Satellite Pro 4600: sometimes applications stop running with the new RAM

Similar Questions

• Is it possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Problem - one of my clients recently tested my new LabVIEW application and asked how the arrested LabVIEW application can be restarted without clicking on the "Run" (right arrow) button.

  Is possible solution - possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Thank you!

  Barry

  The big problem is in your Acquistion to stop audio event. You run the LabVIEW stop sign which is the equivalent of hitting the Cancel button in the toolbar.  (See contextual help on that).  You can stop the acquisition, but you don't want to stop your LabVIEW program.  You need this case in the event your computer to transition state in a sleep mode when you do not make any purchase.  Then hit the purchase button to start again transitions the machine state in the acquisition.

  In your case of program output, you want really to leave LabVIEW it.  You want to run and stop commands like closing the com port and one of these activeX references.  Then allow it to stop the while loop.  Turn the LabVIEW out outside the loop so that once everything is cleaned, your application may close.  You probably want to wrap this command in a case structure so that if you are in the execution environment, it leaves your application.  But if you are in the development environment, you don't want to cause your LabVIEW environment stop.  Another thing is that right now, you actually have a race condition in the Exit event.  The com port will close first or LabVIEW will come out.  There is no defined order of execution.

  Alternatively, you can have an event to close panel? in this way, you haven't accidentally short circuit all your program by pressing the X key.  You want to capture this event, discard it.  And if you want to not actually closed, did trigger the Exit Program button so that you can gracefully shutdown.

• What can I do to make the Satellite A665-S6086 run with the new memory?

  I was able to update the BIOS for my Satellite A665-S6086 by updating 2.30 on CD burning. I have Windows 7 64 bit. I needed to update the BIOS, because I upgraded my RAM/memory of 2 GB (4 GB total) two cards two cards of 4 GB (8 GB total).

  My question now is when I start my computer with the new RAM/memory (two cards that are KTT-S3BS / 4G Kingston DDR3 1333 MHZ SODIMM SGL RANK), it freezes on the screen from Windows startup. Then when I hold the power button to shut it down and restart it, it wants to start using Windows repair but then crashes again. When I put in the memory of the old man and he start up, it starts the Windows repair and runs normally.

  What can I do to make my computer run with the new memory?

  I thank very you much in advance!

  What you can do?
  Buy an another RAM modules that are fully compatible with the laptop.
  It seems that you want to use the RAM modules which are not totally compatible and therefore the system hangs.

  By the way: the CPU that is used in this notebook runs the DDR3-800 and DDR3-1066
  RAM modules.
  http://Ark.Intel.com/products/49020

  I would not recommend to use the modules of DDR3-1333 but PA3677U-1M4G 4 GB DDR3-1066

• Satellite Pro 4600: How to reset or remove the BIOS password

  Hello

  I forgot the password to my Satellite Pro 4600 BIOS.

  How can [1] I reset the password?

  [2] can update BIOS floppy be helpful for bios reset?

  [3] otherwise, you know another method?

  Kind regards
  Aloni.

  Hello

  1.) it of not possible to remove the BIOS password yourself.
  If you forgot the password of the BIOS, then contact Toshiba service partner in your country to remove the password.

  2.) each laptop has a BIOS procedure. You should check the Toshiba FAQ - How can I update the BIOS-
  Please check this Toshiba support page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=Direct_Support_e u

  But if the BIOS password you can not pass the BIOS. The password of the BIOS must be removed for updating the BIOS.

  3.) see FAQ

• Satellite Pro P300-19 q - cannot start with a new memory

  So, I want to add 2 GB of RAM to 2 GB existing. I use Windows 7 64-bit. In the BIOS, I see 4 GB of memory, but windows won't start.

  When removing the old memory and leaving the new, the computer isn't even strats. Some info:
  Old memory - Samsung M4 70T5663QZ3-CF7 2 GB DDR2 - 800 DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz)
  New memory - Spectek DDR2 2 GB PC6400 800 MHz 200 pin

  So, what's the problem? And what can I do?
  Thank you

  Hello

  Theoretically, it should be possible to use 4 GB in this notebook.

  The new RAM is the manufacturing of Spectek. This production does not for me. For me, looks not dear noname module.

  I always use Kingston modules to upgrade my laptop. I've never had any problems with these modules, so you should try it to.
  I think that the new module isn't compatible with your laptop.

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• Satellite L655-149: recovery does not work with the new HARD drive

  Satellite L655-149

  PSK1JE

  Windows 7 Home Premium 64-bit (factory installed)

  Recovery of HARD drive on drive D (factory installed)

  My old toshiba (MK5065GSX) 500 GB hard drive became too noisy and slow so I plan to replace it with the new drive hard toshiba (MK5059GSXP) 500 GB.

