Satellite P750: Unable to connect to the other PC with WLAN

Satellite P750 was working fine until yesterday.

Today, when you use the Atheros AR9002WB-1NG wireless adapter I can't connect to the other pc on the network.
However, I can connect to the internet ok.
Other pc can not see me either.

* When I use wired everything is ok *.
I tried to stop the antivirus and firewall, but it made no difference. I reinstalled the drivers and etc. shares checked file.

Can anyone help please?

Advertisement

Hello

You should enable the option called Ad-hoc to peer option in your WLan settings!
Go to network connections
Select connections-> properties-wireless
Add the new network
Here you must configure this (insert SSID, encryption, and password), and don t forget to check this is a computer-to-computer (ad hoc) network

Tags: Toshiba

Similar Questions

  • Satellite L650 - unable to connect to the public network (has no valid IP address)

    Hello

    Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

    I have visited many forums and did everything, but of no use.

    1. people with disabilities the tcp/ip V6 of the registry.
    2. the DHCP is enabled. With the help of the automatic IP (DHCP)
    3. also tried with a static IP configuration.
    4. uninstalled the antivirus provided with laptop computer (Norton).
    5 disabled the windows firewall.
    6. restored to factory settings.

    I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

    Can someone please give some other suggestions for this problem?

    Hey,.

    Can you connect to your home WIFI router correctly?

    If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

    What you can try is updated WLAN driver from Toshiba's official website:
    http://APS2.toshiba-tro.de/WLAN/

    If it doesn't work, ask the person contact I mentioned.

  • Unable to connect to the HP ePRINT with Color LaserJet Pro 400 M475dw MFP website

    LaserJet Pro 400 color multifunction m475dw-Just installed. Print, scan, copy and fax all works fine! use of WiFi

    Using IMAC OS 10.8.2 with all updates

    Netgear DGN2200v3 router using

    Printer not connect to the HP ePrint website

    Printer connects using Hp and profile for fax set up etc.  But the "HP Web Services" article when enrecorded and hit the Activate button - it does not connect to the site - it seems just to refresh.

    "If I try to connect thro the printer not the imac and try to activate the web services, it says" connection "on the screen BUT after a few minutes of trying - so says" CONNECTION ERROR - the printer is unable to connect to the service. Check the internet connection

    ANY IDEAS - HAVE I MISSED SOMETHING?

    Thank you very much

    I try to pull up the built-in web server (EWS) by entering the IP address of the printer in a browser and set a static IP & DNS address.

    The information for the default gateway, subnet mask and IP address can be accessed from the Setup menu on the front panel, go to settings > reports > network summary and it will print off the coast.

    Once you entered the IP address in a browser and have the EWS pulled up, go to the tab above titled "Networking". Then click on IPv4 in the left column; who will bring to the top of the address configuration page.  Place the manual radio button and fill in the IP address, the default gateway and the subnet mask with the information from the report. You don't fill the part entitled WINS server, which can be left alone.

    You will then want to fill in the DNS of the page part, the favorite should be set to 8.8.8.8 and the alternative/secondary must be set to 8.8.4.4. Then click 'apply '.

    Power cycle the printer. Turn off the power, wait 30 seconds and then turn it back on. Once it is fully operational, try again to connect to web services.

  • Satellite P750 - unable to connect an external display via the VGA port

    Hi all

    My problem is the following:

    I tried to connect my P750 (running on W7 x-64) an external display using the VGA cable port. Unfortunately, these devices recognize my phone. Laptop does not recognize the external display, you can see in the graphics settings as additional display, but the screen shows "no signal".

    The computer always identifies the screen correctly, so it seems that there is communication from the screen to the PC, but not the reverse.

    This has been verified with 3 separate screens and television - still the same. All the screens work properly with the other PC.

    I already have:

    -try to play with FN + F5 / "windows" + buttons P - no change
    -install the latest drivers BIOS and video site Web from Toshiba - no change

    Suggestions how to operate? Is it possible that the VGA port is faulty?

    Thank you in advance.

    Hello

    You have the same problems with a HDMI output port?
    Usually, you don't need to change anything to get the external monitor works.
    Press Fn + F5 several times until the monitor RGB (VGA) was selected
    Since you can choose an HDMI output too, you should pay attention to this option.

    Have you tried to change the resolution before using the Fn + F5?
    It s worth a try

    Last but not least, you could set the default BIOS (press F9 BIOS and save the changes by pressing F10). But I don't very well if the BIOS contains some parameters of port RGB (VGA) m

  • Satellite L670 - unable to connect to the Bluetooth

    Hello

    I am trying to connect to the bluetooth on my Satellite L670. The driver is downloaded but it not to finalize the installation. He's always asking to connect to the laptop computer, a bluetooth device.
    This laptop have bluetooth? If this isn't the case, I can use a USB bluetooth (all?) to connect a bluetooth device.

    Thank you for your support

    Hello

    > This laptop have bluetooth?
    What model of L670 you have exactly?

    You can check the specifications of the laptop on the official page of Toshiba.

