Satellite Pro 440cdx - how can I change the brightness or contrast

My screen is weak and hard to see objects on the screen, any advice will be more welcome.many thanks for any help.

Hello

The brightness of the display can be changed by pressing the FN or FN + F6, F7 key combination.
The contrast could not be changed on the screens of laptops that it is set automatically.

But if it of very difficult to see anything on the screen, then an FL inverter may default.
The fl inverter is a small part that controls the brightness of the display.
Maybe it s need to be replaced.

Tags: Toshiba

Similar Questions

  • Satellite Pro A40: How can I change the video ram

    Hi I have an A40 my Ram video machine is set to 16 MB maximum is 64 MB
    How can I change my 64 MB
    I tried the bios theres nothing in there that will change, I have the latest version of the bios of the machine V1.50

    what someone of nowhere leaving to do this please

    Jay

    Hello

    As much as I know the of A40 Satellite Pro supports the Intel 852GME shared memory graphic card.
    S control Intel cards automatically memory allocation.

    This means that if the graphic card must more 16 MB of memory, the graphics driver will share the part of main memory!
    The whole process runs automatically and you do not need to change anything!

  • Satellite Pro A10 - How can I change the start property?

    Hello

    How can I chance the A10 coastal boot?
    With ESC, I can access the BIOS, but I can't chance anything except the time.

    Thank you
    Tobias

    Hello!

    I think you should check the BIOS again because as far as I know, there you can change the boot priority.
    In addition, you should find more options in the BIOS as only the Date and time.

    Check it!

    Good bye

  • Satellite Pro L20 - How can I change the optical drive?

    I want to change the optical drive in a satellite pro L20 but I'm having trouble finding instructions on how to remove it. Can anyone help?

    The CURIOUS reader is fixed with a screw at the bottom of the unit. Then, turn the computer over and remove one screw an optical disk drive.
    The second screw is hidden under the keyboard. That's why this screw must be removed also. And then disconnect you should be able to pull-out of the optical drive.

    But note; If you have no experience of these things, ask a technician for laptop computer to help him.

    Good luck

  • Satellite Pro A300 - How can I change the size of the partition?

    Hello
    My Satellite Pro A300 came with 2 different partitions, and I would like to change the size of the partitions (the data partition is too small).

    Which would affect the recovery tools? Is there proposed formulas?

    Thanks in advance,

    Andres

    What operating system do you use on your laptop?
    If you use Vista, this document could be useful for you:
    http://195.182.196.33/KB0/TSB7101OB0006R01.htm

    This should normally does not affect the recovery of HARD drive but make sure to burn the disc of recovery if you didn t it yet.

    If you have the recovery disk, you are on the safe side.

  • How can I change the brightness of the mc property?

    How can I change the brightness of the movieClip property using action script?

    Hello

    This will help you http://www.actionscript.org/forums/showthread.php3?t=136275

  • How can I adjust the brightness and contrast of an object that is part of a vector?

    I have edited one (text & symbols of color, brightness, contrast, etc.) file, generated from its original file, LOGO.eps LOGO.tif, . Now, I am trying to edit the EPS to match the TIFF. I got regarding the extraction of the color of the text in the TIFF file and applying it to the text in the EPS file. My problem is that I can not change the brightness and contrast of the symbol in the logo. Is it possible to adjust the brightness and contrast of an object that is part of a vector? I need make a darker symbol and I tried change > change colors > saturate and adjusting the intensity to 100, but it does not darken. And I can't really spend extra money on plug-ins like Phantasm cs. Help, please.

    I may be as simple as adding a transparent overlay with some gradients.

    It can be incredibly complex and be better done in photoshop.

    without seeing it, it is very difficult to help more.

    even a clipped sample can help.

    Choose the logo...

    (comment out) What is the point of a Logo, no one is allowed to see?

  • Satellite P300D-220: How can I change the Toshiba Multimedia Buttos config

    Hello

    How can I change the options for the buttons to support key Toshiba?

    I want to change the button to 'cut the computer', in 'turn led light on or off.
    Toshiba Button support shows only two possibilities: CD/DVD and in German "Your aus" what means "mute".

    What it means?

    In Vista was the button with the right option, now I have installed Windows 7 Ultimate x 86. Since then the mute only it.

    I hope you understand my question.

    http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=125277
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=34487

    This two threads did not help me, because I find no "utility control" in the list of the drivers for my computer.

    Hello

    Win 7 is different!
    The configuration of keys on Toshiba utility is not available for Win 7!
    After the installation of the VAP (value added package) for Win 7, you can configure the keys by pressing the button for the first time.

    I did it on my laptop after changing from Vista to Windows 7.
    I pressed a button and the window a pop-up asking me which application should be attributed to this button.

