Satellite P850 - 12Z USB 3.0 Ports right side do not work USB 3.0 speed

Hi all

I bought a portable Satellite P850-12Z with * 4 * USB 3.0 ports. Two ports on the left side and two ports on the right side with sleep functions and fresh.

If I connect an external drive Verbatim USB 3.0 ports on the left side, everything works fine. Transfer rate is about 70-90 MB/s, but if I connect the * same drive * USB ports on the right side I see the pop up message "this device can perform faster if you connect it to a Super Speed USB 3.0 port" and the transfer rate is about 20-30 MB/s. These ports operate as USB 2.0 ports.

I repeat that all the available ports on the laptop are USB 3.0.

Anyone know what is happening with ports USB 3.0 on the right side?

I don't have another USB 3.0 drive to do more tests.

Thank you

Carlos

> I repeat that all the available ports on the laptop are USB 3.0.
You are absolutely right.
I ve checked specification s notebook, and all ports are USB 3.0 ports.

It is not easy to say what the problem is here.
What you can do is to contact the nearest Toshiba service provider and ask for explanations.
They know what the problem is here.

Maybe a few update driver or BIOS update offered in the future will solve this problem. In my opinion, you should continue to use the ports on the left side for data transfer.

Tags: Toshiba

Similar Questions

  • Ports usb 3.0 HP M6-1045dx for right side do not work

    I just changed the motherboard and the hard disk cable in my m6-1045dx and it seems to work without accident for now.

    Now, I can not USB 3.0 ports right to work. I plug anything on them and they don't work at all.

    Here's what I've tried so far:

    I tried to uninstall the drivers and reboot. The laptop and reinstalled the drivers but they did not

    I tried to install a driver wifi intel and who did not

    I tried to install the usb 3.0 intel chipset driver and who did not

    Help, please. I don't know where else to go. Thanks in advance

    Here's what I did.

    I took out the battery.

    I removed the large bottom panel.

    I removed the small panel for the wireless card see if I could see the two screws that connect the usb 3.0 ports and fortunately I did.

    I have check the tightness and the screws were really tight.

    I decided to unscrew the two screws and lifted the backend of the usb 3.0 a little Board. I then sprayed some CRC QD electronic filter on the contact areas.

    I put the two screws back in and tightened their top as much as possible without stripping or breaking the jury.

    I put the panels back on and put the battery back in.

    He started upward and to my surprise, the USB 3.0 ports worked perfectly.

    Until the problem of USB 3.0 port, the motherboard has been changed then maybe contacts to be cleaned. That's my guess.

    Pepe999, thanks for the replies. I appreciate it.

  • Battery discharge even if Satellite P850-12Z is DISABLED

    Hello

    I have a Satellite P850-12Z bought a few months ago (3 or 4).

    I noticed that if the battery is charged to 100% and I turn off the computer for a few days, when I turn on the battery is completely gone or almost gone if it takes me a little longer to restart.

    It seems quite strange to me because I have not seen something similar in any other computer I've had.

    Can someone tell me if this is normal, or what could be the problem?

    Thank you.

    Hello

    It's OK and nothing unusual if some BIOS options are not disabled.
    I guess that the laptop supports features such as Wake Up on Lan and USB Sleep & Charge.
    Both of these features requires power, even if the device is OFF.
    So disable them both (in BIOS) and check if it allows to avoid discharging the battery.

  • Satellite P850-12Z - several keys on the keyboard has stopped working

    Hi all

    It all started a month ago or not.
    My keyboard of laptop (a Toshiba Satellite P850-12Z) began to fail. First was the BACKSPACE key, but subsequently was the numeric keypad 3 key and the Enter key.

    They start working if I hit them several times about 10 seconds or more. You can imagine it's very annoying and frustrating.

    Do I need a new keyboard? For more information, the keyboard fails also under linux.

    In case I need a new keyboard I think that Toshiba was of very poor quality, and I will never buy a Toshiba again.

    My last laptop was from another brand, and the keyboard never lack in 5 years.

    > Do I need a new keyboard?

    Probably yes.
    Connect the external keyboard and check if its not working properly.

    If the external USB keyboard works, so is there a problem with the keyboard controller but with internal keyboard.

