Satellite Pro 440 - how to install the OS?

Similar Questions

• Satellite Pro A300 - how to install the webcam?

  I got my laptop via my uni so did amyn backup discs (especially not the webcam).

  Basically my laptop is a Trojan virus on my webcam, set it and I restarted my computer. It is then flashed up on reboot that I need to install my webcam but I don't have the disk and now I can't use my webcam! What should I do?

  PS I'm not a genius with computers so please be easy on me with the language.

  Hi mate,

  If you need to reinstall the driver for the webcam you can download on the Toshiba site and all drivers for your laptop:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I have too many Satellite Pro A300 and it s not delivered with the Toshiba Recovery disk because you create such a floppy yourself. So start the Toshiba recovery disc creator, which is preinstalled on your laptop and you can create this disk. It contains a picture of the factory settings, and so you can restore the entire system every time.

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• Satellite Pro L300: How to get the sleep settings

  Before you have to play with the Satellite Pro L300 laptop recently (on the instructions of the Tech) when I close the lid of the laptop that he went to sleep BUT when I opened the lid eventually, I had to press the power button to restart the laptop.

  But now, he's just on stand by.
  How can I get this back to how it was (having to press the button to exit stnd - in)-help!

  I tried to turn off Toshiba power saver and using the windows settings but nothing
  I have treid working :(

  Can anyone help?

  I get at the end of my home with this computer laptop blinkin :(

• Satellite L10-209 - how to install the display driver for Windows 7?

  I formatted my * Satellite L10-209 * and * Windows 7 *. All the drivers installed fine but the * video card *: xD

  How to install the display driver (graphics card)?
  Tools & Utilities CD does not work with Win7,

  Hello

  I m wondering that you have installed Windows 7 on this good old classic. In my opinion Windows XP would be the best choice, but ok, you can do what you want ;)

  Anyway, AFAIK your laptop is equipped with an Intel graphics card then I recommend to download the driver form Intel directly because the Web from Toshiba site displays only the Windows XP display drivers.
  http://www.Intel.com

  Check this box!

• Satellite Pro L40 - how to enable the WLan using ConfigFree

  Can you help me?

  My English is bad I do not end.

  The question is:
  My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

  Help please!
  I want to know what's wrong

  Thank you!!

  Hello!

  Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
  Her check first because otherwise, you can get the WLAN to work.

  In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
  Check it!

  After this Free Config should find your WLAN router if you are in the range of that.

  Good bye

• Satellite L655-1FO - how to install the audio driver?

  How to install the audio driver on my l655 1fo? I download the driver of toshiba, but it cannot start. Can someone help me how to install it on Windows XP. Thank you

  Hey,.

  Before starting with the installation of the driver it is important that you install Service Pack 3 for Windows XP, because it contains important updates for cards high definition sound. Otherwise, you are not able to install audio driver.

  Download & install SP3 and then you can start with the driver installation :)

• Satellite Pro A200 - how to activate the new device LAN card?

  Hello.

  I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

  The laptop is running Windows 7 64 bit

  Kind regards.

  Hi evo8.

  What card WLAN have you had before and do the work of a former?
  I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

  By the way: do other FN keys FN + F8 work or simply not?

• Satellite Pro A300: How to create the recovery disk

  Hello
  I just bought a Satellite Pro A300 with Windows XP.
  I want to know how I can or if I need to create a recovery disk that will reset the machine to its original state.
  The information gives instuctions on how to proceed for the Vista machines, but not for XP.

  I know that I can recover from the hidden partition, but where this is not possible, I wish I could get CD or DVD.
  There is a recovery CD included product that says only: "MS Windows XP" so I guess that it does not include drivers or Toshiba Software?

  Any help appreciated,
  Thank you
  Mick

  Hello

  You have preinstalled software Toshiba TOSHIBA Recovery Disc Creator?

  Please check this box.
  Using the TOSHIBA Recovery Disc Creator you can create the recovery disk.

  But if your laptop was already pre-installed with Windows XP and then a Recovery CD or DVD must be included.

  Have you checked all of the items in the box?

• Satellite Pro A300: How to recover the Vista operating system

  My friend has a Toshiba Satellite Pro A300 it has a 4 GB of ram, but on Windows Xp shows only 3 GB
  I also want to put in place the back of the Vista, but I can't not insatall any operating system (only the Toshiba Xp dvd)
  (there is a HDD recovery folder on the C drive, I think it is the Vista that he owned before but a don't know how to install it)

  Ok. If the folder in HARD drive recovery then it should be possible to carry out a procedure for HARD drive recovery, remain on the second partition.

