Satellite Pro 4260: How to remove the DVD drive?
I have a 4260 Pro Satellite and it seems that the DVD drive is broken and I want to replace it. I can't figure out how to remove the old.
Does anyone know how? Is there a manual with available how?
This notebook is not know for me but has checked some sites on the net and it seems that the top cover must be removed.
Then lift the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD-ROM of PJ15 card on the system board.
Remove the two screws that fix the Board Connector CD-ROM/DVD-ROM.
Separate the brace connector connector Office CD-ROM/DVD-ROM and CD-ROM/DVD-ROM CD/DVD-ROM drive
Well, I think that it of not easy for a person without experience.
So if you n t know how to do and you have without much experience you should ask someone how knows what to do ;)
Can anyone give me some advice here please. I am trying to remove the DVD drive existing my A10. I removed the screws of restraint, but the Player cannot slide out. I checked for other screws but have found nothing.
Any help or advice would be greatly appreciated.
As far that know that a single screw fix the drive.
Turn the face of the computer down and remove the two screws fixing the CD-ROM
Turn on the computer to face and open the display. Press towards the Group of CD-ROM drive and disconnect all of CD-ROM drive in the PJ1800 on the system board. Remove the two screws which support CD-ROM of the entire disc CD-ROM. Remove fixing two screws fixing the support side and remove the lateral support.
All that s
I have a L100 which has been "sprayed"... don't ask...
How to remove the keyboard... ideas please
see you soon
The keyboard replacement procedure is almost on all Toshiba laptops. At, first of all it must remove the cover above the keyboard (where the buttons are placed).
After doing this to remove the keyboard is very easy.
BTW: is your laptop under warranty? Please be careful about this.
I would like to remove the internal hard disk of 60 GB of my satellite P10 804 and replace it with a bigger drive, but cannot find a way to enter in the case of removing the HARD drive.
Does anyone have the details on how to do?
To my knowledge, the HARD drive must be placed under the optical dirve.
To remove the HARD drive, first remove the battery and the optical drive, and then follow the steps below:
1. remove the four black screws that anchor the shield of aluminum covering the HARD drive and pull it out.
2. gently pull on the HARD drive the front panel of the computer to disconnect the system board, then pull it out.
3. remove the four silver screws that attach the HARD drive to the HARD disk case.
But be careful. If you have no experience ask someone with more experience in these replacements.
I try to replace the DVD drive on this laptop and removed the setscrews on the base, but he didn't budge.
There is another screw somewhere? I know that some have their screws under the keyboard, but that would need more than one? I also have a Satellite 350 and I took it easily by removing the screws located at the base.
Any help would be appreciated
Please, check here
It can help you
I put a small DVD into the slot for DVDs.
Currently the work of trifles: the dvd is lost into the slot, it can not be read and cannot be deleted.
IST is possible to easily remove the whole out the small dvd dvd player?
I hope someone is able to help me!
What Satellite you do you have?
I work for a school and we have a bunch of laptops Satellite Pro L10. I put a supervisor on all laptops password think this problem would be solved (I didn't enter a password each time the machines are enabled), but one of our students seems to have found its way to the HWSetup utility in Control Panel and could save a user password on one of the laptops.
Alarmingly there seems to be no way to clear the password of the user, even though I have the supervisor password. I can get the BIOS as a supervisor, but the definition of a user password option is grayed out. Can anyone provide a solution for my problem?
Well, I think that this problem could be solved by updating the BIOS to the version 2.60 or greater.
But the problem is that the password has already been fixed.
I read in the paper of Toshiba that all passwords must be removed before starting the BIOS updates.
That's why I think it would be advisable to contact Toshiba service partner to remove first the user password, and then update the BIOS.
You know it's very risky to update the BIOS of the device when the user or any password has been set.
It of possible that the BIOS update procedure will be interrupted if the password exists.
My satellite u400-22z came with a big "hdd recovery" folder on the drive hard - yes I know what it does.
but the unbearably awful version of windows vista that came with the machine made me decide that, in the event of failure of the system, I'm still will not install this failure of the attempt of an operating system.
