Satellite Pro 4600 Sound missing after installing Windows 98SE

I have installed Windows 98SE on my 4600 whose specifications are:
Model PS460A-04163
P850 14TX 128M 20 ML DVD

I have no sound at all and all the sound options are grayed out. I have downloaded a driver from Toshiba (Yamaha AC - XG?), but it wasn't correct. Can someone point me in the right direction for the correct audio driver. I'm also not sure what "series" falls under this model. Thanks for your help. 7.

Hello

Please check this thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=84983

you will find the link to the page of the Toshiba driver where you can download a driver for this device.

Good luck

Tags: Toshiba

Similar Questions

  • Disc Association file missing after installing windows 7 SP1,.

    After installing windows 7 SP1, trying to open the drives C, D, F, I get error message cannot open, lack assocition file, can someone tell me how to solve this

    Restore the Type Associations by default Windows 7 file Extension:
    http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

    Change the programs that Windows uses by default:
    http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Satellite A500-1GH - need drivers after installing Windows

    Hi all

    I am facing a strange problem when I am trying to format my laptop.

    I boot from dvd press the option to install windows 7 and then I get the following error message:

    "Required the reader driver CD/DVD is missinjg. If you have a driver disk, CD, DVD, or USB flash drive, please insert it now.

    "Note: If the Windows installation media is in the CD/DVD drive, you can remove safely for this step.

    Start with a search on the net, I discovered that the more possible case is that the OS needs the driver HARD drive controller to continue.
    Assuming that this was the case, I downloaded from the support page, the following drivers:

    Storage Manager
    Chipset utility
    Intel Management Engine Interface and
    Intel Matrix Storage Management Utility

    After that, I extracted the executable files of the specified packages files on my USB flash drive and inserted in my Toshiba Sattelite but once again, he can not find the correct driver and displays the message:

    "No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK. »

    Am I missing a driver or what? All the world is facing this problem?

    Thanks in advance for any answer and sorry for the mistakes with my English

    What Win7 installation disc are you using?
    East - the original installation disc for Microsoft?

    I used the original installation disc Win7 and installed on a laptop more old like your A500 and everything was OK.

  • XZ029UA #ABA: missing after installing windows device driver 7

    Hello

    I installed windows 7 on my HP dv7-4285dx.

    The wireless network connection does not work.

    The following devices under 'Other devices' indicates that the drivers are not installed:

    1 Intel Centrino Advanced-N + WiMAX 6250

    Hardware ID:

    USB\VID_8086 & PID_0187 & REV_0000

    USB\VID_8086 & PID_0187

    2. network controller

    Hardware ID:

    PCI\VEN_8086 & DEV_0089 & SUBSYS_13118086 & REV_57

    PCI\VEN_8086 & DEV_0089 & SUBSYS_13118086

    PCI\VEN_8086 & DEV_0089 & CC_028000

    PCI\VEN_8086 & DEV_0089 & CC_0280

    3 PCI Simple Communications Controller

    Hardware ID:

    PCI\VEN_8086 & DEV_3B64 & SUBSYS_163D103C & REV_06

    PCI\VEN_8086 & DEV_3B64 & SUBSYS_163D103C

    PCI\VEN_8086 & DEV_3B64 & CC_078000

    PCI\VEN_8086 & DEV_3B64 & CC_0780

    4 unknown Device

    Hardware ID:

    USB\VID_138A & PID_0005 & REV_0 < 90

    USB\VID_138A & PID_0005

    4 unknown Device

    Hardware ID:

    ACPI\HPQ0004

    * HPQ0004

    Could you please share links for the above drivers?

    Thank you

    FADD

    Hello

    Please download and install #3 first, then restart. After that, install 1,2,4 and 5.

    1 and 2: article 6 of the following link:
    https://Downloadcenter.Intel.com/SearchResult.aspx?lang= & ProductID = 3199 & ProdId = 3199

    3:  Intel Management Engine Interface (MEI) driver
    https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng & DownloadType = drivers & Keyword = Intel + Management + Engine

    4. http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us & lc = on & softwareitem = ob-105093-1

    5. HP 3D DriveGuard Software:
    http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63786.exe

    Kind regards.

