Satellite P755 - 11G: Win 7 64 bit - cannot activate BT after replacement of the module

Similar Questions

• Satellite M100-126 - Win 7 32 bit indicates 'only' 3 GB of memory usable

  Hello

  Here's the situation:

  I have a Toshiba satellite M100-126 (PSMA1E - 0PV021FR) running Windows 7 32 bit.
  He had originally 2gigs of Ram, but after that my brother's cell phone broke down (motherboard failure) I took his 2x2gig of ram and installed in my laptop.

  Initially, the BIOS detected only 3gig, so I flashed the bios than that recommended by the Toshiba Download Center, i.e. v 3.0, http://support.toshiba-tro.de/tools/eula/calleula.asp?ID=66238 direct link (if it works). There is also a version 5.6, only for Vista, but I did not use that one.

  For now: the bios detects 4gigs and Windows, but windows says 'only' memory usable 3gigs.
  Windows resource allocation, 1gig is 'reserved material', so this memory usable 3gig. If I replace one of the modules by a 1gig module 2 giga, I get only 2 MB of the reserved equipment, and 3 gigs installed memory are usable...

  Here are the questions now:
  I am aware of the limit of memory for 32-bit systems, and that I won't be able to use the full 4gigs of anyway, but my brother got 3.5 GB of memory can be used on 32-bit system... Is it

  Hello

  Win 32 bit can allocate only 3.2 GB (not 3.5 GB)
  It is the limitation of all 32-bit operating systems.
  I put t see any problems here the BIOS detects 4 GB of RAM. It s ok.
  Windows can use 3 GB only because the other party is used by the graphics card.

  The GPU can share a part of the main memory too and it also depends on the available main memory.

  Good bye

• Satellite A505-S6025: Win 7 64 bit - driver ACPI\TOS1901 fails

  I have this problem and my phone freeze.
  If anyone knows what it is and how I can solve this problem.

  Thank you!!!

  failed to load the ACPI\TOS1901\2 device driver\driver\fwlnk & daba3ff & 2

  Hello

  Install the Package added on the value of the Toshiba for Win 7 64 bit and check if this will solve your problem.
  The driver of ACPI\TOS1901 seems to belong to the package of added value

  As I m not wrong not the Satellite A505-S6025 was released in the United States. Therefore, you should use the driver Toshiba page us to get the package.

• Adobe Acrobat 7 has worked well under Win 7RC1 (32 bit), cannot create Adobe PDF Port_Printer in Win7 (64 bit)

  I had Windows 7RC1 intalled Acrobat 7 (32 bit) and everything worked perfectly.  Now, I have installed the 64 bit version of Windows 7 and get an error message "Warning 20225. Adobe Acrobat 7.0 Setup was unable to create a new item: Adober PDF Port_Printer.  The PDF Adober printer may be unavailable.                "GetLastError: the operation completed successfully."

  It is just incompatible with the 64-bit version?  Information from Adobe on the said error message is not compatibile Win 7, but it certainly worked well in the 32-bit release candidate of Windows 7.

  Question

  When you try to install Adobe Creative Suite 3 on a 64-bit version of Windows, the installer returns the error message "the file AdobePDF.dll on Windows Vista CD-ROM is needed." You are given the option to search for the file.

  Reason

  Adobe Acrobat 8 Professional is installed with Design Premium, Design Standard, and Creative Suite 3 Web Premium versions. Although Adobe has tested Adobe Acrobat 8.0 (Standard and Professional) on the operating systems Microsoft Windows 64-bit running on a 64-bit processor computer, there are known limitations. For more details, see additional information.

  Solution (Windows Vista 64-bit)
  

  In order for Adobe Acrobat 8 Professional to be supported, the application must be updated after installation.

  1. When the error occurs, click Cancel to exit the dialog box and continue with the installation.
  2. Install Microsoft has Hot Fix, such as documented in Microsoft Knowledge Article #930627 available on http://support.microsoft.com/kb/930627 Base
  3. Update Acrobat version 8.1 or later. The Acrobat update is available on the Adobe website at www.adobe.com/support/downloads/ .

  Solution (Windows 7 64-bit)

  Manually extract the 'adobepdf.dll_64 ' of the file data1.cab file before installing Acrobat. When the prompt appears, navigate to this file and select it.

