Satellite Pro 2100 - no wireless connection

Similar Questions

• Re: Satellite Pro A300-1EA - wireless connection, drop all the time

  Hi, I have a problem with my wireless connection fall all the time on my Satellite Pro A300 1EA.

  It happened earlier, but I've fiddled about a little with change of drivers and the removal of the connection settings for the registry and it then worked fine for months, until yesterday.

  There were several updates for Windows installed yesterday, but none of them have been updated driver for the wireless card, and they don't look like they should cause problems. The fact that the problem happened before makes me think that the updates can be anything to do with it.

  I use the * Intel PRO/Wireless 3945/4965/5100/5300 * for Vista 32 - bit version 12.2.0.11.3 drivers from the Toshiba download page.

  Other computers on the same access point have no problem, so I think it is specific to this laptop. The connection speed is normally 6 Mbps, but I cannot even check e-mail now without the abandonment of the connection.

  Laptop will be thrown against a wall soon if no one can help you.

  Thanks in advance.

  Edit: I've already made sure power settings are at maximum to the WLAN card, even if on battery, or what power management.

  Post edited by: mjbcrawf

  Hello

  Have you tried to use the Windows System Restore feature? After that your WLAN should work fine again.

  In addition, I can recommend the latest WLAN driver in the Intel page, it s version 12.4.xxxx. I installed the driver on my Qosmio laptop and don t have any problems with it: [www.intel.com].

  If you have any other questions, please let us know!

• Satellite Pro L300D loses wireless connection randomly then can never find

  Hello

  My Satellite Pro L300D loses the wifi connection at random times and I have to turn off the network for the L300D BT box to connect again. Throughout this, my other laptop Toshiba works fine on the network, as does my PC, so the network is fine.

  It's incredibly frustrating because I have a new baby and get NO SLEEP - I just need the L300D blasted to work!

  Any help would be good and would save me lose any more hair.

  Thank you

  James

  one of the two: or the Ruter have electrical problems, but you said that another computer is not working properly, so it must be a physical problem with the unit your problematic computer wireless, if wireless is the drop of water at all times, you must check this problem with a service provider.

  If you don't know where you can find one, visit this Web page to locate your nearest Prov. Serv.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?subs=TAIS

  I hope this helps.
  / * HEAVY METALL. \

• Satellite Pro 2100: PCI Wireless card

  Install a PCI card Broadcom wireless and need to know where the overhead wires are routed (screen or base) so that I can try and extend one is short of 1 cm-oh and make black and white colors correspond to large and in the?

  Hello

  As far as I know white cable goes to the ESSENTIAL and a black to the power supply if you need some specifications or documents on how to disassemble the device it can be a problem because it's not in public.

• With a Satellite Pro 2100 wireless network connection

  Even though my work laptop has a switch (power) wireless and DIRECTED on the side (under the floppy drive), it does seem to pick up a wireless connection, or have wireless options on the corresponding section of the control panel.

  Is it a hardware problem (that is to say he is ready wireless, but has not installed) or a Windows problem?

  Thank you

  Hello

  The WiFi card is optional on the Satellite Pro 2100.
  In this case, it is possible that your device has all switches but no card WLan.
  I recommend you to check the Device Manager. There you should find the WiFi card network card is installed.

• The Satellite Pro 2100 wireless

  I downloaded the driver for the Lan Card wireless built-in in my Toshiba the Toshiba Satellite Pro 2100 Web site.

  However when I follow their instructions on how to install it:

  1. in the [start] menu click [Control Panel], then click on [switch to view beds].

  2. double-click [System], and select the [Hardware] tab.

  3. click on [Device Manager].

  4. increase [ECS] and double-click [wireless network connection].

  However, when I'm around a wireless network connection is not.

  I looked all hidden devices, and it's not listed here.

  I looked in the BIOS but nothing is in the list.

  I have the switch on the side of the case as well, but the light...

  If I try the add / remove option of material for a new network card driver window is empty when I choose the. Download of Toshiba INF file.

