Satellite Pro 2100 won't start at all - LED flash

Similar Questions

• Satellite Pro 6000 won't start or do something

  Hello

  My satellite pro 6000 stopped working all of a sudden.
  Power led, battery, keyboard LED is on, but nothing happens, tried to remove the battery, cd, hd and put them back, nothing seems bad.
  Also tried the back button back in case but no tip was not all good.
  It just won't start at all.

  Any ideas out there?

  Thank you

  [Edited by: moderation of the Forum]

  Do the job of seem´to LEDs ok, or they do a code flashing for you say that it is something wrong?

• Satellite L30 PSL33E won't start at all - the LED blinks 6 times

  Hello

  My poor mother is quite upset! Its Satellite L30 PSL33E just died.

  It completely off and now won't start at all.
  Orange light flashes six times when you press the power button.
  No hard drive, fan, screen or any other noise / activity.

  She tried without the battery.

  A kind of hardware failure, I guess.

  Any ideas what this blink code means?

  Thanks in advance,
  D.

  I put t know what the code means, but you can read it. short means 0 and 1 long

  In any case, the error code means that a hardware failure has been detected on the motherboard and motherboard replacement could help you?
  Why?

  because what is really hard to fix a motherboard for laptop very s.
  It especially not possible if you n t s have sufficient knowledge, experience, and special tools.

  I think that either you contact the ASP in your country and ask a difficulty or you'll have to buy a new laptop ;(

• Satellite Pro M30 won't start all of a sudden

  I'm looking for assistance with feeding issues.
  For some reason my M30 Pro Sam wants not start all of a sudden.

  When I press on, the light blinks for a milliseconds and then nothing happens outside the DC flashes orange.
  I tried to start on battery only and DC only and nothing seems to work.
  I can't get anything to work - ideas?

  Think you that adapter, AC power or internal battery is dead?
  I only just got it repaired a month or he is before the end of the warranty but its all done now so have that support.

  see you soon

  Hello

  This looks like a motherboard problem and not a battery or an AC adapter problem.
  The LED provides an error code which can be read by a technician for laptop.

  Generally, the warranty covers the part repaired for about 6 months.
  If the defective part has been fixed then a month ago and the same part failures again then the warranty should cover the replacement.

  In this case, you must call the ASP in your country and should explain the issue

  Good luck

• Satellite Pro P200 won't start

  I have an old 1 week per Satellite Pro P200, it turns off when I was just in the start menu, so I was not doing something out of the norm (power cable is plugged). Since then it just won't turn.

  With the connected power cable I have an electric blue, power battery and light (although attempts to restart about 2 the battery light was red, but now blue). The drive light flashes for about 3 seconds each time I try to start and I can hear something happening inside the machine, but after only 3 seconds... nothing, completely dead.

  I tried to remove the battery, wait 20 minutes or more and none of it worked. Anyone have any ideas?

  Seems to be definitely a hardware problem... very bad :(
  Why you visit your dealer for new laptop and ask for Exchange.
  Maybe the dealer will exchange the laptop with a new.

  If this isn't the case, then you must contact the service provider authorized in your country for assistance.
  If you have purchased an extra service on the spot then the technician you will visit at home and will try to solve this problem.

  Good luck

• Satellite Pro A10 won't start HARD drive

  I have a Satellite Pro A10 that is not responding. If I have the connected HARD drive I get a ' insert System Disk... "message, I checked the HARD drive with a 2.5" USB connector in another computer and it seems OK.

  The laptop, I cannot change the boot order to select CD-Rom so that I can try the recovery disks. I can't get into the BIOS, but the Boot Priority option is not selectable.

  Any help appreciated.

  Especially this error message appears because the Middle starts not able.
  You insert a boot able CD?

  Try this: connect the computer laptop HARD drive to a USB adapter and try to format the whole HARD drive.
  Then put it in the laptop, insert the bootable CD and try to boot from the drive.
  As mentioned you could press the C button immediately after you start the laptop

• Satellite Pro 4600 won't start

  I have a Satellite Pro 4600 w / Win2000, 15 GB HD, CD-ROM, P3 800 Mhz, 128 MB of RAM. It will not start. I can plug in the power cable and the lights show the battery is loaded or loads, the power is connected. When I press the button I get no sound from the laptop (no fans or HARD drive) and there is nothing from the HARD disk (no light whatever it may be), but the "On" indicator light turns green even if nothing else happens. Someone at - it an idea what could be wrong with that, and if/how I could fix it?

  Thank you, Adrian

  Hi Adrien,.

  As a first step to diagnose your problem, I suggest you to unplug the unit from AC power and also remove the battery completely. Reconnect AC power and try to turn on the unit. If it works then stop it and reinstall the battery and try to turn on the unit again.

  If the procedure above does not solve your problem, then it is likely that there is a problem with the internal components of your laptop in which case you will need to be serviced by an authorized Service partner.

  Kind regards

• Satellite Pro A300 PSAGDA won't start at all after flash Bios 1.90

  I have an A300 PSAGDA-01Y00R.

  I tried to Flash the bios to version 1.90. He started the process, and when I came back an hour later the cell phone was off.

  When you turn it on, it has nothing now. I tried removing the battery and running on sector only.
  Works for keyboard (as in light) and power works, but there is absolutely no action on the screen.

  Is there anything I can try?

  Hello

  Try this;
  Remove the battery, disconnect the adapter and wait 1 hour.
  Then connect both devices and try to turn on the unit.

  If this will not help, then you will need to contact a local ASP.
  It seems that something was wrong during the BIOS update process and therefore, the laptop can not initialize correctly.

  I put t see another solution for your problem

• Satellite Pro 6100 won't start

  When I turn on my laptop, shows the toshiba start page, then the cursor blinks in the upper left corner then nothing.
  is this a virus?
  Anyone have any ideas?

