Satellite P750 new HARD drive installed - what do we do now?
Satellite P750 new hard drive installed as directed assistance of toshiba video suite of crush hard drive.
What should we do now please help?
Now you must install the Windows System.
You have a Toshiba Recovery disk?
Have you created one in the past?
If you have this disc, insert the disc recovery and boot disk (press F12 and choose ODD as boot device)
Then follow the instructions on the screen
Tags: Toshiba
Similar Questions
-
Satellite P750 new hard drive: update limits
The hard drive on my P750 is dying. It's a Toshiba 2.5 ", 750 GB, 5400 RPM drive.
Is there mother (or other) card compatibility problems asking exactly the same car, or can I replace it with a larger (1 TB or 1.5 TB) drive?
Am I limited to hard drives Toshiba or can I replace it with another brand.
The laptop is out of warranty.
Hi da1
The SATA controller is not limited to a specific size, I think you could use a 1 TB 2.5 HDD. Should be recognized without big problems.
Let me know after replacing HARD drive.
-
I'm having trouble installing Photoshop GS6 after installing the new hard drive. What do you suggest me? Tony.
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
-
I just had a new hard drive installed with XP, and no matter what I set the resolution to, everything now looks stretched horizontally. I don't have this problem with the old hard drive containing XP
If you did a clean installation of XP, then you must install the hardware drivers for your components. Go to the website of the manufacturer of your PC, then download and install the latest Windows XP drivers for your model.
SC Tom
-
I got a new hard drive installed in my laptop. The difficulty to reconnect my printer.
Recently, my computer crashed and I had to have a new hard drive installed. When she came back to me I found that my printer to be connected to my laptop. I tried to use the disc that I used when I purchased the printer. But now, with this new hard drive, I need to connect to the printer to my laptop once again, and I have a problem that I can't fix it. Please can someone explain what I need to do?
Thank you.
From Internet Explorer
Original title: I got a new hard drive installed in my laptop. I need to reconnect my printer with my laptop - problems with this. Help, please.
Hi Jessie,.
Unplug the printer first. Insert the Driver CD for the printer. install by clicking on Setup. continue when asked to connect the printer and connect the USB cable to the laptop. There is not any question...
-
I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer. I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac. I'm trying to change my password, but you must enter the old password and it does not recognize the password. I tried every password I use and nothing works. How can I change or get a new password?
Reset the password.
OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan
Shut down the computer.
Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.
When you see the Apple logo, release the keys.
Wait until the OS X Utilities window appears.
Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".
in the menu dropdown.
Terminal window is displayed.
TypeRegeditdans resetpassword and press enter on the keyboard.
Reset Password Utility window will open.
Leaving the Terminal.
Select Macintosh HD, if not already.
Select the user account in the menu popup box under "Select user account.
Enter a new password.
Re-enter the new password for the user.
Enter a hint.
Click on the Save"" button.
Click in the menu bar, and then select restart.
Open a session.
When Keychain dialog box appears, select "create new keychain".
-
Original title: window 7
Hi can one tell me how to get a product key, that I had a new hard drive installed in the computer shop and it seems that there is no key for windows 7, I just brought Office 2016 and he did not finish the load down with the windows key 7.
Because Windows 7 is in limited stock because Microsoft ended sales in October 2013, this created demand due to its rarity. This means the retail boxed copies request a bonus, while the OEM System Builder copies remain affordable.
Full version (retail):
-Includes the rights of transfer to another computer.
-Does not require a qualifying earlier version of Windows.
-Expensive
Upgrade version (detail):
-Includes the rights of transfer to another computer.
-require a qualifying earlier version of Windows.
-Expensive, but less expensive full version
OEM System Builder version:
The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:
-OEM versions don't offer any free direct support from Microsoft technical support Microsoft
-OEM Licenses are tied to the computer first you install and activate it on
-OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard
-OEM versions does not move directly from an older Windows operating system
There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.
