Satellite P850 - Windows 8 will not restart properly

Similar Questions

• Windows 7 will not restart after an installed cleaning

  After a clean install of windows 7, it will not restart when you click on restart. It just goes to the screen to the motherboard. If you go into the bios, windows will restart by clicking on the disk that contains windows 7. How to make computer restarts correctly?

  It is probably an incorrect configuration in the BIOS boot priority setting.

  When you install the operating system, you usually change the priority settings of your device to start to get my media you use (USB or optical drive). Therefore, it is possible that it was for the setting even after installation, so he's trying to boot from the recovery media instead of the operating system on the hard drive.

  The BIOS boot priority settings vary depending on the manufacturer of the computer. Therefore, for the change in the value of such assistance, we suggest that you contact the manufacturer of your computer.

• Satellite C850 - Windows 8 will not be updated

  Hi all

  Recently bought a Toshiba C850 laptop for my wife.
  Working in I.T the first thing I did was run windows update, it invites updates are available and starts to download.

  However, it is just eternally on 0%, I checked the download folder in the distribution of software and it fills up with updates, but the windows update screen never changes.
  I made some updates on the another victory of 8 machines on the same network so I know this isn't a problem with the internet.
  Have reset the pc by using the reset my pc to function within windows 8, tried again and still the same.
  A ran files hotfix microsoft... always the same support windows update.

  Even if I chose an update to download and install only for sticks to 0%.
  Deleted the contents of the folder dist\download software. picked up the update, this issue starts to fill up, but even after leaving, for 24 hours, its still on 0%

  Have reset all components of windows update, checked nothing uses the same port as the windows update server and still no luck.

  I noticed one thing, it is that if I try and stop the windows update service, and then the laptop everything grinds to a halt, it will begin to stop, however, then hang on the screen to stop.

  The only one, it was so he could stop completely must end the svchost.exe that's more critical system process related to the specific process that is running.

  Any ideas at all as I find myself with this laptop that will not update despite the set back to the factory settings.
  Concerning
  Sam

  Svchost.exe is a Windows internal process that hosts several Windows services (Internet Protocol is a part of the possible services)
  Because svchost.exe is used as a common system process, some malware often uses a "svchost.exe" process name to disguise herself.

  So maybe the laptop is affected by malware and therefore the update does not work correctly.
  Maybe you should try to repair or to reset the system of Windows 8?

  * Check that Windows 8 recovery & repair info: *.
  * http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm *.

• 15 HP, pc laptop 15-g019wm: windows 8 will not load properly after reinstallation of windos 8

  Hello... my laptop HP 15 / 15-g019wm / product # F9H60UA #ABA has been very slow. I went the parameter/recovery/delete everything and reinstall windows. I worked a lot better after the relocation. However, after power off and power on... I get the windows start-up screen... I click it and it turns into a green background screen (mouse can move) and nothing else. Any help would be appreciated

  Restart the PC when it comes to what the splash screen let him stay there untouched for an hour, see if things will sort the.

• The / r option under stop will stop windows and it will not restart when chkdsk is also in the same batch file

  This batch will be the file windows stop and not restart it with the command chkdsk present.

  OFF @ECHO
  REM FIXDISK. BAT
  CHKNTFS T:1
  C:
  ECHO Y | CHKDSK C: /F > ZERO
  CLS
  ECHO RESTARTING SYSTEM

  SHUTDOWN /r /t 0

  Hello V Trammell,

  Where did you got the script? Do you have it created yourself?

  If you need help with the script, I suggest you post in the forum TechNet in the category ' Forum official Scripting Guy.
  Click here for a link to transfer your question.

  Sincerely,

  Marilyn

• Pavillion23: Windows 7 will not be updated. I get error code 800706F7.

  Windows 7 will not be updated. I get error code 800706F7. I removed the update painful KB304394, which of course still blocking updates, earlier. Since then, I find in the history of the update that almost most of the windows update attempt failed.  (A couple for Windows Defender succeeded). Now, when I try to install an update manually, I get the 800706F error code.

  This is what Windows Update tells me on the article that I tried to install:

  Update for Internet Explorer 11 for Windows 7 for x 64-based systems (KB3025390)

  Download size: 190 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Install this update to resolve problems in Windows. For a complete list of issues included in this update, see the Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.