  1. Navigate to the folder that contains the file setup.exe to your installation of Acrobat 8.
  2. Locate the file "data1.cab" and open it (this may require a third-party compression utility, such as WinZip).
  3. Inside the content list, locate the file "adobepdf.dll_64" and copy it to your desktop.
  4. Run the program setup.exe installation and when the prompt appears, select Browse and select the file that you copied to the desktop.
     Note: If the file cannot be selected, change the file type drown down in the dialog box to "All files", or rename the file "adobepdf.dll" by removing "_64" from the end of the file extension.

  More information

  Because the Adobe PDF printer is not supported on 64-bit operating systems, version 64 bits of the AdobePDF.dll does not get extracted during installation. So, the installation program is unable to locate him. Although Acrobat is installed, the Adobe PDF printer will not install. Following the update procedure above will address the issue.

  333360 : support policy for Adobe Acrobat (8.0.x Windows x 64)
  333780 : support policy for Acrobat 7 and 8 on Windows Vista

• Satellite A300D PSAKCE - Win 7 64 bit driver problems

  Sorry for my English - google translated

  When toshiba plans to release drivers for Windows 7 64 bit? I can't properly use my operating system, not to mention that "Toshiba recommends Windows 7", but offers no drivers for it.

  The laptop is A300D PSAKCE. every month, I'm going to the service because it gives many flaws.
  Before that, I was disappointed that the card his on my new laptop has just not record microphone, no line, no mix stereo and had to buy foreign.

  What I can tell you, is that you have to tighten a little, a lot!

  Hello

  I think that it is question of time s when drivers Win 7 would come out for this model.
  On the European driver Toshiba page, you can find other A300D series where the Win 7 driver is already available.
  You can try it on your laptop

  Otherwise keep cool and wait for the drivers will be available

  See you soon

• Recovery problem Satellite L505-110 Win 7 64 bit

  Hello

  I have a laptop Toshiba L505-110, Windows 7 64 bit Turkish and he began to slow down recently, so I want to recover windows 7, but in some Turkish forums, guys who have tried recover like that, facing a problem.

  The problem is that Windows 7 has been set up on the computer as a 32-bit.
  I had not given a dvd of the operating system of W? ndows 7 64-bit and he said that we could easily do our own recovery DVDs using toshiba recovery media creator.

  I made 2 recovery DVDs, but now I'm afraid that I have Windows 7 32 bit if I recover Windows.
  I bought this computer because it had windows 64-bit and I paid the price if I want to continue with it again...
  It has been a year since I bought my PC.

  What should I do to recover my operating system such as Windows 7 64-bit again?

  Thank you very much for your answers.

  Hello

  The operating system was preinstalled is WIN7 64-BIT HOME PREMIUM & you also got the 32-BIT DVD
  Therefore, if you create the recovery disc, then the disc should contains Win 7 64 bit.

  I think you should just grab the laptop using the recovery disk created and I think that the 64 bit, Win 7 must be installed.

• WiFi work anymore; Win 7/64-bit; ASUS Zenbook w/Atheros; SSID of the network disappears & cannot be added manually network

  ASUS UX31E (portable) Zenbook running with an adapter Atheros WiFi Win 7/64-bit.  Netgear WNDR3700v2 router.  I'm the sysop House.

  Starting earlier this year, at the start, my home wireless SSID is 'seen' in the system as 'available' tray, but not connected.

  I try to connect, and it asks for the password (WPA2).  I enter the password, and it says that the connection could not be established.

  (I have three other machines of 7/64-bit Windows and Vista computers that connect wireless fine home).

  At this stage the SSID is no longer 'seen' in the system tray.  No wireless network is available, even if I'm 3 feet from the router.  (- I live in the country).

  Here's what I tried, which none have worked:

  > Run Wizard troubleshooting, including resetting the router.

  > Of course the WiFi card was activated.

  > Of course the adapter reported it was working properly, looked IPconfig & also checked for red flags in Device Manager.

  > Of course all the drivers are up to date and that all Windows updates have been correctly processed.

  > Tried to back off the WiFi driver, but no earlier version is available on the system.

  > Tried to use a previous restore point, but none worked.

  > Uninstalled the WiFi drivers and installed later from Asus support website.

  > Tried to run Norton Internet Security.

  > Erased partition o/s and restored as long as the plant.

  > Tried to run it before you reinstall Norton Internet Security.

  > Trudged through all the updates and I have tried several times more.