  • Satellite A500 TV tuner disappeared after installing Windows 7

    I bought my A500 in November 2009. It has a built-in TV tuner.

    It works perfectly on Windows Vista with very good reception on a rabbit ear antenna. I was encouraged to install Windows 7 and sent to the Toshiba drive. I loaded it and after an aborted effort, I managed.

    It works fine even if I don't see what the fuss was about. However when I plugged the antenna to go to TV via the media library... I received the message that the TV signal could not be configured as a TV tuner was not connected.

    I rebooted... nothing. I looked in the control panel... devices... nothing. I searched for devices not installed... nothing. It's as if someone has removed the tuner! (mice?) I tried to download a new driver... but this was useless because I got the same message "no tuner.

    Does anyone have an idea how to solve this problem because he had me beaten?

    Hi mate

    I think that you should first check if the BIOS is updated.
    If this isn't the case, so far.

    Then, assign the default BIOS.
    After that, restart the machine and check if the TV tuner is visible in Device Manager.

    As far as I know you can find a driver TV tuner for Win 7 64 bit, Vista 64-bit and Vista 32 bit on the European driver Toshiba page!
    If you use the Win 7 32 bit, then I recommend that you use 32 bit TV tuner driver v4.0.2007.1115 Vista

  • unknown device missing after installing windows driver 8

    I recently installed windows 8 pro to my pc and installed all the drivers but in my device manager it is now a yellow mark on the unknown device.

    Location- on PCI Express Root Complex

    Details of hardware-

    ACPI\VEN_HPQ & DEV_6000
    ACPI\HPQ6000
    * HPQ6000

    Hi TheRaven2099. First try the driver for your computer page and click on the button "Scan now" at the top left.



    HP Pavilion dv7-1240us laptop support:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & DLC = in & LC = in & Product = 3860622





    If that does not detect it, this reference may be for that.

    HP ProtectSmart hard drive protection:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & softwareitem = ob-109953-1



    Let me know.

  • Satellite A500-1GH - unknown device after installing Windows

    Hello

    I installed Windows 7 Ultimate (Genuine) installed all the drivers I could find in the Toshiba site and almost all the Windows updates, but I have a device that is not recognized:

    (1) unknown Device

    Hey,.

    Unfortunately, I think that no one here can tell you what device driver is missing exactly
    Can you post the vendor and device ID?

    Maybe this can help you a bit:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  • 4540 proBook s: unknown device missing after installing windows driver 8

    My laptop is a Probook s 4540

    I installed Windows 7 to windows 8.1 and everything went well. Now after installing all the drivers updated for my particular laptop, I have a unknown device in my device manager.

    The hardware Id are:

    ACPI\VEN_HPQ & DEV_6000
    ACPI\HPQ6000
    * HPQ6000

    I don't know what it is or a driver for it.

    No matter who else knows it or know what this device and where I can get a driver for it.

    Thank you

    Hello

    Should be HP 3D DriveGuard 5 on the following link.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229456&swItemId=ob_124200_1&swEnvOid=4158

    Kind regards

    DP - K

  • Beats Audio Control Panel missing after installing windows 8

    Hello
    I have HP h9 - 1185 at the office and I have recently installed windows 8 on it after removing Windows 7 and HP Beats Audio Control Panel is absent since then. How can I get that back?

    Hello

    Download and install the IDT HD Audio driver from the following link.

    http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59424.exe

    When the installation is complete, restart the computer.

    Kind regards

    DP - K

  • 4540 proBook s: missing after installing windows 7 Pro unknown device driver

    I have problems with driver for both devices. I don't know where to find the drivers for these two devices.

    USB controller:

    PCI\VEN_8086 & DEV_1E31 & SUBSYS_17F6103C & REV_04

    Unknown device:

    ACPI\HPQ6000

    * HPQ6000

    Please help me find the drivers.