  • Satellite A60: Unable to connect to the internet via a modem - no dial-up

    In my Satellite A60, WinXP Home, when I try to connect to the Internet via the modem of Toshiba, I get error 6: handle not valid, and after a few attempts, I get error 50: all devices connected / request not supported.

    Device Manager / network / card Asynchronous RAS displays an error (black exclamation point on a yellow background).
    The driver is asyncmac.sys = MS Access Remote network serial driver.

    I have:
    -tried to uninstall the RAS asynchronous card, but no luck, didn't say it may be necessary to start
    -modem uninstalled / reinstalled
    -update of Windows XP through windows update
    -update of the bios / modem / network drivers from Toshiba

    No luck, the RAS asynchronous card error is still there.

    Any suggestion?
    Thank you
    Alessio - Italy

    I think that this problem is Windows XP and map Asynchronous RAS, not the modem.
    The modem correctly composed the number, negotiates the user and the password, and then I get error 6 and 50.
    On the internet I found this tip for uninstalling and reinstalling the RAS asynchronous card:
    http://forums.practicallynetworked.com/showthread.php?t=6781
    I followed the instructions and run RArepair.exe.
    It uninstalls and reinstalls the map Asynchronous RAS, but RAS is still in error (the yellow field in the Device Manager).

  • Satellite A500 - unable to connect to the WLan

    I'd like someone to help me.

    Have recently bought a satellite A500.
    I'm new in the world of laptops so I'm wrong.
    I connected to a router via a modem, the two netgear, the news.

    Had the two config for my network. Works well as long as ethernet is connected to the router of computer.

    My wireless icon on the front of the laptop is orange.
    If this should be green as the router?

    Pressing FN f8 it tell me wireless is connected.
    When I remove the ethernet cable it tell me to fix the problem, I need to plug in the ethernet cable.
    But I want to go wireless, I'm sure I'm missing something.

    Rang netgear but after that my router and it is not connected to wireless technology they could help me more.
    I use windows7.

    Thanks to anyone who can help me.

    > My wireless icon on the front of the laptop is orange.
    > Should it be green as the router?

    The WLan led can only be ON or OFF. If the light comes on (any color) then it means that the Wlan switch is on!

    It seems that the WiFi is enabled. In this case, you will need to properly configure the WiFi network.
    You can use the own WLan settings in Windows or a Wlan configuration tool like Intel ProSet utility.

    First need choose the right SSID (wireless network name), right of encryption (WEP, WPA, etc.) and password encryption.
    Please note that all of these parameters should be the same on the router WLan and WLan configuration software!

    Please check if the firewall does not affect the connection to the internet as well!

    PS: make sure you use the latest version of the WLan driver
    Here you can find the drivers:
    http://APS2.toshiba-tro.de/WLAN/

    In addition, search and read comments here on the forum!

  • Satellite L300 - unable to connect to the wireless network

    I have a NETGEAR router and a Toshiba Satellite L300 laptop HP DV2000.

    The HP can connect to my wireless network and also my neighbors network next door (which is not secure)
    However, the L300 can only connect to the network of my nextdoor neighbour even if it can 'see' the NETGEAR network.

    I changed the security from WPA to WEP up to now no security at all, and it seems not to matter.
    The strange thing is that my L300 CAN connect to a wireless network, but not mine!

    And my wireless network works as I can connect from my HP laptop.
    On the L300 it shows 5 bars on the NETGEAR is not a problem of weak signal.

    Any help would be appreciated.

    Try changing the WLAN settings on your router. Compare the WLAN settings on the settings of your laptop and the router.

    Test it with standard B on both devices.
    I mean if your laptop can see neighbours WLAN card wireless network in the laptop must be OK.
    I really thing all is due to wrong WLAN settings.

    Play around with that sort of thing.

  • Satellite L20: Unable to connect to the internet using mobilephone & dongle BT Mecer

    Hi all

    Mine is an edition of Satellite L20.
    I recently installed XP Professional Service Pack 3. I connect to internet using my USB cable with my Sony Ericsson C702 (use the phone as a modem).

    Since there is no bluetooth built into my laptop.
    So, I bought a Mecer bluetooth dongle. I installed the bluetooth software. Can I transfer data between my laptop and my mobile phone via bluetooth.

    Now the problem is I can not connect to the internet via bluetooth. I opened my bluetooth IVT software and paired my laptop and mobile computer. Then I opened my Sony ericsson suit and looked for my mobile finds, my mobile and still once he pairs with my cell phone and when he tries to connect with my mobile phone its shows "device cannot be detected, try again." I tried to reconnect, not matching and pairing it several times, but no use.

    I also found one thing, just after it displays "Device cannot be detected," a pop-up message "SEPCSuite.exe has encountered a problem and closes the window with options."
    1) send to microsoft
    Including 2) send.

    What can we do to fix this problem?

    No idea...?

    See the website of your provider of Bluetooth software to help. This forum is for Toshiba Software only.

  • Satellite L - unable to connect to the internet

    My laptop for some reason any does not connect to the internet!
    When I run diagnostics it says that there is something to do with the Windows Firewall, but when I have my remarks with the firewall that it used to always let go me on the Internet even if a connection is present.
    Restore factory will help?

