Satellite P845t - 10G is not start, make noise by clicking on

Similar Questions

• Satellite C650 - Windows does not start correctly

  I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

  Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

  Hey Buddy,

  You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

  If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Satellite A200-1BJ does not start

  Hello

  My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

  I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

  In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

  No problem with the motherboard or power?

  Thanks for help.

  Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

  Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

  Have you installed any updates or anything that may be responsible for this?

• Satellite Pro L300 - does not start form DVD

  Problem: my Satellite Pro L300 will not start no optical drive (DVD)

  Leisure problem scenario:

  Insert the DVD Toshiba recovery in optical disc drive,
  Restart and during the boot prompt, press F12 and select the optical drive.
  Black screen and the cursor flashes in the upper left corner... after the seconds flew L300 starts to beep loudly. No message on the screen.

  Reports of BIOS version 1.50 while the latest version of the BIOS update on the web is to 1.40...

  Model No.: PSLB1E-02200GG3
  Serial 78685377Q

  I'm doing this because I want to change the OS from Vista to XP.

  Hello

  Stand by. You mean you are using a Toshiba original WXP for Satellite Pro L300 recovery CD/DVD or what?

  Have you tested with any other CD bootable (Linux)?

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Satellite P200-143 does not start

  My Satellite P200-143 does not start. The led lights up and the drive light flashes once then nothing. Holding the buttome 'on' for 10 second light outside.

  I tried to take out the battery for the afternoon, but no effect

  Any suggestions?

  P

  It looks like a dead last.
  The P200 is a new series and I think that the guarantee is valid. Then contact the ASP in your country and ask for help.

  Good luck

• Cannot start/open new Premiere Pro trial - error flag reading - on demand could not start properly _ 0c000001d click OK to close the application

  Dear Forums

  Cannot start/open new Premiere Pro trial - error flag reading - on demand could not start properly _ 0c000001d click OK to close the application

  * Also, I sent my first question 20 minutes ago, not yet approved? Your return indicated "approved" e-mail, * why do I not see my question below still displayed? >

  The members of the Forum Pro first - Hello
  

  
  

  Can someone out there describe in simple basic procedure, how a first time user start using Premiere Pro to the layer just a moving figure video of 5 minutes (a friend aerial artist model with white moving belt in silk on a rest mainly black background layer and a change to a night sky stars panorama I photographed previously?)

  I know that this can easily be done, I have worked in thousands of still images with creative cloud for previous years, but not yet in video in Premiere Pro, so thanks for any advice.

  I enclose the actual video that I use and some samples of the fields of the night sky that I photographed recently for ideas

  I intend to make possibly more elaborate, but for now if anyone of you could just show the basic commands and menus/menus to start to do it simply and quickly. Maybe how to most later convert it tone black & white or sepia. The ideas here is to recreate a sequence modern suite of familiar German Film, wings of desire. Perhaps also a progression in the future to create an effect of the night sky very slowly turning into one layer background behind the main façade first video layer in normal movement. Then maybe a little further - how to adjust the speed of the front to a path layer more slow half price while keeping the substantive motion, the original speed. (* although I realize that I didn't do in 64 fps for the slow movement, I am not concerned about that and would actually welcome a light old world "flip effect framework" as if, in appearance of the films more former silent motion.) * In addition, possibly cutting on 'dead time' a few seconds at the beginning of the video and the 2nd or 3rd time for a few seconds of this unexpected error, when the silk scarf fell on the camera lens (without changing the audio timeline?)

  * (I use Windows 7 on a Toshiba Satellite L555 - [only RAM 4 MB. rates], 2009)

  * Video sample >

  Sarah Seiler Aerial - camera Check-An Unedited manifesto-Dec 16 2015 - YouTube

  * Background samples >

  w-left-west-frames-with-earlier_sept-8_9-2015_1_stitch-mercator-projection-2a-titles-5000-pxl-b_galaxies-at-right-enlarged-5500-pxl http://www.dpreview.com/galleries/1579463287/photos/3374478/Trillium-Lake-Aurora-add-26-ne

  Comet Lovejoy Andromeda brand camera telescope DSC3857-1a-blue-light-increase-layer-Nov 20 2015: Mark Seibold: Galler...

  Larch Mtn Night Sky Sony NEX5R 5 Oct 2015_panorama point 2 b side of cropped rt 3000 pxl: Mark Seibold: galleries: digital...