  First of all, start Notepad and press F8 immediately after that the laptop has been powered. Then choose the first option called fix my computer.
  A new window should open, and you should choose the last option called Toshiba HDD Recovery.
  Then follow the instructions on the screen.

  This should usually works if the folder of HARD disk recovery and partition has not changed or deleted.

  Check it out if it does not, you will need to order a Vista of Toshiba Recovery DVD:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Satellite Pro S330 - how to change the supervisor password?

  Hello!

  On a Satellite Pro S330L Windows is broken, so I can't access TOSPU. EXE. If I know the supervisor password, I can't enter the BIOS program. Bootsequence is HDD-..., so I can't boot from DVD! What can I do to install a new OS?

  Thanks for your help! JO

  Hi jonol,.

  If you know the supervisor password, everything is ok. Just so access the BIOS after you turn on the laptop and enter the password. Now you are in which you can change the BIOS boot order, remove the supervisor password, etc..

  Check this box!

• Satellite Pro S300 - how to enter the supervisor password?

  Hello

  I have a laptop Toshiba Satellite Pro S300-11 years and have a problem. One day, I decided that wanted to put a password for the supervisor to the bios of the laptop. Now, I remember this password, but when I have access to the BIOS Setup, I can't watch any o change option disable this password. I can't enter this password to set me a supervisor, and also I can't change some options with respect to the example, the boot sequence.

  How can I remove this password or how do I log in as a supervisor? I see no option for this, and I need to change the boot sequence.

  A big thank you.

  Hello

  On this that I can only say, check your user manual! ;)

  There, I created the following information:
  + C:\Program Files\Toshiba\PassowrdUtility\TOSPU.exe+
  + This utility allows you to do the following: +.
  + Register, remove, or change the supervisor password.
  + Create or cancel a supervisor password token +.

  Check this and then you should be able to remove the password if you know the current.

  Welcome them

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• Satellite Pro A300 - how to access the installation of Vista hidden partition?

  AHOY!

  I have a Satellite Pro A300 PSAGDA 2000R

  It had Windows Vista installed when I got it, but after a while, had to reformat, so I did, (I want to reformat my computer every 6-12 months on average), it came only with XP disks even if he got a serial number for Vista on the underside of the laptop so I installed XP. That was about 2-3 reformats there now.

  However, so that finding drivers I've seen mention of a hidden partition to reinstall Vista (which I hope it is 64-bit) and tried to do this several times but unfortunately it does not work, I guess that maybe what XP installation I can accidentally deleted or something? (Thought they had in fact on some solid state memory which could not be written more or something.)

  * Is there a way I can access it, take another that won't cost a ridiculous amount (for example download) or a nice person enough to create an image to download on a site or something that I can download file sharing? *

  I have also a spare copy of Vista (and a bit of XP) on the drive, none of them will work?

  + Another thing which I am interested in is can I get any of the preview of Windows 8 OS that will run on this laptop? Apparently it improved performance on Vista and W7 would be convenient for running on a laptop, and I have also heard say it is possible to upgrade to the full version of the preview or W7 for a minimal cost and would probably be much cheaper than other methods if possible. +

  And I'm actually quite handy with computers, so don't be afraid to throw big words at me,

  (Tried the methods found on the manual on page 3-8 ([link: http://www.mytoshiba.com.au/support/computers/satellite/pro/a300/psagda-02000r/download?os=22]).)

  I have European A300 and I believe that the principle on the rest of the same models.
  A300 was offered with Vista preinstalled but without recovery disc Vista. Image that contains the operating system, drivers, tools and utilities for recovery has been saved on the HARD drive and with book factory owner was able to begin the installation of HARD drive recovery. It works with the factory only settings.

  With preinstalled Toshiba laptop recovery disk creator owners have been able to create the recovery disk that can be used if the disk HARD recovery doesn't work anymore.
  If you don t have access to this image saved on HARD drive recovery, you must use the recovery disc. If you don t have the disc that you have a problem. Recovery image can not be downloaded. All you can download are the unique rivers, tools and utilities that you can use if you install a clean version of the OS (operating system).
  On the European models, recovery image was recorded on the second partition of HARD drive in the folder called HDDrecovery.

  Anyway, A300 works with Win7 32 bit. I installed it on my machine and I m very happy with it.
  > Another thing which I am interested in is can I get any of the preview of Windows 8 OS that will run on this laptop?
  I put t know who should give you this overview, but the fact is that you get it from Toshiba. You should check if you can get it in another way.