    I also have the restore CD/DVD thing, but I'm a bit confused as the product key on the bottom of the laptop is different than at the back of the CD case.
    At first I thought that it would be grandpas CD/DVD as it also has a Toshiba Satellite but when I compared its product key on the CD/DVD was different.
    Is how important it?
    If this is not the case, when restoring to factory settings what product key can I use the CD/DVD or on the bottom of my laptop?

    Please help I need 2 fix this problem quickly, as soon as possible!

    Hello

    If you want to install the operating system and to have the factory settings, again, you must not enter the activation key. It is already enabled for your laptop model and you can use it so often desired. Please don't be confused on this issue. Everything is OK with him.

    What about your Internet connection?
    As you wrote: for some reason any does not connect to the internet!
    If you do not know the reason how should we know it. ;)

    If the network adapter is properly installed, I guess some false parameters are responsible for this.

  • Satellite A300D - unable to connect to the router

    I can't connect to my wireless modem that works correctly for other laptops at home.

    I bought this phone 2 weeks ago and when I discovered that it can not connect, I took it to the shop, I bought it. Here, surprisingly it connected to wireless internet so they told me that there must be sth wrong with my modem. I reinstalled my modem but still not good. I can connect with other laptops that have vista as well.

    I can view the connections. Sometimes, he tells me that the password is wrong that I'm sure I get right! I even tried to completely disable password security, then it seemed like it was connected, but I could not access Web sites, including google.com. Sometimes it is said that id verification timeout. I reinstalled the wireless driver that did not work. He has no problem with the connection to the local network. I almost tried everything but still can't connect.

    Help, please!

    Hello

    Why you try to reinstall the modem driver if you have a problem with your wireless network card?

    Anyway, if you can plug it into the router in the shop everything should set up and installed correctly on your laptop and the reason must be the router.

    So in your case, I would try to update the firmware on your router.
    If you use DHCP, try static IP addresses. Try to also disable filtering of MAC addresses and try another encryption, e. g. WPA2.

  • Satellite L510 - unable to connect to the mobile phone

    Hi, I have a question and hope to get a solution for everyone! I use Satellite L510 run with Windows vista but the problem is that I can't connect my bluetooth with nokia 5230!

    It can connect to the nokia 7610 and 7610 connect to 5230 also no problem. So I'm just wondering why the laptop can not pair with my 5230! Thank you!

    What error message do you have? What is the last message on the side of the phone before the error occurred?

  • Re: Satellite L770 - unable to connect to the WiFi N project

    I can connect when I set my router "mixed b/g/n" but only 54 Mbps but if I change the router 'one n' while I can find the network but cannot connect. My most old laptop, Satellite L500D can connect mode "n" without any problem. These are the only devices connected wirelessly and the problem persists if old pc is turned off. In the interface of the routers, I see my connection has / g, older Satellite mode shows n mode as it should.

    Drivers are updated, router D - link DIR - 615 with the latest firmware.

    Hi JP75,.

    What exactly happens if you try to connect to the router N project? You get an error message or what happens?

    It is not easy to say why the works of N doesn't correctly project but first of all, I would try a driver WLAN official Portal of Toshiba:
    http://APS2.toshiba-tro.de/WLAN/

    Is it in eco mode / normal too?

  • Satellite L500D - unable to connect to the hotspot free

    I have Satellite L500D and when I connect to the freedom of a hotspot Wi - Fi with no pc security says connected without an internet connection. As PC is brand new, I have ran troubleshoot-made said something on the cards to reset but no result. PC poster networks, connects but won't give internet.
    I see girls download via vUtiliser, but do not download.

    Please help I won't feel stupid if I missed something stupid.

    Hey Buddy,

    Can connect you to your WIFI router at home?

    Usually for these free hotspots you need a key of the owner to access the Internet or the MAC address must be allowed.
    In addition, the correct TCP/IP settings should be used as well.

    I put t know how this works exactly, but if you have problems, you should ask the owner of this hotspot WIFI free. Generally, they can give you more details about this.

  • Satellite L650 - unable to connect to the internet after the clean install of Windows 7

    Hi guys

    IM really angry because I just finished installing a new copy of w7 on my laptop (upgrade home pemium to proffesional) and now the ONLY way I can connect to the internet is via a usb device.

    I even tried ethernet and no luck.
    The screen display resolution is also mucked up.
    What can I do?

    Also reset it to factory settings make me reinstall it home premium?
    If so I'll do that but I need to know if this is the case, please

    its a PSK1JE L650 btw

    Post edited by: bilal98

    > I tried Ethernet and no luck.
    > The screen resolution is also mucked up.
    > What can I do?

    You must install the necessary drivers.
    For internet connection, you will need to install the LAN and WLan driver.
    To get the best display resolution install display driver

    > Also reseting it to the factory settings let me reinstall it home premium?
    > If so I'll do that but I need to know if it does, thank you

    Looks like you have already done this as posted here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=68031

Maybe you are looking for