  More information:
  http://support.Microsoft.com/kb/3025390

  Help and Support:
  http://support.Microsoft.com

  Yes, I have same problem of yours, I've finally updated all those win updates, now that I started some bloggers advice what to do to solve these problems. I actually had a problem with a crash suddenly and blackout of screen and other unusual tracks on this desk, until the February MS cannot install updates. what I've done, I've tried the [FSC.exe] System File Checker, see him through YouTube "how to use FSC,"... Solved problems of 100%, but it depends on the number of files that can not be repaired, my results are minor just repair corrupt files... Try it...

• Windows Update will not update. Get codes 641, 80070641 and 8004FF01. Fix on Microsoft won't fix it. He said that the Windows Installer is not installed correctly. How can I solve this problem?

  Since May 8, 2012, I have not been able to get updates of thje automatically updated.  It worked fine before the 8th.  I open Windows update and click the update and I have 3 different errors.  The error codes are 641, 80070641 and 804FF01.  I downloaded several times the Microsoft Fix It and it fixed 1 thing ad so I ran it again and he said "No problems need Attention."  But he is not always up to date.  I have 18 important updates and they all failed.  Difficulty he installation of Microsoft Center, I had "an unexpected error has occurred.  Setup cannot continue.  Close, and then try again.  Error: installation of window Service could not be accessed.  This can happen if Windows install is not properly installed.  Contact your support staff. »

  What can I do to fix this problem and make the update of Windows to operate?

  Gwen,

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-will-not-work-getting-errors-641/dfd4c17e-72c6-47F5-b3fa-6ab64803bbc0>

  UTC/GMT is 23:02 Sunday, July 22, 2012

• Windows Update will not download anything, the code error code 80070641 and 641

  When I try to download things it says Update window won't I don't really know what to do and my windows update will not install the things he asked me of! Help, please

  Hello!

  It's what has helped us to
  This error code occurs when the Windows Installer is damaged
  Try this:

  Open Notepad.

  Copy the following into Notepad and save it as fixme.reg

     push all the files and then save it to your desktop.

  Windows Registry Editor Version 5.00

   

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msiserver]

  'DisplayName"="@%SystemRoot%\\system32\\msimsg.dll,-27 '.

  "ImagePath" = hex (2): 25, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 72, 00, 6f, 00, 6f, 00,------.

  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 6 D,------.

  00,73,00,69,00,65,00,78,00,65,00,63,00,20,00, 2f, 56, 00, 00, 00, 00

  'Description"="@%SystemRoot%\\system32\\msimsg.dll,-32 '.

  "LocalSystem ObjectName"=""

  "ErrorControl" = DWORD: 00000001

  "Start" = dword:00000003

  'Type' = dword:00000010

  "DependOnService" = hex (7): 72, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00

  "ServiceSidType" = DWORD: 00000001

  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 72, 00, 65, 00, 61, 00,------.

  74,00,65,00,50,00,61,00,67,00,65,00,66,00,69,00, 6 C, 00, 65, 00, 50, 00, 72, 00, 69,--------.

  00,76,00,69,00 6 c 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 c, 00, 6f 00, 63, 00,------.

  6B, 00, 4 d, 00, 65, 00, 6 d, 00, 6f, 00, 72, 00, 79, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00,------.

  73,00,65,00,42,00,61,00,73,00,65,00,50,00,72,00,69,00, 6f, 00, 72, 00, 69, 00, 74,------.

  00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00,------.

  65,00,43,00,72,00,65,00,61,00,74,00,65,00,50,00,65,00,72,00, 6 d, 00, 61, 00, 6e,------.

  00,65,00, 6F, 00, 74, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 C, 00, 65, 00, 67, 00, 65, 00,------.

  00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,72,00,69,00,76,00,69,------.

  00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 53, 00, 65, 00, 63, 00, 75, 00, 72, 00,------.

  69,00,74,00,79,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00,------.

  00,53,00,65,00,43,00,68,00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 00, 69, 74, 00,------.

  66,00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53,------.

