Satellite Pro 4200: PCI multimedia audio device

Similar Questions

• Satellite Pro 4200: cannot install graphics drivers correct Win ME

  Hello

  I have just reinstalled Windows ME on Satellite Pro 4200 machines, but I don't seem to be able to install the correct graphics/display drivers. Can anyone help

  Thank you
  Steve

  Post edited by: skc1959

  Hello

  What graphics card was installed in this oldie?

  I don t think that Toshiba provides Win ME drivers for this device, and so you should Google in the internet for the graphics driver.

  Good luck

• Versions of BIOS and upgrades for Satellite Pro 4200

  Hello

  I have search on the Toshiba site, but is no reference to the BIOS information for Satellite Pro 4200 systems (or one of the machines non - letters). can someone point me to where I can see if my BIOS is the last (v2.7) and the location on the site Web BIOD'ZYL downloads.

  See you soon,.

  Jon.

  Hello

  BIOS downloads are found here.

  Enter the BIOS settings at first upward and check the version of the BIOS. You should be able to find it.

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• Portege R700 - Win7 - cannot find the driver for USB Multimedia Audio Device

  Are there any Windows 7 drivers for the "USB Multimedia Audio Device" found on a R700 with the Toshiba Hi Speed Port Replicator II (PA3916U-1PRP)?

  In "Devices and printers", there is a device in the section called a + USB Multimedia Audio Device + Unspecified +. Windows 7 can not find the drivers for it. Audio seems to be working through the port replicator.

  The only related issue I've seen is that sometimes, when I press the "eject" button, Windows complains that a device is in use and the ejection is defective. This is very similar to that reported as ' [Undock R700 question P3838 |]» http://forums.Toshiba.com/T5/General-troubleshooting/R700-undock-from-P3838-issue/TD-p/149453].

  In my case Windows tell me an application to use it or the device in use. I strongly suspect the audio device.

  I have not found a solution so eject manually despite the failure or sleep it and then eject manually. I didn't notice the two approaches being necessarily better.

  HI PeterH,

  Just a simple question: do you use the preinstalled version of Windows 7 at Toshiba and you have most unknown devices in Device Manager or just this USB Multimedia Audio device?

• Satellite Pro 4200 recognize RAM only in the B slot

  I have recently got a Satellite Pro 4200 and want to increase the memory up to 320 MB.
  To start I bought a 128 MB module and have found that with a 64 MB module in a slot and the 128 MB in the other system only recognizes the module into the connector B.

  Must the modules in the two slots be the same value for the system to recognize them? i.e. the 128 MB or two 64 MB.
  If this is the case its OK but if it's not I don't want to buy another 128 MB module, if the location is unservicable.

  Thank you
  Billabilla.

  Hello

  Wow Sat Pro 42000 is an oldie I didn t think someone using this mobile in the future, I mean it's a great laptop but the performance he is too weak to be present-days.
  As far as I know the Satellite Pro 4200 was equipped with Mobile Intel Celeron 500 Mhz or with an Intel Pentium III 450 Mhz / 500 Mhz.

  Pentium 450 Mhz CPU equipped units can be improved up to 320 MB. All other units can be upgraded up to 576 MB.

  I think that the 64 MB module should not be removed!
  You must use 64 MB + 128 MB or 256 MB or 512 MB (only for models with 500 Mhz processor).

  Hope this helps you

• Satellite Pro 4200: ACPI BIOS non-compliant system - NTLDR is missing

  Toshiba Satellite Pro 4200 series, ACPI BIOS non-compliant system

  I have an old Toshiba Satellite Pro 4200 series, I tried to install win98 2000 and xp, but it never completes the whole upward, I get these messages;

  ACPI BIOS non-compliant system
  and
  NTLDR is missing

  I have looked for a bios update but can't find one for the 4200, can anyone help?

  Thank you

  Hello

  Have you tried to reinstall the OS using the Toshiba Recovery CD?
  "I found the troubleshooting of Microsoft on the NTLDR is missing ' error message.

  Please check this:
  http://support.Microsoft.com/kb/318728

• The maximum size of HARD drive the BIOS sees in Satellite Pro 4200 and 4300 series systems

  I want to switch the HARD disk in my Satellite Pro 4340. I know the 4200 and 4300 SP series can take at least a 20 GB HARD drive that I've already updated a SP4270 and SP4280 drives from 20GB already.

  I did a search on assignments earlier re. Satellite Pro 4200 and computers portable 4300 series as various other contributors of this forum had already asked this question. A respondent suggested that they had installed a 60 GB HARD disk without problem.

  Someone at - it else mounted a big HARD drive (or more even) in these notebooks series 4200 and 4300 and managed to do work OK and had the BIOS to recognize the total size of the HARD drive?

  What is the largest swap HDD that someone did with success on these machines of 4200/4300?

  Unfortunately, you will not be able to find accurate information about it. All you can find are reports from other users. I am really interested about other views.

  By the way: 60 GB HARD drive is not sufficient for you?

• Satellite Pro 4200 and wrong screen resolution

  OK, so I have an old Toshiba Satellite Pro 4200 and I m running windows xp professional on it and I ve been wondering because many programs do not work on it because of the resolution of the screen I want to know if there is a way to change.
  I know usually you access properties etc but when I try to drag, he does not slide remains at 800 x 600.

  So if anyone can help me on what I d really really really appreciate it.

  I'm pretty sure you don't l l install the display driver. It is necessary to use solutions above 800 x 600 screen.

  The drivers, you can download a Toshiba site but don t forget to look in the * Archives * because your laptop is not the most recent:
  http://EU.computers.Toshiba-Europe.com

• Satellite Pro 4200 - annoying click speakers

  Hi all

  I have Satellite Pro 4200 and it works well but has a click on the speakers. It's OK while surfing but on downloaded music there are about 5 quick cycle repeat modes. It does same start-up jingle. Is this an easy useful solution or not?