You can find software OEM System Builder of dozens of online merchants. The current price for OEM Windows 7 Professional Newegg, for example, is $ 140. When I checked a few minutes ago, Amazon offered packages OEM Windows 7 Professional from several vendors at prices ranging from $ 101 to $ 150. When I checked earlier, a package specifically designed for reconditioned PCs cost only $ 50 for a 64-bit copy.
There is no technical limitation to prevent you from using OEM software on your computer, although this software only works for a clean install, not an upgrade. In the past, Microsoft has been remarkably inconsistent in his advice to clients on the question of whether this practice is allowed. (See "is allowed to use Windows OEM on your own PC? Don't ask Microsoft. »)
-
I had to get a new hard drive installed on my computer how can I reinstall the creative cloud? Do I first have to use the trial version?
Hi Robin,
Please refer to the help documents below to download the application Adobe CC:
Download, install, update or uninstall applications
Kind regards
Sheena
-
Satellite M30x - new HARD drive does not work
Hello.
I am installing a new ATA 2.5 "internal hard drive for my Toshiba M30X-166. The drive is a Seagate Momentus 5400.3 120 GB model. The laptop does not recognize the disc and no related error message appears, and in the BIOS, it shows as "HD not available."
I put this drive in an external USB - IDE enclosure and was detected by my desktop PC, and I was able to partition and format the Momentus, so I know the drive is indeed work, but my M30X still does not detect the drive.
What can I do to make the laptop recognize this unit? The BIOS M30X is: Phoenix EAL20 version 1.90.
Thanks for your help.
Hello!
Have you tried another HARD drive? The new HARD drive is may not compatible with the laptop or does work does not correctly.
Normally, a 120 GB HARD drive should work because the laptop has a limitation of LBA 28 bits and so you can only use hard drives 120 GB.
In the worst cases, the HARD disk on the motherboard controller is defective :(Good bye
-
Problems of new messages after the new hard drive installed.
Just had to have a new hard drive, motherboard, and installed video card. Used to be I could click the "e-mail" on my desk and my new email would open automatically when the Windows Mail open. Now, I can't my new e-mail unless I have manually click on the send/receive button. I have the parameters monitored to check for new messages every 5 minutes. What am I doing wrong now?
Thanks for any help!
Yes, I use Vista, funny... it's windown help that popped up for me! Sorry!
It is ok. For most wanted if sure we had dealing with. This is the forum for Vista for the future.
Vista implemented network, electronic mail and to get online
http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threadsTools | Options | In general. East: send and receive at startup checked? Also try to set it to 6 or 4 minutes. Send yourself a test message and immediately close WinMail. Wait a minute, then open a WinMail. A little luck?
Bruce Hagen
MS - MVP October 1, 2004 ~ September 30, 2010
Imperial Beach, CA -
installed a new hard drive install vista and full custom
I bought a new hard drive for my laptop and I tried several times to re - install windows vista, I have not yet defined a partition, but I don't think that should affect the initial installation. I can get windows installed the first reboot and after it goes to a screen installation complete and remains on for about 20 minutes, after that I get a black screen with a cursor. I'm clueless as to what is the question.
Hello
You can't push Dell by providing Microsoft DVD
but you can ask
all they do is provide you with a way to reinstall vista, they have done
HP is one that you hear about with replacements parts not OEM
This is Dells use this DVD
________________________________________________
or borrow a microsoft vista dvd. not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
________________________________________
and try the Dell support forums
There have your same problem
-
I have the original Vista OS on my desk m9452p. IM is about to install a new hard drive. Vista doesn't let me start dvd via the Recovery Manager. Is anyway that I can get around that, if not I have no way to load an operating system on my new hard drive. The former there is also a factory recovery disc recorded in it. Is that I'm screwed and a new OS.