  Now in the center of network & sharing, when I try manually add my network - he said: "How do you want to add a network?" and I click on 'Manually create a network profile.'  I get "unexpected error has occurred."  This was not used to happen - I could add the network, but could not connect to it.

  -deb

  Hi Deb,

  Yes its possible that change the SSID will not work. WNDR 3700v2 offers however WEP? This is false.

  Go to wifi settings.

  This router has some firmware issues.

  So, try reloading the firmware.

  And then try without any security in your router.

  If his works then fine.

  If not then try to give address static IP on WLAN & try to connect.

  Best way to understand what question is to try with another card WIFI NIC (USB).

• Oracle Forms Win 7 64 - bit error INST-07407: unable to detect the platform of the machine or pieces of JVM

  
  I'll try to install Oracle Forms 11.1.2.0 on Win 7 64 bit and get INST-07407: unable to detect the platform of the machine or the pieces of the JVM.

  I followed the steps described in Oracle Forms 11.1.2.0 on Win 7 64 - bit bit JVM error but still unable to solve my problem.

  Here are the details of the version of the installed JDK.

  C:\Program Files\Java\jdk1.6.0_45 > java-version

  Java version "1.6.0_45".

  Java (TM) SE Runtime Environment (build 1.6.0_45 - b06)

  Java for 64-bit Server VM (build 20.45 - b01, mixed mode)

  C:\Program Files\Java\jdk1.6.0_45 > % java_home Echo%
  C:\Program Files\Java\jdk1.6.0_45

  C:\Program Files\Java\jdk1.6.0_45 > echo %path%
  C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows; C:\Program Fi
  les\Java\jdk1.6.0_45\bin

  Installer: -.

  1 jdk-6u45-windows - x 64

  2 wls1036_generic.jar for 64-bit platform

  3 ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1

  Please advise. Thank you.

  I don't know if help.

  I have installed Oracle Forms 11 g on Windows Vista Home Edition (64-bit), had been an experience horrible (much testing), although eventually I got.

  If I'm not mistaken, I used this guide:

  Oracle WebLogic & Forms 11g Release 2 installation guide

• Satellite L40 - 15G - WiFi does not work - cannot activate usign FN + F8

  Hello

  I have a toshiba satellite L40 - 15 G with windows 7 32 bit and my wireless is not working, the pilot is OK
  I do FN + F8 and I can't active wireless :(

  What should I do more?

  Hello

  The Fn + F8 isn't really essential to use the WiFi network. Generally, the WiFi network should be enabled by default.
  So even if the Fn + F8 does not work, the WiFi network must be enabled.
  You see the local network card in Device Manager? Is it correctly recognized?

  Where he is, follow these steps:
  Go to the control panel (switch to the large or small icon view)-> network & sharing Center-> left column manage wireless networks
  Add here new WLan and configure it by using the right SSID, encryption and password encryption.

• Limit exceeded in my win 7 64 bit professional activation key after reinstall

  Hello

  I really need help here...!
  A few days after I did a clean reinstalof my genuine win 7 64-bit Professional (because I had problems that caused the need to completely format my PC), I received a warning of an error (something like "you have exceeded the limit of activation key")...
  It's strange because it s only my second time to reinstall and it really is a real key, and I did 'everything by the book'...!
  My win 7 will have problems in the near future...?
  How can I solve it...?
  I don't want really waste of money in the purchase of a new, and quite frankly it s not just...!

  Hello

  On top of report that I saw that Win 7 Pro is enabled through Volume Licensing.

  In addition, I would like to ask you can reach the person IT at your Institute. If not, you will need to buy a Full Edi Win 7 Pro as the foregoing is approved for commercial use.

  The product ID shows me a different Eeition of Win 7.

  You can also join the British to be helped in the case support above.

• Update of Vista 32 bit does not work after replacing the hard drive

  A month ago the hard drive of my computer (ACER Aspire 6920) had to be replaced. The disk image hard precedent (which includes the c: with Windows Vista Home Premium 32 bit, SP 2 build 6002) has been mirrored to the new hard drive. Everything seemed to work fine until I noticed that I don't have more updates from Microsoft. I tried a manual update and got the message that the update service was not working and I have to restart the computer. However, the Task Manager showed that the update service has been executed. Of course, I rebooted the computer, but nothing has changed.

