Satellite Pro 2100 Wont initialize the

Have used this laptop for many years without any problems, that is until today. the laptop will not start.
DC in 15V Ok.
Light green power on.
Green on drums.
HARD drive integrated offshore.
When I pressed the Start button, thought I heard two short beeps.

Can someone please help?
Kimberlin

Hello

Have you seen something on the screen? Maybe an error message which says that no source of start-up has been found or something like that?

There are several times my laptop could not initialize. I simply unplugged the AC adapter, I removed the battery and I waited about 20 minutes.
Then I plugged everything again and the laptop started

I put t know if it will help you, but you know it's free ;)
So, check it

Tags: Toshiba

Similar Questions

  • Satellite Pro 2100: to use the multimedia key

    Help!

    Do not work the multimedia keys!
    Who knows this that prompt what exactly the driver and utilities, there must be?

    First of all, you should post what OS you have.

    If you use Windows XP, you must install the common Modules and controls.

    Two applications, you can find on the European driver Toshiba page-> * ARCHIVES *.

  • Need to find the cmos on Satellite Pro 2100 battery

    I have a laptop that is not keep date/time settings and I need to identify the laptop to find the correct instructions to take apart.

    The brand is a Satellite Pro SP2100, model PS210E006P9-EN number, but I can't find this brand/model on the Toshiba site. The closest I can find is Satellite 2400-103, part number: PS240 - T 014, 1, that seems identical.

    I tried to use the identify tool of Toshiba to detect what is the laptop, but that fails to provide results.

    I also need to find out what food is for this unit as the current is defective and exposed wires.

    The adapter of current with her is PA3201U-1ACA, the problem is that this card has another card on the end to fit the power plug to the back of the laptop. The connector at the end of PA3201U is too thin to fit.

    Hello

    This laptop is very old and the name of this machine is: Satellite Pro 2100 PS210E

    > I have a laptop that is not keep date/time settings and I need to identify the laptop to find the correct instructions to take apart.

    Usually the CMOS battery can be charged. You must connect the power adapter and the laptop must be powered for about 12-14 hours.

  • Satellite Pro 2100 two cables behind the screen

    Hi, first post so be gentle with me please.

    I have a Satellite Pro Satellite Pro 2100 and the hinges are shot, so I bought a 2100 piece to Exchange.
    Everything was ok except that I have two sons that I can't find a place to plug in. A black white and they are attached to the small square gold Ribbons that are glued to each top corner at the back of the screen. The other ends have little, but when I stripped the laptop they were in bulk and I do not see where they are going.

    However, the laptop works fine without them.
    Can anyone help please?

    All laptops with WLAN have this. WLAN antenna is placed behind the screen and these two wires must be connected to the WLAN antenna.

    If your laptop doesn't have WLAN card put just the cables aside and everything will be OK.

  • Help identify the Satellite Pro 2100 download driver

    I have a Satellite Pro (marked below as a PS210E-00C3G-EN and a P4 2000/256/30 G, 15XT, CDW, LW). I think it's a satellite Pro 2100, whatever.

    Problem I have is that when it comes to downloading the drivers, I can't find anything approaching this model of the selection process. I've searched the forums and there's not much on this machine otherwise than in this one, so I was hoping someone could help me identify this machine especially for driver downloads... Yes, guess who has reinstalled Windows XP without checking I had all the specific stuff Toshiba tucked away first?

    For now, I have a load of things works without drivers, and it is not at all optimal...

    Thanks in advance

    J

    Toshiba European driver on this page;
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU#

    and choose;

    The Satellite Pro Archive Satellite Pro Satellite Pro 2100 21xx archives *.

    Then you will find all drivers available for this machine Toshiba ;)

    Good bye

  • Need administrator rights for the Intel on Satellite Pro 2100 speed step

    Hello
    I have a Satellite PRO 2100 (Pentium 4 1.9 GHz).
    I have a problem with the function of the Intel speed step, which reduces the speed of the processor at 1.2 GHz. But I have a problem: I can do this, if I use an administrator account...
    After starting, if I connect with a simple user account, the Intel speed step works... and the speed of the cpu remains at 1.9 GHz.
    So I would like to use this function with a simple user account, how do I do it please?

    Thanks for your help :)

    Hello

    As far as I know that this application is not shipped with the image of Toshiba and it s not made not part of the image.
    But I put t see any big problems. You will need to change your account administrator rights. In this case, you will need to ask someone the admin right to edit your account.

    The other possibility is to change the law for this software. There can be changes as by admin. What you can change in the Security tab in the program properties. Full control must be set to all.

    Then, it should be possible to use this application with your account.

  • The Satellite Pro 2100 wireless

    I downloaded the driver for the Lan Card wireless built-in in my Toshiba the Toshiba Satellite Pro 2100 Web site.

    However when I follow their instructions on how to install it:

    1. in the [start] menu click [Control Panel], then click on [switch to view beds].

    2. double-click [System], and select the [Hardware] tab.

    3. click on [Device Manager].

    4. increase [ECS] and double-click [wireless network connection].

    However, when I'm around a wireless network connection is not.