  Have also updated the BIOS!

  Any help would be much appreciated!

  Hello

  You built the only card or wireless card was already installed? As far as I know, this unit is ready wireless and the wireless card can be built more.

  If the wireless card is installed properly, it must be recognized by the system and shown in the Device Manager, but in your case, the card is not recognized correctly.

  Please give us more information.

• Satellite Pro 2100: card network wireless not recognized after upgrade

  I have a Satellite Pro 2100 ad I used successfully a PCIMCIA 802. 11b card wifi for two years.

  Studying the manual, I discovered that the notebook is "wifi ready" (it has a wifi switch, a switch wifi of Alt - F8, and a section of the manual).

  I opened a Bay and found out a mini-pci slot. That's why I bought an Intel 2200 BG wireless adapter and I put it inside, which connects the sons of two antennas, located in the Bay. Finally, I was ready to son mask 11 and 13, as suggested in many forums. But when I put the card inside, unknown electrically. It seems that the mini-pci slot must be Electric.toutes impossible. My Bios is not impossible, but it.

  In another Bay close to the mini-pci card, I discovered an empty shell for a chip. Is this an impossible chip?

  Hello

  As far as I know that this unit is about 4 years old and at that time the unit is tested with the wireless network card with the PA3212U-1MPC part number. This map has been tested, is also compatible and can be used.

  I put t know what is going on exactly in your case, but new material should be recognized and the driver must be installed. I put t know what you mean exactly, but can you please explain exactly the situation?

  The card is correctly recognized and installed in the Device Manager?
  You can use FN + F8 key combination to activate the wireless card?

• Need to find the cmos on Satellite Pro 2100 battery

  I have a laptop that is not keep date/time settings and I need to identify the laptop to find the correct instructions to take apart.

  The brand is a Satellite Pro SP2100, model PS210E006P9-EN number, but I can't find this brand/model on the Toshiba site. The closest I can find is Satellite 2400-103, part number: PS240 - T 014, 1, that seems identical.

  I tried to use the identify tool of Toshiba to detect what is the laptop, but that fails to provide results.

  I also need to find out what food is for this unit as the current is defective and exposed wires.

  The adapter of current with her is PA3201U-1ACA, the problem is that this card has another card on the end to fit the power plug to the back of the laptop. The connector at the end of PA3201U is too thin to fit.

  Hello

  This laptop is very old and the name of this machine is: Satellite Pro 2100 PS210E

  > I have a laptop that is not keep date/time settings and I need to identify the laptop to find the correct instructions to take apart.

  Usually the CMOS battery can be charged. You must connect the power adapter and the laptop must be powered for about 12-14 hours.

• Satellite Pro 2100 two cables behind the screen

  Hi, first post so be gentle with me please.

  I have a Satellite Pro Satellite Pro 2100 and the hinges are shot, so I bought a 2100 piece to Exchange.
  Everything was ok except that I have two sons that I can't find a place to plug in. A black white and they are attached to the small square gold Ribbons that are glued to each top corner at the back of the screen. The other ends have little, but when I stripped the laptop they were in bulk and I do not see where they are going.

  However, the laptop works fine without them.
  Can anyone help please?

  All laptops with WLAN have this. WLAN antenna is placed behind the screen and these two wires must be connected to the WLAN antenna.

  If your laptop doesn't have WLAN card put just the cables aside and everything will be OK.

• Need administrator rights for the Intel on Satellite Pro 2100 speed step

  Hello
  I have a Satellite PRO 2100 (Pentium 4 1.9 GHz).
  I have a problem with the function of the Intel speed step, which reduces the speed of the processor at 1.2 GHz. But I have a problem: I can do this, if I use an administrator account...
  After starting, if I connect with a simple user account, the Intel speed step works... and the speed of the cpu remains at 1.9 GHz.
  So I would like to use this function with a simple user account, how do I do it please?