So I do not have these data recovery.
So those ~ 11 GB of junk sitting on my drive is bugging me, I can't delete the folder HDDRecovery, it is somehow protected against deletion.
How can I work around that?
Also, is it safe or can I make it safe, to use the small apparently hidden partition (that's recovery also?) I found, which is IIRC ~ 2 GB or larger, for own purposes, without destroying my current installation of windows?
Thanks in advance,
If you have a recovery disk and you do not want to store the folder in hard drive hard disk recovery, you can remove it.
> I can't remove the folder HDDRecovery, it is somehow protected against deletion.
Remove you it as you always do to remove all files on your system.
Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
in this case it would be interesting what Type of laptop it is exactly.
You will find this model on the bottom of your laptop. There is a review of it.
Some models have a Bios update available, others not, for example.
Please send additional information!
Could someone give me instructions how to replace the DVD drive?
I unscrewed a few screws in back and two under keyboard and I still can't get out.
Select this option.
I found it!
It's the single screw! It is under the flap of the memory.
Hi, new here...
Can someone tell me how to remove the hard drive in my Tosh A30...
The hard drive on your SA30 is in the optical drive, but slide the optical drive out of its housing (undo the F5 marked screws on the bottom of the laptop).
The hard drive will be visible fixed with four Phillips head screws that need to be removed (two on each side of the hard drive. With the removed screws, gently slide the hard drive toward the front of the laptop to disconnect its connector and carefully pull it out of its Bay.
Can anyone tell please how to remove the hard drive of the computer laptop Pavilion ze5730us? I know its under the keyboard somehow, but I don't know how or where that open. I could not find this model on YouTube either.
Thanks in advance for your help.
The only manual that I could find is one that covers the ze5600.
See if it will work for your model too.
How to remove the printer driver under windows Vista
Add or remove a printer
Solve printer problems
If you have an error spooler or service use these methods to make them disappear including having to re - install
the same printer if you intend to remove it.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).
Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
Solve printer problems - a Mr Fixit
Logon as administrator
Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
If you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
How difficulty Windows Vista print spooler starts do not
Check this thread if necessary - to stop and erase the spooler
Clean the General corruption and repair or replace the damaged/missing files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Can someone tell me how to remove the hard drive of a 1444dx dv4 notebook? My laptop does not pass enven boot in safe mode. I tried to let repair system automatic and also tried recovery to a date when the latter worked correctly, but neither translates into success.
I want to remove the hard drive and save my data before trying to reinstall the original image from the D: drive.
Thanks for any help you can provide.
The procedure to replace the hard drive is detailed from Page 59 of your & Maintenance Guide.
DP - K
my laptop (* Toshiba L300D 242 *) DVD ROM has been damaged and I have acquired a new and now I can not figure out how to remove my old DVD ROM and replace it with a new one... Please help me understand how to remove the old and replace it with a new one...
E-mail: [[email protected]]
Agree with Feliks the ODD is secured by a screw hidden in the HARD drive Bay.
So the HARD drive Bay cover must be removed to access this screw procedure is not really difficult, so you should be able to remove it easily.
Maybe you are looking for
I had some problems with some sites saying that my browser has been "not supported" or "not recognized" or "must be upgraded. Al; so I was getting strange behavior when I used my iGoogle homepage or the search functions of Google. I UPGRADED to 9.01
Lexmark All in one work account admin but not limited account. I get an error exe AIO. If I change to an admin account, it works, but switching back on limited account, it does not work. I even created a new account to test - the same results. He
Media player cd play starts then stops and says drive cannot read the cd with the C00D0FAB error code
Not of themselves if're 1 problema en TR, o el movil're asi, cuando lo tengo blocked (pantalla en negro) y hay luz in the habitación al mover the pantalla is ve como unas rayas y puntos blancos? Creo simplemente el Panel are, pero no se TR are normal
Hi guys,.I want to recover contact records from Eloqua 10 using ContactGroupID or by using the SOAP API or RESTFul API in c#. Well want to, help me for the same thing.Thanking you,Kind regardsDhaval Doshi.