    I looked all hidden devices, and it's not listed here.

    I looked in the BIOS but nothing is in the list.

    I have the switch on the side of the case as well, but the light...

    If I try the add / remove option of material for a new network card driver window is empty when I choose the. Download of Toshiba INF file.

    Have also updated the BIOS!

    Any help would be much appreciated!

    Hello

    You built the only card or wireless card was already installed? As far as I know, this unit is ready wireless and the wireless card can be built more.

    If the wireless card is installed properly, it must be recognized by the system and shown in the Device Manager, but in your case, the card is not recognized correctly.

    Please give us more information.

  • A few questions regarding the hardware upgrade and the games on Satellite Pro 2100

    Hey,.

    I thought that posting this here because it's more about the lines for the games I could think on another topic.

    I'll get to the point... Basically, I bought a laptop from a guy that my friend knew. He barely used this laptop and didn't know anything about computers, and he tried to avoid as much as possible. So he got rid of this laptop for me for real cheap.

    Now I got it, I had expected either of two things with the laptop.

    (1) what I'll use it so I can sit in his bed and travel a little bit while having files, movies, music and internet access. (it wasn't my main idea)

    Or

    (2) it allows to play video games on it, or to update, so I have a better chance to do so.

    I was hoping to get for video games, mainly for my brother to use because his computer is lagging a lot while playing world of Warcraft. I was hoping that this notebook would give him a better experience for a while.

    But as I was installing the game on this, I noticed that the disk space is low, so I'm going to buy an external hard drive, so I can send files between the PC and the laptop, and I got an error message saying that the RAM was under "minimum requirements" for WoW.

    So I know that I got to level it with something big, but I know not what, so I'm not quite sure that this laptop will run the game at a decent rate. So I thought that I turn to a computer forum and ask.

    It's my laptop;
    [Satellite Pro 2100 PS210E | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook = Yes & PRODUCT_ID = 45659 ie]

    This laptop will do the job don't you think?
    Or it will be better for simpler things, or less if I had the ram to 1gig?

    I don't know much on the laptop, and I'm not really willing to spend too much on fixing, if it's just a change of the ram, then it wouldn't cost much for than to upgrade around 1gig.

    Hello

    First of all, I must say that this notebook belongs to an older series laptop.
    It was equipped with the 1.8 Celeron CPU, 256 MB RAM, 20 GB or 30 GB HARD drive and a 16MB graphics card internal.

    What you can do is upgrade the RAM up to 1 GB (2 x 512 MB) and the HARD drive. But I think that the maximum size of HARD drive that would be recognized by the BIOS is 120 GB.
    I think that the laptop supports one IDE controller and it limited because of the 28-bit LBA HARD drive size.

    So finally, it is important to mention that you can not pass the graphics card because it s soldered onto the motherboard. Upgrading the CPU is not possible or very difficult.

    I come to the conclusion that you will not be able to play games of new generation on this machine. The hardware specs are maybe too low a few simple games would run on this laptop but I'm sure that other newer games will not run smoothly.

    Welcome them

  • Problem with the Satellite Pro 2100 and new modules of RAM

    Hello

    I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
    My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
    Here is the code of the modules:
    KTT3614/256 (original)
    KVR266X64SC25/256
    256 MB pc2100 both.
    Starting the PC with any of them, as well as the modules are both compatible.

    Any ideas?
    (Sorry for my English but I'm Italian: D)

    Post edited by: DaK_TaLeS

    Hello

    the second location of memory perhaps is the problem.
    Try to start with a module in the second slot, first an empty slot.

    Good bye

  • Satellite Pro 2100: How do I order the recovery CD

    Hi all...

    I tried to use the search function to find the answer to this, but so far, I've been unable to.
    I just had my laptop Toshiba Satellite Pro 2100 old friends, but the HARD drive is full of stuff I would never like games and old family photos that he told me to just delete.

    Unfortunately he hasn't his recovery disk and I tried to enter the serial number in the disk drive service replacing and he says he's too old...

    Anyone know where I can get one from?

    Hello

    Hmm... the Satellite Pro 2100 is the old series of laptop and I doubt it could be possible to order the CD from recovery for this unit. But to achieve this, I recommend contacting the local Toshiba ASP for some details.

    Another possibility to install the O on this old could be the use of the original CD of Microsoft Windows. After the installation of the own XP operating system you could visit the page of European disc of Toshiba and could download the necessary drivers.

    You can find the drivers in the ARCHHIVE region.

    Check it out

  • Satellite Pro 2100: is it possible to upgrade memory 1 GB?

    Hi sat 2100 and looking at 1 GB but laptop reconises only 512 meg and wont work at all with 2 x 512.
    Would be a bios update help?

    Thank you
    Steve

    Hello

    According to this site about Satellite Pro 2100 memory, the laptop supports 512 MB max.
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7444&ft=m&St=3

    It is the maximum value that can be used in the notebook.
    The BIOS will not help because it is a hardware limitation of motherboard!

  • Satellite Pro 2100 is really really slow running

    I have a satellite pro 2100 I killed a friend.
    He said his brother gave him and that he had no idea what was wrong because he didn't have a chance to watch it.