  Thanks for your help :)

  Hello

  As far as I know that this application is not shipped with the image of Toshiba and it s not made not part of the image.
  But I put t see any big problems. You will need to change your account administrator rights. In this case, you will need to ask someone the admin right to edit your account.

  The other possibility is to change the law for this software. There can be changes as by admin. What you can change in the Security tab in the program properties. Full control must be set to all.

  Then, it should be possible to use this application with your account.

• Satellite Pro 2100: Quick fix does not work with Win XP SP2

  pilots quickfix for win xp on my toshiba satellite pro 2100 does not say pilots should xp without service Pack 2.
  Are there drivers for Windows XP service pack 2?

  Please do not mix the pilots and quickfixes. Install Windows XP SP2 home edition on your laptop, install the drivers for the chipset, screen, sound, LAN and other hardware components.

  When you are finished connect your laptop to the Internet, make windows update, restart your computer, and enjoy your life.

• What card WiFi could be compatible with Satellite Pro 2100 PS210E

  I have an old Satellite Pro 2100 PS210E-005ES-FR part number and trying to locate a Wifi card to fit.

  If someone can advise on such a map, can you?

  Hmm, the satellite Pro 2100 seems to bear the USB 1.1.
  There could be a slow data transmission using a USB WiFi key. So I advise to use a wireless network card internal minPCI as suggested above.

  I discovered that this Kit (PA3212U-1MPC) wireless LAN card could also be used too.

• Need sound card for Satellite Pro 2100

  I need a sound card to my Satellite Pro 2100. Are there any trader can I go?

  Hello

  Compatible parts as sound cards, wireless network cards, etc., you can order the Toshiba authorized service partner in your country.
  Please visit this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  You will find the Toshiba service that is responsible for your country.

• Looking for old Satellite Pro 2100 does not not for spare parts

  Hello

  I tried to replace my keyboard with a new (no problem, I could order it) on a Satellite Pro 2100.

  Unfortunately the keyboard "cable" must be plugged into the motherboard using a little white girl 'thing' to keep the cable attached to the motherboard.

  Unfortunately, I lost this small 'thing' white.

  So I'm looking for an old Satellite Pro computer where I can take it to does not.

  Or if somene has a better idea, please let me know at:

  [email protected]

  Thx a lot

  I think you mean the PJ11 connector.
  This PJ11 is placed on the motherboard and the flat keyboard cable must be connected to this connector.
  I m not 100% sure but I think the PJ11 is mounted on the Board and I wonder how someone can lose it.

  If you need a look of old Sat Pro in eBay. You should find something

• Satellite Pro 2100 is really really slow running

  I have a satellite pro 2100 I killed a friend.
  He said his brother gave him and that he had no idea what was wrong because he didn't have a chance to watch it.

  I put windows xp pro top and used the bottom of the laptop pro license key.

  but the laptop is really really slow.
  It may take up to 5 minutes for nothing I click to open up.

  the strange thing is the laptop works fine in safe mode, can open things like I should.

  but in normal windows mode, it slows down to a crawl and even crashes.

  I have trie all to my knowledge.
  I even uninstalled and turn off the graphics drive that I thought that he maybe, but he always does.

  I tried multiple copies different from xp pro and even tried a copy of vista, but still the same.

  He had 2 different lots of tried in ram, 2 sticks was new aswel. I tried 3 different hard drives and still the same.

  My thoughts are that the integrated graphics card is exhausted.

  can anyone else confirm this? Certainly this isn't a software issue because I tried a few different copies of xp and vista. IM about to bin it now.

  > anyone can confirm this?
  Don t think someone could confirm everything that is related to a malfunction of the equipment.
  Here in the forum, we can talk about problems and makers of disorders, but no one will be able to say with certainty what's going wrong here.

  First laptop computer is an oldie.
  The Mobile Intel Pentium 4 CPU, isn t a up to date CPU and in my opinion, that don't expect too much performance.

  I put t know how this camera supports memory but everything below 1 GB of Ram would be good enough to the smooth running of the laptop.

  However, given that the unit works much faster saving mode, I guess there must be a hardware related problem.