Satellite Pro 4600: when I use WEP, I can't do any connection more
Hey everybody,
When I connect my Tohsiba Satellite Pro 4600 via map of build-in network without WEP wireless to an AP, there is no problem, connection is establische and everything works fine.
When I use WEP, I can't do any connection more.
Is there a solution to use encryption WEP 128 bit on a portable Thosiba Pro 4600 with build-in WIFI network.
Thanks in advance
Pokettuk
What card WLan do you use?
As far as I know the laptop must be equipped with LAN Wireless / WiFi Standard: 802. 11B ORiNOCO Mini PCI card.
This card supports WEP 64 or 128 RC4 security.
Everything looks like you WLan card doesn't support the same standards of security as your WLan router. You must understand that this WLan card is an oldie about 7 years.
I think that the best solution is to use external USB WLAN which support the latest encryption standards
Good bye
Tags: Toshiba
Similar Questions
-
Satellite Pro 4600 unable to use 128-bit encryption
I have a Satellite Pro 4600 running Windows XP SP1 with the card WiFi PA0307U-1MPC. Installed all the latest drivers listed for the 4600. I can connect to networks using 64-bit encryption, but can not enter the 128-bit encryption. Is it possible to use 128-bit encryption?
Hello.
As far as I know that this unit is about 4 years old and at that time, it was impossible to use encryption 128-bit with this wireless network card and can be no change.
Good bye
-
Satellite Pro 4600 wireless error AP wep with intel
I have 3 laptops Satalite Pro 4600 with wireless.
I have work ok with AP intel. But change company wen encriptación never use WEP wireless network working again. His tent to get an ip but noting. In windows xp with or not sp2, I see the AP. But unable to connect.
Can someone help me? Thank youBonjourno,
Under WEP Wired Equivalent Privacy.In fact, you need encryption of your company information (like for example SSID) or the wireless network administrator.
If you don't have it information, you can not connect to their access Point. -
Satellite Pro L350 - when you use internet through Wi - Fi screen hangs
Recentlyt purchased by Satellite Pro L350. When to use internet through Wi - Fi screen hangs. I can not turn off.
Had to remove the battery to stop. Recharged the battery and released in market, OK for a while then same occurrence.Help!
Try to update the Firmware on your wireless access Point.
Also try updating the BIOS and LAN drivers wireless on the laptop.
-
Satellite Pro 4600: 2nd RAM slot inactive - how can I activate it?
Hello!
A few days ago, I bought a Pro 4600 opportunity with 2 x 128 MB of RAM. Two of them are working - but not together! Only the slot A working and accepting both Rams when I insert them. The user who I bought the laptop told me that they worked before it was erased from the system.How can I activate it?
Thank you very much in advance,
Flo.
Hello
It s not necessary to enable the second memory slot.
After you have installed the memory module slot should accept the module and it must be shown in the BIOS.
The two modules of work in the first place. In this case, both are ok and not in default. It is also possible to upgrade memory 256 MB.
Well, in my opinion, the second slot memory is dead.
Unfortunately, there is nothing to see :( -
Satellite Pro 4600 PS460E turns off in 3-4 minutes after the connection
My Toshiba laptop is having problem that it turned off after 3-4 minutes of connection.
He doesn't get turned off when we run it in safe mode.
Pls let me know how to troubleshooting this problem.Hello
Can you please tell us which model of laptop you have exactly? This laptop model older or newer?
-
Satellite Pro 4600, I can hear a beep
When I use my Satellite Pro 4600 to record and playback, I can hear a beep. How can I stop this?
Yes, this can happen when you use a Satellite Pro 4600 to record sound via Microsoft Sound Recorder. A beep low but regular (and irritating) occur during playback. You are using Windows 98 to Windows 2000 or?
-
Satellite Pro 4600: BSOD when I use the PCMCIA of Vodafone card
I want to use UMTS on a Toshiba Satellite Pro 4600. I got a card PCMCIA of Vodafone and installed with all updates.