    I put windows xp pro top and used the bottom of the laptop pro license key.

    but the laptop is really really slow.
    It may take up to 5 minutes for nothing I click to open up.

    the strange thing is the laptop works fine in safe mode, can open things like I should.

    but in normal windows mode, it slows down to a crawl and even crashes.

    I have trie all to my knowledge.
    I even uninstalled and turn off the graphics drive that I thought that he maybe, but he always does.

    I tried multiple copies different from xp pro and even tried a copy of vista, but still the same.

    He had 2 different lots of tried in ram, 2 sticks was new aswel. I tried 3 different hard drives and still the same.

    My thoughts are that the integrated graphics card is exhausted.

    can anyone else confirm this? Certainly this isn't a software issue because I tried a few different copies of xp and vista. IM about to bin it now.

    > anyone can confirm this?
    Don t think someone could confirm everything that is related to a malfunction of the equipment.
    Here in the forum, we can talk about problems and makers of disorders, but no one will be able to say with certainty what's going wrong here.

    First laptop computer is an oldie.
    The Mobile Intel Pentium 4 CPU, isn t a up to date CPU and in my opinion, that don't expect too much performance.

    I put t know how this camera supports memory but everything below 1 GB of Ram would be good enough to the smooth running of the laptop.

    However, given that the unit works much faster saving mode, I guess there must be a hardware related problem.

  • Satellite Pro 2100: TEAC CD drive problem - cannot access CDs

    Hey

    I got my Satellite Pro 2100 for another few years.
    So far it has worked well.
    However, now the cd player is always displayed the yellow light just after trying to load a cd, followed a quiet thump. This means that I can not access the content of the cd (audio or data).

    The drive is still recognized by Device Manager, and I'm told it works well - I know better however, it most certainly isn't! the drive will still appear in my computer, and I can always try and discover the contents of the cd inserted, which is always empty!

    Ant help or advice would be most appreciated, because I really want to re-preparation of the system!

    Hi Simon

    The satellite Pro 2100 is an oldie ;) and I guess that you pointed out the CD/DVD drive all the time long.
    I would not be surprised if this player is dead. For me, it looks like the end of the device.

    Until it must be said that I'm afraid you need to replace the CD/DVD drive with a new m.

    Best regards

  • Need new driver NVIDIA for my Satellite Pro 2100

    Hello

    Anyone know if there is a newer version of the NVIDIA graphics driver that comes with the satellite pro 2100? I looked on the Toshiba downloads section and on the NVIDIA site, I have not had any look to find everything. They simply stopped updating this driver?

    Any help will be thank you very much and I do a search before posting, but haven't found anything.

    Thank you

    Hello Steve

    Satellite Pro 2100 is fairly old unit. It is about 6 years old. Graphics card is NVidia GeForce4 420Go with 16 MB of memory only. Now the question: do you really want that Toshiba should support unit of 6 years with the latest NVIDIA driver? Please don't be crazy on me, but I really don't understand what you expect.

    A more interesting question to me is: for what purpose you need new driver? You want to use with newer games, or maybe you some graphic problems watching movies DSVD?

  • Satellite Pro 2100 - upgrade - upgrade memory RAM

    Hello together!

    For your information:

    Upgrade memory today to 2 Toshiba Satellite Pro 2100 (1.9 GH, 256 MB DDR - RAM initially), both up to 1 GB, all fine and no problems.

    Wanted to just end rumors "only 512 MB all together" or even less.

    If you are looking for, don't forget to think of the specifications:

    DDR-266 (PC2100)
    DDR-SDRAM, SO-DIMM
    200 PINS
    2.5 CL

    concerning the frequency of the RAM, building shape etc.

    Greetings

    L0nestar

    P.S.: Don't think that a debate is necessary, thread could be closed...

    According to the specifications of the computer laptop Satellite Pro has two memory slots and can be upgraded up to 1 GB. It is very useful to have confirmation on the RAM upgrade for this model of laptop old but still good.

    Good day.

Maybe you are looking for

  • How can I get the file NOT menu to display in the title bar?

    For Firefox I know I can go in: config and set "browser.draw.tabs.defaultDrawInTitlebar" and "browser.draw.tabs.DrawInTitlebar", false, but I have no idea on Thunderbird because I don't know how to access to the about: config page, or if it still exi

  • How to maximize autonomy?

    I read a lot of posts on the internet who said that to maximize your battery life, when you use your laptop at home you must remove the battery completely and use only AC power. Now... I have one question: what should I do? What is the best tactic?

  • HP Pavilion 15ab253cl: Photoshop button shortcut

    Photoshop shortcut key combination Ctrl + Shilft + Alt + L (auto contrast) opens the diagnosis 'touch screen '.Very annoying.Right click on the taskbar icon tasks does not offer the possibility to "close all windows".

  • Printer HP C309g won't copy/print. Blank page only.

    My HP C309g printer does not print copy or not.  I only get blank pages.

  • computer guard lock

    computer guard lock up when im online... internet connection is good... How do I know if somethng runs on my internet... where to start to check things... and don't download technical please