  I created USB Flash HARD drive recovery.
  When the installation is complete and Setup installs devices an error "Windows Setup couldn't configure windows to run on a hardware on this computer.

  I've updated the bios
  I loaded by default in the bios
  I changed the SATA AHCI mode to compatibility IDLE

  assistance in this regard will be highly appreciated

  Set the BIOS to the default settings and try again.

  With the installation of recovery, there is a problem: either it works or not. If this isn't the case, bad luck and the only solution for you is to order original Toshiba recovery DVD on https://backupmedia.toshiba.eu/landing.aspx

  By the way: do you use that stick of recovery for the first time?

• Satellite Pro 4600 wireless error AP wep with intel

  I have 3 laptops Satalite Pro 4600 with wireless.
  I have work ok with AP intel. But change company wen encriptación never use WEP wireless network working again. His tent to get an ip but noting. In windows xp with or not sp2, I see the AP. But unable to connect.
  Can someone help me? Thank you

  Bonjourno,
  Under WEP Wired Equivalent Privacy.

  In fact, you need encryption of your company information (like for example SSID) or the wireless network administrator.
  If you don't have it information, you can not connect to their access Point.

• Satellite Pro P200 - 1KE Vista loses contact with the second internal HARD drive

  Vista Business SP2. I have a Satellite Pro P200-1KE, with two 160 GB drives: a Hitachi configured as C: (operating system, programs, etc.) and E: (data, other programs). The second is a Toshiba MK1637GSX. This little about it and nothing of any importance and is normally configured as d. Unfortunately this hard drive has now become invisible to Vista, although it is still recognized by BIOS and Device Manager. In managing computer does not appear in the list in the upper pane, it comes without a letter from reader below. I have tried everything I know to get recognized, including the following:
  (In no particular order):

  * Remove computer - managed, reset as a single Volume: it always fails
  * Reformat to NTFS using Linux GParted or utility disk Linux (via a USB stick with Linux ice Peppermint on that nerd), sometimes combined with the restoration of the system - it works, but only for a single session. She always disappears again when you restart
  * Remove the driver from Device Manager and pointing plug-and-play with Windows System 32 and Windows Update - which seems to return the driver - but does not recognized disk, unfortunately
  * Meanwhile, throughout all this, Vista insists on finding a driver for "unknown device" that she sometimes found and (allegedly) installs and sometimes find one fails to install.

  Bah!

  Anyone know anything else I can try - preferably without having to reinstall the entire operating system, or run the risk of using Toshiba Hardware Setup that does not seem to come with all the instructions and enigmatic, who wonder if I want to delete stuff 'selected', without showing me what kind of things I am alleged to have selected for removal!

  Best
  David

  If this second HDD is not so important to try to start the original installation disk Microsoft (Vista or Win7) to see if the second HDD will be recognized for the installation procedure.
  You can also try to install Win7 on this second HDD to see if the installation is correctly finalized. Later, you can check if you can start the second HARD drive preinstalled OS.

  Test just to see if this problem is related to Vista only.

• How can I get Mail stop duplication with the new Gmail application?

  I recently updated my 6 to the new Gmail app & I still have the old blue envelope Mail app... which, although is synchronized, it duplicates all my opinions and I get 2 at all but I can not remove it...

  How can I stop it notify?

  Hi x25sjhd,

  Please visit Apple support communities.

  Looks like you want to receive notifications from the Gmail app and the mailer of iOS application, but you do not want to remove your email from the Mail application account. In this case, you can disable notifications for one of these apps in settings > Notifications.

  Use the Notifications on your iPhone, iPad and iPod touch - Apple Support

  Change Notifications settings

  Some applications such as email or social media applications send frequent notifications that could affect the battery life. If you have the show on lock enabled for notifications screen, it could also affect the autonomy.

  To disable or change notifications, go to settings > Notifications and select the app. You can also sort your most recent alerts, order them manually, or group them based on the application.

  Best regards.

• Satellite Pro M30, it is recommended to install the new nVIDIA display driver?

  I own a laptop Satellite Pro M30, which includes a GeForce FX Go5200 GPU from nVIDIA. On 27 July, nVIDIA has released a new driver and related software (version 61.77), as indicated by nVIDIA, fits all the its GPU.

  I tried to install this new driver on my laptop (after removing the old driver following the instructions by nVIDIA) but it does not install. Does anyone have an idea why?