The intent of the recovery Partition is to reinstall the operating system as it was from the factory. For Vista, which won't be a HUGE back. Are you sure this is what you want? This means that all the updates and everything you've added since then (when you first started the computer, when it's new) will be lost. If everything works with the old hard drive, I would use a cloning software to make the new drive hard all along with the former. This way, everything is kept. If you mind not to return to the "cool facorty" PC then use the set of recovery DVDs that you made when the PC was new, or make one now. See HERE
-
New hard drive installed in W530. Is not found, are not, not recognized?
Just installed a second hard drive in my W530. I removed my CD drive and replace it with:
ThinkPad 9.5 mm 4K 1 TB hard drive II (5400)
plugged into a:
ThinkPad SATA Drive Bay adapter III 12.7 mm
Followed all directions, off battery power, removed.
When powered on I can't find new hard drive anywhere. Not in my computer. Where is he?
I even updated my BIOS to ensure that it was not if.
Please help. Greatly appreciated!
Back to manage and format?
Also make sure that he gave a drive letter.All of this should also happen in the previous wizard, however.
-
Sleekbook 4-1115dx: new hard drive installed on 4-1115DX
Hello
I recently lost my disk hard but fortunately saved using AOEMI Backupper. I bought a new hard drive 500 GB and installed but now it was ' 32 GB SSD Drive is redundant?
How to re - activate the fast RAID boot drive. When I use the software RAID is watch the 32 GB drive connected a 0 GB of disk. My new drive then shows below. I can't talk with the new SSD HARD drive. I did something wrong, because I can't seem to find an answer.
PS UEFI installed but eventually wipe all drives inc recovery drive when the HARD drive crashed.
Thanks in advance guys
For some reason, it's not unusual on a HP. You must break the existing table that has the mSATA player trapped. It is "degraded". You must cancel the table and then the rebuid it and then use to speed up. You can do this via the tab 'manage '.
-
My Dell has had some problems (patially due to age), so a buddy of mine and I put a new hard drive in it and then installed windows XP Pro. Installation went great, but now that it's installed, I can not get the screen resoultion to change and I can't connect to the internet. I feel like with the internet, can I have a driver problem. I know that the internet works, I'm on it with the laptop right now. Any suggestions?
???? I'm not sure I understand your question. You download the drivers to a place, you will find them, as the office. If you want to put them on a USB stick, copy the files downloaded to the key and take it to the computer target. Copy the files on the computer desktop. Double-click on a file and it will unpack the installation routine starts. Follow the installation wizard. Reset when said to repeat as needed until all the drivers, etc are installed. Subsequently, you can delete the downloaded files from Dell (from installation .exe). MS - MVP - Elephant Boy computers - don't panic!
Maybe you are looking for
-
Does anyone know if Apple will release an update so that the iPad can save videos in slow motion
I would really like to know because it would be a great feature on iPads, although I have a mini 2, should be by far have the ability to record slow motion and this would be great because it has a large screen
-
Satellite L500-14 X - battery does not load after upgrading to Win 8
Hello after upgrating my laptop to win 8 battery continues to charge...the message says... "pluged but no current charging"... Any suggestions... except to reinstall win7...?
-
EliteBook 8560w: startup stops at the HP logo
EliteBook 8560w, 8 MB ram, Intel i5 - 2540M to 2.6 Ghz, AMD over-pants M5950 Computer was working fine without any problems. Windows Update, now stuck on startup with HP logo on the screen and the text "press the ESC key for startup menu '. ESC key d
-
HP Scan &; Capture app can't find USB printers
I have a HP Photosmart Premium c410a and with success use application all-in-one HP and HP Scan and Capture app, with the printer using wireless on Windows 8.1. I currently trying to clear up the office and have a lot of scanning to make and have a n
-
Is there an application that can automatically download and unzip the files in a folder?
I need to download a zip file on the site of the ECB on a daily basis and extract the zip file in a folder. Y at - it no (cron or batch or) operation I could set up on my computer to automate this procedure on a daily basis (assuming that my pc is on