But if I want to use UMTS, and that means launching the application and connect to Vodafone, Windows stops with a blue screen:
DRIVER_IRQL_not_less_or_equal STOP 0 x 0... D1, 0 X 0... 00, 0 x 0... 02, 0 x 0... 00, 0 x 0... 00.I think that the assignment of IRQS is not so good: http://img96.imageshack.us/img96/7151/toshibamw0.jpg
Hello
Have you checked if this happens with every PCMCIA card?
I noticed that the Vodafone card causes BSOD on some portable computers with CPU P4 s and activated the hyper-threading technology.
http://support.toshiba-tro.de/KB0/FAQ5300W6000YR01.htmBut there is also a problem with the firmware card Vodafone.
An update of the firmware might help.Try to contact Vodafone support for new firmware and additional details
-
Satellite Pro 4600: which adapter should I use?
I have a Satellite pro 4600, but I lost the adapter. I buy an adapter but I Don t know what to go with my PC.
Please tell me what Warner adapter I need?
example: AC ADAPTER MODEL: PA2444UINPUT: 100V-240V ~ 1, 50 - 0.85 A 50-60 Hz frequency.
OUTPUT: 15V - 4A
Toshiba code: PS460E-00GV1-SF
Thank you
Thank you google ;)
I found useful information on the Satellite Pro 4600. It seems that this laptop comes with a universal PA3048E-1ACA AC adapter.
The specifications of this adapter are: AC 100 - 240V at 50-60 Hz auto adjustment; 15V; 4 A; 706I give you a tip; Contact the ASP in your country and order one compatible!
The incorrect AC adapter can damage the motherboard of notebooks.If you order the adapter from ASP, you can be 100% sure that you will get the right one.
Concerning
-
Satellite Pro 4600: beep when the headphones are connected
Greetings to everyone.
I feel a strange audio problem with my Toshiba Satellite Pro 4600 headphone output port. Whenever headphones are used, bursts of low beep occur regularly every 3 seconds or so superimposed on what playing right now. Each burst lasts about one second and consists of about 8 fast beeps. The beeps occur after Windows starts and end once the system off. I thought that it was a driver issue, but I use the latest driver for my card, downloaded from the site Web of Toshiba (package name: s5105sndx.exe).
Can anyone help?
Thank you for your attention.
This problem doesn't appear if the headphone is plugged or also with the speakers if the headphones are disconnected?
If this happens only if the headphone is connected if there is something wrong with the headphone jack.
-
Not able to use WPA on a Satellite Pro 4600
Hi guys,.
I am not able to set up authentication WPA on my Satellite Pro 4600. This possibility is not in the network authentication drop-down list in the Properties dialog box (only open and shared).
Is there a support for WPA in the bed of the laptop LAN card?
Please help me!Map of the mini PCI WLAN driver version is: 7.16.0.189
OS: Windows XP SP2
WZC autostartThank you
merenyiaHello
Since the machine is a little older, I Don t think that your wireless network card is able to do the WPA encryption.
There should still be a way to get the WPA for you. You can switch to another card that is capable of WPA and perhaps other speeds as 54 M/bits or faster.
You can find these cards, mini-pci, for example, prices very low @ Ebay or in some computer stores.PS: It would be interesting to know what wlan card is installed on your system. So please check your device manager and tell me what type of card you have.
Welcome them
-
Hello
This is my setup
Computer: Satellite Pro 4600 model ps460e 02hyt en
Operating system: Windows XP SP3
Mini pci wireless lan card: pa3070u - 1mpc mpci3a-20My problem:
The operating system has been improved in win 98se to windows XP SP3.
The mini pci wireless lan card does not work I try to download the right drivers but I have a big problem all driver downloads does not work. I don't know the physical name of the Council.
Where can I find a solution for the update of these drivers? Is it possible that the mini pci wireless lan card does not work with windows XP SP3?Please I wait your help
Thank you
I imagine that it will be compatible with SP2 well. You can test it please and post the result?