  I found a whole bunch of recommendations for this issue in this forum, but nothing seems to work:

  • The Microsoft FixIT tool indicates a problem with the update of components, and then said that the problem had been solved successfully. However, the problem is still there and rerun the FixIt tool Gets the same message on a problem (yet) found and fixed.
  • I also stopped the update service, delete all content in Windows/C:\Windows\SoftwareDistribution and restarted the service. without success.
  • I've temporarily disabled my security suite (Eset Smart Security 6) and tried the update. I also have fittings the folder C:\Windows\SoftwareDistribution to the scope of the antivirus, without success. On the old hard drive, I used a different security suite so I thought that maybe the ESET (that I installed everything recently) could be the cause of the problem, but that doesn't seem to be the case.
  • I also followed the instructions provided by Microsoft at http://support.microsoft.com/kb/971058, but again, no change at all. However, it should be noted that registering some DLLs that Microsoft listed does not work (message that the DLL is not found or some server entry point (my translation, I'm using the German UI and don't know English good term; sorry) could not be found.)

  Http://support.microsoft.com/kb/947821 , I found another tool that supposedly can solve some problems of updating; I downloaded the version for Vista 32-bit, but it cannot install it on my computer (error code = 0xc8000247 during installation).

  So I'm really lost now what else to do. I would appreciate any suggestions. Please note that I am not technically very warned :)

  ARG, apologies.

  Was not aware that they had dropped support for Vista... (I myself have 'graduated' Vista earlier)

  The fact that you have not already installed TSRI is exactly your problem.

  Recent hard drives using 'Sectors 4 K', also known as 'Advanced Format Technology'.

  If the installed hard disk driver currently is not compatible with this specification,

  It will result in oddities like the status of the service Windows Update is not recognized correctly.

  Installation TSRI will fix this in most cases.

  Alternatively, if you are using Vista SP1 or later version (or 7 SP1), you can use the real driver.

  Since you are already updated to SP2, we will see if it is a viable solution.

  Go to: start-> Control Panel-> programs-> programs and features

  In the list of installed programs, locate and remove if found.

  -Intel Matrix Storage Manager

  -Intel Turbo Memory

  This should force your computer to go back to the real driver provided by Vista.

• I cannot activate my windows Vista, says the product key already in use

  I reinstall my windows vista, when I try to turn it on, pop up and says... you type the product key is already used... I don't remember copy my drive to vista... or install another computer... what I'll do... ?

  Activate Vista by phone:
  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  NOTE:
  If the activation service informs you that she has failed and cannot help with activation, thenSTAY ON THE LINE and your call will be transferred to an operator of activation which will help you to activate your copy of Vista. The operator will give you all the numbers to ID of Confirmation if they accept that your copy of Vista is legitimate.
  NOTE: The operator just explain your situation and what you did to require activation. (EX: hardware upgrade, installed Vista on a new computer after uninstalling it from the old one, etc...)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Satellite-A-C55-199 with Win 7 64 bit - cannot turn on WiFi

  Hello

  I have a problem with the wifi of my Toshiba Satellite C55-A-199.

  I downloaded and installed all the drivers I could find on the [website | http://www.toshiba.eu/innovation/download_drivers_bios.jsp] but I'm still not able to disable the wifi by pressing fn + f12.

  When I press fn + f12 bluetooth can be put into power, but the wifi symbol does not appear on the screen, and Red led front light guard.

  I don't know what could be the problem, but I hope I will get help here.

  Thank you
  PIRI

  (I use win7x64)

  Post edited by: piri

  Is the card properly installed wireless (Device Manager)?

• Satellite C660 - 1ZM Win 7 64-bit: carpet of mouse and USB - 'code 52' driver error

  Hello

  Having recently set up a new Satellite C660-1ZM running Windows 7 64 bit (upgrade from Home Premium to Ultimate) for a friend, the mouse pad and USB ports have suddenly stopped working. Pilots show an exclamation against them and the error is 'code 52' associated with the driver signing. Windows does not seem to recognize the signatures of the drivers for the published drivers that came pre-installed machine disk, so the devices do not work. I've updated the drivers (chipset Intel [which includes USB]; Synaptics touchpad) to the last published on the Toshiba web site - and we have the same problem.

  By pressing F8 at startup allows you to select "disable driver signing checking" in WIndows 7 boot options, which allows the drivers and all is going well, until you restart - how you must press F8.

