Satellite Pro 2100: DVD - ROM not detected - need drivers

Similar Questions

• For Satellite Pro 2100 DVD burner?

  I have a Satellite Pro 2100 which has a CD-RW/DVD-ROM drive and I would like to upgrade to a DVD burner but don't want an external. Could someone tell me which drive is compatible with the model number and where I can get hold of one? Can I get a Toshiba direct? Nowhere would really suit me I need to get one, but just don't know what I can and can not use! Thank you.

  Hi Jamie

  Unfortunately, he was unable for me to find this DVD burner, but if you want to update or change some parts of your laptop the best way is to ask ASP for compatible devices and supported.

  Good bye

• Satellite Pro A210 DVD Drive not working no-error code 39

  Hi all

  My Satellite Pro A210 dvd player does not load.
  When I looked inside, he showed an error code 39.
  I tried uninstalling and reinstalling but it still doesn't work.

  Any ideas?

  Hello

  To my knowledge, the 39 error message appears if the CD/DVD drive is not visible in my computer.
  You can try this workaround:
  Go to Device Manager and remove the drive CD/DVD from the list of devices.
  Then go to the registry (regedit) and remove upper and lower key filters:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the device and test again
  I think this should help!

• Satellite pro 2100: System can not recognize battery

  Hello!

  I have a problem with my Toshiba Satellite pro 2100, after the upgrade to Windows XP Pro with Service pack 2, my computer is anable to recognize the battery. I also reinstalled Toshiba powersaver drivers on the CD and nothing is better.

  I can work on my computer normally, but it's awful when it sudddenly shot without saving anything when the battery is completed.

  What can I do? Thank you all.

  Blaz

  Hello

  Can you please check under Control Panel Power Options Properties power meter is an indication of the capacity of the battery.

  Also check the settings in Toshiba Power Saver. Under energy-saving Modes, it is running on batteries go Normal, and then click details. Check all the settings in power saving Mode.

  If your problem persists, please write again.

• Satellite Pro 2100: CD-ROM/DVD-ROM is missing - error code 39

  Hi all

  After an unsuccessful attempt to install a key USB TV, my DVD/CDRW drive has disappeared. It still works, I can hear it working, but Windows XP does not know more that the computer has this feature. It also is not upward under 'my computer' more. System Device Manager also tells me there is a problem (code 39), and displays an exclamation point in front of Mat * un UJDA740. What can I do? How can I recover my CD-ROM/DVD-Rom drive?

  Thank you
  SHL

  Hello

  This issue has been described a lot of time in this forum, and the solution has been found.

  Please check this forum announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

  I guess that the solution to this Microsoft Web site will help you:
  CD-ROM drive or DVD-ROM seems to be missing
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553

  or

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;314060

  I hope I could help

• Satellite Pro A10: DVD rom sd c2612 stopped reading discs completely

  OK, I have a Satellite Pro A10, recently it is just stopped reading discs completely! Ive got no idea what wrong with and do not know if you need to replace? I prefer not too.

  If anyone has any advice on repairing it I would appreciate it. If not if anyone knows if there any compatible DVD readers writing? also the best place to buy?

  Help, please!

  Hello

  This does not sound well :( I think it could be a hardware problem maybe something wrong with the lens of the drive
  Anyway, usually it of not possible to fix these issues or it s not worth repairing, because the costs are too high
  Thus, it seems that you need to replace. But be careful. Not all readers are compatible because different master/slave/c-salt settings.
  I would recommend so contact the ASP in your country to get a compatible drive.

  But please try this proposal;
  Sometimes, the Player cannot read the Middle due to the incorrect registry key.
  Remove the upper and lower filter filter in this key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  and restart the laptop. Maybe it helps

  Good luck

• Satellite Pro L100 - DVD will not turn even upward

  My friend gave me an old Satellite Pro L100 PSLA4E 005009EN to look at. He acknowledges not or read the DVD. I tried using multimedia Nero, Cyberlink and VLC players, but they can't watch a DVD. A CD will play without a problem, but a DVD will not yet run abreast.

  When I look in my computer it says that a TSST Corp CD/DVD TS-L632M is installed, but when I look at the edge of the disc itself, it says DVD. R/RW with lightscribe? The software is also the original software yet.
  Since the downloads for this model of Toshiba page, I see that the TSST DVD - RAM drive was equipped initially to the laptop so I'm assuming that a DVD - RW was equipped afterwards?

  I find the hardware changes in device if Manager shows nothing. If I try to update the drivers found nothing? In desperation I tried to reinstall the drivers from the Toshiba site, but it does not help?
  If this is the case why Windows XP does not recognize a DVD - RW?

  If someone sees something I missed please?

  Hey,.

  Different laptops come with a different material maybe if the laptop was supplied with this player, but in my opinion it of important either.

  The fact is if DVD is not recognized it seems to be a hardware malfunction, but what you can do is cleaning the lens of the player with a Microfiber towel. Do it carefully you don't zero or destroy the lens (dust could be on the lens). After that he try again if it will recognize a DVD.

