Satellite Pro 4360: how to configure sound W2k driver?

Similar Questions

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• Satellite Pro A100: How to get updates for driver for ATI Radeon Mobility X 1400

  Hello

  I am aware that the driver for my on-board graphics card is outdated.
  When I download a updated from ATI driver and try to install, it tells me that I can't install the update the system there and contact Toshiba for the updates.

  Please can someone tell how can I get a driver updates for this card on my Satellite Pro A100 series?

  Concerning

  Macca.

  Hello

  You can not install drivers ATI ATI site because these drivers are not designed and certified for Toshiba laptops.
  These drivers can affect the functionality of notebooks and in worst cases could overheat your GPU

  * So if you want to use these drivers, you can do it but only at your own risk! *

  You can install this driver in Device Manager;
  You must use the Advanced installation procedure and you will have to indicate where the graphic driver files were stored on the HARD drive

  Good bye

• Satellite Pro L - how can I update the driver chipset?

  I need to update the graphics driver for my 965 chipset. I downloaded what I thought was a driver out of date on the Toshiba site, but when I went to install, I get an error message indicating that my system does not meet the minimum requirements. If I try to install a driver from Intel site, it tells me to get the driver of my manufacturer...

  All tips (dumbed down please) Nice.

  Thank you

  Hello

  Can you please tell us what Satellite Pro laptop computer you have exactly?

  Normally before update you a driver, you must uninstall the old version first. Reboot the laptop, then I recommend that you install the most recent version.

  By the way: I had a similar that I deliver couldn t install new Intel driver. I solved the problem if I install the manual of the driver through the Device Manager and of the Advanced installation routine. I chose the directory driver myself and it worked! :)

• Satellite Pro A300D - How can I recover HARD drive?

  HI Newbie here.

  Put on the machine this morning and it just says: disk error - press DELETE Cnt, was talking to the guys at PC World and they say to restart, and then press F8 I have heaps of times, but I can't access the drive recovery partition.

  I have a Satellite Pro A300 with Home Prem Vista

  Any help appreciated.

  Thank you

  Paul

  Hello Paul

  Well, are not good news but it shouldn't be a problem to solve this problem.

  You can go into advanced with F8 boot menu? If Yes, select Repair my computer and follow the instructions on the screen. All that s. So, you can use HARD drive recovery.

  If you can t go into the advanced boot menu you should use the Toshiba recovery disc. You burn it? You need to start only with her and Windows will be reinstalled.
  If you don t have the recovery disc, you can order one at Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Satellite Pro A100 - how to configure to gigabit?

  I have an A100 A100/Pro with an Intel PRO/1000PL network card which is supposed to be capable of Gigabit connection. It will only connect to 100 Mbps.
  Change the setting of speed car 1000 disconnects the device.

  How to set up this card to 1000Mbps.

  Hello

  Connection speed Gigabit also depends on your router you have and your network cable. But don t expect a strange performance gain, if you want to copy data from your HARD disk is not fast enough transfer 1 Gbps and no Internet connection are known to me they need to that speed.

  Anyway, your router supports gigabit? If this isn't the case, you can use t gigabit!

• Satellite Pro 4260: How to remove the DVD drive?

  I have a 4260 Pro Satellite and it seems that the DVD drive is broken and I want to replace it. I can't figure out how to remove the old.
  Does anyone know how? Is there a manual with available how?

  Thank you

  Hello

  This notebook is not know for me but has checked some sites on the net and it seems that the top cover must be removed.
  Then lift the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD-ROM of PJ15 card on the system board.
  Remove the two screws that fix the Board Connector CD-ROM/DVD-ROM.
  Separate the brace connector connector Office CD-ROM/DVD-ROM and CD-ROM/DVD-ROM CD/DVD-ROM drive

  Well, I think that it of not easy for a person without experience.
  So if you n t know how to do and you have without much experience you should ask someone how knows what to do ;)

• Satellite Pro A10 - how to remove the optical drive?

  Can anyone give me some advice here please. I am trying to remove the DVD drive existing my A10. I removed the screws of restraint, but the Player cannot slide out. I checked for other screws but have found nothing.
  Any help or advice would be greatly appreciated.