  I think that among the many Windows updates has somehow messed up things, but we cannot prove easier than. The machine has been running for a week or two, then the mousepad suddenly stop working around August 8, 2012.

  (1) are there valid signed drivers who spend some Microsoft controls required for signature, including any controls they have potentially just imposed by some recently imposed update drivers?

  (2) does anyone know exactly how to disable the verification of signature permanently, drivers so a reboot will not require F8 key pressure and so forth?

  Uninstalling the mouse pad driver and reboot gives the basic functionality of the mouse, without the skill of Synaptics. However, the USB ports don't always work because their driver does not load, so an external mouse does not work.

  It's a hellish nusiance. The system of the keyboard to uninstall the drivers etc at the wheel is not fun.

  Cheers, Colin.

  Hello

  Have you received the error windows cannot verify the digital signature for the drivers required for this device? This means the error code 52
  Given that the USB drivers are parts of the Windows operating system, I don t think that this could be a signature issue I think that some files are damaged.

  Try to uninstall/reinstall the driver and remove the unit and it s drivers in Device Manager before you reinstall.
  Normally this should help, if not, well try to repair the system.

  Switch on and press F8. Then choose fix my computer.
  Now, choose the first option that would fix the system.

• Satellite new C660-1F1 windows 64-bit - cannot use graphics editing software

  Hi guys... any help appreciated... This is the message that I sent with Toshiba, but they take their time to get back to me:

  Important information: Satellite C660-1F1
  Main features
  -Genuine Windows® 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery)
  -Intel® Core i3 - 380 M processor
  SuperMulti DVD + r (Double Layer)
  -2048 MB of RAM DDR3 (1066 MHz)
  -39.6 cm (15.6 ") TruBrite® HD (1366 x 768) high brightness display with LED back light with aspect ratio 16:9

  Hello... I bought my phone from Argos a month ago, and it has a warranty of 2 years. I have a big problem - 2 graphics main editing programs I use do not work. Corel Paintshop Photo Pro x 3 and Adobe CS5 can also be installed and opened, but as soon as I try to save a picture or change a picture both of the programs crash and I must close by using end task in Task Manager.

  It happened when I installed the full versions of both programs that I bought and it also occurs when you download the trial versions of the Corel and Adobe download sites. I've been on the help so many forums for both adobe and corel and the most useful pointer came from one of the creators of Adobe - a Chris Cox.

  Very logically, it said as it happened to both of these packages that it was probably a problem with the edition of 2 graphic graphics card drivers or the real hardware graphics card. I bought a 64-bit operating system to manage precisely these 2 programs which can be exhausting on the system. I know that I have only 2 GB of RAM at the moment, but it has happened with other people... who have same 8 GB and 16 GB of RAM which is what I'll have in the next few weeks. However, not if I can't fix this problem. Please can you help/advise the best solution. This seems to be a problem only with 64-bit systems. Adobe and Corel are 64-bit capable.

  There is also a message that appears when I open Adobe Photoshop CS5 Extended... which is as follows:

  ... "Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements, visit the manufacturers of video card for the latest version of the software."

  I then click this message below... .use of the program, change something, try to save and it crashes. I have gone through all the troubleshooting directions and ran countless diagnosis but it seems to be a common denominator between 2 different programs and it's my laptop Toshiba... I even tried to install another great photo software of edition to test and I got the same result - a crash of the application.

  Help, please! Thanking you in advance.

  Kind regards
  John

  Hello John

  You already have some response from Toshiba?
  What about my friend? In my opinion the best advice you can get from Corel and Adobe. They have the best experience with own products and have probably tested on different hardware platforms.

  Computer laptop manufacturers offer models of different laptops with different hardware configurations. Some of them are cheap and available material to the average. The performance is not the best but good enough for every day such as internet activities, office, shipping and so on.
  On the other hand, there are laptops fitted with excellent and powerful equipment. Very often, these notebooks cost twice as low-priced budget.

  Please don t get me wrong, but your portable C is not one that is suitable for use with this powerful software.
  I really put t know that Toshiba can do about it. I guess that you need another graphics driver but support for graphics drivers for laptops is quite limited and I n t think you can do much about it.

  What you can try is to download and install the driver from the manufacturer of the graphics card, but you must do it at your own risk.

  Sorry friend, but I put t have any other advice for you. I think you ve bought bad laptop for such complex graphical operations. 2 GB OF RAM? I put t know.

  Good luck.