Satellite P750 - Soft Touch keys no longer work, nor of the FN keys
Recently my soft keys touch has stopped working. My laptop is only around the age of 4 months. Had been working fine so far. No new software had been placed on the laptop in the week before the soft keys touch, stop working. I tried to use the FN and function keys, but they did not seem to do anything.
I tried to push for a restoration of the previous system with no result. I uninstalled and reinstalled the value added together as suggested several places in this forum and most who did for me is to kill internet bandwidth and my time.
Is there a solution for this or I have to send this to a warranty repair?
I noticed you want it seems to be a common problem across all series of portable computers satellites. Is there a common error here?
Any help is appreciated.
Hello
Next to the installation of VAP, the Support of Flash memory card utility must be installed also.
The control of the utility Support of Flash Card FN buttons
If this is not enough, you have another option: you can get laptop to factory of course it is method ridiculous because the HARD disk should be formatted in such a way case before doing this, backup data, first.
Tags: Toshiba
Similar Questions
-
Satellite S50t-B touch screen no longer works
Hello
My partner bought a S50t-B Satellite probably 5-6 months and everything worked perfectly, until she had a few updates to windows that has happened, and now the touch HID compatible drivers are apparently disabled in Device Manager?
The touch screen no longer works, and I've pretty much exhausted all the options I could think.
I tried to reinstall windows, apply all updates via the service center, I can't find the drivers for the touch screen on the support Web site downloads section and the bios etc is all to date.
I was hoping someone could shed some light on how to proceed with this issue, since the main reason, she bought there the touch screen function.
Thanks, Keegan
Post edited by: keegz
I don't have any idea what system you have installed, but if the laptop was equipped with touch screen, additional drivers for touchscreen are not necessary.
If touch screen is working properly, the Windows (Win 8.1) should detect it automatically.What Satellite S50t-B-ooo do you excatly?
From my point of few, the laptop must be set to settings factory just to check if its really a software related issue... so I wonder why you do not use HARD drive recovery or recovery media to restore the laptop to factory settings? -
Satellite U840T-103 - touch screen no longer works
So, I got the computer toshiba laptop for a little over 3 months and run since version 8.1 Win.
Laptop computer and touch screen worked fine until today, when it comes no longer responds to my touch.
The laptop has always he has touchscreen, it just doesn't work!
Any ideas?
Thank you
Adam.Hello
Go to the control panel (Windows key + X-> Control Panel)-> Tablet PC setting.
The first display tab contains options such as configure screen stylus and touchscreen.
Here, you should be able to start the installation program and identify the touchscreen.
The first option must contain 1 internal LCD
At the bottom, you might find button to calibrate and reset the settings for the internal LCD.If this does not work, the problem might be related to a hardware malfunction.
In this case, only a technician would be able to help you. -
Satellite C50 - A touch pad no longer works
I bought a new laptop of C50 - A satellite but the touchpad has stopped working.
I tried updating driver but says I have the latest version of the driver.He worked for a few seconds after switching on, then freezes.
My usb mouse works.Don't know what to do.
Hello
The user Tom is right: the touchpad can be enabled and disabled by using the FN + F5 key combination (or F5 only in case of special function mode is activated)
In case this does not help, try to install the driver for the touchpad Synaptic and the Alps from the page of the Toshiba UE driver. -
Touch is no longer works after upgrade to 9.2 this morning. I reset all the settings and can not get readmitted prints. Ideas? THX
Try resetting your device. This will not erase your data stored on that device.
- Press and hold the sleep/wake button
- Press and hold the Home button
- Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.
Alternatively, you can go to settings - general - reset - Reset all settings
If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.
Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.
As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.
More info here:
https://support.Apple.com/en-us/HT201263
If these steps do not work, contact Apple and ask for help.
-
My CS5 serial number no longer works. Should the initial charge be struck out?
My mac has been cleared and had a clean install with el capitan. My extended version of CS % CD serial number no longer works. Should the initial charge be registered? If so, how?
[Left the lounge general Forum for a place that is more likely to be able to help and short title - Mod]
Just to give you a bit of a warning, likely of CS5 does not work on El Capitan without issues - according to which apps you are trying to use.
If you disable your software before wiping the machine, you will need to contact Adobe. You will need your serial number or the handy Adobe Identification Code .
Before you get much too far away from yourself, you could consider to put back your old operating system on this machine so that CS5 will actually work without problem. (Or just to get a subscription to the CC. It includes CS6, CC, CC 2014, CC by 2015 and whatever they call the version that just came out two days ago...)
-
With this new update (2.1.0.108), sync no longer works, what's the problem? Help, please!
Have you checked this:
- Accident every minute or so, after an automatic update to 2.1.0.108 - Adobe database synchronization
- https://helpx.Adobe.com/x-productkb/global/creative-cloud-crash-core-sync.html
Concerning
Stéphane
-
Satellite Pro L550 - Mute button no longer works
I ran a few Toshiba and other updates on my Satellite L550 and now its secret key on the keyboard no longer works.
Can someone help me?Kind regards
Dirk
Hello
> I ran some Toshiba and other updates
In this case, I recommend a restore of the system to an earlier point.
Check this box!Which is a good example to never touch a system running! ;)
-
Portege M930 - entry of the finger on the touch screen no longer works
Got one of these
https://www.MyToshiba.com.au/products/computers/Tablet/M930/pdw04a-00c001/specifications
Is no longer able to use the entrance of finger on the touch screen.