  • Replace the screen for one with a higher resolution on Satellite P850-12Z

    Hi all

    I read a lot on the internet about the replacement of the screen on computers laptop toshiba and also I saw a video on [how to replace the screen for a Toshiba Satellite P855 | http://www.youtube.com/watch?v=Ncz3ZaI2I-s].

    Is it possible to replace the screen for a Toshiba Satellite P850 12Z (original: 15.6"@1366x768) to another screen with a higher resolution (say: 15.6"@1920x1080 or 15.6"@1600x900)?

    I'm sure that the graphics card is able to function perfectly with this screen (nVidia GeForce GT630M 2048 MB dedicated) and also I read a lot on laptop screen replacement, and I know that this screen has a connector 40 pin and it is an LED Panel, so I won't have to worry about the ups.

    I found several screens (15.6"@1920x1080) who say they are compatible with Toshiba, but I wan't to make sure a higher resolution Panel replacement is possible.

    Thank you in advance.

    Hello

    Exchange of the display is not supported by Toshiba, so I don't think that someone here can help you with this.
    I assume that Toshiba offers multiple views for this model of laptop. Only seller is different but resolution 1366 x 768 is always the same as on the original laptop specification.

    You can try to contact the nearest Toshiba service provider and ask for help. If someone can help you with that service of Toshiba. They have access to the database of Toshiba and can possibly tell if another view is usable on your machine.

    All this is quite complicated.

  • Satellite P850-12Z: No. Wake up on LAN and no BT after replacing the motherboard

    Hello

    I got a Satellite P850-12Z Code: PSPKBE
    Recently, the support of Toshiba replaced my motherboard

    I thought that WAKE ON LAN is disability, and my Bluetooth does not work.
    I go to Toshiba Bluetooth programs and not work

    Can anyone help me?.
    Thank you

    Hello

    > Recently the support from Toshiba has replaced my motherboard
    In my opinion, you should get in touch with the guys from service again once who replaced / fixed on your laptop.
    The laptop should work properly once the service has replaced a faulty part. If it s not the case, you guys should check once again!

    I put t know what card WLan do you currently use, but AFAIK the original build in WiFi card was Intel and this wireless network adapter supports BT as well.

    So I think you should ask the guys once again unites what s wrong with you

  • Satellite P850-12Z - Webcam does not work

    Hello.

    I use Satellite P850-12Z laptop and I have problem with integrated webcam. Everything was fine, there is no problem with video calls on Skype, but after some time it has just stopped working. I reinstalled the drivers of webcam (product code is PSPKBE but I tried readers for each of them), but nothing happened.

    It cannot be detected by the Skype menu or devices, when I try to launch the Web camera Application it just says: it has been a failure and nothing happens.
    What is happening with this?

    Webcam listed in Device Manager or in the Skype video settings?

  • Satellite P850-12Z is not responsve to power and imput

    Hello!

    I have a Satellite P850-12Z.
    I used it yesterday when the screen went white. The power light was off, even though it was plugged and it could not turn on with the switch. I've left to cool to room temperature (which is fairly low, at about 20 ° C) and tried again, still no response to any input. I removed the battery to try just AC, still nothing, tried the opposite and it's the same result.

    At the time I used it I used it just for word and open some tabs on chrome, none of which should put under duress at the time of the failure that it was warm to the touch, but not hot.

    My first assumption of the cause was the adapter has failed, but because she had a full battery that seemed unlikely.
    Second guess is that power management must be fried.
    Last assumption is that the CPU is fried.

    Anyone would be able to shed some light on this for me, it is possible to repair my laptop, I need it for work and college.

    Oh and its out of warranty of one year.

    Thank you
    Silveress.

    Hello

    Sorry to hear that you have such a problem with your machine. Try to reset your machine please. Disconnect the power and remove the battery. After doing this press the power for about 20 seconds and leave it for a while. Only connect the power supply and try to turn on your machine.

    You know, on this virtual path is not easy to say what the problem is here. In my opinion best optin for you is to contact the nearest Toshiba service provider and ask for help.
    Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  • My MOMENTUM PS/2 port touchpad touchpad does not work correctly.

    I'm using acer aspire laptop v3. My MOMENTUM PS/2 port touchpad touchpad does not work correctly. It stops working sometimes and automatically return to the action after a while. When he stops working, pointer can be moved but just click, left click, scroll etc. do not work... Help, please...