  Cannon Beach Haystack Rock mamiya 55mm 25 2015_10_stitch_102 26 Aug frames Projection of Mercator Crop dark as he nu Fi...

  Trillium Lake Mount Hood Dark Night Sky Nov 10 2014_stitch a 5000 pxl f to fill 2: Mark Seibold: galleries: Digital P....

  Thanks so much for all the advice of one of you in the Adobe Premiere Pro forums,

  Mark E. Seibold, artist-astronomer, Portland Oregon

  Duplicate thread here: may describe in the simple basic procedure, how a first time user start using Premiere Pro to the layer just a moving figure video of 5 minutes (a model friend artist air with white passage belt mainly black silk )

  Thank you

  Regalo

• Window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application when you try to run Microsoft solve this diagnosis

  Original title: Microsoft Fix it diagnosis

  I ran Microsoft solve this diagnosis. He gave me a window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application.  someone knows how to fix this?

  Thank you

  FOR EXAMPLE

  Hello

  Thanks for the reply. Until I'm your answer I have restored the laptop to the State of origin, with the possibility of restoring elements that had been added by the user. I'm trying to update windows, etc.. If I get errors or problems I will post them here. Thanks for your detailed response.

  Eddie

• Unable to open the program. I get this: lightroom.exe - application error: the application could not start corrrectly (0xc000007b). Click OK to close the application.

  Lightroom.exe - application error: "the application could not start correctly (0xc000007b). Click OK to close the application. »

  I use lightroom 5.

  Please see the troubleshooting link: Solutions for Photoshop Lightroom 0Xc000007b error

  Kind regards

  Mohit

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• Out of nowhere I get this error message "the application could not start properly (0xc000001g). Click OK ot close the application. "I have uninstalled and reinstalled several times.

  I nowhere hand, I get this error message "the application could not start properly (0xc000001g). Click OK ot close the application. "I have uninstalled and reinstalled several times.

  Hi Kingsberry and almathof,

  Please refer to this thread: Re: Premiere Pro 2015 won't open after the recent update

  Thank you

  Regalo

• Satellite A80 121 does not start and make a beep after every 15 seconds

  Hello
  I have a Toshiba Satellite A80-121, and it won't work. Yesterday, worked all very well, but now it does not start.
  When I press the button the button normally has a blue color, then the screen stays black, no image at all, then the fan stops. Then I got a beep every 15 seconds.

  Can someone help me what is wrong?

  Thank you very much for your help

  Hello!

  It sounds like a hardware malfunction...
  If you have installed two RAM sticks try it with a single. Check it!

  I m not a technician to laptop but the problem may be with the motherboard, RAM or CPU, but this is my personal opinion.

  Good bye

• Satellite A105-S4164 - will not start only white screen

  Hi all
  I have a laptop Toshiba Satellite A105-S4164 that will not start.

  I thought that maybe there is a problem with the battery. I took out the battery and then plugged the laptop to the power outlet, makes no difference. The blue lights in the front of the laptop, lights, but I hear no noise from the motherboard or the fan. The laptop is bought in July 2006 and it is out of warranty.
  All I see is a white screen.

  My guess is that the motherboard must be replaced. I have also had kept with Symantic anti-virus and windows updates XP before April 1, 2009.

  Thank you for your comments.

  Seyed

  You can see an image on an external monitor?

  Well, I think that in this case the laptop must be verified by the technician for laptop. You should contact an ASP and ask for help. It would be the best way because the technician can be sure what parts are defective.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

• Satellite Pro A120 - does not start with 4 GB of memory

  Hi all

  I'm new here so please be gentle!

  I have a Satellite Pro A120, model No. PSACOE - 037014EN and you want to increase the memory 512 MB present. I tried 2 different sets of memory 4 GB (2x2gb), but the machine does not start. I tried the different modules together and on their own but still no joy.

  Where I'm going wrong? This model will not take 2 GB memory modules?

  Any advice will be appreciated.

  Best regards

  Dr. Feelgood

  Hello

  Before changing something about your hardware, please make sure that if the computer supports the new pieces of material and, therefore, you can also consult the user manual.

  Anyway, I checked this and this laptop can only be upgraded to 2 GB maximum. This means that you can use the module of 1 GB in each slot and * no * 2 GB in each slot.

  So please bring back the memory modules and buy 2x1GB. It will work.