Satellite PM30: Not able to write CD

Similar Questions

• Satellite A200: Not able to write DVD using Win XP

  Hello

  I have an A200 - 1 MB (PSAEO) that came with Vista home premium installed. After this downgrade to XP Professional, I am not able to write something on the DVD.

  Help, please. Model # for the DVD drive is TS-L632D.

  Help, please.

  Thank you

  James

  Hello

  I assume that you have installed all the drivers for the Toshiba driver page. You also update the BIOS to the XP version?
  You should do this if you have changed the operating system and if you use XP instead of Vista.

  May I ask how you try to burn data to a DVD disc?
  Are you using a 3rd party burning software?

  I use Nero and I m very pleased it burns different types of CDs and DVDs.

  Feedback would be appreciated.

• Not able to write CD or DVD on Tecra A4

  Since the last time I posted my problem of not being able to write CDs or DVDs using TECRA A4 with Mat * 830s DVD burner, I tried all the methods that have been suggested, but without success. I tried to update the firmware to version 2, but I wasn't able to update the firmware. I get the target drive not connected message.

  Hmm, so it's the pathetic situation, I am not able to write even a CD single in 2 years I bought the Toshiba Tecra A4. Whenever I put a CD in it says "D: / incorrect function." Is there a solution to this? I expect a last hope to make it work.

  At the end of my patience, if I can't write a single CD even after 2 years.

  Hello

  > but I wasn't able to update the firmware. I get the target drive not connected message.
  This message appears because you have used a wrong firmware and is not compatible!

  However, I have read you first assignment and all advice offered were ok.
  But have you checked that?

  Try going into control panel-> system-> hardware-> Device Manager and then under dvd/cd devices select the drive and right click and uninstall and then reboot and see if it helps.

  Please check if deleting UpperFilters and LowerFilters in the registry helps:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16319&MessageID=59664

• Not able to write files to CD or DVD

  I'm not able to write files to CD or DVD. When I go to DVD - RAM (d :)) properties, I see only the following titles: general, AutoPlay, material and sharing.) I used to see a record position, but now he isn't. How do I restore to open and activate the recording function? I use Windows XP Home Edition with Service Pack 3. Drive: HL-DT-ST DVDRAM GMA - 4082N. Please advice. Thank you.

  Hi mark,

  · You receive an error message or error code when you try to burn a CD/DVD?

  · Do you remember recent changes made to your computer before the show?

  I suggest you to run the troubleshooter from the link below: your CD or DVD cannot read or write media:http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

  You can also check the links below: CD - R or CD - RW drive is not recognized as a recordable device:http://support.microsoft.com/kb/316529

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD:http://support.microsoft.com/kb/321641/

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite C660 - not able to install the driver for chipset WXP

  Come on!

  I installed WIN XP on my Toshiba Satellite C660 laptop and downloaded the drivers for windows XP, but I'm not able to install the chipset and display drivers.

  It says "this computer does not meet the minimum requirment for the installation of this software.
  Setup will now close '.

  Can you help me, please?

  Hello

  What C660 (C660-xxx) do you have?
  Have you installed Windows XP Home Integrated SP2 or SP3?

• Not able to write DVD after reformatting on Equium A60

  Help, please
  I had to reformat my drive hard once the system has been corrupted, now, the drive is not recognized as dvd player and do not write DVD.
  What should I do
  Thank you

  Hello

  I found a DVD-Ram driver Toshiba driver Web site.
  Please download and install this driver.
  Hope that this procedure will solve your drive problem.

• CD/dvd reads but not able to write. says 'hardware error 9216.

  When I got this laptop it reads and writes audio and dvd movies fine but after about two years it stop working. whenever I try to write it not finish writing and guest says 'hardware error 9216. has concluded that it might be because I got more than burning software then maybe they could have a conflict with each other, but I could find something on how to resolve the issue so that why I'll try here.

  It could be the problem with the software if have several software to burn and write as you say. You can uninstall one by one and after uninstalling restart your PC to see what problem a single cause. To better test, it is better to restart after every uninstallation. If you see system information, you can find the details in the conflict, but it is a little technical.

  Restore your system before this problem to occur.

  You can try to run this command at the command prompt:

  sfc/scannow

  Make sure that your system is updated and the latest service pack installed.

  Another thing is that it might be due to malicious software, and in this case, you could run full system scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• I have PC toshiba laptop, my cd/dvd. writer does not read the CD software and not able to write the media__

  itshow msg

  Insert the disc pls

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  ===============================================================

  Check with Toshiba support, their drivers online (update or reinstall) and their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• USB disabled not able to write and read access but user authorized to datacard possible

  Dear all,

  I need usb disabled unable to access both read & write. But able to access a Data card and USB mouse.  This is possible thanks to a block log. Please post your suggestion.

  Hello

  1. What is the exact problem you are facing with USB?

  2. you receive an error message?

  3. have you made changes on the computer before this problem?

  Please provide us with more information to help you further.

• Not able to write correctly in the Arabic language in artificial intelligence

  Hello

  I'm unable to write correctly in In Design and Illustrator of the Arabic language

  Hi Ali,

  If you have installed the Arabic version of HAVE and ID, please see the following links for more information:

  Type of Arabic and Hebrew in Illustrator

  Features of Arabic and Hebrew in InDesign

  If this is not the case please check the previous post and install the programs correctly.

  Thank you

  OM

• "Not able to write to the configuration file" when config editor in the admin tab

  Hi guys,.
  
  I have install OBIEE 10.3.3.4 on a GNU / linux RH (with OS user obiee) and Oracle Application Server 10.1.3.1 on the same box (with OS user oraias).
  