Pen works on touch screen OK.It's like if I had accidentally disbled it somehow.
Cannot find any reference to a key or switch to toggle finger on the touch screen to enter the manual in pdf or google.
Does anyone know how to re activate the finger of entry for the touch screen on a toshiba portege Tablet M930?
Hello
The fingertouch can be disabled.
Go to the control panel? Pen & touchin the Pen and Touch Settings window, click on the contact tab
Check or uncheck the checkbox next to your finger as input device
Click on apply and then OK -
Satellite A300 - 10 M - adapter no longer works
I've had my Satellite A300 - 10 M for 5 months now.
Today the power adapter went 'pop' (literally with a ' pop' sound) and no longer works.
Battery is fine, computer laptop is fine, it is just the power adapter.I have the reliability of refund thing so I phoned this number first, but they are not open on a weekend.
Since this is a day Bank holiday here in England, I will probably be able to get through until Tuesday.My warranty will cover the replacement of the adapter?
I have to send my laptop in, or will they send just the replacement AC?
Thank you
Hello
Of course the warranty would cover the replacement of the power adapter.
As far as I know that the international standard warranty covers all parts of a year long laptops.
Your laptop is 5 months old and so the warranty should still be valid!
Get in touch with your ASP your country and ask for help!
Greetings
Chad -
Satellite R10-101: touch screen does not work in tablet mode
Hello
I just bought a Satellite R10-101 laptop / tablet.
The machine didn't come with a stylus, so I'm not sure if the touchscreen works or not.
When the machine is in tablet mode touch screen is unresponsive to a contact with a finger. I tried a pointing device of a Windows CE handheld that has a touch screen, but it does not work on the touch screen of the R10.
The touchscreen should be enabled or that I have to get a Toshiba stylus?
The computer is running Windows XP Tablet Edition. Will I get the same functionally if I update to Windows 7. Material of the R10 is compatible with Win 7?
Thank you for any help or advice.
Joe
Post edited by: Joe Blow
Hello
The display panel works as a touch sensitive digitizer screen.
You need the stylus to use the touch screen in tablet mode.I think you can order the stylus lack of authorized partner Toshiba in your country or google for part numbers: P000407550 or P000445420
-
Satellite A100-491 AV-buttons no longer works
Hello
All of a sudden my (internet and cd/dvd) av buttons right on my keyboard no longer works and I don't know anymore I changed some options.
Can someone help me?Thank you very much!!
Hello
Try please roll back OS to an earlier time using System Restore tool. Maybe it will help but if not check Toshiba control utility and try to reconfigure the keys.
Please report on the results.
-
Satellite L500 - touchpad & CD are no longer works
Dear Sir
I have laptop Satellite L500. I have problem with the touchpad and the two losses cd-rom functionality.
Once I click on the touchpad cursor not moving not and he touches also does not work.
Please give me solution to this subject.I have try the installer to load default setting, then also it does not work.
Please give me solution to this subject.
Thanking you
Sandeep.Best way to test the functionality is to reinstall the original recovery image and test the material with the settings.
Please use recovery DVDs discs, if you have created them, or use the option of HARD drive recovery - http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm -
Satellite Pro L20 USB ports no longer work
Hello
A little bit ago, I experienced a few problems with my Satellite Pro L20. After he brought to life, I found out that the USB ports no longer work.
Things I've tried so far:
Reinstall the chipset drivers
Update the BIOS.
Ensure USB is enabled in BIOS
Uninstall and reinstall the USB controllers via the Device Manager.The USB ports no longer work and I ran out of things to try. Any suggestions?
Thank you
Hello
If possible, try to install the operating system with recovery media. On this way, you will have to factory settings. It's the best test you can do. If the problem persists, it may be a malfunction of the equipment. Sorry but on this path is not easy to tell what the problem may be.
-
Satellite P750 - Multi Media buttons do not work
In recent days, multi media buttons (i.e. buttons to increase or decrease the volume, brightness, etc.) do not work.
My laptop Details: -.
Model number:-Toshiba Satellite P750
OS:-Windows 7 64 bit.Have you installed any updates last days?
What you can try now is to reinstall Toshiba Value added package.The most recent version can be downloaded from the Toshiba download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
Check it out.
Maybe you are looking for
-
Hello My macbook pro has been gradually becoming slower and slower. The crash of the apps and they take forever to open. Once opened, they are always slow to exploit. I don't have much free space, and despite this, I deleted so recently in the hope t
-
Satalite Pro >; Power lights but nothing else?
Hi all A small question. Received a Satalite Pro. The power turns on but nothing else.I tried the HARD drive in my m200 Portege and its XP Pro running. The Satalite Pro has 1 > 512 MB ram stick inside. The overall condition is good and I'm tempted to
-
I need to know if I can do something to get properly applied statistics, including the free cells. [Moved from the community centre of Participation]
-
I have 4 PC running XP Pro with all the latest updates. This problem occurs on two of them, possibly due to recent updates. I checked the file types and noticed that there are types of folder and file. I checked the properties of the shortcut and
-
Pavilion 15-p025AX: can not find the drivers for my laptop
Hello I need drivers for my laptop and the site where I'd usually get coming (http://h10025.www1.hp.com/ewfrf/wc/product?cc=au&dlc=en&lc=en&product=7169846) does not work. Is there another page where I can download the drivers? The laptop is the HP P