  Hello

  As far that know that a single screw fix the drive.
  Turn the face of the computer down and remove the two screws fixing the CD-ROM
  Drive.
  Turn on the computer to face and open the display. Press towards the Group of CD-ROM drive and disconnect all of CD-ROM drive in the PJ1800 on the system board. Remove the two screws which support CD-ROM of the entire disc CD-ROM. Remove fixing two screws fixing the support side and remove the lateral support.

  All that s

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• Satellite Pro A300 - How can I turn on my webcam?

  Satellite Pro A300 - How can I turn on my webcam? Operating windows 7. The computer is clean.

  Hello

  The webcam can be used with programs like Skype communication where you can make a video call. Of course, there are other messengers or programs they use the webcam.

  But you must install the software/driver webcam that you can use. This software can be downloaded from the official website of Toshiba (Camera Assistant Software):
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Satellite Pro 4360 - SSD boot via Cardbus (PCMCIA) possible?

  Hi all

  I have an old 4360 SP.
  Anyone know if an upgrade of BIOS 2.70 will allow me to boot from SSD inserted into the Cardbus pc card slot?
  Just knowing the Bios will only recognize DVDs, HARD drive and FLOPPY drive as boot devices.

  Second question:
  I have confllicting of info on maximum size of RAM. Some sources state 320 MB max while the manual (online) indicates 576 MB max. Does anyone know if 576Mo is really supported?

  Hello

  Please check that this son:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=82016

  Please note that this upgrade memory depends on the chipset of s for laptop.
  You can check the laptop Satellite Pro 4360 chipset and could search for more details on the Intel page (I guess that he s Intel chipset).

  On starting of SSD;
  I doubt a BIOS update would be allows to boot from external SSD usually this old notebook have been able to boot from the CD, HARD drive, or floppy drive only

• Satellite Pro 4360 Ram upgrades

  Hello, this is my first post

  I have a satellite pro 4360 with 256 meg of ram can be updated at least 512 I have 1 spare ram slot if so, what is the ram details I need IE 144 pins etc.

  Thank you very much

  Hello

  The 4360 Pro Satellite came with 64 MB internal memory and this memory in not removable.
  As you have already said, there is only a slot that is expandable.

  In any case... it seems that it of not possible to upgrade memory up to 512 MB.
  You can upgrade the memory to 320 MB (64 MB internal memory + 256 MB external memory). There is a limit.

  I found a very useful page that confirms this info:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5775&ft=m&St=3

  PS: I forgot to say that the laptop supports the SODIMM 144 pin PC100

  Good bye

• Need drivers and manual for Satellite Pro 4360

  Hello
  power led flashes after passage and the laptop does not start.
  Who knows where to find manual for Satellite Pro 4360?

  and where you can find drivers for windows 2000?

  TX, michtec

  Hello

  Everything you need you can find on the Toshiba download page, but the important thing is to choose the option ARCHIVE under product type.

• Dead by Satellite Pro A120 - no lights or sound

  I get no response from my Satellite Pro A120, no lights or sound. With power cord is plugged in.
  Let run last night and found dead this morning.

  I don't think it's a problem with the actual power cable, however the power supply port on the back is a bit loose and "wiggles" when it is plugged in, did it for a while with no problems.

  Any suggestions?

  It is not easy to say, but I fear that there is problem with PCBS and power connector. Sorry but there is nothing that you can do it alone. If the warranty is still valid please contact the authorized Service partner as soon as possible.

• Satellite Pro L40 - how to make a dual boot with two recovery disks

  A small question;
  How to dual boot with two recovery disks ive got with my laptop (Satellite Pro L40)

  discs 1 & 2 are windows vista buisness
  discs 3 & 4 are windows xp profesional
  Disc 5 is updated the bios

  The guy where I bougt garage computer (a metal regular store named expert) says that it is posible with discs tose.
  I have
  I already have a partition, but when I boot from disks, is not has the option to select a partition

  Thanks already

  > Satellite Pro L40 - how to make a dual boot with two recovery disks?
  Short answer: you can't do that. Maybe if you have two hard disks (I tried didn't) but as much as I know your SP L40 has only one.
  Ask this smart guy, how to do this. Maybe it's a useful tip.