  When I want to change some settings in the admin tab of BI publisher (administrator/administrator under the name of login/pass) and click "apply."
  I get the error "could not write to the configuration file. Once I changed the configuration to 777 properties, the error is still there. And I also try to change the SECURITY MODEL to the MEO, but still no use.
  
  I did a test, for example, when I change something in the admin - JDBC - Oracle BIEE and apply then I got the error. If I update xmlp/DataSource/datasources.xml manually, the change can be seen after that I opened the admin of page - JDBC - Oracle BIEE. That means I have find the right file and the file access properties is ok.
  
  Other parameters such as the Scheduler Configuration, I had the same error when apply. But the "Test connection" and "Installation diagram" function.
  
  Can someone give me some advice on this? Thank you
  
  Scott
  
  Published by: Typhoon on March 20, 2009 12:59 AM

  In what way is your xmlp? You are absolutely sure that the user of the OAS (oraias) can write to this file? If you have used another user for OBIEE then your will need to change the owner of the file or put them in the same group, and change the file permissions.

• Satellite A30 - not able to install Power Saver on Windows XP Professional

  Hello, I need help, I had to install win xp prof on my a30, but I can not install the intelligence tool that I downloaded from this page. the tool tells me "You can not install this version of Power Saver on your system", but it has the latest version for windows xp on this page of toshiba. is the family sleep only for windows xp tool?

  Hello

  No, the saver powers should also works and run with Win XP Pro.
  There is no difference. All the tools that work on XP Home are also compatible with Win XP Pro.

  Did you receive the tools and Utilities CD? You can use this version to

• not able to write the data through data acquisition

  Hello

  In fact, I need to send a code word (text file) from the program matlab through my data acquisition (OR-USB-6215). my program (transmitter.vi [case structure: page2]) attached below has a problem to do the task. whenever I run the program it gives me an error like

  Error-200479 occurred at DAQmx start Task.vi:2

  Possible reasons:

  Measurements: Specified Operation cannot be performed during execution of the task.

  Task name: _unnamedTask<84>

  At the moment I don't see output in my oscilloscope. But, if I highlight my performance I observe my samples on the oscilloscope with the following error message

  200288 error has occurred in the DAQmx write (analog 1-d 1Chan NSamp DBL) .vi:3
  Possible reasons:

  Measurements: Attempted to write a sample beyond the final sample generated. The build is stopped, so the sample specified by the combination of the position and the offset is never available.

  Hi Raja,

  What I did is I moved the 'write DAQmx' outside the while loop. That made the VI in this case is read the file and passing it to a table, and then this table is formatted a waveform to be written to the data acquisition device.

  With respect to the way in which the data is read, I don't change anything, it was based on your original code. A good way to know if you write the correct data is to check the chart view in VI.

  So the question is, is the graphic display showing the good waveform?

  Best regards

  Faris

• Satellite Pro M70-113: not possible to write on CD - R and DVD-R

  Hello

  I have a Toshiba satellite pro m70-113 laptop.
  Playback problems:
  I'm unable to read cd - r. It's really strange that a few days earlier these CD - R have been reading very well on my drive.
  and when I click on the cd drive in my computer, an error dialog box shows and says f: is not accessible, incorrect function. Here's a screenshot of the error... :
  http://img64.imageshack.us/img64/9574/1bp3.jpg

  And when I try to read my DVD-R, a few times they read very well but sometimes it does not read and the drive LED is lit when it does not read the dvd - r.
  When it reads the DVD-R, the following error message comes: screenshot here: http://img172.imageshack.us/img172/9674/2bc0.jpg

  Write problems:
  After getting reading problems, I tried to test my drive writable.
  And I found that I'm unable to write on cd - r. I used alcohol and Nero once but without success.

  Although the same content when it is burned to cd - rw, it is a success.
  I am able to burn successfully on a support DVD + RW 4 x with data amounting to close to 4.34 GB for DVD5...
  When I insert a DVD - R Virgin car doesn t detects it as a blank media and the keps LED on lighting constantly and if nero State doesn't detect my DVD even! I'm not able to write on my DVD-R media...

  In short: write to RWs is possible for both cd - r and dvd + RW not possible of writing on CD - R and DVD-R.

  Please help me.
  It is only 7 months since I bought this laptop and believe that there may be no other person on this planet who looks after the training better than me!
  Really, I have not much used this drive and never scratched/gradient/local support, only the Supermedium media inserted.

  Thank you

  Hello

  Well, based on your description it sounds like the drive cannot calibrate the lens and, therefore, it of not possible to read or write to these media.
  Usual it of not possible to fix this and the replacement drive is necessary.

  You can also consult the user manual. You will find a list with all supported and compatible media.

  I also found this topic in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13170&MessageID=48243

• Satellite M30X-165: Mat * a UJ - 831 S is not read and write any DVD

  Hello

  the next problem is sticky on the laptop Satellite M30X 165 with the burner Mat * a UJ - 831 S: it can read and write CDs, but is not able to write them to DVD or even read some of the ones I've burned and also read in the same drive. Even at the start of the DVD, it does not start from the recovery DVD, the player starts and slows down very quickly.
  Without doubt, it must be put at the service of repair or someone has other suggestions?

  Could you please tell me how long the repair takes (I know what it takes to install the desktop temporarily used).

  Thank you

  Post edited by: DerSeher
  Using burning software, it detects the DVD, but invite you to an "error of calibration power (037303).

  Hello

  If you cannot use recovery media, I guess that the drive is defective and must be replaced.