Satellite Pro 2100: How do I order the recovery CD

Similar Questions

• Satellite Pro 2100: How do I reinstall the OS after replacing HARD drive

  I have a Toshiba SP2100 and I want to replace the hard drive, but I don't have any recovery CD
  So, how can I put the o/s back on?

  Try to connect the external HARD drive to the computer via the USB port and try to copy all content from the internal HARD disk external HARD drive. Then you could try to insert the external HARD drive in the laptop.
  But I've never tried this procedure and don t know if it will work.

  But usually after replacing HARD drive you should boot from the Boot CD as recovery CD or the original CD of Microsoft Windows.
  After the installation of clean Windows OS, you can visit the Toshiba drivers and you can download and install the drivers of Toshiba and utilities.

• Satellite Pro 2100; How to get additional software without recovery CD?

  How can I get the software WinDVD and Drag'n Drop CD for my Satellite Pro 2100 without the recovery disk?

  Post edited by: yirms

  This is not possible because this additional software is not available on the download page of Toshiba why?
  Because this isn't a Toshiba Software, but software manufacturers, 3rd party.
  This software comes with the recovery disc and can only be used with your laptop!

  I think it has something to do with licensing issues

• Satellite Pro A200-16N: can I use the recovery CD after upgrade to Vista

  HII!

  IM thinking of upgrading to windows vista on my Satellite Pro A200-16N and I ran the pre-upgrade of windows vista from microsoft website and it says that my system will be in charge of windows vista so im ok about it.

  The problem is that if my laptop was to break or something like that at some point, will my recovery CD provided by toshiba to work always on the laptop with windows vista?
  They will return the laptop for windows xp or from my laptop has another operating system they will not work?

  Also...
  What's the deal with BIOS? : S
  I don't understand!
  If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
  As I download the new drivers before upgrading Yes?

  Thank you!

  The restore CD will of course work.
  The recovery CD will always set the laptop back to the factory settings. This means that the whole HARD drive will be formatted and the image of Toshiba will be installed.

  > What's the deal with BIOS? I put t understand!
  > If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
  To my knowledge, that this laptop was already shipped with Vista, so you need not update the BIOS if you want to reinstall Vista.

  Some series Satellite A200 needs a BIOS update if you want to use the XP.
  In such cases, it s advisable to upgrade the BIOS to version XP first, then install OS X.

  Best regards

• Satellite Pro 2100: How to enter the BIOS?

  Hello
  I have a sat 2100 pro, I find nothing in the manual on the subject to get into the bios, I have tried a few F keys but without success, what am I doing wrong? How to do in the bios?, as I get a beep sharp inside the computer laptop beeeeep, what is this? its not an overheating?

  Thanks for your time.

  Try the ESC and then F1

• Satellite Pro U400 - How can I get the native screen resolution for external monitor?

  I have a samsung syncmaster external screen connected to a Satellite Pro U400.

  The resolution of the screen goes up to 1280 etc. but the minimum samsung is 1440 x 920 (ish I forgot).
  How can I get the samsung to display full screen expanded to save my eyes of the realativively small screen internal?

  Hello!

  Have you tried to update the display on your laptop driver? Check the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
  And what operating system are you using? Have you installed all Windows updates?

  For external LCD, monitors, you must set the screen refresh rate of 60 Hz.
  And if you want to change the resolution of the screen, you must select the second monitor in the graphics options on Windows.

  Good bye

• Satellite Pro A40: How can I change the video ram

  Hi I have an A40 my Ram video machine is set to 16 MB maximum is 64 MB
  How can I change my 64 MB
  I tried the bios theres nothing in there that will change, I have the latest version of the bios of the machine V1.50

  what someone of nowhere leaving to do this please

  Jay

  Hello

  As much as I know the of A40 Satellite Pro supports the Intel 852GME shared memory graphic card.
  S control Intel cards automatically memory allocation.

  This means that if the graphic card must more 16 MB of memory, the graphics driver will share the part of main memory!
  The whole process runs automatically and you do not need to change anything!

• Satellite Pro A120: How do I remove the CD/DVD drive

  I have 2 main problems and doesn't seem to completely open the case.
  Does anyone know how to remove the dvd - rom?

  But my mainproblem is swith power Ribbon (blue) has come off the motherboard. But as I can't open completely the case im with tweezers for trying to recconect.

  Does not seem to want to go.
  Is there a clip into the connector on the motherboard or is it just push in? A picture or a diagram would be helpful.

  Any help would be appreciated.

  Thank you

  One question; Why are you doing this?
  I mean why you want to open the notebook?
  Always it is that Satellite Pro A120 is not an old notebook and I presume that the guarantee is valid.
  If you remove the lid of the laptop, you will lose the warranty!

  The removal of CD/DVD is very easy.
  Usually, it is fixed with a screw located at the bottom of the unit. You have to remove first, and then he should be able to take off from the STRANGE.

• Satellite Pro L20 - How can I change the optical drive?

  I want to change the optical drive in a satellite pro L20 but I'm having trouble finding instructions on how to remove it. Can anyone help?