    Hi Anoop,

    This problem may occur because of incompatible or corrupted touchpad drivers. I suggest you to uninstall and reinstall the drivers and see if it helps.

    To uninstall the device drivers, follow these steps:

    a. drag the mouse down to the left and right click on the Start icon.

    b. Select Device Manager.

    c. right-click on the device driver, and then click Uninstall.

    Check out the link to install the drivers:

    http://www.Acer.co.in/AC/en/in/content/drivers

    It will be useful. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

  • My right headphone does not work, but the left works fine

    right earpiece does not work

    Try again with a different pair of headphones. If they don't work, maybe your headphones are broken.

  • right speaker does not work on p70

    I got my lenovo for 3 moths p70a, that I have updated to the lollipop, but after 1 month of use right speaker does not work pls tell my why. and if there is some other updates for this phone.

    Perhaps you've noticed this earlier, but the phone has a single speaker at the bottom, the other is the microphone, if your phone is OK.
    I think that there will be an official update soon, I found a rom called P70-A_S141_160130_L_ROW on a Russian forum. I installed it with Flashtool and looks like a minor Bug release. For example, it proposes to save videos in 1080 p (empty limited Lollipop p 729 previous updates) again.

  • Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

    Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
    Keyboard is fine.  Is this a compatibility issue?

    ---------------

  • I have an optical mouse wireless portable 3000, the left & right buttons do not work, but the Center wheel works fine. Can someone please?

    I have an optical mouse wireless portable 3000, the left & right buttons do not work, but the Center wheel works fine. Can someone please?

    Hello

     

    You did changes to the computer before the show?

     

    Method 1: Check the mouse on another computer and see if the clicks.

     

    Method 2: See the following article:

     

    Troubleshoot the incidents of the response to the mouse or wireless keyboard:

    http://support.Microsoft.com/kb/838398

  • Why ctrl + right click does not work with babylon dictionary windows 7

    Why ctrl + right click does not work with babylon 8 dictionary. I use a 64-bit windows 7.

    Hello

     
     
    1. facing this problem only with application of Babylon?
    2. it worked earlier?
     
    If you encounter this problem only with Babylon, I suggest you to post your request in the forum of the community of Babylon to better support on this issue.
    http://support.Babylon.com/
  • 3 USB ports on 4 does not work on Satellite A660-12th

    Hi, I have a problem with my laptop french: 3 or 4 of my usb ports does not work.

    My laptop is a:
    Satellite A660-12th
    Reference: PSAW3E-02700GFR

    I almost tried everything:
    -reinstall all drivers
    -Uninstalling the root USB controller and restart the computer
    -Finally to format my laptop and clean reinstall.

    -3 ports still does not work and I do not know how to solve them.

    I bought an of 2 TB external HARD drive and its driver is installed but not recognized by the last working USB port. I really need to fix the other 3. Could you help me?

    Wait a moment have you tested all 3 USB ports only for external 2 TB HDD?
    How USB ports do not work if you connect a USB mouse or a USB flash memory stick?

    Page plug Toshiba says that this laptop supports 3 2.0 USB ports: 1 left, 2 right
    The one on the left is a port eSATA/USB 2.0 supporting sleep and fresh.

Maybe you are looking for

  • Sierra of iMac (late 2009)

    I started to download the new operating system last night and it is still downloading (3.54 GB of 4.77 GB).  Whats up with the length of time to download?

  • How to frame a sketch I place in iPhoto?

    How to frame a sketch that I placed in iPhoto? My operating system is OSX 10.9.5.   iPhoto 9.5.1 (902.17)

  • Get the maximum index of a vector of growth

    Hello I'm having a very strange problem. I simulate data with an sine function in a while loop and I keep the values< 0.7="" into="" a="" vector.="" when="" the="" sinus="" values="" are="" over="" 0.7,="" i="" remove="" the="" vector.=""> I would li

  • WMS idle won't let not computer off

    I am running XP pro SP3. When I try to stop I get the WMS idle message is still running and I have to click end now for computer to finally stop. That is what it is?

  • RVL200 displays "system busy! Please wait... ' when loging in to the configuration page.

    Had an IPSec tunnel with a RVL200 at each end for well over a year.  Lately the problems started with one of them.  Attempts to open a session configuration pages (locally or remotely) or a VPN translates the message "system busy! Please wait a minut