  00,65,00,50,00,72,00, 6f, 66, 00, 00, 69, 00, 6 c, 00, 65, 00, 53, 69, 00, 00, 6F, 00, 67, 00,------.

  6 c, 00, 65, 00, 50, 00, 72, 00, 6f, 00, 63, 00, 65, 00, 73, 00, 73, 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

  72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,------.

  47.00, 6 c, 00, 6f, 00, 62, 00, 61, 00, 6 c, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65,.

  00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00, 6F, 00, 50, 00,------.

  72,00,69,00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 00, 50, 72,------.

  00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 52, 00, 65, 00,------.

  73,00,74,00, 6f, 00, 72, 00, 65, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00, 73, 00, 65, 00,------.

  51,00,75,00, 6f, 00, 74, 00, 61, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,53,00,68,00,75,00,74,00,64,00, 6f, 77, 00, 00, 6F, 00,------.

  50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 54,------.

  00,61,00, 6B, 00, 65, 00, 4f, 77, 00, 00, 6F, 00, 65, 72, 00, 00, 73, 00, 68, 00, 00, 69, 70, 00,------.

  50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 C,

  00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00, 50, 00, 72, 00, 69, 00,------.

  76,00,69,00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 42, 00, 61, 00, 63, 00, 6 b------.

  00,75,00,70,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00,------.

  00.00

  "FailureActions" = hex: 84, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

  00,01,00,00,00, c0, d4, 01, 00, 01, 00, 00, 00, e0, 93, 04, 00, 00, 00, 00, 00, 00, 00, 00, 00

  Go to your desktop and double-click the file name fixme.reg

  or

  Click Start.

  Type regedit in the search field and press to enter.

  On the registry change windows click on file and select import.

  Navigate to the location where the fixme.reg file and select the file.

  Click ok on the windows screen once the registry is merged successfully.

  Restart computer and check if updates installs.

  I also had iolo which weaken my Windows Installer and I had to uninstall it.

  Hope this helps

  Microsoft KB article:

  http://support.Microsoft.com/kb/2642495

  Please come back if you need more help

  Thank you

  Makoi

• Windows Live will not disconnect

  Hi, had a few bad days with my account @ [email protected]. I had questionable e-mails being sent to everyone in my Inbox, on various recommendations have changed my password, deleted all sent, deleted and Junk emails, emptied all the cookies and ran Malware Bytes to try to identify the issue.

  I saw no additional e-mails (although they have happened at around 02:00 so will check tomorrow) BUT I am now having problems logging on hotmail, when I try, I get an error message saying that Windows Live is not disconnected properly.

  Any ideas how to make sure that its newspapers on correctly?

  Thank you

  Eve

  Hi EveJessett,

  The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.

  Windows Live Solution Center - Hotmail Portal
  
  

• My Windows Defender will not remain, it turns off

  original title: My Windows Defender

  My Windows Defender will not stay on, even though I have a scan scheduled @ 02:00 every day. I do not understand why the Defender stops, and I get a warning telling me it's off. It analyzes every day @ 02:00, and I manually do a quick scan when I see the warning icon. Help!
  Thank you for your help.

  Bonnie Mayer

  Copy davidhk129 answer to the question of Windows Defender won't start do not:

  Here's a direct copy...

  If you have
  one of the following AV, antivirus, programs installed, it will stop your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok.
  It's normal.
  List of AVs which will stop Windows Defender:

  Norton
  McAfee
  AVG
  Microsoft Security
  Essentials

  If you don't have AV programs above, here's how to restart Windows Defender:

  Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows
  Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• Windows 7 will not recognize the dvd drive

  Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

  It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

  It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

  What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

  Hello

  If the drive is viable:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951

  
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 will not synchronize with internet time server

  Windows 7 will not synchronize with internet time server

  Had to go to services.msc and allow the windows time server to access the computer. Go to run and type services.msc hit enter, do scroll down to windows time server and more he probably stopped, just restart. Thanks to you all

• Why the "games for Windows Marketplace" will not be launched?

  Why the "games for Windows Marketplace" will not be launched? I tried to launch the start screen appears and when you look at the Task Manager, GFWLive.exe and GFWClient.exe show, but after a few seconds the splash screen and the GFW deals disappear and never loads the user interface. I tried to reinstall the client and the .NET Framework, but which has no effect. I also tried a couple of registry cleaners, but still no change.