  The CURIOUS reader is fixed with a screw at the bottom of the unit. Then, turn the computer over and remove one screw an optical disk drive.
  The second screw is hidden under the keyboard. That's why this screw must be removed also. And then disconnect you should be able to pull-out of the optical drive.

  But note; If you have no experience of these things, ask a technician for laptop computer to help him.

  Good luck

• Re: Satellite Pro L300 - how can I reset the BIOS password?

  I put the password on the BIOS and electric start and I forgot the password.
  How can I reset the password?

  I have a Toshiba Satellite Pro L300.

  You must bring the laptop to an authorized service center to remove the password.

  Which country are you? Check your local Toshiba Web site for a list of the ASP (service centres).

• Satellite Pro 2100 - where can I download the drivers

  Hi all

  My friend has just been given a Toshiba Satellite Pro "sp2100" model number sp210e - 006p 9 - 4 d

  Although I can find plenty of mentions on Google I can't find this model on this website to download the drivers. I go as far as to select "series A, L, M, P, S, or U but I don't know which to choose and the search of the site for both sp2100 or sp210e - 0066 p 9 - 4 d takes a void."

  Any help would be appreciated.
  Thank you
  Pete

  Hello

  The drivers, that you can find on the Toshiba site so I put t where is the problem. You must search in * Archives * because it s a phone older.

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
  * Archive *-online satellite Pro-online Satellite Pro 21xx

• Satellite Pro L - how can I update the driver chipset?

  I need to update the graphics driver for my 965 chipset. I downloaded what I thought was a driver out of date on the Toshiba site, but when I went to install, I get an error message indicating that my system does not meet the minimum requirements. If I try to install a driver from Intel site, it tells me to get the driver of my manufacturer...

  All tips (dumbed down please) Nice.

  Thank you

  Hello

  Can you please tell us what Satellite Pro laptop computer you have exactly?

  Normally before update you a driver, you must uninstall the old version first. Reboot the laptop, then I recommend that you install the most recent version.

  By the way: I had a similar that I deliver couldn t install new Intel driver. I solved the problem if I install the manual of the driver through the Device Manager and of the Advanced installation routine. I chose the directory driver myself and it worked! :)

• Satellite Pro 6000 - how can I update the BIOS?

  Hi all

  I have the problem that my laptop does not start 9 of 10 times with the message: * block 1 BIOS is damaged, call your service man.

  I want to update BIOS but for the Satellite Pro 6000 I can only find an update the BIOS from Windows. But my laptop does not start! Rarely the machine starts, but when I try to update the BIOS, I get the message that I already have the latest version of the BIOS

  My questions:
  * Is there a BIOS update file that is a BIOS floppy? (for example the Satellite Pro 6100 has 2 BIOS files, 1 Windows and 1 making a floppy disk)
  * Is it possible to update the BIOS with the same version of Windows?

  Or perhaps there is another solution for this problem? Has no need to update my BIOS?

  Thank you.

  Hans

  Hello

  I agree with Luke.
  The rom Bios module seems to be damage.
  Either it must be replaced or flashed again.

  But you won't be able to do that! The update of the Bios on the Toshiba page focuses on winning and you will not be able to update if the windows are not running.

  You last chance is an ASP that could check the BIOS ROM.
  As I said, most high, maybe new reflash module Rom help but cela can be answered simply by an ASP technician who checked this.

• Satellite Pro M70: How to connect to the internet using a second computer

  I have a Toshiba laptop Satellite Pro M70 with a RTL8139/810 x Family Fast Ethernet NIC use this, the laptop was connected to a desktop PC, whereby it is connected to the internet via a modem ADSL (USB) on the desktop. The laptop runs XP Pro; the desktop has XP Home.

  My laptop has been a nasty virus. When removing it, he lost the ability to network. I tried "repair network", but he could not find an IP address. In the end, I had to manually set an IP address for the network to work again. You use IPCONFIG release and renew the IP addresses that failed - unable to connect to the DHCP server.

  He could now see the Office network and Exchange files across be it, but it could no longer contact internet.

  I decided to reinstall the OS on the laptop, but this does not solve the problem. I still have to manually set the IP on the laptop. I can connect two PCs, but does not see the internet from the laptop on the network.

  If I connect the laptop directly to the internet via the modem, it works fine. I can even access the internet from the computer on the network when this is the laptop that has the internet connection.

  The virus could have damaged the Ethernet controller, or she affected somehow?

  Is it possible to test?

  Have you advice?

  Hello

  The virus was detected on the laptop you so maybe your PC has also been affected.
  Did you check if the laptop and the PC using the same workgroup?

  XP supports a help option. There, you might choose the Internet Connection Sharing Troubleshooter. "

  Maybe it helps

• Satellite Pro A300 - How can I change the size of the partition?

  Hello
  My Satellite Pro A300 came with 2 different partitions, and I would like to change the size of the partitions (the data partition is too small).

  Which would affect the recovery tools? Is there proposed formulas?

  Thanks in advance,

  Andres

  What operating system do you use on your laptop?
  If you use Vista, this document could be useful for you:
  http://195.182.196.33/KB0/TSB7101OB0006R01.htm

  This should normally does not affect the recovery of HARD drive but make sure to burn the disc of recovery if you didn t it yet.

  If you have the recovery disk, you are on the safe side.