  Why the new driver is not displayed on the Toshiba support site driver for this laptop?

  Hello

  All drivers are designed and tested to laptops and Tom is right about producer for laptop. This means that you can find the download page for all drivers needed on Toshiba.

  As much I know Toshiba supports the drivers shipped with the device drivers and updates if necessary.

• Satellite A110 - switch WiFi does not work with the new WiFi card

  Hello everyone

  I have a problem with my laptop Toshiba Satellite A110 - 178 (PSAB0E). I replaced the original Intel 3945abg with Intel Link 5100 WIFI card and on the new wifi hardware wifi card switch does not work.

  New wifi card is discovered and drivers to the correct job but when I try to search with the Intel Pro/Wireless software wifi networks I message to turn on hardware switch, but there light and not work. The old wifi card swich works OK - orange light is on. On the new map light is off and swich does not work.

  Help, please

  Hello

  Do you have also enabled the WLAN functionality by pressing FN + F8?
  Check it!

  In addition, I think the case is clear: the new wireless LAN card isn't compatible with Satellite A110.
  So in my opinion, you must use remove the new card Intel and install the old card that works fine in your laptop.

• C55-A-1MW satellite does not start with the new RAM inserted

  Hey.

  I hope to find someone who can help me... I bought ram memories and tried 4 different memories in my C55 A 1MW Satellite. But each card RAM I have insert makes the computer cannot start... It lights just to stop again.

  Is there a compatibility issue or anything like that? I used 2 different aData Ram extensions cars, 1 1 and 4 GB 2 GB. the 4 GB card was 1333 mhz and was 2 GB 1600 mhz card. and I tried 2 corsair 4 GB 1600 mhz different cards.

  Is this something that makes only able to expand RAM with Toshibas own memories or is the second cardslot for broken RAM memory?

  As I see you use RAM modules with different specifications. Your problem is certainly of RAM compatibility and you must use the RAM modules with the same specifications.
  According to specification of laptop there are 4 slots of memory and laptop can handle up to 32 GB of RAM.

  The compatible RAM modules are:
  4 GB DDR3L-1600-PA5104U-1M4G
  8 GB DDR3L-1600-PA5104U-1M8G

  Of course, you can use modules from other manufacturers, but please do not use some cheap products. I can recommend the use of Kingston memory modules.

• Satellite L20: what DVD-DL is compatible with the DVD - RAM UJ-8415

  Hello

  could someone please tell me * who DVD Double-layer are compatible with the carpet * a DVD - RAM UJ-8415 * (of * Toshiba Satellite L20-112 *, * model No.) PSL2XE 00M00GGR *)?  :| According to the specification, this carpet * a DVD-RAM supports the DL technology, although in reality, it is not as simple as that. It does not burn even all DVD of 'single layer '. I've already spent a lot hell of money just trying to find the right DVD DL to be used on the machine, but unfortunately without success.

  I'd appreciate any help or advice on this subject!

  Regarding most amiable of the Germany.

  :)

  Hello

  I use a very simple freeware application called DiscInfo http://discinfo.rpc1.org/ of
  to get information about the compatible CD/DVD and disc capacity.

  Is it not all CDs & DVDs are compatible with each player. Usually, the Toshiba manual provides a list of compatible CD and DVD.
  The mediums referred to in the user manual should work for sure.

  Just FYI; found this read/write properties maximum speed:

  _ * Reading * _
  24 x Max CD-ROM
  DVD - ROM 8 x Max

  * _Write_ *.
  CD - R 24 x Max
  CD - RW 4 x Max
  DVD - R 8 x Max
  DVD - R (Double Layer) 2 x Max
  DVD - RW 4 x Max
  DVD + R 8 x Max
  DVD + R (Double Layer) 2.4 x Max
  DVD + RW 4 x Max
  DVD - RAM 5 x Max

• Web Start application is blocked with the new java 51 7 update

  Hello

  I have a problem with the java update 51, downloads and updates of the application runs without warning however, that blocked enforcement and request to check that control panel security in java configuration.

  Already added the link in the list of site exceptions, I did form recommendations on the release of the page:

  http://www.Java.com/pt_BR/download/FAQ/release_changes.XML

  Added the manifest with the permissions, but still gives the same message.

  Anyway just add to the list of job sites should not do?

  I hope someone can enlighten me, because I'm missing some details or a mistake.

  Already, he appreciates the help.

  I'm running out of ideas, unless your JNLP contradicted your manifest and specifies

  According to my interpretation of parameters of safety level in the Java Control Panel, your application should be good to go based on either the security setting or exception list on its own, without talking to each other.