    Thank you!

    Hello:

    You need these drivers...

    PCI\VEN_8086 & DEV_1E31:

    Download, unzip and run the setup.exe file.

    https://Downloadcenter.Intel.com/download/21129/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-7-series-C216-chipset-family

    ACPI\HPQ6000:

    FTP://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59282.exe

  • Beats audio software missing after installing windows 8.1

    Hi all!

    I have a problem I would like help with. I just upgraded to windows 8 to 8.1, but now the beats audio/software interface is missing, and I can't get it back. What should I do? I have a HP ENVY m6-k088ca Sleekbook.

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61792.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, turn off the phone by holding down the SHIFT key when you click on close to temporarily prevent a "boot hybrid.  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click set as default.

    Restart the computer again, then check if the Beats audio Panel is now listed in the control panel.

    Kind regards

    DP - K

  • Satellite A350D - wireless card disappeared after installing Windows 7

    Hi people.
    This is my first post on this forum, and it is not for a good reason.

    I installed a new copy of Windows 7 32 bit and after installation, I went to the Web from Toshiba website and download the drivers for this version of SO. Everything is great, except that the wireless LAN card reader works now. Nothing appears in the available device manager. I have no error on the system information for Windows.

    What is the problem? The wireless switch is on! FN + F8 does not work. Help me!!

    [* Device Manager: * | http://img295.imageshack.us/img295/4649/systeminformation.jpg]

    [* Information system: * | http://img218.imageshack.us/img218/6196/devicemanager.jpg]

    Hello

    Have you installed the driver Wlan?

    http://APS2.toshiba-tro.de/WLAN/?page=downloads

    Download and install the driver for your model, while installing the switch driver Wlan (if available) or by pressing FN + F8

  • Software of HP missing after installing Windows 7

    I have a HP Pavilion dv7-1245dx which had Vista 64 bit OS installed.  When I upgraded to Windows 7 64 bit OS I ended up having to do a clean installation of the operating system due to errors during the upgrade process.  Now it works correctly but I have no HP software other than the one displayed for Windows 7, I downloaded.  How can I get other software?  When I boot from the recovery cd or partition of disk option is to recover the original operating system I don't want to do.  How can I get the software because I don't have the HP recovery software more on my c drive?

    Thanks, I have now received all these.  The only thing that miss me is the HP Recovery Manager, where can I get it?

  • HP 15 laptop: Sound problems after installing Windows 10 Anniversary Edition

    A few days ago, I downloaded Windows 10 Anniversary Edition on my HP laptop 15.  This version just as an update, and it was not not clear for me until it is complete. This laptop is new to me, bought in June of this year.  Since the update, the sound quality is poor; very rough and white noise in the background.

    Don't know what to do to solve this problem.  Someone else?

    Hello

    What is your 15 HP machine?  Please follow the instructions below to find the product/model of your machine:

    http://support.HP.com/us-en/document/c00033108

    You can try:

    (a) go to the Device Manager > Sound,...

    (b) develop its pilot, right click and uninstall.

    (c) to restart the machine and wait for 5 or 10 minutes

    (d) check sound now.

    Kind regards.

  • Satellite A100-495 - black screen after installing Windows XP Home edition recovery

    After the recovery and download of updates and the XP operating system that the screen remains black, bios does not start, and XP does not start.

    What can I do?
    A I press a certain key combination?
    How can I reset the laptop again?

    Who can help quickly?

    Hello Ralf

    Stand by. If I understand you just your laptop does not work.

    What happen exactly when you press the power button / stop? You don't see anything on the screen? You see Toshiba welcome screen.
    Power is ON?
    Is there a any reaction?

    Remove the battery and leave the laptop for some time, connect the power supply only and try to start it again.
    To be honest, this whole thing is strange. Recovery image installation is not responsible for this kind of behavior. Have you done something else that may be responsible for this?

Maybe you are looking for