  I can get back to where I bought it.
  I'm on a dongle 3, but I doubt that it is the cause. It's OK the system in turn.
  I got to the redesign of the dept Board and supposedly they are loaded NT 2000 but yet again wrong than ever.

  Thank you

  Satellite Pro 4200 is old enough for laptop and I imagine that the speakers are defective. I think just replace can help.
  Check eBay. You will find parts cheap for these old books. If you have someone to swap the speakers will be the right solution for you. Or simply bring it back.

• Satellite Pro 4200 - need help for Windows 95 & drivers!

  Hello! Years ago my mother, I bought a fully functional, great Toshiba Satellite Pro 4200 working the place taken sales... Since that day, my laptop has not been used. But now, I found a few games nostalgic childhood of mine, who works only with Windows 95. I wanted to play, and I decided to install Windows 95 to my laptop. The installation process went well, it was a bit complicated at first because of the startup disk and such. But I managed to install a working fully Windows 95 in my laptop! But it gives me only 16 colors and no option to choose the resolution! So I found out that I need to install the video card drivers.

  I have google a bit and discovered that my laptop has chart S3 Savage IX. I failed to find the appropriate drivers for it. Until I went to your site to support canada and traveled for a pilot of similar laptops. I found Windows 95-98 compatible drivers for my card. The installation process was easy, is well past and fine! I then could choose 256 colors and another resolution (which I did not actually change...). I changed the colors and then restarted. Everything went well until windows 95 logo screen came suddenly to the top and after that I only saw colors and black borders. He did not start Windows properly. What can be wrong? At I have download the wrong drivers? Windows told me 2 different versions, IX and MX. I tried them both. Tried to change the Hz also, but nothing helped. Please help me!

  Thanks in advance,
  Jupstejuho of Finland.

  P.S Sorry for my bad English...

  Edit: OH, BTW is the exact version of my OS: Microsoft Windows 95 Finnish b with USB support (I Don t know the version very very accurate actually... but I just mention that it is version B of the operating system.) Could this be the problem? I also tried the same driver downloaded from toshiba europe Web site, but it won't let me just install the drivers 'already installed' and they really are. I did not uninstall them, I tried to run the uninstall utility, but it doesn't work...!

  Post edited by: jupstejuho

  Hello!

  Maybe chose a resolution not supported?
  This happens to you at all resolutions, or only one?

  Normally, you can download all the drivers on the European site of Toshiba, but I only find Satellite Pro 4220, 4240 and so far but not 4200.

  However, have you tried to do a BIOS update?
  Before installing the graphics driver, you need to update the version of DirectX.
  You can find the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

  Good bye

• RAM upgeade to Satellite Pro 4200

  Can anyone confirm which is the size of the ram max and slot configuration for my sat pro 4200 please? Currently there 196 016 KB and I want to increase. Some sites show it has 320 KB max e.a. 576 KB.

  Thank you

  Gardenswing

  Hello

  I didn t find info on Satellite Pro 4200, but I know with certainty that Satellite Pro 4220 can scale up to 320 MB max. The two laptops are identical, and I think that this info is also valid for your laptop.

  Module 128 MB compatible a part PA3005U - 1 M 12 number.

  Good bye

• What is the difference between the Satellite Pro 4200 and 4300 series?

  As mentioned in another thread, I have a SP4220XCDT that died on me.

  I bought a mobo on ebay which was a 4290 and today it happened, but the problem was that there was an apparently fixed CPU, which stands out much less of the Council than that of the Board of Directors 4220 and therefore does not connect with my 4220 cooling mechanism.

  At least something comes on when I start now, but unfortunately he has passed the Toshiba screen that tells you to press F2 for boot sequence.

  Having also spent money on a new CPU and memory, I don't want it let go and I've seen a motherboard available suitable for a 4320/40/60 - does anyone know if it will agree with the rest of my 4220? It doesn't have a cpu so presumably will have the same mechanism as the motherboard 4220.

  I'm assuming that these may be compatible since I managed to find a pdf of a service manual that covers both the 4200 and 4300, although unfortunately the first page is missing, so I don't ' know if that highlights any differences.

  It's frustrating that there's no PDF for these older models, at least with the plug on them, and it is very difficult to find info.

  As usual, thanks for any help!

  Hello

  As far as I know the two series using the Intel Mobile Pentium III with MMX microprocessor? Technology.

  I discovered these details:

  Satellite 4260 series: Mobile Pentium III 450 MHz
  4270 satellite series: Intel Mobile Celeron 500 MHz
  Satellite 4280 series: Mobile Pentium III 500 MHz

  Satellite 4320 series: Mobile Pentium III 600 MHz with Intel SpeedStep technology
  Satellite 4340 series: Mobile Pentium III 650 MHz with Intel SpeedStep technology

  Portable measures should be also the same. So in my opinion, it should be possible to use the same motherboard for Satellite Pro 4200 and 4300.

• Speed, basic low/Satellite Pro 4200 Series

  According to the computer laptop manual processor is a pentium III E 500 MHz in my computer laptop satellite pro 4200 (operating system: Windows XP Home Edition). Check the speed of scoring with the CPU software - Z it detects only a few 250 MHz base speed! How to increase the speed of 500 MHz base?

  Hello

  If you check the speed of the processor in the intelligence tool, there to the maximum?

• Satellite Pro 4200: need to know what software is running the Cd/DVD burner?

  I recently bought a laptop satellite pro 4200 (new to me) and can't understand what program will run the burner.

  Anone help?

  If I understand correctly you are looking for the application software / who could burn CDs. Am I right?

  Well, I use the Nero burning rom software. It s really great program with different characteristics.