  Otherwise, the disc must be replaced and contact an authorized service provider. Guys can order a compatible drive and replace it. :)

• CD/DVD-ROM NOT DETECTED

  I bought a laptop (HP 2000-2d28tu) 6 months back. Unfortunately since last sound CD/DVD-ROM does not appear in any of the installed OSs, Win 7, Win 8 and Ubuntu i.e. also not in the BIOS settings. Please suggest proper advice?

  I would say that this need to be replaced. It seems it would be under warranty if it's only 6 mos old. If this is not the case, the part is not too expensive and it's pretty easy to replace. After the return if you ned more of help.

• Satellite Pro C660-1NQ does not detect the WLan network

  Hi guys,.

  We have a Toshiba Satellite Pro C660-1NQ here that does not at all, detect the wireless network
  I checked the Device Manager and the wireless card does not show here.

  I tried scanning for new hardware, but nothing was found. I tried to turn the wireless off tension with the function and the keys F8 but not yet showing in Manager devices or any new hardware...

  Any ideas as to what I can try next?

  See you soon,.
  Ash

  Hello

  It seems that the laptop would support the Wlan Atheros 802.11agn card.
  Usually the Atheros Wlan card must appear in Device Manager as on the menu network cards.
  If it s not appear do not then I recommend that you install the WLAN driver which can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  Choose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
  I hope this helps to detect the WiFi chip!

• DVD rom not detected in the Bios & windows

  Mr President, in my computer the dvd rom is not detected in the Bios & windows. Send me a PSE with solution please.

  Hello

  1. which version of the windows operating system is installed in the computer?

  2. What is the brand and model of the computer?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756

  (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I also suggest you to connect with the computer manufacturing and update drivers for BIOS.

• CD/dvd-rom not detected by Windows

  I have the same problem as the previous people, except that I can't download Mr. Fixit.  I get an error message.  I've had friends get into my computer to find my DVD - ROM drive and they can't find it.  They have removed upper and lower filters and may not always know where the cd/dvd-rom drive disappeared.

  Anyone know how I can download or access Mr. fix it so I can start trying to solve the problem

  I get a microsoft error message that says this:

  We're sorry, but we met an unexpected problem and cannot complete this diagnostic solution.

  You can use the link below to create a shortcut to our solutions set and try again later.
  Place a shortcut on my desktop for Microsoft Automated Troubleshooting Services fix it solution
  An unexpeced error occurred and were unable to create the shortcut.

  As I said we did the manual way and that did not solve the problem

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite Pro L300 - HDD is not detected

  My Satellite L300 hanged while I used it. I tried to restart, it just wouldn't start. It shows this message on the screen "no bootable device-insert boot disk and press any key" tried, but it still does not work. Then I tried using the restore disc. It then displays a message on the scree that the hard drive is not mounted which means that it does not detect the presence of the HARD drive.

  What can I do?

  Hey,.

  This looks like the HARD drive is not recognized, so your computer isn't able to boot and disk HARD recovery doesn't work correctly

  I recommend you check the BIOS if the HARD drive is recognized correctly. Usually in the BIOS, you should see the correct HARD drive model number and it would mean recognized s. Otherwise, the HARD drive is faulty and must be replaced

• Satellite Pro P100 - SD memory not detected

  Hi all

  I have a satellite pro p100
  and recently installed vista
  The sd slot is installed correctly on the Device Manager, but nothing is coming when I insert an sd memory card
  not even the reader saying 'nothing to.
  They appear on the Device Manager and it says "installed correctly."

  This same sd slot works fine on XP

  I tried to installed the XP drivers but, nothing seems to change
  I tried the 2 drivers in the list of vista, but they seem to be for the formatting and starting

  I'm starting to wonder if you can really read a memory card on vista?

  Thank you all

  Hello

  It seems that you are alone with this problem. is it possible to test it with other compatible maps?

  You have installed everything according to instructions facilities including Quick Fix Engineering version 92.81.90 document?

• Reader of CD-ROM/DVD-Rom not detected/recognized

  Earlier today, my DVD drive was working fine. My laptop a HP Pavilion dv9000 shut down on its own. When I restarted, the computer doesn't recognize any DVD/CD, I tried to insert.

  I ran auto Microsoft fix this program, but after several times it would not work and could not fix the drive, because he could not detect it. I also tried to delete the upper and lower registry (which has worked for me before, when this problem happened), but no record was available for me to remove it. I tried to find the drive in Device Manager, but were unable to locate him.

  What can we do?

  Hello

  You can try a system restore.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  If it does not remember all the steps you've taken must be repeated and
  You must follow ALL the steps below in any case, if the restoration is not enough.

  ==========================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log (ignore log checking for now).
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------------------------------------------------------------------------------------------

  After SFC and CheckDisk:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite Pro 6100: modem is not detected

  Hello

  Windows XP does not detect my modem.

  Driver downloaded from the toshiba Web site, instaled it and still not found modem.

  Any ideas?

  Thank you

  Hello

  In my opinion, there is hardware failure. The best way is to contact the Service of your country partner. They allow to check the unit. For the moment, you can try using an external modem. I don't know that one of your friends can borrow you a.

  Visit the Toshiba page under http://eu.computers.toshiba-europe.com. Click Download & support and you will find a link to the list of service partners.

  Good bye