  The content of the log in the AppData directory file is as follows:

  2011-07-28 T 05: 24:03 Info start starting up.
  2011-07-28 T 05: 24:03 Info start 64-bit Microsoft Windows NT Service Pack 1 6.1.7601
  2011-07-28 T 05: 24:03 Info start-up operation system INTERFACE language is en-US.
  2011-07-28 T 05: 24:03 account Info startup user INTERFACE language is en-US.
  2011-07-28 T 05: 24:03 Info start GFWLClient.exe version 3.5.0050.0.
  2011-07-28 T 05: 24:03 Info start XLiveServices.dll version 3.5.0050.0.
  2011-07-28 T 05: 24:03 public XLiveServices.dll information starting build type.
  2011-07-28 T 05: 24:03 Info start xlive.dll version 3.5.0088.0 (WGX_XLIVE_V3.05_RTM (panblder). 110409-1835).
  2011-07-28 T 05: 24:03 Info start XLiveInstall.dll version 3.2.0006.0 (WGX_XLIVE_v3.02_RTM.100427 - 1415).
  2011-07-28 T 05: 24:03 Info start downloads directory is C:\Users\User1\AppData\Local\Microsoft\GFWLive\Downloads.
  2011-07-28 T 05: 24:03 Info start Addon installation directory is C:\Users\User1\AppData\Local\Microsoft\XLive\DLC.
  2011-07-28 T 05: 24:03 Info start demos installation directory is M:\Users\User1\Documents\Games for Windows - LIVE Demos.
  2011-07-28 T 05: 24:03 Info full boot the game installation directory is M:\Games.
  2011-07-28 T 05: 24:03 Info video boot installation directory is M:\Users\User1\Media\Videos\Games for Windows - LIVE videos.
  2011-07-28 T 05: 24:03 Info start time zone is Eastern Standard Time.
  2011-07-28 T 05: 24:03 the startup command line option download Info offer 0x4D530935E0000001 after registration.
  2011-07-28 T 05: 24:03 sqm sqm OSLocale 1033 value Info.
  2011-07-28 T 05: 24:03 Info M² M² LaunchedByInGame the value 0.
  2011-07-28 T 05: 24:07 to msidcrl40.dll version 7.250.4225.0 startup information.
  2011-07-28 T 05: error starting 24:07 could not start. {Exception: {Type: System.EntryPointNotFoundException} {Message: could not find an entry point named 'InitializeEx' in DLL "msidcrl40.dll".}} {Source: XLiveServices} {Stack trace: at Microsoft.GamesForWindows.XLiveServices.LiveConnection.get_Instance () at Microsoft.GamesForWindows.LiveClient.App.TryInitLiveConnection (Boolean & try again) to Microsoft.GamesForWindows.LiveClient.App.OnStartup (StartupEventArgs e)} {{Target Site: Microsoft.GamesForWindows.XLiveServices.LiveConnection get_Instance()}}
  2011-07-28 T 05: 24:46 Info start starting up.
  2011-07-28 T 05: 24:46 Info start 64-bit Microsoft Windows NT Service Pack 1 6.1.7601
  2011-07-28 T 05: 24:46 Info start-up operation system INTERFACE language is en-US.
  2011-07-28 T 05: 24:46 account Info startup user INTERFACE language is en-US.
  2011-07-28 T 05: 24:46 Info start GFWLClient.exe version 3.5.0050.0.
  2011-07-28 T 05: 24:46 Info start XLiveServices.dll version 3.5.0050.0.
  2011-07-28 T 05: 24:46 public XLiveServices.dll information starting build type.
  2011-07-28 T 05: 24:46 Info start xlive.dll version 3.5.0088.0 (WGX_XLIVE_V3.05_RTM (panblder). 110409-1835).
  2011-07-28 T 05: 24:46 Info start XLiveInstall.dll version 3.2.0006.0 (WGX_XLIVE_v3.02_RTM.100427 - 1415).
  2011-07-28 T 05: 24:46 Info start downloads directory is C:\Users\User1\AppData\Local\Microsoft\GFWLive\Downloads.
  2011-07-28 T 05: 24:46 Info start Addon installation directory is C:\Users\User1\AppData\Local\Microsoft\XLive\DLC.
  2011-07-28 T 05: 24:46 Info start demos installation directory is M:\Users\User1\Documents\Games for Windows - LIVE Demos.
  2011-07-28 T 05: 24:46 Info full boot the game installation directory is M:\Games.
  2011-07-28 T 05: 24:46 Info video boot installation directory is M:\Users\User1\Media\Videos\Games for Windows - LIVE videos.
  2011-07-28 T 05: 24:46 Info start time zone is Eastern Standard Time.
  2011-07-28 T 05: 24:46 the startup command line option download Info offer 0x4D530935E0000001 after registration.
  2011-07-28 T 05: 24:46 sqm sqm OSLocale 1033 value Info.
  2011-07-28 T 05: 24:46 Info M² M² LaunchedByInGame the value 0.
  2011-07-28 T 05: 24:49 to msidcrl40.dll version 7.250.4225.0 startup information.
  2011-07-28 T 05: error starting 24:49 could not start. {Exception: {Type: System.EntryPointNotFoundException} {Message: could not find an entry point named 'InitializeEx' in DLL "msidcrl40.dll".}} {Source: XLiveServices} {Stack trace: at Microsoft.GamesForWindows.XLiveServices.LiveConnection.get_Instance () at Microsoft.GamesForWindows.LiveClient.App.TryInitLiveConnection (Boolean & try again) to Microsoft.GamesForWindows.LiveClient.App.OnStartup (StartupEventArgs e)} {{Target Site: Microsoft.GamesForWindows.XLiveServices.LiveConnection get_Instance()}}