-
Satellite Pro 4600 and WiFi configuration problem
Got a Toshiba Satellite Pro 4600, under WXP SP3. It s a P3 900 mhz with 256 RAM and it s a great laptop, but peut t seem to understand the Wi - Fi.
It captures my router ok sky open a Wi - Fi connection, but it s the config, when I put the WEP key it says it is not compatible with WEP, WPA only s.I put the ssid for the router ok but it won t accept the key/passphrase in there it says s not long enough.
Could someone point me in the direction of a guide of idiots for this configuration?
Wi - Fi is built-in and it s a Toshiba mini PCI
Thank youHello
For me the case sounds very clear;
You can't put the encryption key just because the WEP key is not compatible / supported.I think you should use encryption that is supported by both parties; router and wireless network card
Good bye
-
Cannot read DVD on Satellite Pro 4600 movies
Hello
After a clean install of Win2K on Satellite Pro 4600 I am unable to play any DVD movie. I am able to access the data of the DVD discs. The error message is:
"There is not Windows 2000 compatible compatible dvd decoder installed on this system."
I was able to play DVDs when running Windows XP.
I searched online and on these forums for an update of the software for my DVD player (model SD-C2402) but have been unable to find one. I should be grateful if you would be pointing in the right direction.
Thank you
Hello
I have good experiences with VLC media player. Try to use it.
Back to your problem. I think you need to MPEG2decoder. Googled around and look for any W2K codec pack. After installing it, I'm sure that everything will work properly and you will be able to watch DVD movies.As I wrote already test VLC media player. It's really good.
-
Satellite Pro 4600 calibrate the battery?
Hello
My Satellite Pro 4600 battery is pretty weird. I always completely load to 100%. But when I use my laptop and it reached 60-65%, it goes down to 3% of the battery. Now, I was wondering if there is a way to calibrate the battery, so he sees it as a battery of 100% full again? Anyone who can help me?
Thanks in advance
Hey,.
Tips for the battery charge.
Unplug the computer from the power adapter and turn it on. Let the computer battery power until the computer turns off, indicating that the battery is fully discharged.
Remove the battery.
Using a soft cloth, wipe the battery packs connectors and AC adapters.
Reinsert the battery.
Plug the power adapter from the computer and check the wall outlet, ensuring that the connection is firm.
When the PC is off, let the battery charge until the icon or the battery light turns green.
Disconnect the power adapter.
Remove the battery.
Wait 30 seconds and reinsert the battery.
Reconnect the AC adapter.
Let the battery recharge until the battery status light turns green or the icon appears at 100%.
Now your battery must be charged completely. Unplug the computer from the wall outlet and turn on the PC. You should notice more autonomy.
See you soon
Maybe you are looking for
-
HP PAV 15 - AB551TX i7: taken Maximum RAM supported in HP PAV 15 - AB551TX i7
Hi guys,. I am interested in buying a brand new "HP PAV 15 - AB551TX i7" but I have my doubts if it fits my needs because I have a lot of work to do on this processor. I would like to have one -computer corei7 -about 16 GB of RAM When I checked the s
-
d5000t died on the day of his birthday.
No idea why my Pavilion d5000t died almost exactly a year after I got it? It is in mode 'sleep', because he sleeps 20 minutes to save energy. When I went to wake him, he gave me the background of the login screen, but no dialog box, the mouse, the Ma
-
Can anyone help please. I used to be able to get the symbol for the pound Sterling by pressing ALT and 0163 at the same time, maybe you'll know That's how you used to make the binary code on non-electric machines punch original card. This will make
-
Eight years ago I orderred my ZD 7000 with the 4200 RPM hard drive EIDE 80 GB, the largest available at the time. The ZD served slightly and is still in very good condition, so I would like to continue using it. In fact, the original hard drive is al
-
I use Picture It Publishing Platinum 2000 and I need to upgrade the evil!
Is PictureIt! Premium 10 was last updated? I am running PictureIt Platinum 2000 edition, but I need an upgrade of the system. I know that PIPP2000 does not work on Vista or 7...