  Hello

  I put t think that it s a virus. It seems you laptop cannot find a boot device.
  Is it possible to get into the BIOS?
  Please use the ESC key to enter the BIOS. There you can check if the HARD drive is properly recognized. Please also check the frequent priming.

• Satellite Pro L20 won't start on battery

  Hello
  I have a L20 sitting Pro and it wouldn't boot on battery; I need to plug in the area of work. It indicates the battery level is 88%. The laptop is less than a year old, so I don't think that there is a problem with the battery.

  Thank you.

  Maybe there is something wrong with the power of electronic power supply on the motherboard?
  You info, the guarantee must be valid. Then, immediately contact the Asp in your country and ask for the manipulation of the Fryer.

  Good luck

• Need administrator rights for the Intel on Satellite Pro 2100 speed step

  Hello
  I have a Satellite PRO 2100 (Pentium 4 1.9 GHz).
  I have a problem with the function of the Intel speed step, which reduces the speed of the processor at 1.2 GHz. But I have a problem: I can do this, if I use an administrator account...
  After starting, if I connect with a simple user account, the Intel speed step works... and the speed of the cpu remains at 1.9 GHz.
  So I would like to use this function with a simple user account, how do I do it please?

  Thanks for your help :)

  Hello

  As far as I know that this application is not shipped with the image of Toshiba and it s not made not part of the image.
  But I put t see any big problems. You will need to change your account administrator rights. In this case, you will need to ask someone the admin right to edit your account.

  The other possibility is to change the law for this software. There can be changes as by admin. What you can change in the Security tab in the program properties. Full control must be set to all.

  Then, it should be possible to use this application with your account.

• The Satellite Pro 2100 wireless

  I downloaded the driver for the Lan Card wireless built-in in my Toshiba the Toshiba Satellite Pro 2100 Web site.

  However when I follow their instructions on how to install it:

  1. in the [start] menu click [Control Panel], then click on [switch to view beds].

  2. double-click [System], and select the [Hardware] tab.

  3. click on [Device Manager].

  4. increase [ECS] and double-click [wireless network connection].

  However, when I'm around a wireless network connection is not.

  I looked all hidden devices, and it's not listed here.

  I looked in the BIOS but nothing is in the list.

  I have the switch on the side of the case as well, but the light...

  If I try the add / remove option of material for a new network card driver window is empty when I choose the. Download of Toshiba INF file.

  Have also updated the BIOS!

  Any help would be much appreciated!

  Hello

  You built the only card or wireless card was already installed? As far as I know, this unit is ready wireless and the wireless card can be built more.

  If the wireless card is installed properly, it must be recognized by the system and shown in the Device Manager, but in your case, the card is not recognized correctly.

  Please give us more information.

• Satellite Pro 2100 is really really slow running

  I have a satellite pro 2100 I killed a friend.
  He said his brother gave him and that he had no idea what was wrong because he didn't have a chance to watch it.

  I put windows xp pro top and used the bottom of the laptop pro license key.

  but the laptop is really really slow.
  It may take up to 5 minutes for nothing I click to open up.

  the strange thing is the laptop works fine in safe mode, can open things like I should.

  but in normal windows mode, it slows down to a crawl and even crashes.

  I have trie all to my knowledge.
  I even uninstalled and turn off the graphics drive that I thought that he maybe, but he always does.

  I tried multiple copies different from xp pro and even tried a copy of vista, but still the same.

  He had 2 different lots of tried in ram, 2 sticks was new aswel. I tried 3 different hard drives and still the same.

  My thoughts are that the integrated graphics card is exhausted.

  can anyone else confirm this? Certainly this isn't a software issue because I tried a few different copies of xp and vista. IM about to bin it now.

  > anyone can confirm this?
  Don t think someone could confirm everything that is related to a malfunction of the equipment.
  Here in the forum, we can talk about problems and makers of disorders, but no one will be able to say with certainty what's going wrong here.

  First laptop computer is an oldie.
  The Mobile Intel Pentium 4 CPU, isn t a up to date CPU and in my opinion, that don't expect too much performance.

  I put t know how this camera supports memory but everything below 1 GB of Ram would be good enough to the smooth running of the laptop.

  However, given that the unit works much faster saving mode, I guess there must be a hardware related problem.

• Satellite Pro 2100: is it possible to upgrade memory 1 GB?

  Hi sat 2100 and looking at 1 GB but laptop reconises only 512 meg and wont work at all with 2 x 512.
  Would be a bios update help?

  Thank you
  Steve

  Hello

  According to this site about Satellite Pro 2100 memory, the laptop supports 512 MB max.
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7444&ft=m&St=3

  It is the maximum value that can be used in the notebook.
  The BIOS will not help because it is a hardware limitation of motherboard!

• Satellite Pro 2100: TEAC CD drive problem - cannot access CDs

  Hey

  I got my Satellite Pro 2100 for another few years.
  So far it has worked well.
  However, now the cd player is always displayed the yellow light just after trying to load a cd, followed a quiet thump. This means that I can not access the content of the cd (audio or data).

  The drive is still recognized by Device Manager, and I'm told it works well - I know better however, it most certainly isn't! the drive will still appear in my computer, and I can always try and discover the contents of the cd inserted, which is always empty!

  Ant help or advice would be most appreciated, because I really want to re-preparation of the system!

  Hi Simon

  The satellite Pro 2100 is an oldie ;) and I guess that you pointed out the CD/DVD drive all the time long.
  I would not be surprised if this player is dead. For me, it looks like the end of the device.

  Until it must be said that I'm afraid you need to replace the CD/DVD drive with a new m.

  Best regards