  I'm sure that the last entry in the log has something to do with my problem.

  RESOLVED: "gamename has stopped working", games for Windows Live problem *.

  OK, finally solved.

  I uninstalled what is called "Windows Live ID Sign - in Assistant", as well as the usual games of .NET, MS for Windows - LIVE and games for Windows Marketplace Client, then ran a registry cleaner (I used CCleaner, which is free) and restarted.

  I then reinstalled GWL from MS. site

  I hope this helps someone else.

• Windows 7 will not detect THE routers wireless, including mine.

  Windows 7 will not detect THE routers wireless, including mine. I inserted the cd of restoration of the system, and after that he picked up no internet. No, even if I connect it with the wire! Help!

  Hello

  Thank you for contacting Microsoft Community.
  Is properly installed wireless adapter driver?
  Go to start-> type devmgmt.msc-> press on enter. In the Device Manager window, expand network adapters. You should be able to see a list of network adapter as Ethernet, Bluetooth, etc. Make sure that you can find the adapter wireless from the list. If so, double-click it. Properties windows will be open. On the general tab, under device status, if it shows that the device is not functioning properly, please remove the case, locate the wireless network card and make sure the connections of antennas are coneected correctly. If even a connection is not properly connected or damaged, you cannot connect to any WiFi network.
  Response if the issue is not resolved.

• internal card reader must be disabled and then enabled in before Device Manager it will not work properly.

  Whenever I start my computer, my internal card reader must be disabled and then enabled in before Device Manager it will not work properly. I put an SD card in there and auto does not work. I check my computer and it shows that it is there, but when I double click on it to open it I get a message saying: Please insert the SD card. When I go to Device Manager and disable and enable fine orks. I tried different cards, but it makes no difference.
  I installed a different card reader, but another did the same thing. This leads me to think it's a matter of Windows.
  I tried to do a repair install, but it ends and said that the upgrade has failed?
  Anyone have any ideas on how to solve this problem.

  I am running Windows 7 Pro 64-bit. It is a Renesas controller and I use the 2.1.28.0 with firmware driver 4015.

  I'm not sure but I may have found the problem. I see where a guy here was having a similar problem and it was caused by Acronis. I recently installed Acronis 2012. I have been lucky to uninstall, but I will update this post when I do.  He was also running windows 7-64 bit on a motherboard ASUS!

  Acronis was the problem.  I uninstalled Acronis and now my card reader works as it should.  Strange!