    As far as I know after the configuration it of not possible to change this once again

    Maybe after the new TPC facility you could configure the new buttons

  • Satellite Pro U400 - How can I get the native screen resolution for external monitor?

    I have a samsung syncmaster external screen connected to a Satellite Pro U400.

    The resolution of the screen goes up to 1280 etc. but the minimum samsung is 1440 x 920 (ish I forgot).
    How can I get the samsung to display full screen expanded to save my eyes of the realativively small screen internal?

    Hello!

    Have you tried to update the display on your laptop driver? Check the Toshiba site for an update:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
    And what operating system are you using? Have you installed all Windows updates?

    For external LCD, monitors, you must set the screen refresh rate of 60 Hz.
    And if you want to change the resolution of the screen, you must select the second monitor in the graphics options on Windows.

    Good bye

  • Re: Satellite Pro L300 - how can I reset the BIOS password?

    I put the password on the BIOS and electric start and I forgot the password.
    How can I reset the password?

    I have a Toshiba Satellite Pro L300.

    You must bring the laptop to an authorized service center to remove the password.

    Which country are you? Check your local Toshiba Web site for a list of the ASP (service centres).

  • Satellite Pro 6000 - how can I update the BIOS?

    Hi all

    I have the problem that my laptop does not start 9 of 10 times with the message: * block 1 BIOS is damaged, call your service man.

    I want to update BIOS but for the Satellite Pro 6000 I can only find an update the BIOS from Windows. But my laptop does not start! Rarely the machine starts, but when I try to update the BIOS, I get the message that I already have the latest version of the BIOS

    My questions:
    * Is there a BIOS update file that is a BIOS floppy? (for example the Satellite Pro 6100 has 2 BIOS files, 1 Windows and 1 making a floppy disk)
    * Is it possible to update the BIOS with the same version of Windows?

    Or perhaps there is another solution for this problem? Has no need to update my BIOS?

    Thank you.

    Hans

    Hello

    I agree with Luke.
    The rom Bios module seems to be damage.
    Either it must be replaced or flashed again.

    But you won't be able to do that! The update of the Bios on the Toshiba page focuses on winning and you will not be able to update if the windows are not running.

    You last chance is an ASP that could check the BIOS ROM.
    As I said, most high, maybe new reflash module Rom help but cela can be answered simply by an ASP technician who checked this.

  • Satellite A210-171 - how can I change the contrast and brightness?

    I have myself in a bit of a mess here!
    I am a digital artist and because I had trouble with my colors of the laptop to the printer I have advised me of many artist to buy a color calibrator.

    My software has come today, but I was not able to do anything with it yet because it asks me to put my * contrast and brightness to 50% maximum setting * and I can't find where it is?

    I have a satellite A210-171 - please someone help me
    I'm desperate!

    Hello!

    The brightness and contrast, you can change in display properties.
    Check it!

    In addition, you can change the brightness of the screen using FN + F6 and FN + F7.

    Good bye

  • Adobe Pro DC - How can I change the name of the speaker on the document?

    Here are two users dilemma - an Adobe account - in the same office. How we use Adobe Pro DC for editing documents for clients, but without a name of main account to appear as the author of the comments?

    How do I change the name of the author for the time where it is needed? Please give us the way to add the user and Installer.

    Thank you

    PAM

    Found the answer...

    Change name intervening on a document... go to preference > commenting > looking for ' comments ' on the right, the list and uncheck "user name always use as the name of the author.

    Tah - Dah! Easy lemon squeezy Prost!

  • How can I change the brightness on my o f my Inspiron one screen?

    My Inspiron screen is SO bright.  I can not find the command to change the brightness.  Anyone know how?

    Hello Connie Mich

    Check out the link to the community Dell below it are has some suggestions that have worked for others. I hope this helps.

    http://en.community.Dell.com/support-forums/desktop/f/3515/t/19358673.aspx

  • How can I change the brightness of the screen without using the fn key?

    I want to know how to increase the brightness of the screen using the parameters of the computer, not a keyboard.

    Thank you

    Hello

    1. What is the brand and model of your computer?

    2. is it a laptop or desktop?

    I suggest to read the following steps and check if it helps.

    a. Click Start, click Control Panel.

    b. Select "Appearance and themes" when prompted in the Panel 'category view. " If you are in "Classic Mode", choose the "View" icon

    c. Select the 'Settings' tab in the display properties window.

    d. Select the button "Advanced" at the bottom of the window. This will take you to the properties of your screen.

    e. click on the tab "colors".

    f. Select the brightness scale and push or pull until you are satisfied with the brightness of your screen.

    g. Press 'OK' to adjust the brightness of your.

    More information consult:

    Adjust the brightness and contrast of your monitor: http://windows.microsoft.com/en-US/windows-vista/Adjust-your-monitors-brightness-and-contrast
    Note: There is for Windows XP as well.

Maybe you are looking for