

• SX20: Definition of system using the remote control password

  Hello

  Cisco SX20 Quick Set: TC6.1

  I usually know the system password is set using CLI Web.

  But I would like to know if it is possible to set the system password using the remote control.

  If so, can you guide me.

  Thanks in advance

  Hello

  the remote control you can set the menu password, system password is not remotely possible.

  You can also set using cli commnad.

  xcommand SystemUnit AdminPassword Set Password: xxxxxx

  HTH

  Kind regards

  Dharmmesh

• Satellite P100-PSPA3A-05S00P - how to use the remote control & infrared

  Satellite P100-PSPA3A-05S00P.

  Do not know if I have deleted the drivers or need drivers for remote control and infrared.
  I'm not sure how to activate the infrared but I got this cable look like an infrared receiver, but you don't know where it's going.

  I used the remote when I bought the laptop from 1st but it was a few years ago...

  Hello

  I think that infrared doesn t need to be activated. It s must already be enabled.
  But the remote control can be used within Windows Media Center.
  I think this will work because my friend of mouse remote control with Windows Media Center as well and it worked well.

• How to start using the Windows XP cd?

  Can someone tell me how to start using my Windows XP cd (I don't know what it is). I have XP Professional on Lenovo ThinkCenter. Also how to enter to the Recovery Console (not sure how to do this). Thank you

  OK it's on my other desktop Lenovo ThinkPad ThinkCenter A61 model type 9120CT 0, with XP Professional. This calculation allows to logoff users once they have logged in. So I went in Rescue Recovery 4 and has a completely restored system since the last backup. There was a widow of MISTLETOE and a button to select. It wasn't a problem because we did not all pictures stored in this computer. (Thank God!).

  Now at least user can connect, go to Windows Explorer, Internet Explorer etc...! I'm still trying to understand if there are other problems outstanding. So far have not found any :)

  Thank you for giving me encouragement barely pull these questions, especially since I have never fixed before computer problems. Just by chance, sometimes I have 2 laptops and 3 desktops desktop PCs. And I could just not afford constantly hire someone to solve.

  Just one last question, what is the combination of anti-virus software do you recommend me to use?  Thanks again.

• Installation of OBIEE without using the remote control.

  Hello
  

  
  

  I installs le OBIEE et will use the Oracle database, but will not use the RCU. I wonder if I need of some pre -requisite to create the schema?

  
  Is there any documentation with installation create RCU schemas without?

  
  

  Thank you.
  

  Hello

  Without the remote control will not work OBIEE 11g because the remote control allows you to install certain patterns in a database that are required by median Fusion as Oracle BI EE ware products. These schemas can be installed on any certified version of database such as Oracle, Microsoft SQL Server, or IBM DB2 database. There are patterns that are required by the main components of Oracle Fusion Middleware, although there are Oracle BI EE patterns requires, as the Planner, BI Publisher, for the new product of the scorecard.

  Note: You can install it without the remote, but we must approach below.

  SATYA RANKI OBIEE REDDY SOLUTIONS: How to install OBIEE 11 g without the remote

  Thank you

  Satya Reddy Ranki

• How do you get the remote control 70 Revo to work under Windows 8?

  Seems as if the remote for 70 Revo does not work once you upgrade to Windows 8. Any suggestions for what drivers etc use to operate? Or could it be thath I missed something obvious...

  Had the same problem on the same hardware, found these posts was very angry and solved the problem.

  I am running Windows 8 Pro 64-bit - clean install (and not an upgrade) and same remote

  Here's how:

  1. Download "FIR_ITE_5.1.0.8_W7x86W7x64_A" from the Acer site

  (Select Windows 7 64-bit)

  http://global-download.Acer.com/GDFiles/driver/FIR/FIR_ITE_5.1.0.8_W7x86W7x64_A.zip?acerid=634614370...

  2 extract the downloaded ZIP file to your. Do not run the Setup program.

  Navigate to the folder... FIR_ITE_5.1.0.8_W7x86W7x64_A\FIR_ITE_5.1.0.8_W7x86 x64\INFDrv

  3. double-click on the reg file called "InstallRegistry.reg" to import the configuration. Be sure to meet all guests Yes OK

  4. restart your PC

  5. If should start working just after you log on, but you need to run the "CIRAP.exe" file that is located in the same folder that REG file it.

  Steps above should work if you the devices work correctly:

  Check open your device manager:

  The Panel\All Control Panel Items\Device Control Manager

  and make sure you have no exclamation point on some unknown devices

  You should also see two devices in the list under "Human Interface Devices"

  (SIO2) ITECIR infrared receiver

  and

  Microsoft eHome Infrared Transceiver

  It worked for me earlier so it should work for you too.

• How can I ask the remote control in vista

  I use Vista and need help someone remote on 7 with their computer. How to set the respective controls?

  Hello
   
  Check out the link and follow the steps.
   
  Connect to another computer using Remote Desktop connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection
   
   
  You can read the FAQ about it, check out the links:
   
  Remote Desktop connection: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions
  Remote Desktop connection: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

• How can I activate the remote control of remote desktop?

  I'm trying to control my 10.4.11 Mac OS X 10.10.4 machine.  Remote Desktop is enabled, I have vnc into it and see the screen, but the options to activate the control grayed out on my window of the 10.4.11 machine.    I know that I could do it with iChat, but I would like to be able to do this with the Office remotely like I can with 10.6 and later.  Clues as to why the mouse control is grayed and what to do about it?

  In sharing office window remote access, which users are listed, & are checked?

  If no user you must add at least one, if the box IT didn't is not enabled for a user, then all options right will be grayed out.

• Satellite P20 S203: How can I use the wireless network card?

  Hello
  first - sorry for my English. I have toshiba P20 S203 (I know - old hardware).
  I read a few descriptions on this computer and I know that the model probably have wifi. I see on the left side of my laptop, but don't see it Win Xp Pro Sp2.
  How to turn on and connect to my lan wirreless?

  again sorry for my English...

  Hello

  As mentioned the laptop has no installed wireless network card, but you can improve with one compatible.
  The minPCI card has two cables; Brown and white.
  Usually the white cable be connected to the hand and Brown to the

• SOLUTION - How to use the remote on the Satellite X 200 with Win7 64 bit

  Here is the description how to use the remote control on the Satellite X 200-2 b with Windows 7 64 bit.

  Thanks for the link.

  It will be fine if some owner of Satellite X 200 can confirm.

• How can I use the same graph of façade in several events in a structure of the event?

  I want to display my sensorDAQ signals in a graph.but I have more than one event in the case where the structure to acquire the signal and display it in the first round of graph.the is to acquire signals from threshold and its shown in the graphic as a feedback.after the first event is executed, I'll call the second event, where the other signals are acuired and compared with signals from threshold of event 1 my question is how can I use the same control on front panel in more than two events in the structure of the event? Please answer me I am stuck.

  Hello

  I have attached here an example of doing the same thing using local variables and shift registers. Take a peek inside. Shift register is always a better option than local variables.

  Kind regards

  Amine31

  (Bravo to give good answers, mark it as a solution if your problem is resolved)